summaryrefslogtreecommitdiff
path: root/src/mainboard/google/geralt/chromeos.c
AgeCommit message (Collapse)Author
2023-11-22google/*: Clean up Kconfg board selection for Google MTK boardsJulius Werner
This patch tries to standardize and simplify the Kconfig option layout for Google boards with MediaTek SoCs and align them to the scheme used with other Arm-based Google boards. Change-Id: I40880e7609ba703d0053ad01da742871e54d4e7a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79063 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-07-06drivers/tpm: Move tis_plat_irq_status to cr50 driverGrzegorz Bernacki
tis_plat_irq_status() function is used only by Google TPM. It should be moved to drivers/tpm/cr50.c. The name of the function was changed to cr50_plat_irq_status(). BUG=b:277787305 TEST=Build all affected platforms Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8 Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-03-27mb/google/geralt: Set up open-drain ChromeOS pinsjason-ch chen
Set open-drain GPIOs for ChromeOS as input and bias-disable mode. After applying this patch, the voltage of these pins will become the expected value 1.8V (previously 1.0V), preventing wrong judgement of low/high. Reference document: MT8188G_GPIO_Formal_Application_Spec_V0.3 BUG=b:274058085 TEST=build pass Change-Id: I057716df6c59efb84fc395109db022b82ce528c4 Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73963 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-05mb/google/geralt: Add NAU8318 support for GeraltTrevor Wu
Add a config "USE_NAU8318" to enable NAU8318 support. NAU8318 is another speaker used in Geralt. NAU8318 supports beep function via GPIO control. So we configure the GPIO pins and pass them to the payload. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/geralt: Add MAX98390 support for GeraltTrevor Wu
Add a config "USE_MAX98390" to enable MAX98390 support. MAX98390 is an I2S smart amplifier used in Geralt. It is also the default speaker for Geralt reference board. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-16mb/google/geralt: Pass XHCI_INIT_DONE to the payloadYidi Lin
BUG=b:269059211 BRANCH=none TEST=emerge-gralt coreboot Change-Id: Ia2ec6db332939f1ac629cda9a0784a12c92d91da Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73056 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2022-12-23mb/google/geralt: Pass SD card detect GPIO to payloadsLiju-Clr Chen
1. Add an option for SD card initialization. 2. If CONFIG SDCARD_INIT is configured, pass SD card detect GPIO to payloads for SD card detection and initialize MSDC for SD card configuration. BUG=b:244250437 TEST=build pass Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Change-Id: I2d3683eb673f438c9190c11d4679a3ca97c76a98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71136 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-16mb/google/geralt: Pass GPIOs to allow backlight control in payloadsBo-Chen Chen
There are two ways to control backlight in geralt: 1. MIPI/eDP panel => control backlight via the GPIOs. (`backlight chip enable` and `PWM dimming control`) 2. eDP OLED panel => enable backlight via `backlight chip enable` and control dimming over AUX. For MIPI/eDP panels(#1), both "backlight enable" and "PWM control" GPIOs will be passed from coreboot. For eDP OLED panel(#2), only the "backlight enable" GPIO will be passed. If depthcharge successfully gets the GPIOs, it will use them to control backlight. BUG=b:244208960 TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB Change-Id: I866fa219722241008e2b0d566b29edf2f6d9321f Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70744 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Configure GPIOsRex-BC Chen
Configure ChromeOS specific GPIOs: - Open-drain pins to high-z mode: GPIO_EC_AP_INT_ODL, GPIO_GSC_AP_INT_ODL and GPIO_WP_ODL. - GPO mode: GPIO_AP_EC_WARM_RST_REQ, GPIO_EN_SPKR and GPIO_XHCI_INIT_DONE. This patch is based on MT8188G_GPIO_Formal_Application_Spec_V0.3. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I84d3f62ec8a3966fe1982d5d4cf6ff270450d4bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66274 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Configure TPMRex-BC Chen
Initialize I2C bus 1 for TPM control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If5807c9bb39260315ecbc55305def483bd2b8c51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66273 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-02mb/google/geralt: Enable Chrome ECRex-BC Chen
Initialize SPI bus 0 for Chrome EC control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6de5ea8a0273a3b0c725e4cdbcf69f4db74c5db7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-04mb/google/geralt: Add MediaTek MT8188 reference boardRex-BC Chen
Add mainboard folder and drivers for new reference board 'Geralt'. TEST=saw the coreboot uart log to bootblock BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I5e437d46097369bef535ff64e6a693b7cf67f2f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65586 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 17:45:15 +0000