Age | Commit message (Expand) | Author |
2024-11-19 | tree: Remove unused <assert.h> | Elyes Haouas |
2024-09-23 | mb/google/corsola: Distinguish MT8186T's SKU ID from MT8186 | Yang Wu |
2024-07-01 | mb/google/corsola/var/wugtrio: Add LCE_LMFBX101117480 MIPI panel | Yang Wu |
2024-05-07 | mb/google/corsola: Add new board variant Squirtle | Yang Wu |
2024-05-06 | mb/google/corsola: Sort Kconfig board selection in alphabet order | Yidi Lin |
2024-05-03 | mb/google/corsola: Initialize USB port 0 | Wentao Qin |
2024-04-25 | mb/google/corsola/var/wugtrio: Add STA_ER88577 MIPI panel | Yang Wu |
2024-04-17 | mb/google/corsola: Add new board variant Veluza | Frank Wu |
2024-04-15 | mb/google/corsola: Add new board variant Skitty | Herbert Wu |
2024-04-11 | tree: Drop unused <edid.h> | Elyes Haouas |
2024-04-10 | mb/google/corsola/var/wugtrio: Correct the display orientation | Yang Wu |
2024-04-09 | tree: Drop unused <console/console.h> | Elyes Haouas |
2024-04-09 | mb/google/*: Drop unused header file console/console.h | Ruihai Zhou |
2024-04-03 | mb/google/corsola: Add new board variant Wugtrio | Yang Wu |
2024-04-03 | mb/google/corsola: Move MIPI panel selection to BOARD_SPECIFIC_OPTIONS section | Yang Wu |
2024-04-01 | mb/google/corsola: Add new board variant 'Kyogre' | Kei Hiroyoshi |
2024-02-26 | soc/mediatek: Add `MEDIATEK_DRAM_ADAPTIVE` config to support dram adaptive | Yidi Lin |
2024-02-18 | mb/getac to mb/intel: Add SPDX license headers to Kconfig files | Martin Roth |
2024-01-24 | mb/google/asurada to cyan: Rename Makefiles from .inc to .mk | Martin Roth |
2024-01-10 | mb/google/corsola: Use common mtk_display_init() | Yidi Lin |
2023-11-30 | mb/google/corsola: Use fw_config to differentiate audio amps | Yidi Lin |
2023-11-22 | google/*: Clean up Kconfg board selection for Google MTK boards | Julius Werner |
2023-11-17 | mb/google/corsola: Configure I2C and I2S interface for ALC5650 | wuyang5 |
2023-11-04 | mb/google/corsola: Enable FW_CONFIG and FW_CONFIG_SOURCE_CHROMEEC_CBI | Yu-Ping Wu |
2023-10-30 | mb/google/corsola: Add new board 'Chinchou' | wuyang5 |
2023-10-06 | mb/google/starmie: Add 3 ms delay to AW37503 Power IC panel timing | Cong Yang |
2023-10-02 | mb/google/corsola: Move common selects to BOARD_GOOGLE_CORSOLA_COMMON | Felix Singer |
2023-09-25 | mb/google/corsola: Move board-specific selects to board options | Felix Singer |
2023-09-25 | mb/google/corsola: Fine tune LCM ADC voltages | Ruihai Zhou |
2023-09-23 | mb/google/corsola: Move selects from Kconfig.name to Kconfig | Felix Singer |
2023-09-21 | mb/google/corsola: Move selects from Kconfig.name to Kconfig | Felix Singer |
2023-08-06 | mainboard: Add SPDX license headers to Makefiles | Martin Roth |
2023-07-10 | mb/google/corsola: Add support for AW37503 Power IC | Ruihai Zhou |
2023-07-10 | mb/google/corsola: Add new board 'ponyta' | cengjianeng |
2023-07-06 | drivers/tpm: Move tis_plat_irq_status to cr50 driver | Grzegorz Bernacki |
2023-06-06 | mb/google/corsola/var/starmie: Add K&D-ILI9882T panel support | Ruihai Zhou |
2023-06-01 | mb/google/corsola: Fix MIPI panel power on/off sequence | Ruihai Zhou |
2023-05-22 | mb/google/corsola: Disable backlight before turning on bridge | Ruihai Zhou |
2023-05-14 | mb/google/corsola: Add support for MIPI panel | Ruihai Zhou |
2023-05-09 | mb/google/corsola: Enable HIMAX83102_J02 and ILI9882T panel for Starmie | Ruihai Zhou |
2023-05-03 | Drop many cases of CONFIG_MAINBOARD_PART_NUMBER | Kyösti Mälkki |
2023-04-27 | mb/google/corsola: Report SKU and panel ID for unprovisioned devices | Ruihai Zhou |
2023-04-22 | mb/google/corsola: Rename common config from `STARMIE` to `STARYU` | Ruihai Zhou |
2023-04-14 | mb/google/corsola: Add detachable Starmie as variant | Ruihai Zhou |
2023-04-14 | mb/google/corsola: Add support for VIO18 in regulator.c | Cong Yang |
2023-02-08 | mb/google/corsola: Use function to get regulator IDs | Liju-Clr Chen |
2022-11-08 | vboot: Add VBOOT_CBFS_INTEGRATION support | Jakub Czapiga |
2022-11-02 | mb/google/corsola: Add new board 'voltorb' | Mars Chen |
