summaryrefslogtreecommitdiff
path: root/src/mainboard/google/dedede
AgeCommit message (Collapse)Author
2023-10-23mb/google/dedede: Add HPD GPIOs on dexi variantKenneth Chan
Some Type-C monitors do not immediately assert HPD. If we enter FSP-S before HDP is asserted, display initialisation may fail. So wait for HPD. This is similar to commit b40c6009141e ("mainboard/hatch: Fix puff DP output on cold boots") on puff, except we don't use google_chromeec_wait_for_displayport() since that EC command was removed for TCPMv2 (https://crrev.com/c/4221975). Instead we use the HPD signals only. By waiting for any HPD signal (Type-C or HDMI), we skip waiting if HDMI is connected, which is the same behaviour as puff and fizz. BUG=b:303533815 BRANCH=dedede TEST=On dexi, connect a display via a Type-C to HDMI dongle and check the dev and recovery screens are now displayed correctly. Also check the logs in the following cases: Cold reboot in dev mode, Type-C to HDMI dongle: HPD ready after 800 ms Warm reboot in dev mode, Type-C to HDMI dongle: HPD ready after 0 ms Cold/warm reboot in dev mode, direct Type-C: HPD ready after 0 ms Cold/warm reboot in dev mode, direct HDMI: HPD ready after 0 ms Cold/warm reboot in dev mode, no display: HPD not ready after 3000 ms. Abort. Change-Id: Ib4fc071cac98a542072ffbeb6943bff4c988554c Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78450 Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-23mb/google/dedede/var/cret: Modify Goodix touchpad HIDDtrain Hsu
Update Goodix touchpad HID to GDIX0000 for GXTP7288 and GXTP7863. BUG=b:305118852 BRANCH=firmware-dedede-13606.B TEST=Build and touchpads are workable # evtest for GXTP7863 No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Lid Switch /dev/input/event1: Power Button /dev/input/event2: AT Translated Set 2 keyboard /dev/input/event3: cros_ec_buttons /dev/input/event4: Elan Touchscreen /dev/input/event5: GDIX0000:00 27C6:0D51 Mouse /dev/input/event6: GDIX0000:00 27C6:0D51 Touchpad # evtest for GXTP7288 No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Lid Switch /dev/input/event1: Power Button /dev/input/event10: GDIX0000:00 27C6:01F5 Touchpad /dev/input/event11: sof-da7219max98360a Headset Jack /dev/input/event12: sof-da7219max98360a HDMI/DP,pcm=2 /dev/input/event13: sof-da7219max98360a HDMI/DP,pcm=3 /dev/input/event14: sof-da7219max98360a HDMI/DP,pcm=4 /dev/input/event2: AT Translated Set 2 keyboard /dev/input/event3: cros_ec_buttons /dev/input/event4: ELAN900C:00 04F3:2E5D /dev/input/event5: ELAN900C:00 04F3:2E5D UNKNOWN /dev/input/event6: ELAN900C:00 04F3:2E5D UNKNOWN /dev/input/event7: ELAN900C:00 04F3:2E5D Stylus /dev/input/event8: ELAN900C:00 04F3:2E5D Stylus /dev/input/event9: GDIX0000:00 27C6:01F5 Mouse Change-Id: Id2a6223bdbb2f0693149136baa853ca2efb57815 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-10mb/google/dedede: Wait for HPD on dibbi variantsReka Norman
Some Type-C monitors do not immediately assert HPD. If we enter FSP-S before HDP is asserted, display initialisation may fail. So wait for HPD. This is similar to commit b40c6009141e ("mainboard/hatch: Fix puff DP output on cold boots") on puff, except we don't use google_chromeec_wait_for_displayport() since that EC command was removed for TCPMv2 (https://crrev.com/c/4221975). Instead we use the HPD signals only. By waiting for any HPD signal (Type-C or HDMI), we skip waiting if HDMI is connected, which is the same behaviour as puff and fizz. TEST=On dibbi, connect a display via a Type-C to HDMI dongle and check the dev and recovery screens are now displayed correctly. Also check the logs in the following cases: Cold reboot in dev mode, Type-C to HDMI dongle: HPD ready after 800 ms Warm reboot in dev mode, Type-C to HDMI dongle: HPD ready after 0 ms Cold/warm reboot in dev mode, direct Type-C: HPD ready after 0 ms Cold/warm reboot in dev mode, direct HDMI: HPD ready after 0 ms Cold/warm reboot in dev mode, no display: HPD not ready after 3000 ms. Abort. Change-Id: Id4657b5d5a95a68ecbd9efcf3585cf96ad1e13e1 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2023-10-09mb/google/dedede: Create dexi variantKenneth Chan
Create the dexi variant of the taranza project by copying the files to a new directory named for the variant. BUG=b:303533815 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_DEXI Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I708a16cb864dca7309cb0201e7887af7456a4885 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78249 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04mb/google/dedede/var/boxy:Enable wake on USB2/3 (un)plugJoey Peng
Set USB port which corresponds PORTSCN/PORTSCXUSB3 register bits for enable USB wake. BUG=b:302230434 TEST=Verify USB-A device could wake up Boxy Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I0f6300dc6bbb6fb8226151e49e38f0450b1e71b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78144 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04mb/google/dedede/var/taranza: Enable wake on USB2/3 (un)plugSheng-Liang Pan
Set USB port which corresponds PORTSCN/PORTSCXUSB3 register bits for enable USB wake. The physical USB slot is 6, USB2 port5 for Bluetooth, total USB2 port num is 7, USB3 keep 6. BUG=b:300844110 TEST=Verify USB-A device could wake up Taranza Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ied92c4a70bc594bd189dcb942f1a445412509464 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78068 Reviewed-by: Ricky Chang <rickytlchang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-10-03mb/google/dedede: Move selects from Kconfig.name to KconfigFelix Singer
