summaryrefslogtreecommitdiff
path: root/src/mainboard/google/dedede
AgeCommit message (Collapse)Author
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5482f44b361925b7d2dbcbf1065c1be035c68b0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49424 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede/var/boten: Update gpio config for botenStanley Wu
Correct GPIO settings as below reason: 1. GPP_G7 not being used but set to NF. 2. GPP_C22 and GPP_C23 is set to NC but internal pull down to 20K BUG=b:177283756 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Change-Id: Idf25674efa2336bde98c5abaff278484fd71ea8b Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Replace generic driver with sx9324 driverStanley Wu
Replace i2c driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:175932166 BRANCH=dedede TEST=run "i2cdump -y -f 15 0x28" to confirm registers as except. un-approach: => register address: 0x01 value: 0x00 approach: => register address: 0x01 value: 0x02 Change-Id: I0c8b5948266a07092799c6db556383fa08b924e6 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Update gpio settingStanley Wu
Correct GPIO settings as below reason: 1. GPP_D19/GPP_D20/GPP_D21 not being used but set to NF. 2. GPP_B7 should configure as WWAN SAR detect ODL, but set to NC BUG=b:175932166 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id7780d5332551ed3fd20ef14f8b5d31164f16385 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-19mb/google/dedede: Create sasukette variantTao Xia
Create the sasukette variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:175848514 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_SASUKETTE Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I0a554efe0919dc2f5880f0f7817a37bd4be88ed9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-19mb/google/dedede/var/sasuke: Add LTE modem supportSeunghwan Kim
This change enables LTE modem for sasuke. - Add LTE modem device into devicetree - Add GPIO control for LTE modem power on and off BUG=177177967 TEST=Built and verified modem device existence with lsusb Change-Id: I34ba8ab00b73f24d1786ab014e9981b172a63a27 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49163 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/sasuke: Enable Wifi SAR for sasukeSeunghwan Kim
BUG=None BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:3531583 Change-Id: If69258db257353c9b859a27e2a4c088f74b00ab9 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49466 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/lantis: Update DPTF parametersTony Huang
DPTF paramerters from thermal team. 1. PL1 max =5.8W 2. PL1 min =3.8W 3. PL2 =20W BUG=b:177249297 BRANCH=dedede TEST=build image and verified by thermal team. Change-Id: I19654b65613817ebecf979ce7ac4f76d370ebdc2 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-18mb/google/dedede/var/sasuke: Disable PCIE RP8 and CLKSRC3Seunghwan Kim
This change disables unused PCIE RP8 and CLKSRC3. Without this change sasuke cannot enter into s0ix properly. BUG=b:176862270 TEST=Built and verified entering s0ix Change-Id: I0828813ed7924669cb0ff97be2565579762c810f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49300 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/dedede/var/sasuke: Add USB2 PHY parametersSeunghwan Kim
This change adds fine-tuned USB2 PHY parameters for sasuke. BUG=176060155 TEST=Built and verified USB2 eye diagram test result Change-Id: Id374ed238d92077ca28c1162fd9f070029ee71bd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49321 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/dedede/var/boten: Update LTE GPIO configurationKarthikeyan Ramasubramanian
LTE module is not expected to be powered off during warm reset. Hence configure the LTE_PWR_OFF_ODL (GPP_A10) gpio pad reset configuration to PWROK and set the TX state to 1. BUG=b:163100335 BRANCH=dedede TEST=Verified through the waveforms that power sequence is meeting the LTE module requirements. Change-Id: I8676da6186559288aabe078b6158fc01075c7b41 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-15mb/google/dedede/var/metaknight: Add LTE power on/off sequenceTim Chen
LTE module used in metaknight has a specific power on/off sequence. GPIOs related to power sequence are: * GPP_A10 - LTE_PWR_OFF_R_ODL * GPP_H17 - LTE_RESET_R_ODL 1. Power on: GPP_A10 -> 20ms -> GPP_H17 2. Power off: GPP_H17 -> 10ms -> GPP_A10 3. Warm reset: GPP_A10 keeps high, GPP_H17 goes low at least 2ms Configure the GPIOs based on these requirements. BUG=b:173671094 TEST=Build and boot Metaknight to OS. Ensure that the LTE module power sequence requirements are met. Change-Id: Ibff16129dfe2f1de2b1519049244aba4b3123e52 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-14mb/google/dedede/var/boten: Support ELAN i2c-hid touchscreen for botenflexStanley Wu
