summaryrefslogtreecommitdiff
path: root/src/mainboard/google/cyan/acpi
AgeCommit message (Collapse)Author
2018-08-19google/cyan: Fix ACPI resource scope for Melfas touchscreenMatt DeVillier
Fix scope of ResourceSource, which should match the scope of the device itself. Change-Id: I9d0ff0ecc2721ec55b1ed12dddb495cd55966daf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-02google/cyan: Mark GpioInt() resources as PullDefaultMatt DeVillier
Adapted from chromium commit 3750e09 [Strago: mark GpioInt() resources as PullDefault] coreboot considers GPIO resources first-class citizens and initializes all pads according to their intended use, with necessary pull settings applied. Therefore let's use PullDefault as pull qualifier in AML, letting the kernel know that it should not attempt to alter pull settings when using GPIOs. TEST=Built and booted on celes, cyan, and egdar; built for other cyan devices. Original-Change-Id: Iff58a324e73a7eeac9b38df05a095fcfe7acd31b Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/898259 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I0c69e77c58b8ceca71bc0c99e16d10c3e539f783 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27760 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02google/cyan: Switch Touchpad and Touchscreen interrupts to be level-triggeredMatt DeVillier
Adapted from chromium commit 126d352 [Strago: switch Touchpad and Touchscreen interrupts to be level-triggered] The Elan and other touch controllers found in this device work much more reliably if used with level-triggered interrupts rather than edge-triggered. TEST=Boot several cyan boards, verify that touchpad and touchscreen work. Original-Change-Id: I59d05d9dfa9c41e5472d756ef51f0817a503c889 Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/894689 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia4f8cf83351dae0d78995ce0b0ed902d1e4ac3e8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/cyan: do not hardcode virtual interrupt numbersMatt DeVillier
Adapted from chromium commit ee7a150 [Strago: do not hardcode virtual interrupt numbers] Instead of hardcoding virtual interrupt numbers that may change as the kernel changes, use GpioInt() resources to describe keyboard, touchpad, and touchscreen interrupt lines. TEST=Build and boot several cyan variant boards, verify keyboard, touchpad and touchscreen work with newer kernels (4.14+). Original-Change-Id: I98d5726f5b8094d639fb40dfca128364f63bb30b Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/894687 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Iecfb45be433249d274532eb746588483fedb3f52 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from all google mainboards and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works correctly on nautilus. Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-12soc/intel/braswell/acpi/dptf/thermal.asl: Make Thermal event optionalFrans Hendriks
Currently thermal event support can not be disabled at board level. Define and dependent code are placed in same file. Move define of HAVE_THERM_EVENT_HANDLER to mainboard file. Change-Id: Icb532e5bc7fd171ee2921f9a4b9b2150ba9f05c5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/27415 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09src/mainboard: Serialize methods with named objects insideMartin Roth
Change-Id: I90e1d8b9f8e37bec8fc2796637b4548ea17e076b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-15google/setzer: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/setzer (HP Chromebook 11 G5) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new setzer variant - Add new I2C touchscreen device and SPD files to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-strago-7287.B, commit 02dc8db: Banon: 2nd source DDR memory (Micro-MT52L256M32D1PF) Change-Id: Ibcebebeb469c4bd6139b8ce83a1ca5ca560c2252 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/celes: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/celes (Samsung Chromebook 3) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new celes variant - Add new trackpad I2C device to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-celes-7287.92.B, commit 9f0760a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Id52d3c523bae7745b3dc04da012ab65c1fb37887 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/terra: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/terra (Asus Chromebook C202SA/C300SA) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new terra variant - Add code to the baseboard to handle terra's unique thermal management - Add new shared SPD files to baseboard Sourced from Chromium branch firmware-terra-7287.154.B, commit 153f08a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Ib2682eda15a989f2ec20c78317561f5b6a97483a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/reks: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/reks (Lenovo Chromebook N22/N42) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new reks variant - Add new I2C touchscreen device and SPD files to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-reks-7287.133.B, commit 7d812d4: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Iac9e2b5661aa33e12927f4cb84ebaee36522a385 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/edgar: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/edgar (Acer Chromebook 14 CB3-431) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new edgar variant - Add common code to the baseboard which will apply to all variants other than cyan Sourced from Chromium branch firmware-edgar-7287.167.B, commit 2319742: Edgar: Add Micron MT52L256M32D1PF-107 SPD data Change-Id: I58548cbbc85828f37c0023e8aa9e09bdca612659 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-15google/cyan: convert to variant configurationMatt DeVillier