Selects should be done in the Kconfig file instead of Kconfig.name and not mixed over both files. Change-Id: I5527d5968be35f52b912d9d6e1d9f46f24569bbc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-09-28treewide: convert to tpm_result_tJon Murphy
Convert TPM functions to return TPM error codes(referred to as tpm_result_t) values to match the TCG standard. BUG=b:296439237 TEST=build and boot to Skyrim BRANCH=None Change-Id: Ifdf9ff6c2a1f9b938dbb04d245799391115eb6b1 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77666 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-28treewide: convert to %#x hex printsJon Murphy
Convert hex print values to use the %#x qualifier to print 0x{value}. BUG=b:296439237 TEST=build and boot to Skyrim BRANCH=None Change-Id: I0d1ac4b920530635fb758c5165a6a99c11b414c8 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78183 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-26mb/google/dedede/var/taranza: Add power limits for JSL N4500 and N5100Sheng-Liang Pan
Add PLx from JSL PDG (ID: 613095) in taranza devicetree. Add ramstage.c in Makefile.inc and update Taranza power limits in taranza ramstage.c. BUG=b:296004956 TEST=emerge-dedede coreboot and check psys and PLx value on taranza Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Id43bb91bc9efb91cb074b075122cce4f22e0716c Reviewed-on: https://review.coreboot.org/c/coreboot/+/77857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-09-22mb/google/dedede: Fix SOF config for unprovisioned audio ampMatt DeVillier
Dedede boards which select AUDIO_AMP_UNPROVISIONED via fw_config use rt1015 for the speaker topology, not max98360a. TEST=build/boot Win11 on google/magpie, verify correct audio profile selected. Change-Id: I5b75bd8fd37d2837de3c5bd25a02411a6982103b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-09-18drivers/tpm: Make temp test value naming consistentJon Murphy
Make naming convention consistent across all functions return values. BUG=b:296439237 TEST=Boot to OS on Skyrim BRANCH=None Change-Id: If86805b39048800276ab90b7687644ec2a0d4bee Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77536 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-18mb/google/dedede/var/taranza: Update USB PLDsReka Norman
Update PLDs to match the port layout: Front (left to right): A4, A3, A2 Back (left to right): C0, A0, A1 BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port7/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port7 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port4 Change-Id: I682a153d6b757e1b66373c622a6fcfbf389184e3 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77877 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18mb/google/dedede/var/boxy: Update USB PLDsReka Norman
Update PLDs to match the port layout: Front (left to right): C0, A1, A0 Left side: C1 Also enable the usb 3.1 device. BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 (Ports 5 and 6 are not used on boxy but are peered by default) Change-Id: I1563d9eaa27353c8c97225a0a6ecc238e9275ce2 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2023-09-15mb/google/dedede/var/dibbi: Swap USB3 ports for A2 and A3Reka Norman
BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port5 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port4 Change-Id: I5fe8066e361da62b747464b2ec09bcc6e7dda0fe Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77867 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-14mb/google/dedede: Update dibbi ec.h settingsReka Norman
Update the dibbi ec.h so that it's correct for a chromebox. Remove everything related to: - Lid - Battery - Built-in keyboard - AC connect/disconnect - Mode changes BUG=b:294963793 TEST=Boot dibbi and check the APCI tables no longer contain lid and PS/2 keyboard devices. Change-Id: Idfa5adcec308d68555d292fddc1db43c9a64d649 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77863 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14mb/google/dedede: Use a separate ec.h for dibbi variantsReka Norman
Dibbi variants are chromeboxes, so they need different settings in ec.h. Add a new dibbi baseboard ec.h and use it for dibbi variants. For now it's identical to the dedede baseboard ec.h. It will be updated in the following CL. BUG=b:294963793 TEST=With the following CL, boot dibbi and check the APCI tables no longer contain lid and PS/2 keyboard devices. Change-Id: I4075041ab8f02026623d1a26a555bee5eb09e77b Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77782 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2023-08-31mb/google/dedede/var/pirika: Add FW_CONFIG probe for EXT_VRDaniel_Peng
Add FW_CONFIG probe for absent FIVR bypass mode on peezer. BUG=b:296982082 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot chromeos-bootimage Change-Id: I0b2053b2d732fd9462686ed7b0c9225539b28fb2 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77396 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26mb/google/dedede/var/taranza: Add Wifi SAR for taranzaSheng-Liang Pan
BUG=b:297276380 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage Cq-Depend: chrome-internal:6373154 Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: If21c7a7d329b0b1cc2c73dadb0c5b8a5b8ab27e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77399 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2023-08-24mb/google/dedede/var/boxy: Enable 100M mode blink in RTL8111H LAN LED configStanley Wu