Update ELAN i2c-hid touchscreen configuration BUG=b:172517685 BRANCH=dedede TEST=Verify touchscreen is working fine on botenflex Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ia7c81fd0a772968ec32406f1e366a90481fc5ad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-11mb/google/dedede/var/magolor: Remove the unused touch controllerRen Kuo
Remove unused touch controller - Goodix BUG=None BRANCH=dedede TEST=build firmware Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I2a01666bc1e353e21ddf961a0eb721a0cb4013db Reviewed-on: https://review.coreboot.org/c/coreboot/+/49221 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/dedede/var/sasuke: Add internal USB camera supportSeunghwan Kim
This change adds internal USB camera into devicetree for sasuke BUG=None TEST=Built and checked camera device existence with lsusb Change-Id: I51b9bb174205d984f1d060afd603f1d087095645 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49162 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/dedede/var/sasuke: Enable ELAN touchpadSeunghwan Kim
This change adds ELAN touchpad into devicetree for sasuke. BUG=None TEST=Built and verified touchpad function Change-Id: If9c25f23ee1c0e88382fff036f77a6753775b81e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Enable audio featureSeunghwan Kim
This change adds DA7219 audio codec and MAX98360A amplifier for sasuke. BUG=None TEST= Built and heared speaker sound on OS Change-Id: Ib48eb74fbfe171d46d0d23859057ba169b56bde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Configure GPIO NC padsSeunghwan Kim
Configure GPIO NC pads for sasuke. BUG=b:172104731 TEST="FW_NAME=sasuke emerge-dedede coreboot" Change-Id: I3bf8f97708536010da82402ea3d49e387e732d61 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede: Enable "FastPkgCRampDisable" upd for noise mitigationMaulik V Vaghela
As part of acoustic noise mitigation calibration, we need to enable FastPkgCRampDisable upd along with slew rate = 1. This values has been derived based on noise calibration done. Please refer document 575216 for procedure. BUG=None BRANCH=dedede TEST=correct value has been programmed and slew rate measurement is correct on scope. Change-Id: Ie42c8ab647ff42fa043b6f717a9834f9b9c551f6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-07mb/google/dedede: Add support for charger throttlingSumeet Pawnikar
Add charger current throttling support for dedede baseboard BUG=None BRANCH=None TEST=Built and tested on boten system Change-Id: I79edba579249111294a982590660196f05be7eaf Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/dedede/var/metaknight: update Goodix touch screen sequenceTim Chen
Update Goodix touch screen reset delay time to 180ms. BUG=b:176213670 TEST=Build and boot Metaknight to OS. Change-Id: I5801a36fb7c03b23046df16b1eaf4c548241bba5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/magolor: modify raydium touch screenRen Kuo
modify raydium touch screen power on timing to meet requirement BUG=b:174280232 TEST=build firmware and measured the timing Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3ecc9d8e21f8c76e9e96cf050dcde83c3c4f4ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48971 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/dedede/var/metaknight: Configure I2C high and low timesTim Chen
Configure the I2C bus high and low times for port0,2 and 4 I2C buses. BUG=b:176519792 TEST=Measured the I2C bus frequency lower than 400 KHz. Change-Id: Ieed038c93f0972c06cb3fa311742dd22ac2e875d Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/madoo: Update Goodix touchscreen power sequenceDtrain Hsu
Follow Goodix datasheet (GT7375 Programming Guide_Rev.0.1.pdf and GT7375P Programming Guide_Rev.0.6.pdf) to tune touchscreen power sequence. Increase reset_delay_ms from 120ms to 180ms. BUG=b:176511605 BRANCH=dedede TEST=Build and boot Madoo to OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iae35e4da31a3c3afd24c7daf81a5a3e762acd3b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-07mb/google/dedede/var/boten: Configure I2C high and low timeStanley Wu
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:168783630 TEST=Measured the I2C bus frequency reduce to 387 KHz. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I37403dd3ac3c9320398207d2111e1ddb73d6a130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchscreen/audioTony Huang
