summaryrefslogtreecommitdiff
path: root/src/mainboard/google/glados/Kconfig
AgeCommit message (Collapse)Author
2022-10-18mb/google/glados: Fix WiFi SAR optionsMatt DeVillier
SAR-related Kconfigs are only used by ChromeOS, and should be guarded properly as such (as most other boards do). TEST=build glados w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not selected. Change-Id: Id8abf68ed2e9720b5580f7965208dbe36460af07 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68458 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-20ChromeEC boards: Drop `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
This should no longer be needed because the ASL has been fixed. Change-Id: I4d1500217bef54fa3d2be397e5e2a155da3f965d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-03mb/google/glados: Drop TPM PIRQMatt DeVillier
The Infineon TPM 1.2 used on glados boards doesn't use a PIRQ; Linux only works with 'tpm.tis_interrupts=0" and Windows fails to init the TPM citing a lack of available resources. With the PIRQ removed, both Linux and Windows are happy / the TPM is available for use. Test: build/boot Linux 5.16.x and Windows 11 on google/chell Change-Id: I544695505291bbebe062df636cc8ddd139c08c2b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-31mb/**/Kconfig: Properly override `DISABLE_HECI1_AT_PRE_BOOT`Angel Pons
Don't unconditionally override `DISABLE_HECI1_AT_PRE_BOOT`. Change-Id: I7d447e73f672877c76eecea1eb8b8f41f89ce686 Fixes: commit a0d9ad322fe603d4d4cbccda9c7edcfbf0b13409 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61478 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-31mb/**/Kconfig: Properly override `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`. Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99 Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-28IASL: Ignore IASL's "Missing dependency" warningElyes HAOUAS
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects: 1) If _PRS is present, must have _CRS and _SRS 2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS) 3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS) 4) If _SRS is present, probably should have a _DIS (Remark only) IASL will issue a warning for each missing dependency. Ignore this warnings for existing ASL code and issue a message when the build is complete. Change-Id: I28b437194f08232727623009372327fec15215dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-16soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. 3. Make dt CSE PCI device `on` by default. 4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1 function disable at pre-boot instead of the dt policy that uses `HeciEnabled = 0`. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/glados/Kconfig: Select board-specific options per boardFelix Singer
Move board-specific selects out of common configuration and add them to each board where necessary. Change-Id: I70ab37588a6b08a0cc194469fd2642b3cfefe301 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-15mb/google/glados: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Change-Id: Ifccf2b3521d84f6a678872bbccf9bf390c25ce37 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-14mb/google/glados: Restore alphabetical order on Kconfig selectsFelix Singer
Change-Id: I736234b9a960c58193fcf7bc9184c9581c6c953b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-17Skylake boards: Drop setting useless `IRQ_SLOT_COUNT`Angel Pons
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ table. None of these boards do it, so specifying this value achieves absolutely nothing. Drop it to prevent further useless copy-pasting. Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-23treewide: rename GENERIC_SPD_BIN to HAVE_SPD_BIN_IN_CBFSMichael Niewöhner
The name GENERIC_SPD_BIN doesn't reflect anymore what that config is used for, so rename it to HAVE_SPD_BIN_IN_CBFS. Change-Id: I4004c48da205949e05101039abd4cf32666787df Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45147 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
Drop duplicated code for spd.bin generation that is provided globally in lib/Makefile.inc. For all affected boards it has been verified that the output binary functionally matches the original one. The changed execution order of Make instructions influenced the cbfs file order. Hence, the rom images can't be compared directly. Thus, the output files of the two timeless abuild runs have been compared. Further, it was verified that the final files in cbfs stay identical, by comparing the extracted cbfs of each board. The boards (possibly) needing modification could be found with something like this (with false positives, though): find src/mainboard -name Makefile.inc | \ xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-04-03mb/google/glados: convert to overridetreeMatt DeVillier
Simplify glados variants by converting to overridetree format. Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39983 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: disable serial console by defaultMatt DeVillier
Glados boards do not have an exposed serial port outside of the servo interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot google/chell with board defaults Change-Id: Ifad6f805e66438e2c436d9fa235d9be2ecf69179 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-02mb/google/glados: restore device-specific VBTsMatt DeVillier
When migrating glados (and variants) to FSP 2.0, the older board- specific VBTs were dropped in favor of the default FSP 2.0 VBT due to compatibility issues. Now that libgfxinit is available and the default, restore the board-specific VBTs so that external displays function properly. Select MAINBOARD_NO_FSP_GOP for all variants except glados since FSP/GOP init will not function properly with the older VBTs. Test: build/boot chell and caroline variants w/libgfxinit, verify external displays now work again. Change-Id: If55a67e0d3d78e4acf80cee1733ad8e14b8847d4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27google/glados: add libgfxinit supportMatt DeVillier
Both linear framebuffer and vga text mode verified on chell and caroline variants Change-Id: I106e7bb761055581634176a112816be8447e6745 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21mb/google/glados: port to FSP 2.0Michael Niewöhner