Enable bit 9 for 100M mode green LED blink. Reference: - RTL8111H-CG Datasheet 1.92 section 7.2 for customizable led configuration BUG=b:293983804 TEST=emerge-dedede coreboot and verify LAN LED behavior Change-Id: Ice5686affcc014a2dfd35b7f579c8eaa38c2d3fe Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-08-23mb/google/dedede/var/pirika: Add USB2 PHY parameters for Type-A/Type-CDaniel_Peng
This change are added fine-tuned USB2 PHY parameters to improve the USB2 eye diagram result. BUG=b:296493887 BRANCH=firmware-dedede-13606.B TEST=Local build bios successfully. And verified the USB2 eye diagram test result. Change-Id: I915fe689883267901e8faba28632345d8c227c28 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77359 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18mb/google/dedede: Add ACPI display brightness supportMatt DeVillier
Add support for ACPI display brightness controls, so that panel adjustment is available under Windows. TEST=build/boot Win11 on google/magpie, verify panel brightness controls available and functional. Change-Id: I66daa6bbca15046994dff83bee6e7cf99aae0b33 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77271 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-15mb/google/dedede/var/boxy: update DPTF thermal settingsStanley Wu
Update DPTF thermal settings from thermal team suggestion: 1. Modify CPU passive policy to 95. 2. Modify TS0/TS1/TS2 passive policy to 90 for CPU. 3. Modify TS1 passtve policy watt to 6w. 4. Modify TS0/TS1/TS2 critical policy to 100. BUG=b:294479707 TEST=Build and verify DPTF value by thermal team on Boxy system Change-Id: Ic34e44f218ff980c54bf93841880fab5e21b3fca Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77108 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-09mb/google/dedede/var/boxy: Generate new SPD ID for CXDB4ABAM-MLStanley Wu
Generate RAM ID for CXMT CXDB4ABAM-ML DRAM Part Name ID to assign CXDB4ABAM-ML 1 (0001) BUG=b:290154780 BRANCH=dedede TEST=FW_NAME=boxy emerge-dedede coreboot chromeos-bootimage Change-Id: Ide44acf6bb8e5d5023c76d9e5e48ef113f7c6ec6 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76825 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-07mb/google/dedede/var/boxy: Update power limitsStanley Wu
Add ramstage.c in Makefile.inc and update boxy power limits in Boxy ramstage.c. BUG=b:290293153 TEST=emerge-dedede coreboot and check psys and PLx value on boxy Change-Id: I4257dab358f066ebd13b6f251e8a5258a72fbd39 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76877 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-05mb/google/dedede: Enable wake from S0ix on EC_HOST_EVENT_HANG_DETECTReka Norman
BUG=b:279097356 TEST=On dibbi: - flash OS 15449.0.0 (where suspend is broken due to b:274531972) - run `suspend_stress_test --count=1 --suspend_max=30 --suspend_min=28` - check the AP wakes up immediately when the EC detects a sleep hang Change-Id: I24a2aa5de1f76e6dd1c1ce726b648583756e5e55 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76938 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-05mb/google/dedede/var/boxy: Add power limits for N4500/N5100Stanley Wu
Add PLx from JSL PDG(ID: 613095) in boxy devicetree. BUG=b:290293153 TEST=emerge-dedede coreboot and read correct value on boxy CPU log: CPU TDP = 6 Watts, CPU PL4 = 60 Watts Change-Id: I7b063dc235fb714ba47eb620b914f2f9e92a2715 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76876 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-04mb/google/dedede/var/pirika: Support for Samsung K4U6E3S4AB-MGCLDaniel_Peng
Add the new memory support: Samsung K4U6E3S4AB-MGCL BUG=b:294151054 BRANCH=firmware-dedede-13606.B TEST=Run command "go run ./util/spd_tools/lp4x/gen_part_id.go JSL lp4x \ src/mainboard/google/dedede/variants/pirika/memory/ \ src/mainboard/google/dedede/variants/pirika/memory/\ mem_parts_used.txt" Change-Id: Ief9bbf11fc05c8155f1da7188926a29dbbfbe488 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76542 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-02mb/google/dedede/var/storo: Generate SPD ID for Samsung K4U6E3S4AB-MGCLtongjian
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for Samsung K4U6E3S4AB-MGCL. BUG=b:293240969 TEST=emerge-dedede coreboot Change-Id: I92a1f2110e74b5d25572e0e86e04b5b32112c1f5 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-01mb/google/dedede/var/cret: Generate new SPD ID for new memory partsDtrain Hsu
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. H54G56CYRBX247 2. H9HCNNNCPMMLXR-NEE 3. MT53E1G32D2NP-046 WT:B 4. K4UBE3D4AB-MGCL 5. K4UBE3D4AA-MGCR BUG=b:290811418 BRANCH=dedede TEST=FW_NAME=cret emerge-dedede coreboot chromeos-bootimage Change-Id: Ib7f23dc3604fe1869772d92c9d7b8cc32ed9bbb9 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-24mb/google/dedede: Add ALC5650 to AUDIO_AMP in devicetreeDaniel_Peng
Mapping to the fw_config of AUDIO_AMP in dedede, and set new AUDIO_AMP configuration of ALC5650 as value 4. BUG=b:284060672 BRANCH=dedede TEST=build pass Change-Id: Ic3dccd09d3ba1619cce2ac0d5f123badbeeaccdc Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-18mb/google/dedede/var/boxy: Add fw_config probe for ALC5682-VD & VSStanley Wu
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:290876132 TEST=ALC5682-VD/ALC5682I-VS audio codec can work Change-Id: Id5e0ba7a4ca57e311465ba8e74105f5ee7b8ee8a Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76435 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/dedede/var/taranza: Add more USB configurationSheng-Liang Pan