Config I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). These tuning value is applied from touchpad as a base line, and EE measured touchscreen/audio runs at 399/396.7kHz after tuning. BUG=b:173709409 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: I970d69e6361d7cf6fcfc4e5b0b3c5fbfa885367c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchpadTony Huang
BUG=b:173709409 BRANCH=dedede TEST=EE measured result is 390.8kHZ Change-Id: I7a6475fd29d4c9f8efa78a42a112b5565511b939 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-25mb/google/dedede: Update galtic device treeFrankChu
Update galtic device tree override to match schematics. BUG=b:170913840 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I270cd2a9783030ad3a080b9cfda8a133e801c5ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/48656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21mb/google/dedede/var/storo: Generate SPD ID for supported memory partsTao Xia
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: MT53E512M32D2NP-046 WT:E H9HCNNNBKMMLXR-NEE MT53E1G32D2NP-046 WT:A H9HCNNNCPMMLXR-NEE BUG=None TEST=Build the storo board. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ifd935865927bb9fccf95eb4924ca6986d0c19442 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21mb/google/dedede: Update Boten setting for USI PEN detection.rasheed.hsueh
Update devicetree and gpio driving of boten that enable stylus PEN detect signal is not dual-routed on Boten. Since the gpio_keys kernel driver expects the pad to be owned by GPIO controller (i.e. configured for GPIO IRQ), it cannot be configured for ACPI (i.e. SCI). Thus, this change updates the GPIO configuration for GPP_C12 to PAD_CFG_GPI_GPIO_DRIVER and device tree entry for PENH device to use WAKEUP_ROUTE_GPIO_IRQ. Additionally, the signal is marked as active low in the device tree entry to indicate to the kernel driver that the signal is inverted. Not dual routing the signal results in wake source not being added to eventlog when pen removal results in wake from S0ix. BUG=b:160752604 BRANCH=dedede TEST=Build and check behavior is expected. Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I74a17088da64c22ef1c74d201c80274fc65a44c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21Revert "mb/google/dedede: Update Imon slope and Offset Value for Drawcia"Maulik V Vaghela
Falling back to default values for Imon slope and offset for Drawcia This is as per recommendation from ODM based on calibration This reverts commit 2ac88f2347352c5dff0af18d5130dbdd6f032930. BUG=b:175629526 BRANCH=dedede TEST=Debug FSP confirms that values are reverted to default Change-Id: I605acdcd0de2c5dfc28af2aea8cefc6b629c0925 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48737 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/dedede: Add GPIO to galtic supportFrankChu
Add support for gpio driver for galtic BUG=b:170913840 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I01bb95545705efab1a2adf1582b6293fd89e6420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48684 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/dedede/var/madoo: Configure Acoustic noise mitigation UPDsDtrain Hsu
Enable Acoustic noise mitigation for madoo and set slew rate to 1/8 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:173765599 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I968d8d43016e3569835b0a777335fa1d5c135f87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21mb/google/dedede: Update SPD table for galticFrankChu
galtic memory table as follow: value Vendor Part number 0x00 MICRON MT53E512M32D2NP-046 WT:E 0x00 HYNIX H9HCNNNBKMMLXR-NEE 0x01 MICRON MT53E1G32D2NP-046 WT:A 0x02 HYNIX H9HCNNNCPMMLXR-NEE BUG=b:170913840 BRANCH=none TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I30b8fe3f14e1af7bb5760530477f9311c6a4ee62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-16mb/google/dedede/var/magolor: Add Wifi SAR for magolor and magliaRen Kuo
Add wifi sar for magolor and maglia: Using tablet mode of fw config to decide to load custom wifi sar or not. same wifi sar value for magolor and maglia (shared firmware) BUG=b:173001370, b:173001251 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:3453724 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I44ab68c9ee5deced90d3858161571ab4b39b4c8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48448 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-16mb/google/dedede/var/sasuke: Add memory part and generate DRAM IDSeunghwan Kim
This change adds memory part used by variant sasuke to mem_part_used.txt and generates DRAM ID allocated to the part. BUG=b:172104731 Change-Id: Ie8d66261cb5b4493afb1c677839f807bca994af5 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48451 Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/dedede: Update Boten GPIO setting for PEN detection.Stanley Wu