This patch is part of the patch series to drop support for FSP 1.1 in soc/intel/skylake. The following modifications have been done to migrate the board(s) from FSP 1.1 to FSP 2.0: - remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0) - switch to using the FSP default VBT TODO: - testing Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER is already selected in soc/intel/skylake/Kconfig Use "smm-$(CONFIG_HAVE_SMI_HANDLER)" in Makefile.inc files. Change-Id: Ia60e34ee03958b05f2ac0c326632b6dd9f02a2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
Using ${...} in some places is slightly confusing. Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree") Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-07-24google/asuka: Add as a variant of gladosMatt DeVillier
Add google/asuka (Dell Chromebook 13 3380) as a variant of glados Skylake reference board: - add asuka-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/asuka, verify correct functionality Change-Id: I591578fea2514a28c75177835807c3f250904577 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27421 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24google/cave: Add as a variant of gladosMatt DeVillier
Add google/cave (Asus Chromebook Flip C302SA) as a variant of glados Skylake reference board: - add cave-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/cave, verify correct functionality Change-Id: I5c5181ce68f7a24ccd49f53ecd9d48c081fd085a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/caroline: Add as a variant of gladosMatt DeVillier
Add google/caroline (Samsung Chromebook Pro) as a variant of glados Skylake reference board: - add caroline-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add caroline-specific memory-init param to romstage - adjust mainboard EC SCI events for boards with tablet function Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/caroline, verify correct functionality Change-Id: I611a4e76581ba2e5b42e1bc48b0a5b8c70f3598e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/sentry: Add as a variant of gladosMatt DeVillier
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of glados Skylake reference board: - add sentry-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add sentry-specific GPIO determination of which audio codec is present Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/sentry, verify correct functionality Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27418 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-21google/lars: Convert to a variant of gladosMatt DeVillier
Convert lars to a variant of glados Skylake reference board: - add lars-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add conditional generation of NHLT ACPI data for Maxim codec, including override of OEM ID and OEM table ID - remove existing lars board/directory Test: build/boot google/lars, verify functionality unchanged from pre-variant configuration Change-Id: Iab37f1b92b0f3a5d99796f916a6fdcc14ce4eef4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27413 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-21google/chell: Convert to a variant of gladosMatt DeVillier
Convert chell to a variant of glados Skylake reference board: - add chell-specific DPTF, EC config, USB port defs, GPIO config, NHLT config, PEI data, VBT, SPD data, and devicetree - add romstage handler to turn on keyboard backlight for boards so equipped - remove existing chell board/directory Test: build/boot google/chell, verify functionality unchanged from pre-variant configuration Change-Id: I7dfbafe3afcab7cee7bcb2bf91c6733c07b409c4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-21google/glados: Convert to variant setupMatt DeVillier
Convert Skylake reference board glados to variant setup in preparation for merge with existing Skylake boards chell and lars, and upstreaming of new boards asuka, caroline, cave, and sentry. The following changes have been made: - move DPTF to variant subdir - move non-common EC defs to variant subdir - adjust Kconfig for variant setup - move non-common NHLT config to variant Kconfig - make non-common NHLT ACPI code conditional - move devicetree to variant subdir - move board GPIO defs to variant subdir - move board PEI data to variant subdir - move SPD index calculation to romstage so available for dual-channel determination during PEI for boards which need it - move SPD compilation to variant makefile - add weak function for determination of dual-channel RAM - add weak function for mainboard_gpio_smi_sleep() so SKL-Y variants can override and power down rails as needed Test: build google/glados Change-Id: I41615979dc11b5a10e32d6b5f477a256735cde53 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
This patch switches the board_id and ram_code helper framework to use weak functions rather than Kconfigs to determine whether the board supplies these IDs. This cuts down on the amount of boilerplate Kconfigs many boards have to set and also gives them more flexibility, such as being able to determine at runtime whether a given ID is present. Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22695 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
Some Google boards are missing this selection, leading them to being incorrectly identified as type 'Desktop' in SMBIOS type 3 table. Correct this by adding 'select SYSTEM_TYPE_LAPTOP' to the boards' Kconfigs. TEST: boot Linux and check correct chassis type listed via dmidecode Change-Id: Ib1145e314812a3f300cfd1a435a687aa0862158a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26mb/google/*: Use newly added Chrome EC boardid functionFurquan Shaikh
Instead of duplicating code across multiple mainboards, use newly added helper function to read boardid from Chrome EC. Change-Id: I1671c0a0b87d0c4c45da5340e8f17a4a798317ca Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
Remove MONOTONIC_TIMER_MSR selection from mainboard Konfigs, as it only does a reduntant selection of HAVE_MONOTONIC_TIMER config, already selected under skylake soc Kconfig. Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20002 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20mainboard/{google,intel}: Change config option selectionFurquan Shaikh
Change config option selection from "config xyz default y" to "select xyz" if the config option has no dependencies. BUG=None BRANCH=None TEST=Verified that config option selection remains unchanged. Change-Id: I259ae40623b7f4d5589e2caa0988419ba4fefda4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18400 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31intel/wifi: Include conditionally in the buildKyösti Mälkki