2022-10-21 | mb/google/corsola: Initialize MT6315 for MT8186T | Sen Chu |
2022-10-18 | mb/google/corsola: Configure TPM IRQ as EDGE_FALLING | Yu-Ping Wu |
2022-09-07 | soc/mediatek: a common implementation to register BL31 reset | Hung-Te Lin |
2022-09-07 | mb/google/corsola: Fix ANX7625 power-on T4 sequence | Zanxi Chen |
2022-08-27 | mb/google/corsola: Add new board Magikarp | van_chen |
2022-08-21 | mg/google/corsola: Disable TI50_FIRMWARE_VERSION_NOT_SUPPORTED | Yu-Ping Wu |
2022-08-14 | mb/google/corsola: Distinguish anx7625 and ps8640 for steelix | Zanxi Chen |
2022-07-21 | mb/google: Replace some strings in regulator.c | Rex-BC Chen |
2022-07-21 | mg/google/corsola: Enable TI50_FIRMWARE_VERSION_NOT_SUPPORTED | Yu-Ping Wu |
2022-07-04 | treewide: Unify Google branding | Jon Murphy |
2022-06-30 | mb/google/corsola: Decide EC-is-trusted logic by board rev | Yu-Ping Wu |
2022-06-27 | mb/google/corsola: Add new board Tentacruel | Kane Chen |
2022-06-12 | mb/google/corsola: Fix PS8640 power-on T6 sequence | Ruihai Zhou |
2022-06-08 | mb/google/corsola: Correct EC-is-trusted logic | Yu-Ping Wu |
2022-06-08 | mb/google/corsola: Enable ps8640 for steelix | Zanxi Chen |
2022-06-01 | mb/google/corsola: Add new board 'steelix' | Zanxi Chen |
2022-05-24 | mainboard/google/corsola: Fix incorrect timestamps in the eventlog | Yidi Lin |
2022-05-12 | mb/google/corsola: Enable TPM_GOOGLE_TI50 | Yu-Ping Wu |
2022-04-27 | mb/google/corsola: Add RO_GSCVD area to FMAP | Yu-Ping Wu |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-03-21 | mb/google: Remove unused cpu device | Yu-Ping Wu |
2022-03-21 | mb/google/corsola: Revise power-on sequence of PS8640 | Rex-BC Chen |
2022-01-07 | mb/google/corsola: Enable the SD card reader | Rex-BC Chen |
2022-01-06 | mb/google/corsola: Configure audio | Rex-BC Chen |
2022-01-01 | mb/google/corsola: Initialize krabby display | Rex-BC Chen |
2022-01-01 | mb/google/corsola: Remove 'corsola' from Kconfig board names | Rex-BC Chen |
2022-01-01 | soc/mediatek/mt8186: Add support for regulator VRF12/VCN33 | Rex-BC Chen |
2021-12-29 | mb/google/corsola: Initialize kingler display | Rex-BC Chen |
2021-12-29 | mb/google/corsola: Add board common config for kingler and krabby | Rex-BC Chen |
2021-12-29 | mb/google/corsola: Fully calibrate DRAM | Ryan Chuang |
2021-12-15 | mb/google/corsola: move USB3 HUB reset funtion to bootblock | Rex-BC Chen |
2021-12-14 | mb/google/corsola: set up open-drain ChromeOS pins | Rex-BC Chen |
2021-12-09 | mb/google/corsola: Pass reset gpio parameter to BL31 | Rex-BC Chen |
2021-12-09 | mb/google/corsola: correct NOR flash configuration in GPIO set | Rex-BC Chen |
2021-12-09 | mb/google/corsola: get SKU ID | Rex-BC Chen |
2021-12-08 | mb/google/corsola: Configure TPM | Rex-BC Chen |
2021-12-08 | mb/google/corsola: implement get_ec_is_trusted | Rex-BC Chen |
2021-12-08 | mb/google/corsola: Enable Chrome EC | Rex-BC Chen |
2021-11-26 | mb/google/corsola: Add an option for SD card initialization | Rex-BC Chen |
2021-11-26 | mb/google/corsola: Get RAM code from ADC | Rex-BC Chen |
2021-11-26 | mb/google/corsola: Raise little CPU frequency | Rex-BC Chen |
2021-11-26 | mb/google/corsola: Add VPROC12/VSRAM_PROC12 to regulator interface | Rex-BC Chen |
2021-11-26 | mb/google/corsola: configure GPIOs | Rex-BC Chen |
2021-11-17 | soc/mediatek/mt8186: Add RTC and clkbuf drivers | Yuchen Huang |
2021-11-17 | mb/google/corsola: Initialize SPM | Rex-BC Chen |
2021-11-16 | soc/mediatek/mt8186: add early initialization for eMMC | Rex-BC Chen |
2021-11-16 | mb/google/corsola: Configure eMMC and SD Card | Wenbin Mei |
2021-11-16 | soc/mediatek/mt8186: Configure eMMC and SD Card | Wenbin Mei |
2021-11-15 | mb/google/corsola: Add VMCH and VMC for regulator interface | Rex-BC Chen |
2021-11-15 | soc/mediatek/mt8186: add USB support | Rex-BC Chen |
2021-11-15 | mb/google/corsola: Implement regulator interface | Rex-BC Chen |
2021-11-15 | mb/google/corsola: add configuration for kingler and krabby | Rex-BC Chen |