AP_PEN_DET_ODL isolated by a diode and need to pull up internally. BUG=b:160752604 BRANCH=dedede TEST=Build and confirm waveform by google EE parter. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I85f3d0209094af07891a5c0cc218443da586e6e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48294 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/dedede/var/metaknight: Support Elan/Synaptics touchpadTim Chen
Add Elan and Synaptics touchpad settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ice0a86cd5610db269d44acb1d51cb652110d9b0c Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-09mb/google/dedede/var/metaknight: Add audio related settingsTim Chen
Add HDA,speaker codec and speaker amp settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: I9b1057eac94b568914f17fcccee58a0e403ccec0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05mb/google/dedede: Create storo variantTao Xia
Create the storo variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:174284884 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_STORO Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I5ad41e0b2bc95b44733a2ad3c543267f3f56f9e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-12-05mb/google/dedede/var/drawcia: Configure Acoustic noise mitigation UPDsMaulik V Vaghela
Enable Acoustic noise mitigation for drawcia and set slew rate to 1/4 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:162192346 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Change-Id: Iadcf332d59dac2ba191b82742a18a1ab326940d1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-02mb/google/dedede/var/drawcia: Support VBT for DrawmanKarthikeyan Ramasubramanian
Default VBT supports only integrated Display port. Drawman supports a HDMI port and hence support a separate VBT for Drawman. BUG=b:161190931 BRANCH=dedede TEST=Build and boot to OS in Drawlat and Drawman. Cq-Depend: TBD Change-Id: I8895cc67d87428eddb31328f1e3a90c346b54533 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-12-02mb/google/dedede: Add Daughter-board FW_CONFIG in devicetreeKarthikeyan Ramasubramanian
Add daughter-board ports bit field and mask in devicetree. BUG=b:161190931 BRANCH=dedede TEST=Build and boot to OS in drawlat & drawman. Change-Id: Ibbd86fc8c3e44a7d1703b8ce75c48881226545c9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-12-02mb/google/dedede/var/lantis: Configure IRQs as level triggered for HID over I2CTony Huang
Config HID-I2C device to level trigger. As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:171546871 TEST=emerge-dedede coreboot Change-Id: If8be25f591715765a99920b79482c862b1cc7079 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-30mb/google/dedede: Update Imon slope and Offset Value for DrawciaMeera Ravindranath
Updating Imon slope and offset values as per recommendation of ODM based on calibaration. Updating Imon slope to 1.0 and offset to 1.4 BUG=b:167294777 BRANCH=dedede TEST=Boot dedede platform and confirm values in FSP. Change-Id: I3eb32218040163f0abef9b8dd4c52efb16289fe7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vinay Kumar <vinay.kumar@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-11-30mb/google/dedede: Create sasuke variantRaymond Chung
Create the sasuke variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:172104731 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_SASUKE Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Change-Id: I29405d63fd266224807e535c3f86a2ad5ab8cdf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: SH Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-25mb/google/dedede: Create galtic variantFrankChu
Create the galtic variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.3.1). BUG=b:170913840 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_GALTIC Signed-off-by: FrankChu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ie7534d56bc67aca4484f40af1221d669addc01fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/47900 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20mb/google/dedede/variants/madoo: Increase TCC offset from 5 to 10John Su
Increase TCC offset value from 5 to 10 for Thermal Control Circuit (TCC) activation. BUG=b:171531244 TEST=build and verify by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic2822b059f166779e1f0bcf92e753dad1078783c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47691 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/google/dedede: Modify flash layout to add ME_RW_A/B regionsV Sowmya
