Age | Commit message (Collapse) | Author |
|
Simplify glados variants by converting to overridetree format.
Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39983
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The VR config values used in the variants' devicetrees is
identical to the domain defaults in vr_config.c, with the
exception of the icc_max value, which is calculated dynamically
based on SKU, and again matches the default values for
each domain and each varaint.
Test: add a print function to dump the VR config values for each
domain from the UPDs after setting, verify same output before/after.
Change-Id: I4307f6e19ae6f99d4f5e475b181fd66c5b92f28c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39982
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation for conversion to overridetree format, clean up
the variant devicetrees in order to minimize the differences
across glados variants. This entails:
- minor reformatting and reordering of devicetree entries
- addition of setting default values on boards which skipped them
- disabling unused I2C2 on boards which left it enabled
- ensuring TCC offset set for all SKL-Y boards
- setting VR mailbox command 1 for caroline
- skipping init for UART2 on cave and glados
- dropping unused PCIe RP5 for sentry
Change-Id: I628b20a69fab187e67901c9eb98c0e2ddcb76b0d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39981
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add HID field in max98357a_config and allow mainboards to set it.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is part of the patch series to drop support for FSP 1.1 in
soc/intel/skylake.
The following modifications have been done to migrate the board(s) from
FSP 1.1 to FSP 2.0:
- remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0)
- switch to using the FSP default VBT
TODO:
- testing
Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values are generated from the respective VBTs.
Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The InternalGfx option in devicetree.cb is not used to enable iGPU.
The patch removes this option from chip.h and mb/*/devicetree.cb
files for all boards with skl/kbl processor.
Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We had two ways to configure the serial IRQ mode. One time in the
devicetree for FSP and one time through Kconfig for coreboot. We'll
use `enum serirq_mode` from soc/intel/common/ as a devicetree option
instead. As the default is `quiet mode` here and that is the most
common mode, this saves us a lot of lines.
In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting
settings in devicetree and Kconfig. We'll maintain the `continuous`
selection, although it might be that coreboot overrode this earlier
on the kblrvps.
Note: A lot of Google boards have serial IRQ enabled, while the pin
seems to be unconnected?
Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the common VMX implementation, and set IA32_FEATURE_CONTROL
lock bit per Kconfig *after* SGX is configured (as SGX also sets
bits on the IA32_FEATURE_CONTROL register).
As it is now correctly based on a Kconfig, the `VmxEnable` devicetree
setting vanishes.
Test: build/boot google/[chell,fizz], observe Virtualization enabled
under Windows 10 when VMX enabled and lock bit set.
Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Coolstar's custom touchpad drivers for Windows require level triggering,
and the Linux drivers don't care/perform identically either way. Set
touchpad interrupt to level trigger, matching change made to other
Chromebooks.
Test: boot Windows 10 on google/chell, verify touchpad functional
Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Explicitly enable VMX, as some OSes (eg, Windows) need VMX
feature enabled and locked in order to fully support virtualization
Test: boot Windows 10 on google/chell, verify OS reports virtualization
enabled
Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of
glados Skylake reference board:
- add sentry-specific DPTF, EC config, GPIO config, Kconfig,
NHLT config, PEI data, VBT, SPD data, and devicetree
- add sentry-specific GPIO determination of which audio codec
is present
Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]
Test: build/boot google/sentry, verify correct functionality
Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27418
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|