- remove usb2_ports[5] since taranza doesn't have PL2303. - add usb2_ports[6] and usb3_ports[1] for Type-A Port A4. BUG=b:288094807, b:278167978 TEST=emerge-dedede coreboot chromeos-bootimage verified all the USB port works Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7b411c21271497ba386143140aa8cfbb17a1a111 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76186 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-30mb/google/dedede/var/taranza: Disable EXT_VRSheng-Liang Pan
The taranza removed the APW8738BQBI and "disable_external_bypass_vr" should be set to "1" to disable. BUG=b:288978340 TEST=emerge-dedede coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I0a849fbfacba1d200c969c66bb058863d7ab3085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-29mb/google/dedede/var/dibbi: Update power limitsChia-Ling Hou
Add ramstage.c in Makefile.inc and update Dibbi power limits in Dibbi ramstage.c. BUG=b:281479111 TEST=emerge-dedede coreboot and check psys and PLx value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ieaff856b762b546f3e99acb7ba2ce15791193da6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75681 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede: Support variant specific power limitsChia-Ling Hou
With newer dedede design, it's required to config corresponding psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of adapter. BUG=b:281479111 TEST=emerge-dedede coreboot and check correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I583c930379233322c41027805369f81d02000ee7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-06-28mb/google/dedede/var/pirika: Add new Codec ALC5650Daniel_Peng
1.Add Codec ALC5650 setings for drivers/i2c/generic 2.Add option value '3' to AUDIO_CODEC_SOURCE for SSFC BUG=b:284060672 BRANCH=master TEST=emerge-dedede coreboot chromeos-ec chromeos-bootimage Confirm the device is existed on system. Change-Id: I39703a950620c90aa3740b7313b7d32cc68eede4 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75918 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2023-06-23soc/intel/jasperlake: Add per-SKU power limitsChia-Ling Hou
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree. BUG=b:281479111 TEST=emerge-dedede coreboot and read correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679 Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Super Ni <super.ni@intel.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-06-15mb/google/dedede/var/boxy: Update audio codec HID to use correct ALC5682I-VDKevin Yang
Boxy audio codec chip uses ALC5682I-VD, not ALC5682I-VS. It needs to modify codec HID to "10EC5682" in coreboot to fix audio no output sound issue. BUG=b:286970886 BRANCH=dedede TEST=confirm audio soundcard can be list by command "aplay -l" Change-Id: Icd69a9d757ba817b586a703a17375682db684224 Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-09mb/google/dedede/var/taranza: Update memory part and generate SPD IDSheng-Liang Pan
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL 2. K4UBE3D4AB-MGCL BUG=b:285504022 BRANCH=dedede TEST=build Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I87a4dcdb6196c3ca7bed4b5c1bc654297339c16d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75605 Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/dedede/var/boxy: Fix filename "MakeFile.inc" to "Makefile.inc"Kevin Yang
Incorrect filename "MakeFile.inc" cause gpio.c can not be complied. Rename to "Makefile.inc" and confirm gpio.c can load correctly. BUG=b:281620454 BRANCH=dedede TEST=build and confirm gpio.c can be loaded Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I39947c66de04695e5242ab1affc328894f34f9f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75520 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-15mb/google/dedede/var/taranza: Copy devicetree and GPIO from var/dibbiSheng-Liang Pan
copy from dibbi since taranza base on dibbi,this is only for first initial configuration, will update the more setting afterward. BUG=b:277664211 BRANCH=dedede TEST=build Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia319f65897c0fea2f0558c20a5bc36bb6fbaea96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-05-15mb/google/dedede/var/taranza: Generate SPD ID for supported partsSheng-Liang Pan
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. BUG=b:277664211 BRANCH=dedede TEST=build Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I6bbb67ccdd8ebc21719921d00320907f8dbb285f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74933 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-11mb/google/dedede/var/boxy: Disable EXT_VRKevin Yang
The boxy removed the APW8738BQBI-TRG and "disable_external_bypass_vr" should be set to "1" to disable BUG=b:271407334 TEST=emerge-dedede coreboot Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: Ic6667e93de41e84f67363ab7554fe755fe50684a Reviewed-on: https://review.coreboot.org/c/coreboot/+/74889 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-11mb/google/dedede/var/boxy: Update devicetree and GPIO tableKevin Yang
Create overridetree and GPIO config based on latest schematic: 1. Update PCIe ports 2. Update USB ports 3. Remove unused I2Cs 4. Remove unused peripherals (SD card, eDP, speakers) 5. Add LAN 6. Thermal policy for updated temp sensors BUG=b:277529068 BRANCH=dedede TEST=build Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I5a155ebca50dbd5bdb046713ebabbee395361273 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74626 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-05-04mb/google/dedede: Add SOF chip driverMatt DeVillier