Existing implementation adds the CSE RW update binary to FW_MAIN_A/B regions and this has significant impact on boot time due to the increase in the size of these regions leading to higher loading and hashing time. This patch modifies flash layout to add new ME_RW_A/B fmap regions in the RW_SECTION_A/B. BUG=b:169077783 TEST= Built for dedede. Verified that CSE RW binary is added to the CSE_RW_A/B fmap region. Change-Id: I23a3e22a569488b39beb4d12f5b6309c7c742992 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-17mb/google/dedede/var/metaknight: Add touchscreen settingsTim Chen
Add Elan and Goodix touchscreen settings. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ib2acd31a8076533c3b927d37127e7d27bac0bb57 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-16dedede: Create lantis variantTony Huang
Create the lantis variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:171546871 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_LANTIS Change-Id: Ie3d15a687b870afc7d8bbeb6b5cab0792650da31 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/dedede: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=emerge-dedede coreboot Change-Id: I9d8fa57ae0f554896a4a0722e3e89567676382d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/dedede/var/metaknight: enable USB2 port for cameraTim Chen
Enable USB2 port 5 for user facing camera. Enable USB2 port 6 for world facing camera. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Iecb7787d46eab7096dec9f838a16da101105e09a Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-13mb/google/dedede/var/metaknight: Disable I2C port 3Tim Chen
Disable I2C port 3 for metaknight BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ic4a056d53a8c8abd04a9b786428da0986a255276 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09mb/google/dedede/variants/magolor: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for magolor board. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=b:168353037 BRANCH=None TEST=Build and test on magolor board Change-Id: I74e960de506d366cba2c8aefb23f9e69337fd163 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09mb/google/dedede/var/boten: Add LTE power on/off sequenceKarthikeyan Ramasubramanian
LTE module used in boten has a specific power on/off sequence. GPIOs related to power sequnce are: * GPP_A10 - LTE_PWR_OFF_R_ODL * GPP_H17 - LTE_RESET_R_ODL 1. Power on: GPP_A10 -> 20ms -> GPP_H17 2. Power off: GPP_H17 -> 10ms -> GPP_A10 3. Warm reset: Power off -> 500ms -> Power on Configure the GPIOs based on these requirements. BUG=b:163100335 TEST=Build and boot Boten to OS. Ensure that the LTE module power sequence requirements are met. Change-Id: Ic6d5d21ce5267f147b332a4c9b01a29b3b8ccfb8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede: Add support for variant specific SMI sleep flowKarthikeyan Ramasubramanian
This support is required to power off certain components that exist only in certain variants. BUG=None TEST=Build and boot Boten to OS. Change-Id: Ib43ada784666919a4d26246a683dad7f3546fabb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede/var/drawcia: Remove camera EEPROM power resourceKarthikeyan Ramasubramanian
EEPROM in the camera module does not require any specific power resources. This will ensure that no unnecessary resources are turned on while accessing the camera EEPROM. BUG=b:167938257 TEST=Build and boot to OS in Drawlat. Ensure that the camera EEPROM is listed in the output of i2cdetect. Change-Id: Iece9b3f657bf94a21cc08bf1745353575858f9b2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede: Enable Wake on AC connect and disconnectKarthikeyan Ramasubramanian
Handle AC connect and disconnect notifications from Embedded Controller (EC) and wake from S3/S0ix. BUG=b:172266344 TEST=Build and Boot to OS in Drawlat. Ensure that the system wakes up from suspend on AC connect and disconnect on both the TypeC ports. 276 | 2020-11-04 12:21:29 | S0ix Enter 277 | 2020-11-04 12:21:40 | S0ix Exit 278 | 2020-11-04 12:21:40 | EC Event | AC Disconnected 279 | 2020-11-04 12:21:57 | S0ix Enter 280 | 2020-11-04 12:22:03 | S0ix Exit 281 | 2020-11-04 12:22:03 | EC Event | AC Connected 282 | 2020-11-04 12:22:35 | S0ix Enter 283 | 2020-11-04 12:22:47 | S0ix Exit 284 | 2020-11-04 12:22:47 | EC Event | AC Disconnected 285 | 2020-11-04 12:23:08 | S0ix Enter 286 | 2020-11-04 12:23:16 | S0ix Exit 287 | 2020-11-04 12:23:16 | EC Event | AC Connected Change-Id: I7fa4ac0096548fd63af86e9f56c4c1ee25491399 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/dedede/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value for dedede variants (baseboard and drawcia). Currently, variants like boten, waddledee, waddledoo, metaknight and wheelie uses the DTT entries from baseboard devicetree since there is no override present for these variants. So, these variants will also reflect this change of PL1 minimum value. For madoo variant, PL2 minimum value already set the same as PL2 maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on drawcia system Change-Id: I7ecf1ffcc7871192ebe18eb8c3c3fd3e1193721e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47154 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/dedede/var/metaknight: Generate SPD ID for supported partsTim Chen
