Age | Commit message (Expand) | Author |
2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
2018-03-16 | mb/google/eve: Update DPTF parameters | Duncan Laurie |
2018-02-06 | mb/google/eve: Enable HotPlug on PCIe root port for WiFi | Duncan Laurie |
2018-01-30 | chromeec: Decouple EC tablet event and TBMC device | Furquan Shaikh |
2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
2017-12-07 | boardid: Switch from Kconfig to weak functions | Julius Werner |
2017-11-17 | mb/google: Add Chromebook marketing names | Jonathan Neuschäfer |
2017-11-14 | mb/google/eve: Add DSP calibration clock name/rate for RT5514 | Cheng-Yi Chiang |
2017-11-14 | mb/google/eve: Set DSP SPI clock to 12MHz | Duncan Laurie |
2017-11-14 | mb/google/eve: Enable VMX | Duncan Laurie |
2017-11-14 | mb/google/eve: Tune I2C4 hold times | Duncan Laurie |
2017-11-14 | mb/google/eve: Enable AER and LTR | Furquan Shaikh |
2017-11-14 | mb/google/eve: Use rt5663 driver and set properties | Duncan Laurie |
2017-11-14 | mb/google/eve: Remove ACPI control of touchscreen power | Duncan Laurie |
2017-10-09 | skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPI | Furquan Shaikh |
2017-10-08 | ec/google/chromeec: Add library function google_chromeec_events_init | Furquan Shaikh |
2017-09-26 | mb/google/*: Use newly added Chrome EC boardid function | Furquan Shaikh |
2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
2017-08-30 | mb/google/eve: rt5514: Add 16ms delay on dmic init | Duncan Laurie |
2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
2017-07-01 | mb/google/eve: Fix interrupt config for audio devices | Duncan Laurie |
2017-07-01 | mb/google/eve: Set TOUCHSCREEN_STOP_L GPIO to input | Duncan Laurie |
2017-07-01 | mb/google/eve: Do not limit memory speed on new SKU 5 boards | Duncan Laurie |
2017-07-01 | mb/google/eve: Implement EC device events for S3 wake | Duncan Laurie |
2017-07-01 | mainboards: Remove unused EC event for thermal overload | Duncan Laurie |
2017-05-31 | mb/google/eve: Update thermal tuning parameters | Duncan Laurie |
2017-05-31 | mb/google/eve: Add power controls to touchscreen device | Duncan Laurie |
2017-05-25 | mainboard/google/eve: Update VR config settings | V Sowmya |
2017-05-17 | mb/google/eve: Remove FPC device from SPI1 | Duncan Laurie |
2017-05-17 | mb/google/eve: Update touchpad I2C timing | Duncan Laurie |
2017-05-04 | mb/google/eve: Remove code to set keyboard backlight at boot | Duncan Laurie |
2017-05-04 | mb/google/eve: Set SUSWARN# pin to native function | Duncan Laurie |
2017-04-27 | mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c device | Wei-Ning Huang |
2017-04-24 | mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQ | Daniel Kurtz |
2017-04-24 | mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPT | Daniel Kurtz |
2017-04-24 | Kconfig: provide MAINBOARD_HAS_TPM_CR50 option | Aaron Durbin |
2017-04-20 | mainboard/google/eve: Set touchpad IRQ to level triggered | Duncan Laurie |
2017-04-15 | mainboard/google/eve: Remove 'probed' setting from rt5663 codec | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Remove ACPI ALS device | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Set UART0 to skip initialization in FSP | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPD | Duncan Laurie |
2017-04-13 | google/eve: Disable Deep S3 in AC mode | Duncan Laurie |
2017-04-13 | google/eve: Enable WiFi SAR feature | Duncan Laurie |
2017-04-13 | soc/intel/skylake: Split AC/DC settings for Deep Sx config | Duncan Laurie |