Setup cyan to be the baseboard for other Google Braswell boards, to be added in subsequent commits: - Keep code common to all Google Braswell boards in the baseboard, and separate out the board-specific bits into the new cyan variant. - Define the I2C ACPI devices such that they can be easily reused for other variants. - Switch the trackpad/touchscreen interrupts from edge to level, for better performance/compatibility, as was done with all previous Google boards. - Add code to the baseboard to allow optional variant-specific parameters to be used for both memory and silicon init. - Remove superfluous includes, replace some hardcoded values with variables, and correct typos/formatting errors. Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Remove support for pre-EVT boardMatt DeVillier
Cleaning up code to remove support for pre-EVT rev of cyan board. Analogous to what was done for intel/strago in commit 103f00d. Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Use GpioInt for Keyboard IRQJagadish Krishnamoorthy
Cherry-pick from Chromium commit a162348. Remove the hard coded IRQ number for the keyboard interrupt. IRQ number can change based upon the gpio bank index ordering. Hence pass the gpio bank and index number so that kernel calculates the IRQ number. Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Fix Touchscreen InterruptJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1138727. Elan touchscreen driver expects the first gpio resource in asl to be the reset line. The driver considers the gpio based irq line as reset gpio resource and changes the direction to output. This will cause irq registration to fail. Solution is to pass Interrupt resource for touchscreen irq instead of GpioInt. Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for intel/strago and google/cyan as to not break compilation. Change-Id: Iaf8211bd86d6261ee8c4d9c4262338f7fe19ef43 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
TPM ACPI entries are automatically generated, and the old static TPM ASL file is obsolete. Remove the reference to this obsolete static and empty ASL file. Delete src/drivers/pc80/tpm/acpi/tpm.asl. Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
Instead of defining a separate LID device for mainboards using chromeec, define EC_ENABLE_LID_SWITCH for these boards. Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-22Cyan: Update DPTF parameters for higher temperatureT.H.Lin
TEST=Run DPTF CQ-DEPEND=CL:12729 Original-Reviewed-on: https://chromium-review.googlesource.com/295478 Original-Tested-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifa58ad72105d377c00df577f0e16ff1148b70119 Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Reviewed-on: https://review.coreboot.org/12747 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-07-23cyan/strago: disable Ambient Light Sensor deviceJagadish Krishnamoorthy
No devices are connected to i2c4 bus on both strago and cyan board. Hence disabling the ALS platform data. This will fix the i2c4 timeout issue and also help in boot time optimization. Removed unused macros. BUG=None BRANCH=chrome-os-partner:41934 TEST=After booting to kernel, i2c4 timeout error message should not appear in dmesg. Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778 Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283608 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11005 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21intel/cyan: Fix crossystem "wpsw_cur" statusHannah Williams
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community were in two ranges: 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error. The original offset was 0x16 whereas it should be 0x13 BUG=chrome-os-partner:42798 BRANCH=None TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286534 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11010 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Cyan: Tune charger current limit in performance states table.li feng
Charger performance states table defines charger current limit for each p state. Modify charger current control values for SANYO battery used in Cyan. BUG=None BRANCH=None TEST=System is charging battery, in shell window, issue command "echo 0 > /sys/class/thermal/cooling_device4/cur_state", "echo 1 > /sys/class/thermal/cooling_device4/cur_state", "echo 2 > /sys/class/thermal/cooling_device4/cur_state", "echo 3 > /sys/class/thermal/cooling_device4/cur_state", or "echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC console show different charging current value. Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09 Original-Signed-off-by: li feng <li1.feng@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285605 Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Reviewed-on: http://review.coreboot.org/11004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/google: Add Braswell based Cyan boardLee Leahy
Add initial files for the cyan board. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None Test=Build and run on cyan Change-Id: I935839be033c25e197e78fbee306104b4162a99a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10182 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>