summaryrefslogtreecommitdiff
path: root/src/mainboard/google/cyan
AgeCommit message (Collapse)Author
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether or not the payload will actually be SeaBIOS: 1. PAYLOAD_SEABIOS, but payload changed with cbfstool 2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS et. cetera. Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11293 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the mainboards that use them. Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-20mainboard: Get CHROMEOS/MAINBOARD_HAS_CHROMEOS right (again)Alexandru Gagniuc
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig. That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I find this being used wrong. Why is this confusing/so hard to get right? Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11290 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-23cyan/strago: disable Ambient Light Sensor deviceJagadish Krishnamoorthy
No devices are connected to i2c4 bus on both strago and cyan board. Hence disabling the ALS platform data. This will fix the i2c4 timeout issue and also help in boot time optimization. Removed unused macros. BUG=None BRANCH=chrome-os-partner:41934 TEST=After booting to kernel, i2c4 timeout error message should not appear in dmesg. Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778 Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283608 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11005 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21google/cyan: Configure EC_IN_RW signal as gpio inputHannah Williams
BUG=chrome-os-partner:42881 BRANCH=None TEST=Using ctrl-d in recovery mode to switch to dev mode works. Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5 Original-Reviewed-on: https://chromium-review.googlesource.com/286612 Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11013 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21intel/cyan: Fix crossystem "wpsw_cur" statusHannah Williams
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community were in two ranges: 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error. The original offset was 0x16 whereas it should be 0x13 BUG=chrome-os-partner:42798 BRANCH=None TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286534 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11010 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Cyan: Tune charger current limit in performance states table.li feng
Charger performance states table defines charger current limit for each p state. Modify charger current control values for SANYO battery used in Cyan. BUG=None BRANCH=None TEST=System is charging battery, in shell window, issue command "echo 0 > /sys/class/thermal/cooling_device4/cur_state", "echo 1 > /sys/class/thermal/cooling_device4/cur_state", "echo 2 > /sys/class/thermal/cooling_device4/cur_state", "echo 3 > /sys/class/thermal/cooling_device4/cur_state", or "echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC console show different charging current value. Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09 Original-Signed-off-by: li feng <li1.feng@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285605 Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Reviewed-on: http://review.coreboot.org/11004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21cyan/strago: Disable wwanJagadish Krishnamoorthy
Disabling the wwan gpio line since wwan is not used. BRANCH=none BUG=none TEST=wwan should not connect to network on cyan/strago. Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285304 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21cyan: Enable EC software syncRavi Sarawadi
BUG=chrome-os-partner:40526 BRANCH=None TEST=Verify that system boots when used with coreboot and EC versions that also have Software Sync enabled. Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00 Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0 Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283573 Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/10985 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/google: Add Braswell based Cyan boardLee Leahy
Add initial files for the cyan board. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None Test=Build and run on cyan Change-Id: I935839be033c25e197e78fbee306104b4162a99a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10182 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 00:54:06 +0000