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory part being added is: MT53E512M32D2NP-046 WT:E K4U6E3S4AA-MGCR H9HCNNNBKMMLXR-NEE MT53E1G32D2NP-046 WT:A K4UBE3D4AA-MGCR BUG=b:169813211 TEST=Build the metaknight board. Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Change-Id: I0d0d22f4790f66b5265803e4dcf01234a16b1993 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30fw_config: Convert fw_config to a 64-bit fieldTim Wawrzynczak
We all knew this was coming, 32 bits is never enough. Doing this early so that it doesn't affect too much code yet. Take care of every usage of fw_config throughout the codebase so the conversion is all done at once. BUG=b:169668368 TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG and verify the console print contained that bit. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/dedede/var/magolor: Configure I2C high and low timeRen Kuo
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:168783630 TEST=Measured the I2C bus frequency reduce to 387 KHz. Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I9f5b81815f86db7bdcea95a95b9c9b235b4a34b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46613 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26Revert "mb/google/dedede: Add mainboard acpi support for GPIO PM configuration"Karthikeyan Ramasubramanian
This reverts commit 214c719eed83967b8f0564feca65eebb3d83f5bc. CB:45857 overrides the GPIO PM configuration if Cr50 does not support long interrupt pulse width. More recent Cr50 Firmware versions support long pulse width and hence the GPIO PM can take the default configuration. BUG=None TEST=Build and boot Drawlat to OS. Ensured that 200 iterations of suspend/resume sequence, warm and cold reboot cycles each are successful. Change-Id: I8e3be42cd82fd3ae919d23d6f19c84a90b9c737a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-23mb/google/dedede: Update the flash ROM layout for RW regionsKarthikeyan Ramasubramanian
RW_LEGACY region needs to be 1 MiB to accommodate any alternate firmware. Hence update the flash ROM layout as below: * Grab ~512 KiB from each FW_MAIN_A/B regions and allocate them to RW_LEGACY region so that it grows to 1 MiB. * Remove VBLOCK_DEV region which is not used. * Re-size the ELOG region to 4 KiB since that is the maximum size of the ELOG mirror buffer. * Resize RW_NVRAM, VBLOCK_A/B regions to 8 KiB since no more than that size is used in those regions. * Resize SHARED_DATA region to 4 KiB since no more than that size is used in that region. * Based on the resizing, allocate each FW_MAIN_A/B regions with 72 KiB. BUG=b:167943992, b:167498108 TEST=Build and boot to OS in Drawlat. Ensure that the firmware test setup and flash map test are successful. Ensure that the event logs are synced properly between reboots. Ensure that the suspend/resume sequence is working fine. Ensure that the ChromeOS firmware update completes successfully for the boot image with updated flash map and the system boots fine after the update. Change-Id: I53ada5ac3bd73bea50f4dd4dd352556f1eda7838 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46569 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/dedede/var/drawcia: Add MIPI camera supportWisley Chen
To support mipi WFC. 1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU 2. add IPU/VCM/NVM/CAM1 in devicetree BUG=b:163879470, b:171258890, b:170936728, b:167938257 TEST=Build and boot to OS. Capture frames using camera app. Change-Id: I96f2ef682dff851d7788c2b612765a92228ddf75 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44939 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-22dedede: Create metaknight variantTim Chen
Create the metaknight variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:169813211 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_METAKNIGHT Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Change-Id: Ia2e473eb1d0a2c819b874e497de0823fca75645a Reviewed-on: https://review.coreboot.org/c/coreboot/+/46568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-21mb/google/dedede: drop obsolete ISST workaroundMichael Niewöhner
