aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/dedede/variants/madoo
AgeCommit message (Collapse)Author
2021-01-07mb/google/dedede/var/madoo: Update Goodix touchscreen power sequenceDtrain Hsu
Follow Goodix datasheet (GT7375 Programming Guide_Rev.0.1.pdf and GT7375P Programming Guide_Rev.0.6.pdf) to tune touchscreen power sequence. Increase reset_delay_ms from 120ms to 180ms. BUG=b:176511605 BRANCH=dedede TEST=Build and boot Madoo to OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iae35e4da31a3c3afd24c7daf81a5a3e762acd3b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-12-21mb/google/dedede/var/madoo: Configure Acoustic noise mitigation UPDsDtrain Hsu
Enable Acoustic noise mitigation for madoo and set slew rate to 1/8 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:173765599 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I968d8d43016e3569835b0a777335fa1d5c135f87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-20mb/google/dedede/variants/madoo: Increase TCC offset from 5 to 10John Su
Increase TCC offset value from 5 to 10 for Thermal Control Circuit (TCC) activation. BUG=b:171531244 TEST=build and verify by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic2822b059f166779e1f0bcf92e753dad1078783c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47691 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/dedede: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=emerge-dedede coreboot Change-Id: I9d8fa57ae0f554896a4a0722e3e89567676382d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-14mb/google/dedede/var/madoo: Update DPTF settingJohn Su
Add tcc, critical, passive policy, and pl values from thermal team. BUG=b:169215576 TEST=build and verify by thermal tool Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I4f61eaa7eab2b86b04ff0541886621afb3082b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-28mb/google/dedede/var/madoo: Clean-up static camera ASL fileKarthikeyan Ramasubramanian
Camera ACPI tables are generated at run-time for all variants of Dedede. BUG=None TEST=Build madoo variant. Change-Id: Icb74c01a0a6dbc620466b64cd2b5652408ca41b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-22mb/google/dedede/variants/madoo: Adjust I2Cs CLK to meet specJohn Su
After adjustment on madoo Touch Pad CLK: 381.9 KHz Touch Screen CLK: 389.4 KHz Audio CLK: 380.9 KHz BUG=b:168565823 BRANCH=master TEST=USE=build madoo and measure by scope with madoo. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: If281f9a8614e3e0ef20893b456f46e68ecb0631d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-21mb/google/dedede/var/madoo: Add Wifi SAR for madooDtrain Hsu
Add wifi sar for madoo. Using tablet mode of fw config to decide to load custom wifi sar or not. BUG=b:165105210 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ic6128b966c952cdc02a6359c14fa41f22265039a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-16mb/google/dedede/var/madoo: Enable keyboard backlight featureIan Feng
This enables the keyboard backlight feature in ACPI for madoo. BUG=b:167943993 TEST=Verified 'kbd_backlight' shows up in the '/sys/class/leds '. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I11531699cb650b96becae5c1bec9f89c48b6bea0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex). BUG=b:160157545 TEST=run gen_part_id for volteer variants and verify that it changed spd names to prepend the "lp4x-" to the filename.. Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-03mb/google/dedede/var/madoo: Add discrete WiFi configurationDtrain Hsu
Add RTL8822CE support for Madoo. BUG=b:162390420 BRANCH=None TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage, build successful Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I6e471be2b2856977e6f728d5a2ca78942725bea6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-08-03mb/google/dedede/var/madoo: Support Elan touchpad and configure I2C portsDtrain Hsu
1. Add Elan touchpad support. 2. Follow schematic to disable I2C1 and I2C3. BUG=b:160869188,b:161407664 BRANCH=NONE TEST=emerge-dedede coreboot chromeos-bootimage", build successful Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I154a1ff2597968d200d1d0693718f90cd2744616 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-08-03mb/google/dedede/var/madoo: Enable Goodix touchscreenIan Feng
Add Goodix touchscreen support. BUG=b:160868197 BRANCH=None TEST=emerge-dedede coreboot chromeos-bootimage", build successful Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I9bf27d69d0895cb4ea8620a6da49e98d25e05c23 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44012 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28mb/google/dedede/var/madoo: Generate SPD ID for supported partsDtrain Hsu
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: H9HCNNNBKMMLXR-NEE MT53E512M32D2NP-046 WT:E K4U6E3S4AA-MGCR BUG=b:161215903 BRANCH=NONE TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib61af2399541c4caf4a310a34e778e0ba1cbd3ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/43802 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A)Dtrain Hsu
Select the drivers for ALC5682 codec and MX98360A spk amp BUG=b:161407664 BRANCH=NONE TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ibe3d878b1058bfae4143d96be854884e61394ad5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-28mb/google/dedede/var/madoo: Configure USB port setting for MadooDtrain Hsu
Follow schematic to modify USB port setting and clean up I2C clock tuning. USB2 [0]: USB Type C Port 0 USB2 [1]: USB Type C Port 1 USB2 [2]: None USB2 [3]: USB Type A Port 1 USB2 [4]: None USB2 [5]: Camera USB2 [6]: None USB2 [7]: WLAN module - BlueTooth USB3 [0]: USB Type C Port 0 (M/B side) USB3 [1]: USB Type C Port 1 (Sub/B side) USB3 [2]: None USB3 [3]: USB Type A Port 1 USB3 [4]: None USB3 [5]: None BUG=b:161407664 BRANCH=NONE TEST=Build the coreboot image on madoo board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ia73593f52adee3806e725127891f084a08bf1360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43750 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28mb/google/dedede/var/madoo: Configure GPIO for MadooDtrain Hsu
Follow schematic to modify some GPIO pins. GPP_D12 - NC Pin GPP_D13 - NC Pin GPP_D14 - NC Pin GPP_D15 - NC Pin GPP_E0 - NC Pin GPP_E2 - NC Pin GPP_H6 - NC Pin GPP_H7 - NC Pin GPP_S02 - NC Pin GPP_S03 - NC Pin BUG=b:161407664 BRANCH=NONE TEST=Build the coreboot image on madoo board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I85aadfb0d020055eec921c7646c16ae6c95a606f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43745 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21mb/google/dedede: Create madoo variantIan Feng
Create the madoo variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161191394 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MADOO Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 07:36:06 +0000