Keep this enabled by default as most x86 platforms could have PCI-e slots equipped with one of these Intel WiFi adapters. The Kconfig entries under google boards had no function previously, the variable was never referenced. Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15931 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-25skylake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15822 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24google/glados: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was verified on a glados board by verifying the SSDT contents against what used to be in the DSDT. Change-Id: I710cbb8462d0fe695297102a64bec8e4212acc65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15315 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
This makes the test IDs the default, taken from depthcharge master (board/*/fmap.dts, hwid property). Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13634 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
For devices with Chrome EC, state the "board" name(s), so they're built as part of the image. A number of EC boards aren't supported in the Chrome EC master branch, they're brought along but commented out, waiting for a port to master in the Chrome EC code base. Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
Updating EC+PD takes long enough to update that it is good to show the "critical update" screen when doing an EC/PD update. BUG=chrome-os-partner:49650 BRANCH=glados TEST=Build and boot on chell in normal mode with an EC update payload and ensure that it reboots to enable graphics, shows the "critical update" screen, and then reboots to disable graphics init again. Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/322783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15google/glados: add nhlt supportAaron Durbin
Provide an option for including the NHLT blobs within the glados mainboard directory while also adding the ACPI NHLT table generation that the current hardware supports. BUG=chrome-os-partner:44481 BRANCH=None TEST=Built and booted. Headphones, speakers, and mic on camera emits and creates sound albeit not the greatest. Change-Id: I6e36c0a99a73cdcb2bf6ccfbfc886a594f989a39 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5b0383a93f054011dd7c18519ece4e6f1944366d Original-Change-Id: I6f8bd15c72fa89756382af99bddb6cb6abe89905 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313794 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12939 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-10cbfs/vboot: remove firmware component supportAaron Durbin
The Chrome OS verified boot path supported multiple CBFS instances in the boot media as well as stand-alone assets sitting in each vboot RW slot. Remove the support for the stand-alone assets and always use CBFS accesses as the way to retrieve data. This is implemented by adding a cbfs_locator object which is queried for locating the current CBFS. Additionally, it is also signalled prior to when a program is about to be loaded by coreboot for the subsequent stage/payload. This provides the same opportunity as previous for vboot to hook in and perform its logic. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. CQ-DEPEND=CL:307121,CL:31691,CL:31690 Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12689 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/skylake: mainboards: Add MAINBOARD_FAMILY kconfig entryDuncan Laurie
The family variable was not being set yet for skylake, add this to the current boards. BUG=chromium:551715 BRANCH=none TEST=emerge-glados coreboot Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311213 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05Kconfig: Remove obsolete Kconfig symbols from google/intel boardsMartin Roth
- CACHE_ROM is no longer used in the coreboot code. It was removed in commit 4337020b (Remove CACHE_ROM.) - CAR_MIGRATION is also no longer used in coreboot code - it was removed in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION) - MARK_GRAPHICS_MEM_WRCOMB was removed in commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB) Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12327 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-27google/glados: Enable TPM PIRQDuncan Laurie
Enable the config option for TPM to use PIRQ instead of SERIRQ and enable the MAINBOARD_HAS_LPC_TPM option. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-glados coreboot Change-Id: I990901117a2c478045c403f1039d6eedfc278255 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 44ecaaae1eb482ef5d4cf1e051de4571cc4441be Original-Change-Id: I115d468c72c3fd015abdddffdd1626368bfedb6e Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/304925 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12148 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-10glados: Add Board ID supportDuncan Laurie
Add support for reading board id and populating it in the coreboot tables so it is exposed to payloads. BUG=chrome-os-partner:40635 BRANCH=none TEST=boot on glados and look for reported board ID Change-Id: Iba93a913b67e3b3230aded289c2e25585dec1195 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 472cb7bc84136a1a8b284d661868e64eca4ec004 Original-Change-Id: I478dc0b2f96310b7adbd84701e70598a57306628 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297746 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-09glados: Select EC PD and call early EC initDuncan Laurie
Select the EC PD support in kconfig and call the EC early init code that will reboot into RO for recovery mode. BUG=chrome-os-partner:40635 BRANCH=none TEST=boot on glados in recovery mode Change-Id: Ifa1e2afd91a247c3830d8e705d9d34fb02239fe4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 135ef6e0e2c4864be1c25a9761e04cfe17aec51e Original-Change-Id: Iac8c092453bfbd94210462be0b377fb77410941d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297749 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11573 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the mainboards that use them. Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-20mainboard: Get CHROMEOS/MAINBOARD_HAS_CHROMEOS right (again)Alexandru Gagniuc
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig. That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I find this being used wrong. Why is this confusing/so hard to get right? Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11290 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21google/glados: add new boardPatrick Georgi
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 14:43:48 +0000