summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya
AgeCommit message (Expand)Author
2022-04-07mb/google/brya/var/nereid: Add WLAN power sequenceReka Norman
2022-04-07mb/google/brya/var/nereid: Enable pen garageReka Norman
2022-04-07mb/google/brya/var/nereid: Configure descriptor for either Type-C or HDMIReka Norman
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
2022-04-06mb/google/brya: Enable dynamic debug capability for brya familySridhar Siricilla
2022-04-04mb/google/brya/var/vell: Tune I2C1/I2C7 bus speed for 1 MHzEddy Lu
2022-04-01mb/google/brya/var/nereid: Add separate VBT for HDMIReka Norman
2022-04-01mb/google/brya/var/nereid: Disable C1 PMC mux conn for HDMIReka Norman
2022-04-01mb/google/brya/variants/baseboard/brask: Turn off NFC power in S0ixAlan Huang
2022-04-01mb/google/brya/var/primus{4es}: Decrease touchscreen T3 timing to 200msCasper Chang
2022-04-01mb/google/brya/var/nereid: Enable AUX DC biasing on C0 and C1Reka Norman
2022-03-31mb/google/brya/var/agah: Replace amp max98390 with max98360Tony Huang
2022-03-31mb/google/brya/var/agah: Add GL9750 SD card reader supportTony Huang
2022-03-31mb/google/brya/var/kinox: set GPP_D0 to NCDtrain Hsu
2022-03-30mb/google/brya/var/kano: Remove SAR sensorDavid Wu
2022-03-30mb/google/brya/variants/crota: Add memory config for crotaTerry Chen
2022-03-30Revert "mb/google/brya/var/kano: adjust I2C3 speed"David Wu
2022-03-30mb/google/brya/variants/crota: init overridetree for crotaTerry Chen
2022-03-30mb/google/brya/var/banshee: Update the GPP_D12 as USB_C3_LSX_RXFrank Wu
2022-03-30mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL for tarloJoey Peng
2022-03-30mb/google/nissa/var/nivviks: Move WWAN power on sequence forwardEric Lai
2022-03-30mb/google/brask/variants/moli: update GPIOs for moliRaihow Shi
2022-03-30mb/google/brya/var/agah: Fix GPU GPIOsTim Wawrzynczak
2022-03-29mb/google/brya/var/felwinter: Update GPP_E19 from NF to NCJohn Su
2022-03-27mb/google/brya/var/banshee: Add mic mute switch settingFrank Wu
2022-03-27mb/google/brya/variants/baseboard/brask: set GPP_D0 to GPOZhuohao Lee
2022-03-27mb/google/brya/var/brya0: Replace amp max98357 with max98360Amanda Huang
2022-03-25mb/google/brya: Adjust FMD file to chromeos.fmd for kanoDavid Wu
2022-03-25drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15Eric Lai
2022-03-24mb/google/brya/var/gimble: Include 4 new SPDsMark Hsieh
2022-03-23mb/google/brya/var/taniks: Increase TSR2 threshold from 40 °C to 70 °CJoey Peng
2022-03-23mb/google/brya/var/primus{4es}: add delay time to rtd3-coldTerry Chen
2022-03-22mb/google/brya/var/moli: Fix overridetreeTim Wawrzynczak
2022-03-22mb/google/brask/variants/moli: init overridetree for moliRaihow Shi
2022-03-22mb/google/brya/variants/crota: set up gpioTerry Chen
2022-03-22mb/google/brya/var/kinox: Modify DDR4 to non-interleavedDtrain Hsu
2022-03-22mb/google/brya/var/taeko: Disable GL9763e PCIE port L0sKevin Chang
2022-03-22mb/google/brya/var/taeko: Enable Genesys L1 max entry delayKevin Chang
2022-03-21mb/google/brya/var/banshee: Add WiFi SAR tableFrank Wu
2022-03-21mb/google/brya/vell: Move WWAN devices for vellRobert Chen
2022-03-21mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTORSridhar Siricilla
2022-03-18mb/google/brya/nivviks/overridetree: update tcss_aux_ori register nameFelix Held
2022-03-18mb/google/nissa/var/nivviks: Add TcssAuxori for nivviksUsha P
2022-03-18mb/google/brya/var/banshee: Replace amp max98357 with max98360Frank Wu
2022-03-18mb/google/brya/var/volmar: Disable thunderboltRen Kuo
2022-03-18mb/google/brya/var/kinox: Reconfigure GPIO settingsDtrain Hsu
2022-03-18mb/google/brya/var/vell: Change AMP driver settingShon Wang
2022-03-17mb/google/brya: Remove mainboard.aslEric Lai
2022-03-17mb/google/brya: Remove Pcie Generic driver for WWANCliff Huang
2022-03-17mb/google/brya/var/banshee: Update DPTF parametersFrank Wu
2022-03-17mb/google/brya/var/kinox: Modify 15W SOC power control settingDtrain Hsu
