aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb
AgeCommit message (Collapse)Author
2020-11-13mb/google/dedede: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=emerge-dedede coreboot Change-Id: I9d8fa57ae0f554896a4a0722e3e89567676382d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-16mb/google/dedede: Replace static Camera ACPI by driver for WDooPandya, Varshit B
This change updates devicetree to enable SSDT generation for world facing camera and user facing camera of Waddledoo. Also reverts DSDT changes related to both the camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Ib7e875d297c04f35d4e980ff33d9a3767d2910ac Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-08-21mb/google/dedede: Enable IPU for Wdoo and Wdee variantsMaulik V Vaghela
IPU is required to be enabled for platform supporting MIPI camera. IPU is by default disabled in devicetree for all variants. Enable IPU for Waddledoo and Waddledee supporting MIPI camera. BUG=None BRANCH=None TEST=IPU is enabled for platforms and enumerates in lspci. Change-Id: Ia3cf06d78be4301c68bfa8b1118ddff231d24a66 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44271 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
Use tabs instead of eight (sometimes less) spaces. Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at the same time. Add a delay of 100 ms after disabling the stop GPIO. This will ensure the required delay is inserted for both reset and stop disable GPIOs simultaneously. BUG=b:152936541 TEST=Build and boot the waddledoo mainboard. Ensure that the SiS Touchscreen is functional. Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/dedede: Re-configure the USB ACPI objectsKarthikeyan Ramasubramanian
In waddledee and waddledoo, discrete & integrated BT signals are routed to different USB ports. In all the other variant boards, discrete & integrated BT signals are routed to the same USB port (port 8 - index 7). Re-configure the USB devices accordingly. Also device configuration in override tree are applied only if there is a matching device in base devicetree. So configure all the USB devices in base devicetree and turn them off. BUG=b:154064148 TEST=Ensure that the SSDT contains the ACPI objects for enabled USB devices. Change-Id: I1b8bf7f4db1d2661f310bf4874428a6d1de222c6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42554 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10mb/google/dedede/variants/waddledoo: Adjust I2Cs CLK to meet specJohn Su
After adjustment on waddledoo Touch Pad CLK: 392.9 KHz Touch Screen CLK: 387.4 KHz Audio CLK: 350.9 KHz BUG=b:151302522 BRANCH=master TEST=emerge-dedede coreboot chromeos-bootimage measure by scope with waddledoo. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Iec02a751f1effdbefbb2969db2fd57f27ecdd033 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42187 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/dedede/variants/waddledoo: Modify ELAN touchscreen slave addressIan Feng
Modify ELAN EKTH6918 USI touchscreen slave address to 0x10. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I999967b0f37c82ff7811e3b6117baab795a11195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-14mb/google/dedede: Enable ELAN touchscreen for WaddledooDtrain Hsu
Add ELAN EKTH6918 USI touchscreen support. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I030c7d7e76a9705be06fe907c4ac279e247cb163 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-14mb/google/dedede: Enable SIS touchscreen for WaddledooDtrain Hsu
Add SiS9813 USI touchscreen support. BUG=b:152936541 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id04c46c763fdf68418bf2e97be4c8bb6bb73c749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40250 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-01soc/intel/{tgl,jsl}: Use soc/intel/jasperlake for Jasper Lake SoCAamir Bohra
Switch to using Jasper Lake SoC code from soc/intel/jasperlake and stop referring from soc/intel/tigerlake. Addtionally mainboard changes are done to support build. BUG=b:150217037 TEST=Build and boot waddledoo. Build jasperlake_rvp and volteer board. Change-Id: I39f117bd66cb610a305bcdb8ea65332fd0ff4814 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-20mb/google/dedede Add Audio support for waddledooAamir Bohra
1. Configure Audio GPIOs. 2. Set i2c4 configuration. 3. Update PCH HDA configuration TEST=Verify codecs gets listed with aplay -l command. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Change-Id: Ic0516c7a8fee79ce17343a7f42895d6ef534fec9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-14mb/google/dedede: Configure WLANKarthikeyan Ramasubramanian
Turn on CNVi device. Turn on PCIe Root port that hosts WLAN device. Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN - both CNVi and M.2. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9bb8e57cdb688bc544929c94af380b9ef1d936a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-12mb/google/dedede: Enable trackpad supportPandya, Varshit B
1. Configure trackpad interrupt GPIO. 2. Set i2c0 configuration. 3. Add trackpad ACPI support. TEST= Verify trackpad working. Verify I2C SCL frequency below 400Khz on trackpad operation. Change-Id: I52c578aef591f5be90fb709bab4c8342ea9729e6 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-24mb/google/dedede: Add waddledoo variantKarthikeyan Ramasubramanian
Add initial support for waddledoo board. BUG=None TEST=Build the mainboard and variant board. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8ab4d52c97b1cfb5549d2fce4b931748a1b1ff1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-24 18:36:10 +0000