Add all SOF chip drivers to baseboard and use FW_CONFIG to determine the correct option, to ensure the correct audio config is passed to the SOF OS drivers. TEST=build, boot Windows on several dedede variants, verify audio functional under Windows using coolstar's SOF drivers. Change-Id: I9452b11af614d8727aa8dd448e37f7a06faa450d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74818 Reviewed-by: CoolStar <coolstarorganization@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-04-22mb/google/dedede/var/boxy: Generate SPD ID for supported memory partkevin3.yang
Add boxy supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K4U6E3S4AB-MGCL 2. Hynix H54G46CYRBX267 3. Micron MT53E512M32D1NP-046 WT:B BUG=b:278983561 TEST=Use part_id_gen to generate related settings Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I317f2b31774627706babdea10776af05ab692d1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-21mb/google/dedede: Create boxy variantkevin3.yang
Create the boxy variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:277529068 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BOXY Change-ID: Ief22eb000421c23abf6de3f99eb860bdae1e7919 Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-17Makefiles: Drop redundant VARIANT_DIR definitionsKyösti Mälkki
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-17mb/google/dedede/var/boten: Generate SPD ID for supported memory partkevin3.yang
Add boten supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K4U6E3S4AB-MGCL BUG=b:278138388 TEST=Use part_id_gen to generate related settings Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I5f910393847c6494f77c009cb11f50b31bebffb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-14mb/google/dedede/var/kracko: Add G2touch touchscreen supportRobert Chen
Add G2touch touchscreen support for kracko. BOE NV116WHM-T04 V8.0 with G7500 touch panel sensor IC BUG=b:277852921 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot & test on DUT Change-Id: Ic065d5dc2900c6ccfee09031f7a80cefc391f5dd Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74307 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/google/dedede: Create taranza variantDavid Wu
Create the taranza variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:277664211 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_TARANZA Change-Id: Id64e48ff2acd6e827fe586a00376183930ddc7e1 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74295 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-31mb/google/dedede/var/kracko: Add fw_config probe for ALC5682-VD/ALC5682-VSRobert Chen
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:275644832 TEST=emerge-dedede coreboot BRANCH=firmware-dedede-13606.B Change-Id: I644f3aa3187e08146d78abb70a568833bc9b9211 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-22mb/google/dedede/var/magolor: Add FW_CONFIG probe for EXT_VRMorris Hsu
Add FW_CONFIG probe for absent ANPEC APW8738BQBI IC on magolor. BUG=b:223687184 TEST=emerge-dedede coreboot chromeos-bootimage and pass suspend_test and firmware_ConsecutiveBoot test Change-Id: I47ad313c4a14edb687913698986df9ece6cd721d Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73833 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15mb/google/dedede: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:268377440 BRANCH=firmware-dedede-13606.B TEST=Observe kernel ec panic handler run when ec panics Change-Id: I24f929ae60a406d0091956dc6cab3e2876ca23e9 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-14mb/google/dedede/var/dibbi: Configure I2C times for audioAmanda Huang
Configure the I2C bus high and low time for audio. BUG=b:271804915 BRANCH=dedede TEST=Build and confirm I2C clock for audio is between 380 kHz and 400 kHz Change-Id: I2987a39abc5527844424edfa1cf70d5c5cea5357 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-03-09mb/google/dedede/var/kracko: Generate new SPD ID for new memory partsRobert Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:272173189 TEST=run part_id_gen to generate SPD id Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-27mb/google/dedede/var/dibbi: Improve USB2 strengthAmanda Huang
BUG=b:269786649 TEST=build and test USB2 port function works fine BRANCH=dedede Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2023-02-22mb/google/dedede/var/dibbi: Enable USB2 port 6Sam McNally
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the port. BUG=b:269690930 TEST=kernel can detect a PL2303 USB device BRANCH=dedede Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-02-17mb/google/dedede/var/dibbi: Update devicetree for enabling audioSam McNally
Enable HDA device and update jack codec HID from ALC5682I-VD to ALC5682I-VS. BUG=b:268309238 TEST=kernel detects audio DSP and rt5682s BRANCH=dedede Change-Id: Icd17d5009ab8ef4711bb6c5fa414a8188fc0912f Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/google/dedede/var/dibbi: Update gpio tableAmanda Huang
Config GPP_B9 as LAN_CLKREQ_ODL based on latest schematic BUG=265021899 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: Ia099bd64364b46240e0426aa57dfe8d230e7494d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-07tree: Drop repeated wordsAlexander Goncharov
Found-by: linter Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b Signed-off-by: Alexander Goncharov <chat@joursoir.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-02mb/google/dedede/var/dibbi: Update devicetree and GPIO tableLiam Flaherty
