| Age | Commit message (Collapse) | Author |
|---|
|
Currently, there are 3 separate settings for DPTF which are not always
in sync:
- the enabled/disabled state of the devicetree PCI device
- the 'dptf_enable' register, which sets the ACPI device status via GNVS
- the 'DptfDisable' register, which sets the FSP UPD of the same name
To make things sane, drop the two chip registers, and set the GNVS
variable and FSP UPD based on the enabled/disabled status of the DPTF
PCI device in the mainboard's devicetree.
TEST=build/boot google/cyan (edgar). Verify that the PCI and ACPI
devices are present/enabled when DPTF is enabled in devicetree, and not
present/disabled when disabled in devicetree.
Change-Id: I8fc1b63eda0dc2e047d9cb1e11a02d41ab8b2ad7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
These devices are not present/used on CYAN boards.
Change-Id: I012b49562c2b932822823537032e2265901ddc81
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76799
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The parallel mp code picks up lapics at runtime, so remove it from all
devicetrees that use this codebase.
Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Introduce the `dptf_enable` devicetree setting to set the DPTE GNVS
field, as newer Intel platforms do.
Change-Id: I88b746c64ca57604f946eefb00a70487a2fb27c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove unreferenced settings and factor out common settings. Many of
these are not mainboard-specific, and all boards use the same value.
Change-Id: Iecae61994a068e8022638a2ad9ca10174427f0a4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enables ACPI backlight controls under Windows.
Test: boot Win 10 on cyan and edgar variants, verify
screen backlight controls available and functional.
Change-Id: I8976291b5bafaec934d0bfd91fcdab50b381beec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Braswell boards don't work well with the eMMC and SD controller
in ACPI in payloads other than depthcharge - SeaBIOS requires
an onerous workaround (manually determining the PCI BAR0 address
for each eMMC and SD controller, then adding adding etc/sdcard
entries to the CBFS), and Tianocore can't see the devices at all.
To make the common use-case work better, switch to PCI mode.
Test: build/boot cyan variants with SeaBIOS and Tianocore
payloads, verify eMMC and SD card visible and bootable to
both payloads and OSes.
Change-Id: I71947603e22a37fe2c8ef4eaac8a3aa0d0ed1cec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40002
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simply cyan variants by converting to overridetree format.
A few differences were ignored as there appears to be no
reason behind them:
- cyan had PCIe RP2 enabled, but nothing is attached to it
- kefka had the SPI 1 device disabled
- reks, relm, and ultima had HSUART 1 disabled
- edgar had I2C1 UPD disabled
Test: build/boot cyan and edgar variants, verify everything
still works
Change-Id: I9928cc59adcfda4661ddfdfa95f53a7820053b4a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39964
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setup cyan to be the baseboard for other Google Braswell
boards, to be added in subsequent commits:
- Keep code common to all Google Braswell boards in the baseboard,
and separate out the board-specific bits into the new cyan variant.
- Define the I2C ACPI devices such that they can be easily reused for
other variants.
- Switch the trackpad/touchscreen interrupts from edge to level,
for better performance/compatibility, as was done with all previous
Google boards.
- Add code to the baseboard to allow optional variant-specific
parameters to be used for both memory and silicon init.
- Remove superfluous includes, replace some hardcoded values with
variables, and correct typos/formatting errors.
Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit e49deb1.
Configuring UPD PcdCaMirrorEn. This is a board specific parameter.
CA mirror is the Command Address mirroring option that is board
specific.
Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75
Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium 2b51633.
Disable unused PCI devices. Update PCI DeviceID.
Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad
Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
CQ-DEPEND=CL:12742
Change-Id: Ifc95809e342d87f863dd60967f5b3a6ca5c0f7b3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13036
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The codec clock frequency was incorrectly set to 25MHz.
The only available frequency is 19.2MHz through external clock and PLL.
Original-Reviewed-on: https://chromium-review.googlesource.com/295768
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5
Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com>
Reviewed-on: https://review.coreboot.org/12732
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add initial files for the cyan board.
Matches chromium tree at 927026db
This board uses the Braswell FSP 1.1 image and does not build
without the FspUpdVpd.h file.
BRANCH=none
BUG=None
Test=Build and run on cyan
Change-Id: I935839be033c25e197e78fbee306104b4162a99a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10182
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
