summaryrefslogtreecommitdiff
path: root/src/mainboard/google/geralt/gpio.h
AgeCommit message (Collapse)Author
2023-03-27mb/google/geralt: Set up open-drain ChromeOS pinsjason-ch chen
Set open-drain GPIOs for ChromeOS as input and bias-disable mode. After applying this patch, the voltage of these pins will become the expected value 1.8V (previously 1.0V), preventing wrong judgement of low/high. Reference document: MT8188G_GPIO_Formal_Application_Spec_V0.3 BUG=b:274058085 TEST=build pass Change-Id: I057716df6c59efb84fc395109db022b82ce528c4 Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73963 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-05mb/google/geralt: Add NAU8318 support for GeraltTrevor Wu
Add a config "USE_NAU8318" to enable NAU8318 support. NAU8318 is another speaker used in Geralt. NAU8318 supports beep function via GPIO control. So we configure the GPIO pins and pass them to the payload. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/geralt: Add MAX98390 support for GeraltTrevor Wu
Add a config "USE_MAX98390" to enable MAX98390 support. MAX98390 is an I2S smart amplifier used in Geralt. It is also the default speaker for Geralt reference board. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-09mb/google/geralt: Add power-on sequence for BOE_TV110C9M_LL0Rex-BC Chen
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the power-on sequence for BOE_TV110C9M_LL0. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-01mb/google/geralt: Add USB3 HUB reset funtion to bootblockBo-Chen Chen
After powering on the device, we need to pull USB3_HUB_RST_L up to enable USB3 Hub. TEST=boot kernel from USB ok BUG=b:264841530 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Change-Id: I8df35efb78e90a5b3314840fe2eae81d6e501242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72594 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23mb/google/geralt: Pass SD card detect GPIO to payloadsLiju-Clr Chen
1. Add an option for SD card initialization. 2. If CONFIG SDCARD_INIT is configured, pass SD card detect GPIO to payloads for SD card detection and initialize MSDC for SD card configuration. BUG=b:244250437 TEST=build pass Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Change-Id: I2d3683eb673f438c9190c11d4679a3ca97c76a98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71136 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-16mb/google/geralt: Revise the naming of MIPI PWM control GPIOLiju-Clr Chen
Rename the MIPI PWM control GPIO to be consistent with the schematic. BUG=b:244208960 TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB Change-Id: I6a3368d438cb50b257992260d1388f0b7e0f5ace Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70822 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-12mb/google/geralt: Put MIPI panel data in panel_geralt.cBo-Chen Chen
There are eDP and MIPI panels supported in geralt. We put the panels' specified functions - `power_on()` and `configure_panel_backlight()` in panel_geralt.c. Also provide the common interface `get_active_panel()` in panel.c to generalize the display initialization. Since each board may support a different set of MIPI panels, we put the MIPI data in a separate file panel_geralt.c. BUG=b:244208960 TEST=emerge-geralt coreboot Change-Id: Ie928759e020a916f29f0364201a3cf202dc512c3 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-12mb/google/geralt: Correct the backlight enabled GPIO namingBo-Chen Chen
According to the schematic, we use the same backlight enabled GPIO naming in eDP and MIPI panels. BUG=b:244208960 TEST=emerge-geralt coreboot Change-Id: If8d3ca7098c6b22af41861bba74b764d71d27e1b Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70403 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-25mb/google/geralt: Configure firmware display for eDP panelBo-Chen Chen
Add eDP panel power-on sequences and initialize the display in the ramstage. eDP panel in MT8188 EVB: "IVO R140NWF5 RH". Panel spec name: R140NWF5 RH Product Specification Firmware display eDP panel logs: configure_display: Starting display initialization SINK DPCD version: 0x11 SINK SUPPORT SSC! Extracted contents: header: 00 ff ff ff ff ff ff 00 serial number: 26 cf 7d 05 00 00 00 00 00 1e version: 01 04 basic params: 95 1f 11 78 0a chroma info: 76 90 94 55 54 90 27 21 50 54 established: 00 00 00 standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 descriptor 1: 38 36 80 a0 70 38 20 40 18 30 3c 00 35 ae 10 00 00 19 descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 descriptor 3: 00 00 00 fe 00 49 6e 66 6f 56 69 73 69 6f 6e 0a 20 20 descriptor 4: 00 00 00 fe 00 52 31 34 30 4e 57 46 35 20 52 48 20 0a extensions: 00 checksum: fb Manufacturer: IVO Model 57d Serial Number 0 Made week 0 of 2020 EDID version: 1.4 BUG=b:244208960 TEST=see firmware display using eDP panel in MT8188 EVB. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I67e0699c976c6f85e69d40d77154420c983b715e Reviewed-on: https://review.coreboot.org/c/coreboot/+/68490 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-03mb/google/geralt: Configure GPIOsRex-BC Chen
Configure ChromeOS specific GPIOs: - Open-drain pins to high-z mode: GPIO_EC_AP_INT_ODL, GPIO_GSC_AP_INT_ODL and GPIO_WP_ODL. - GPO mode: GPIO_AP_EC_WARM_RST_REQ, GPIO_EN_SPKR and GPIO_XHCI_INIT_DONE. This patch is based on MT8188G_GPIO_Formal_Application_Spec_V0.3. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I84d3f62ec8a3966fe1982d5d4cf6ff270450d4bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66274 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Configure TPMRex-BC Chen
Initialize I2C bus 1 for TPM control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If5807c9bb39260315ecbc55305def483bd2b8c51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66273 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-02mb/google/geralt: Enable Chrome ECRex-BC Chen
Initialize SPI bus 0 for Chrome EC control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6de5ea8a0273a3b0c725e4cdbcf69f4db74c5db7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 18:52:07 +0000