Create overridetree and GPIO config based on latest schematic: 1. Update PCIe ports 2. Update USB ports 3. Remove unused I2Cs 4. Remove unused peripherals (SD card, eDP, speakers) 5. Add LAN 6. Thermal policy for updated temp sensors BUG=b:260934185, b:260934719 BRANCH=dedede TEST=build Change-Id: I4789be2eee1d01288031bc1e8ee5c9d6df71f9fe Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71882 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-15drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flagMatt DeVillier
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. Previously, we flagged as an error any device which set the 'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.' There's no reason to require explicit disablement however, so drop the superfluous 'disable' flag, and change the _CRS generation to check if the GPIOs will be exported via the 'has_power_resource' flag instead. BUG=b:265055477 TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only listed under PRx, not under _CRS. Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-10mb/google/dedede/var/dibbi: Generate SPD ID for supported partsLiam Flaherty
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. BUG=b:260934724, b:255447299 BRANCH=dedede TEST=build Change-Id: I8c95ced79e14bb4a99aa1fa5f4fc3bc0681cc1cc Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71710 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-09mb/google/dedede: Use runtime detection for touchscreensMatt DeVillier
Now that power sequencing has been implemented, switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. BUG=b:121309055 TEST=build/boot Windows/linux on multiple dedede variants, verify all touchscreens functional in OS, dump ACPI and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Set touchscreen IRQs to LEVEL vs EDGEMatt DeVillier
The GPIOs themselves are configured as level triggered, and the drivers (both Linux and Windows) work better with LEVEL vs EDGE triggering. TEST=tested with rest of patch train Change-Id: I212533ffdfb05f841e722c130b52c2976272e670 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Implement touchscreen power sequencingMatt DeVillier
For touchscreens on dedede variants, drive the enable GPIO high starting in romstage, then disable the reset GPIO in ramstage. This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). Since the fast majority of dedede variants have a touchscreen option, and those that do use the same GPIOs for enable/reset, set the GPIOs for touchscreen operation in the baseboard and then override for the few (3) variants that do not have a touchscreen. BUG=b:121309055 TEST=tested with rest of patch train Change-Id: Ib95e23545cc3e8589ddbd9e18cd0533bec9333e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Add method to set GPIOs in romstageMatt DeVillier
Add method variant_romstage_gpio_table() with empty weak implementation to allow variants to override as needed for touchscreen power sequencing (to be implemented in a subsequent commit). Call method in romstage to program any GPIOs the variant may need to set. TEST=tested with rest of patch train Change-Id: Ic216827a4b53d1d35913efca63a43d4672791c54 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-08mb/google/dedede: Create dibbi variantLiam Flaherty
Create the dibbi variant of the waddledee reference board by copying the template files to a new directory. BUG=b:260934018 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a includes GOOGLE_DIBBI Change-Id: I3b8d4e7f8a53323f56567cbbc03bab7f8804f286 Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71709 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22mb/google/dedede: update ACPI HID/CID for Synaptics touchpadsMatt DeVillier
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows WHQL validation tests. To ensure compatibility with both Windows and Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously done for other boards (eg, google/lulu). TEST=boot Linux 5.1x, Windows 10 on drawcia, verify all touchpad functions work correctly. Change-Id: I43eb5bc394a3fbfd4109f2e6c274ec66fc01d46d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
<device/mmio.h>` chain-include `<arch/mmio.h>: https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes Also sort includes while on it. Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-30mb/google/dedede/variants/sasukette: Disable PCIE RP8 and CLKSRC4zhourui
This change disables unused PCIE RP8 and CLKSRC4. Without this change sasukette cannot enter into s0ix properly. BUG=b:259891452 TEST=Build and verified in sasukette Change-Id: I61bcefa128d4f39613a760b647048f9e19e262c2 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-19ec/google/chromeec: Remove EC_HOST_EVENT_USB_CHARGERCaveh Jalali
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all references. BUG=b:216485035,b:258126464 BRANCH=none TEST=none Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-09drivers/i2c/sx9324: Add support for Linux's SX9324 driverVictor Ding
SX9324 driver is updated per Linux's documentation found at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml Supporting logic for the deprecated SX932x driver is hence guarded by DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER This patch by itself does not introduce functional changes to any board. The legacy SX932x Linux driver never reached upstream Linux and is only available in ChromeOS kernel fork of 4.4 and 5.4. Linux later accepted a different implementation named SX9324 and has been available since 5.4. Ideally all variants should adopt the new driver; however, during the transition phase, coreboot must support both drivers. It is better to have a single firmware build that can work with both Linux kernel drivers by specifying both sets of properties. Legacy driver support should be deleted once all variants finish migration. BUG=b:242662878 TEST=Dump ACPI SSDT then verify _DSD entries related to the legacy SX932x driver are identical w/ and w/o this patch (Tested on Craask and Nivviks) Change-Id: I42cd6841c3a270c242ed2e739db245e858eadb3b Signed-off-by: Victor Ding <victording@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69192 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-07mb/google: Probe p-sensor only for selected variantsVictor Ding