2017-04-11 | google/eve: Limit memory SKU 5 to 1600MHz | Duncan Laurie |
2017-04-10 | google/eve: Update I2C bus timing | Duncan Laurie |
2017-03-28 | vboot: Move remaining features out of vendorcode/google/chromeos | Julius Werner |
2017-03-28 | vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default | Julius Werner |
2017-03-16 | google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ | Duncan Laurie |
2017-03-15 | google/eve: Update MCU GPIOs configuration | Vincent Palatin |
2017-03-15 | google/eve: Apply default AC/DC loadline settings | Duncan Laurie |
2017-03-15 | intel/skylake: Fix bug in VR configuration with FSP 2.0 | Duncan Laurie |
2017-03-15 | google/eve: Use rt5514 instead of 4ch DMIC | Duncan Laurie |
2017-03-08 | google/eve: Configure GPIOs for new board | Duncan Laurie |
2017-02-25 | google/eve: Add rise/fall times for I2C buses | Duncan Laurie |
2017-02-22 | acpi: Add ACPI_ prefix to IRQ enum and struct names | Furquan Shaikh |
2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
2017-02-20 | google/eve: Set touchscreen I2C bus speed to 1MHz | Duncan Laurie |
2017-02-20 | google/eve: Add audio devices | Duncan Laurie |
2017-02-20 | mainboard/{google,intel}: Change config option selection | Furquan Shaikh |
2017-02-20 | google/eve: Set rise/fall timing values for I2C bus 1 | Duncan Laurie |
2017-02-20 | google/eve: Fix FPC support | Duncan Laurie |
2017-02-17 | mainboard/eve: select SOC_INTEL_KABYLAKE | Rizwan Qureshi |
2017-02-16 | mainboard/google/eve: Generate FPC device using SPI SSDT generator | Furquan Shaikh |
2017-02-14 | google/eve: change touchpad HID | Wei-Ning Huang |
2017-02-07 | google/eve: Add support for tablet mode switch. | Gwendal Grignou |
2017-02-05 | google/eve: Fix keyboard backlight enable in wake from G3 | Duncan Laurie |
2017-02-04 | google/eve: Fix DRAM DQS map | Duncan Laurie |
2017-02-04 | google/eve: Set GPIO GPP_D22 high | Duncan Laurie |
2017-01-24 | google/eve: Enable PD MCU device | Duncan Laurie |
2017-01-22 | google/eve: Fixes for devicetree settings | Duncan Laurie |
2017-01-22 | google/eve: Enable separate recovery MRC cache | Duncan Laurie |
2017-01-22 | google/eve: Enable keyboard backlight in bootblock | Duncan Laurie |
2017-01-20 | google/eve: Adjust DPTF parameters | Duncan Laurie |
2017-01-20 | google/eve: Enable ACPI keyboard backlight | Duncan Laurie |
2017-01-20 | google/eve: Enable pull-up on ACPRESENT | Duncan Laurie |
2016-12-26 | google/eve: Enable internal pull-up on PWRBTN# | Duncan Laurie |
2016-12-20 | google/eve: Fix configuration of some GPIOs | Duncan Laurie |
2016-12-16 | google/eve: Set throttle offset to 10 degrees | Duncan Laurie |
2016-12-16 | google/eve: Enable touch devices | Duncan Laurie |
2016-12-16 | google/eve: Enable native mode for UART pins in bootblock | Duncan Laurie |
2016-12-14 | google/eve: Configure I2C3 pins as GPIO inputs | Duncan Laurie |
2016-12-08 | google/eve: Add ASL code to describe SPI FPC1020 controller | Duncan Laurie |
2016-12-05 | mainboard & southbridge: Clear files that are just headers | Martin Roth |
2016-11-28 | soc/intel/skylake: Add USB Port Over Current (OC) Pin programming | Subrata Banik |
2016-11-22 | Remove explicit select MMCONF_SUPPORT | Kyösti Mälkki |
2016-11-18 | google/chromeec: Add common infrastructure for boot-mode switches | Furquan Shaikh |
2016-11-16 | google/eve: Fill out memory ID table | Duncan Laurie |
2016-11-11 | soc/intel/skylake: move i2c voltage config to own variable | Aaron Durbin |
2016-11-01 | google/eve: Add new board | Duncan Laurie |