Early JSL silicon hang while booting Linux with ISST enabled. The malfunctioning silicon revisions have been used only for development purposes and have been phased out. Thus, drop the ISST workaround. Change-Id: Ic335c0bf03a5b07130f79c24107a1b1b0ae75611 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-21mb/google/dedede/variants/drawcia: update PL1 max and min power valuesSumeet R Pawnikar
Update PL1 max and min power values BUG=None BRANCH=None TEST=build and verify on dralat system Change-Id: I75d47fa721576564f71fbd5d5fd2e820fc3f1925 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-20mb/google/dedede: Add P-sensor for Botenalec.wang
Add devicetree and device ID for P-sensor BUG=b:161217096 BRANCH=NONE TEST=We can get the data from P-sensor if touch the SAR antenna. Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: I70f303995b106cca9758b36ebcde112ebcc90950 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-20mb/google/dedede: add PEN for Botenalec.wang
Update devicetree of boten that enable stylus BUG=b:160752604 BRANCH=NONE TEST=build bios and verify function for boten Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: Ifbcac18fcf758f3d870a6af0d1b03e34369414c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-19mb/google/dedede/var/waddledee: Enable GPIO based I2C MultiplexerKarthikeyan Ramasubramanian
The camera sensor component chosen for UFC and WFC have an address conflict. Resolve it by enabling GPIO based I2C Multiplexer. Also configure the GPIO that is used as select line. BUG=b:169444894 TEST=Build and boot waddledee to OS. Ensure that the ACPI identifiers are added for I2C devices multiplexed using I2C MUX under the appropriate scope. Change-Id: I9b09e063b4377587019ade9e6e194f4aadcdd312 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-14mb/google/dedede/var/madoo: Update DPTF settingJohn Su
Add tcc, critical, passive policy, and pl values from thermal team. BUG=b:169215576 TEST=build and verify by thermal tool Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I4f61eaa7eab2b86b04ff0541886621afb3082b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-12mb/google/dedede: refactor DPTF section for simpler overridesSumeet R Pawnikar
Refactor DPTF section of code under the baseboard devicetree and overridetree. This makes override mechanism more simpler, because not all the DPTF fields need to be overridden. BUG=None BRANCH=None TEST=Built and tested on dedede system Change-Id: I8e7cfe60c010ed4c07f9089325b289519e861f84 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12mb/google/dedede: Enable SaGv supportAamir Bohra
Allow MRC training in SaGv low, mid and high frequencies. TEST=Verify memory trains at low, mid and high SaGv point through FSP debug logs enabled. Change-Id: I0f60aad031ce9dfe23e54426753311c35db46c05 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45196 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/dedede: update devicetree for Botenalec.wang
Add trackpad, touchscreen, and usb port to devicetree BUG=b:160664447 BRANCH=NONE TEST=build bios and verify theirs function for boten Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: I057f7d15d20d1a78acd733cc5463357e9c87afb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-09mb/google/dedede: Override GPIO PM configurationKarthikeyan Ramasubramanian
If Cr50 is running old firmware version and hence does not ensure long interrupt pulses, override the GPIO PM configuration. BUG=None TEST=Build and boot waddledee to OS. Ensure that any chip override happens before FSP silicon parameter initialization. Ensure that the suspend/resume sequence works fine. Ensure that the reboot sequence works fine for 50 iterations. Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-08mb/google/dedede/variants/drawcia: Update TSR1 passive trip temperatureSumeet R Pawnikar
Update TSR1 passive trip temperature BUG=b:169691800 BRANCH=None TEST=Built and tested on dedede system Change-Id: I172391daca981d5591fa9cc5eacad92521dd0dc5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-08mb/google/dedede: Configure VR in devicetreeMeera Ravindranath
BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3ea32218040263f0abef9b9dd4c52efb16289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45825 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05mb/google/hatch,dedede,volteer: enable CHROMEOS_DRAM_PART_NUMBER_IN_CBINick Vaccaro
