summaryrefslogtreecommitdiff
path: root/src/mainboard/google/chell/gpio.h
AgeCommit message (Collapse)Author
2016-06-09skylake: gpio: Add support for setting 1.8V tolerantDuncan Laurie
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses that are at 1.8V. This is currently done by passing in a value to FSP but it is needed earlier than FSP if the I2C bus is used in verstage. This does not remove the need for the FSP input parameter, that is still required so FSP doesn't disable what has been set in coreboot. The mainboards that are affected are updated in this commit. This was tested by exercising I2C transactions to the 1.8V codec while in verstage on the google/chell mainboard. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c Reviewed-on: https://review.coreboot.org/15103 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29google/chell: Update GPIOs for DVT2Duncan Laurie
Add new GPIOs for touchscreen enable and reset pins and define the one missing unconnected pin for GPP_E10. BUG=chrome-os-partner:50518 BRANCH=glados TEST=build and boot on chell DVT1 Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329297 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13841 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/google/chell: provide configuration for all padsAaron Durbin
Instead of relying on power-on-reset values provide configuration for all pads. PAD_CFG_NC() was used for all pads which had no nets routed on the board. PAD_CFG_GPO(0) was used for pads which had nets routed on the board in order to terminate them. BUG=chrome-os-partner:50301 BRANCH=glados TEST=Built and booted chell. Suspended and resumed on EVT. Change-Id: I7960442d5c06f58a1b671cdefac71ef0bc3b0cd5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 6a167cd0a747402bfc3cc9b6fbaaceceda766ee9 Original-Change-Id: I519011b049235dc2a960939c0bed274252dbffa8 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/327835 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13831 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18google/chell: Minor updates from EVT and FSP 1.8.0Duncan Laurie
- Add pullup on LPC address lines for leakage - Configure PCH_WP early so it gets set properly in VBNV - Disable SD card reader in favor of USB BUG=chrome-os-partner:47346 BRANCH=none TEST=build and boot on chell EVT Change-Id: Ibac79c6cbef0515b1e8a513cfde5fee184e4c70a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ebd0c16a6009b74d3c6c36878c502fda9bb3020d Original-Change-Id: If2bc4eb546a1aab50d3688b6e92f8c38214c9cca Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/317241 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12979 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-03google/chell: Update mainboard for EVTDuncan Laurie
- Disable kepler device, it is removed and was not used on proto anyway. - Enable GPP_D22 as GPO to control I2S2 buffer for bit-bang PDM. - Disable HS400, this is breaking some devices on proto boards and is being disabled to reduce risk for EVT build. - Change Type-C USB2 port drive strength. BUG=chrome-os-partner:47346 BRANCH=none TEST=build and boot on chell proto Change-Id: Icf31f08302c89b2e66735f7036df914c0a0b9e8c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d00abc12efa69a99e6b0272228f52fb29e6b9180 Original-Change-Id: I63bda0b06c7523df9af9aed9b82280133b01d010 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313825 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-18google/chell: Set USB current limit to 2ADuncan Laurie
The GPIO for USBA_1_ILIM_SEL_L should be low to enable 2A charging from the Type-A port. BUG=chrome-os-partner:47172 BRANCH=none TEST=emerge-glados coreboot Change-Id: I1bbcdd467684e7c1372c8ca862d498fb6cbb966c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c8a8fbed6d0fd7aea0a41db2bde104fe7a05cabe Original-Change-Id: I3b18cbb204cfa19e50f34ea9533018e286342513 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/312451 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12447 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-18google/chell: disable power rails in sleep pathAaron Durbin
For the rails controllable by the host processor through gpios turn them off in the sleep paths. The result is that S3 and S5 will turn off those rails. BUG=chrome-os-partner:47228 BRANCH=None TEST=Built for chell. Change-Id: I5843f13be43a6ec143600585a5a0c47563e533dd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ddd5860dc0cfee68ec2f77f4931665740bede08c Original-Change-Id: Ife0e2fb11373dd129e20b914b45cd5b56c3493f7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/312321 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12446 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27google/chell: Add new mainboard for chellDuncan Laurie
This is based on glados with minor changes: - updated GPIOs based on schematic - add _PRW for trackpad wake now that it is on a new GPIO - add SPD for new memory config - disable ALS BUG=chrome-os-partner:46289 BRANCH=none TEST=emerge-chell coreboot Change-Id: Id5746bf2b5b26000fcc3f029b901bfe29b788dac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c5ebe98cf599ba80aac5e9ef238b7996789a819 Original-Change-Id: I75efda64a50b0e6e4a5c9008ce05d76c1e605b0c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/304927 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27google/chell: copy glados to chellDuncan Laurie
Only change is renaming all occurrences of glados to chell, keeping capitalization. Change-Id: I8b1a3efd03d415f27c8872827f8687babbc539f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12150 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>