2022-03-17mb/google/brask/variants/moli: set eMMC pin in bootblockRaihow Shi
2022-03-17mb/google/nissa/var/nivviks: Set gpio override to board_0Eric Lai
2022-03-16mb/google/brya/var/kinox: Enable PCIe-eMMC bridgeDtrain Hsu
2022-03-16mb/google/brya/var/kinox: Modify the DPTF/Fan parametersDtrain Hsu
2022-03-16mb/google/brya: set GPP_D0 to GPOMark Hsieh
2022-03-15mb/google/brya/var/banshee: Add camera privacy settingFrank Wu
2022-03-15mb/google/brya: Disable C1-state auto demotion for Brya & BraskMAULIK V VAGHELA
2022-03-15soc/intel/adl/chip.h: Convert all camel case variables to snake caseMAULIK V VAGHELA
2022-03-15{mb, soc}: Move mrc_cache invalidating logic into `memory` common codeSubrata Banik
2022-03-15{mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototypeSubrata Banik
2022-03-14mb/google/brya/var/primus{4es}: add eMMC enable pin in ramstageCasper Chang
2022-03-14mb/google/brya/var/kinox: update overridetreeDtrain Hsu
2022-03-14mb/google/brya: Set EPP to 45% for all Brya variantsCliff Huang
2022-03-14mb/google/nissa/var/nivviks: Hook up SD host controller GL9750Eric Lai
2022-03-14mb/google/nissa/var/nivviks: Enable pen garageEric Lai
2022-03-10mb/google/brask/variants/moli: Change DDR4 Interleave to Non-Interleavezoey wu
2022-03-10mb/google/brask/variants/moli: Reduce PSysMax to 11 ARaihow Shi
2022-03-09drivers/wifi,soc/intel/adl: Move CnviDdrRfim property to driversTim Wawrzynczak
2022-03-09mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUsDavid Wu
2022-03-09mb/google/brya/variants/felwinter: Fix stylus UI behavior bugJohn Su
2022-03-09mb/google/brya/var/redrix{4es}: Config VR_DOMAIN_GT's slew rate to 1/8Wisley Chen
2022-03-09mb/google/bry/anahera{4es}: Disable TCSS port1Wisley Chen
2022-03-09mb/google/brya/var/anahera{4es}: Configure Acoustic noise mitigationWisley Chen
2022-03-09mb/google/nissa: Add fmd file for nissaKrishna Prasad Bhat
2022-03-09mb/google/nissa: Select SOC_INTEL_CSE_LITE_COMPRESS_ME_RW KconfigKrishna Prasad Bhat
2022-03-08mb/google/brask/variants/moli: set up gpioRaihow Shi
2022-03-08mb/google/brya/var/nivviks: Change bluetooth USB2 port from 8 to 10Reka Norman
2022-03-08mb/google/brya/var/primus{4es}: add enable pin to rtd3-coldCasper Chang
2022-03-07mb/google/brya: Enable GPIO PM dynamically based on cr50 FW versionTim Wawrzynczak
2022-03-07mb/google/brya/var/taniks: Add GL9750 SD card reader supportJoey Peng
2022-03-07mb/google/brya/var/redrix{4es}: Disable TCSS PCIe port1Wisley Chen
2022-03-07mb/google/brya/vell: Enable USB2 port for KBD MCUDaisuke Nojiri
2022-03-07mb/google/brya/var/{brya*,redrix*}: Add DmaProperty for WWANTim Wawrzynczak
2022-03-07mb/google/brya/var/redrix{4es}: Re-enable USB2 port for BluetoothWisley Chen
2022-03-07mb/google/brya: Move ACPI MPTS method from DSDT to SSDT for Brya and RedrixCliff Huang
2022-03-07src: Make PCI ID define names shorterFelix Singer
2022-03-04Revert "mb/google/brya/var/taeko: Fix PLD group order (W/A)"Kevin Chang
2022-03-03mb/google/brya/var/nivviks: Configure WCAM DMIC data pinReka Norman
2022-03-03mb/google/brya: Change "mainboard: EC init" loglevel prefixIan Feng
2022-03-03mb/google/brya/var/vell: Change to ELAN touchpanel driverShon Wang
2022-03-02mb/google/brya/var/kinox: update gpio settingsDtrain Hsu
2022-03-02mb/google/brya: enable the SPD_CACHE_ENABLEZhuohao Lee
2022-03-02mb/google/brya/variants: add the smbus addr for dimm1Zhuohao Lee
2022-03-02mb, soc: Add the SPD_CACHE_ENABLEZhuohao Lee
2022-03-02mb/google/brya/var/vell: Remove Rcomp settingsGaggery Tsai
2022-03-02mb/google/brya/var/primus{4es}: modify GPP_B3 as unlockedCasper Chang
2022-02-28mb/google/brya/var/kano: add enable_off_delay_ms to 30David Wu
2022-02-28mb/google/brya/var/kano: Add wifi sar tableDavid Wu
2022-02-25mb/google/brask: Update PCH power cycle related durationsZhuohao Lee
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 21:48:08 +0000