Only a subset of variants has proximity sensors. This patch by itself does not introduce functional changes to any board. It is mainly to ease migrating SX9324 from the legacy driver to the linux one - allowing gradual migration variant by variant. BUG=b:242662878 TEST=Dump ACPI SSDT then verify they are identical w/ and w/o this patch Change-Id: Ic00e0d9eafcef2c9eaf32571fecf6190777cec36 Signed-off-by: Victor Ding <victording@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69191 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-20mb/google/dedede: add VBTs for drawcia, mangolor variantsMatt DeVillier
Add VBT data files, ensure secondary VBTs compiled in as needed, select INTEL_GMA_HAVE_VBT. TEST=build/boot drawcia, mangolor variants with FSP/GOP display init and edk2 payload Change-Id: I58a2ed59bd858ce772e92f6659d341036823b11a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-18mb/google/dedede/var/storo: Disable PCIE RP8 and CLKSRC4Zanxi Chen
This change disables unused PCIE RP8 and CLKSRC4. Without this change storo cannot enter into s0ix properly. BUG=b:219376808 TEST=Built and verified in storo Change-Id: I9867825ce53de72ef73920c153002bc3be4dbd2d Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Aamir Bohra <aamirbohra@google.com>
2022-10-18mainboard/google: Remove ACPI ALS deviceGwendal Grignou
Remove the ACPI ALS device from the EC configuration for newer devices, because some do not have light sensors, and those who do have their ALS presented through the new EC sensor interface already. Inspired from commit ("f13e2501525f ("UPSTREAM: mainboard/google/eve: Remove ACPI ALS device") BUG=b:253967865 BRANCH=none TEST=Boot a device and ensure that 'acpi-als' device is not present in /sys/bus/iio/devices. Change-Id: Ibcfa9e8c5a4679d557150998fd255789d3f8a272 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68493 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-18mb/google/dedede/var/beadrix: Update SoC gpio pin of USB cameraTeddy Shih
Update SoC GPIO setting of camera according to beadrix schematics. GPP_D13 : NC -> PLTRST (EN_PP2800_CAMERA) BRANCH=dedede BUG=b:247178737,b:244120730 TEST=on beadrix, validated by beadrix seconds_system_resume < 500 ms. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Id00cb85cdad900c03842ad69707966aa62410efd Reviewed-on: https://review.coreboot.org/c/coreboot/+/68129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Simon Yang <simon1.yang@intel.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
2022-10-17mb/google/dedede: Guard FMD selection with CHROMEOSMatt DeVillier
Allows dedede boards to use coreboot-generated FMAP layout when building for non-ChromeOS target. TEST=build/boot dedede with edk2 payload, non-ChromeOS build Change-Id: Icb975455cde0d75a5af9130ba3e82a4fb0df5613 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-17mb/google/dedede/var/pirika: Add fw_config probe for ALC5682-VD & VSFrankChu
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:244620955 TEST=ALC5682-VD/ALC5682I-VS audio codec can work Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ia6cb56e76bc4e245a32f29b19226fa4fae330c92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
2022-09-27mb/google/dedede: rename baseboard GPIO table getter for clarityMatt DeVillier
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the GPIO table comes from the baseboard, and is overridden by a separate table from the variant. Drop the __weak qualifier as this function is not overridden. Change-Id: I11814016d654bc2c2e6d24b3d18fb30d5b843fe9 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-23mb/{google,intel}/*/ec: Decrease loglevel of init messages to BIOS_INFOElyes Haouas
BIOS_ERR is inappropriate since the init message is informational. Use BIOS_INFO instead. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I6fc15291a6d177a1b9e258d08e165224e5e10b32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67733 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-20mb/google/dedede: Resume from suspend on critical batteryIvan Chen
This patch makes dedede EC wake up AP from s0ix when the state of charge drops to low_battery_shutdown_percent. Demonstrated as follows: 1. Boot OS. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 4. 4. System resumes. BUG=b:244253629 TEST=Verified on dedede Change-Id: I39234d2b9e739383b5f96be49077f8c9831fa0fa Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-20mb/google/dedede/var/boten: Turn off camera during S0ixKarthikeyan Ramasubramanian
Add a variant specific S0ix hook to fill the SSDT table to disable and enable camera during suspend and resume respectively. BUG=b:206911455 TEST=Build Boten BIOS image. Ensure that camera is disabled during suspend and enabled during resume. Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
2022-09-14mb/google/dedede/variants/shotzo: Turn off LAN power in S0ixTony Huang