Enable CHROMEOS_DRAM_PART_NUMBER_IN_CBI on hatch, dedede, and volteer to use the common version of mainboard_get_dram_part_num(). Remove duplicate instances of mainboard_get_dram_part_num(). BUG=b:169789558, b:168724473 TEST="emerge-volteer coreboot && emerge-hatch coreboot && emerge-dedede coreboot" and verify it builds. Change-Id: I4e29d3e7ef0f3370eab9a6996a5c4a21a636b40e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45883 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05mb, soc: change mainboard_get_dram_part_num() prototypeNick Vaccaro
Change mainboard_get_dram_part_num() to return a constant character pointer to a null-terminated C string and to take no input parameters. This also addresses the issue that different SOCs and motherboards were using different definitions for mainboard_get_dram_part_num by consolidating to a single definition. BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch coreboot" and verify build completes successfully. Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/google/dedede/var/magolor: apply DPTF settingRen Kuo
add tcc, critical, passive policy, and pl values from thermal team BUG=b:168353037 TEST=build and verify by thermal tool Change-Id: I887d494ff097a881d519a456f24578a278323051 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45453 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/dedede/var/magolor: Add ACPI camera supportRen Kuo
1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU 2. add IPU/VCM/NVM/CAM0 in devicetree BUG=b:166527568 TEST= build and verify function by cam ap on DUT Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Ica6aa8ddc03a1dab5b548a759825dd3a4de3101f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45329 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/dedede/var/madoo: Clean-up static camera ASL fileKarthikeyan Ramasubramanian
Camera ACPI tables are generated at run-time for all variants of Dedede. BUG=None TEST=Build madoo variant. Change-Id: Icb74c01a0a6dbc620466b64cd2b5652408ca41b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-28mb/google/dedede/var/drawcia: Enable EC keyboard backlightWisley Chen
BUG=b:168847046 TEST=emerge-dedede coreboot chromeos-bootimage Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I16ed22aa5e270ad2d5c964764cc134b72941d4e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-23treewide: rename GENERIC_SPD_BIN to HAVE_SPD_BIN_IN_CBFSMichael Niewöhner
The name GENERIC_SPD_BIN doesn't reflect anymore what that config is used for, so rename it to HAVE_SPD_BIN_IN_CBFS. Change-Id: I4004c48da205949e05101039abd4cf32666787df Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45147 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-22soc/intel/jasperlake: Enable processor thermal control using PCI_DEVFNSumeet R Pawnikar
Enable processor thermal control using PCI dev path function instead of Device4Enable parameter in devicetree. This change removes the dependency on Device4Enable in devicetree. We can enable and disable this thermal control using on and off support with PCI device entry in devicetree. BRANCH=None BUG=None TEST=Built and tested on dedede board Change-Id: I0463236996ad001af506c9966840b27fe44d60d2 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-22mb/google/dedede/variants/madoo: Adjust I2Cs CLK to meet specJohn Su
After adjustment on madoo Touch Pad CLK: 381.9 KHz Touch Screen CLK: 389.4 KHz Audio CLK: 380.9 KHz BUG=b:168565823 BRANCH=master TEST=USE=build madoo and measure by scope with madoo. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: If281f9a8614e3e0ef20893b456f46e68ecb0631d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-21mb/google/dedede/var/madoo: Add Wifi SAR for madooDtrain Hsu
Add wifi sar for madoo. Using tablet mode of fw config to decide to load custom wifi sar or not. BUG=b:165105210 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ic6128b966c952cdc02a6359c14fa41f22265039a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-16mb/google/dedede: Replace static Camera ACPI by driver for WDooPandya, Varshit B
This change updates devicetree to enable SSDT generation for world facing camera and user facing camera of Waddledoo. Also reverts DSDT changes related to both the camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Ib7e875d297c04f35d4e980ff33d9a3767d2910ac Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16mb/google/dedede/var/madoo: Enable keyboard backlight featureIan Feng
This enables the keyboard backlight feature in ACPI for madoo. BUG=b:167943993 TEST=Verified 'kbd_backlight' shows up in the '/sys/class/leds '. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I11531699cb650b96becae5c1bec9f89c48b6bea0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>