Turn off the LAN power which is controlled by GPP_A10 in S0ix states. For an USB device, the S0ix hook is needed for the on/off operationas to take place. BUG=b:245426120 BRANCH=firmware-dedede-13606.B TEST=emerge-shotzo coreboot check LAN LED off in S0ix states check LAN function ok after suspending 500 loops check SSDT table has MS0X entry Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) { \_SB.PCI0.CTXS (0x41) } Else { \_SB.PCI0.STXS (0x41) } } } Change-Id: I3fcab4a73239b4f006839c0c81e9b4cc74047b77 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-13mb/google/dedede: Generate MS0X entry and provide variant hookTony Huang
BUG=b:245426120 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot check SSDT table has MS0X entry Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) {} Else { } } } Change-Id: Id01089531503e62231c5ab19e4cd8056198b9acb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-09mb/google/dedede/var/shotzo: Config I2C times for touchscreen/audioTony Huang
Config I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). EE measured touchscreen/audio runs at 385.5/397.9kHz after tuning. BUG=b:244403643 BRANCH=firmware-dedede-13606.B TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: I7d9503e5f92295432e31f09ae791eaa18eac9d4d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
Historically, ChromeOS devices have worked around the problem of OEMs using several different parts for touchpads/touchscreens by using a ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel) to indicate that the device may or may not be present, and that the driver should probe to confirm device presence. Since c636142b, coreboot now supports detection for i2c devices at runtime when creating the device entries for the ACPI/SSDT tables, rendering the 'probed' flag obsolete for touchpads. Switch all touchpads in the tree from using the 'probed' flag to the 'detect' flag. Touchscreens require more involved power sequencing, which will be done at some future time, after which they will switch over as well. TEST: build/boot at least one variant for each baseboard in the tree. Verify touchpad works under Linux and Windows. Verify only a single touchpad device is present in the ACPI tables. Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-04mb/google/dedede/var/shotzo: Update DPTF parametersTony Huang
Update DPTF parameters from internal thermal team. BUG=b:244373677 BRANCH=firmware-dedede-13606.B TEST=Build image and verified by thermal team. Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-21mb/google/dedede/var/shotzo: Enable ILITEK touchscreenTony Huang
The current reset delay is not enough to make touchscreen IC ready, ILITEK feedback their requiremt is 400ms in spec T2. After changing the reset_delay_ms and check touchscreen works, ILITE also change the IRO to low level trigger. This CL is to reflect that. BUG=b:235929123 BRANCH=firmware-dedede-13606.B TEST=check touchscreen function work Change-Id: I126b2d74c1d7a1799e2f67a8ab01cba074447c06 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
It is highly unlikely that the "OEM revision" of the DSDT is 0x20110725 on mainboards with a chipset not yet released on 2011-07-25. Since this comment is most likely to have been copy-pasted from other boards, drop it from boards which use a chipset newer than Sandy/Ivy Bridge. Change-Id: If2f61d09082806b461878a76b286204ae56bf0eb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-08-16mb/**/dsdt.asl: Drop superfluous commentsAngel Pons
These comments don't add much value, so remove them. Change-Id: I7e9692e3fe82345cb7ddcb11c32841c69768cd36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66713 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-08-03mb/google/dedede/var/beadrix: Update SoC gpio pin of DMICTeddy Shih
Update SoC GPIO setting of unused DMIC channel according to beadrix schematics. GPP_S2 : NF2 -> NC (DMIC1_CLK) GPP_S3 : NF2 -> NC (DMIC1_DATA) BUG=b:203113413, b:237224862 BRANCH=None TEST=on beadrix, validated by beadrix's DMIC working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ibe2f432cd74b546218ff4ee6e428e9eed9ac611f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-03mb/google/dedede/var/drawcia: Add Wifi SAR for oscinoShon Wang
Add wifi sar for oscino BUG=b:240373077 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:4893022 Change-Id: I44cbe8ee08d6136ed116623046893c9749795e50 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66176 Reviewed-by: Ivan Chen <yulunchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-03mb/google/dedede/var/beadrix: Update SoC gpio pin of BC1.2Teddy Shih
Update SoC GPIO setting of adding BC1.2 SLGC55545 according to beadrix schematics. GPP_A18 : NC -> NF1 (USB_OC0_N) BUG=b:214393595, b:226294980 BRANCH=None TEST=on beadrix, validated by beadrix's Type A working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: I746931582cc12f49f7f1c667563350ebac8ddfa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-02mb/google/dedede/var/pirika: Add Elan touchscreen supportFrankChu
Enable I2C2 and register touchscreen ACPI device for pirika. BUG=b:236564261 TEST=touch screen is functional. Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Id2fd5606b7126eabc1c88bf516198ff00b5d75dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-07-29mb/google/dedede/var/drawcia: Enable weida touchscreenShon Wang
Add weida touchscreen support for drawcia. BRANCH=dedede TEST=Build and verify that touchscreen works on drawcia. Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471 Reviewed-by: Ivan Chen <yulunchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:58:57 +0000