| Age | Commit message (Collapse) | Author |
|---|
|
This patch configures the GPIO pins to enable ISH on the Trulo device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/trulo.
Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch configures the GPIO pins to enable ISH on the Orisa device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/orisa.
Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Define ISH main firmware name so ISH shim loader can load firmware
from file system.
BUG=b:354607924
TEST=Boot trulo board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc
Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch introduces the following changes,
- Remove TCSS XHCI (USB 3.x) devicetree settings
- Update Over Current (OC) & USB 2.0 config
- Update TCSS-XHCI capabilities
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the PMC MUX related setting from devicetree as Nova
doesn't include a MUX for it's USB-C port.
BUG=b:348332200
TEST=Able to build google/nova
Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Create the teliks variant of the nissa reference board by copying
the anraggar files to a new directory named for the variant.
BUG=b:352263941
BRANCH=None
TEST=1. util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELIKS
2. Run part_id_gen tool without any errors
Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops fw_config probing for ISH because ISH IP should
remains on by default for all Trulo variants.
Additionally, removed the redundant ISH entries from variant
override devicetree.
BUG=b:354607924
TEST=Able to verify ISH PCI Device is available while booting eMMC sku.
```
lspci
00:00.0 Host bridge: Intel Corporation Device 461c
...
00:12.0 Serial controller: Intel Corporation Device 54fc
...
00:1a.0 SD Host controller: Intel Corporation Device 54c4
```
Also, able to enter S0ix with this patch.
```
> suspend_stress_test -c 1 --ignore_s0ix_substates
At AP console:
s0ix errors: 0
s0ix substate errors: 0
s0ix pc10 errors: 0
At EC console:
power state 5 = S0ix, in 0x38d87
```
Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce PchPmSlpAMinAssert (pch_slp_a_min_assertion_width) to minimum
time (98ms) from 2sec.
BUG=b:349595391
BRANCH=firmware-brya-14505.B
Test=Verified on xol
Change-Id: Ia4b7b7ab5dc9afeb3505dfd2b42d0d397aed7a5c
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83683
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Streamline variant-level overrides by removing redundant entries that
already exist in either the SoC-level or the platform-level configurations.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I0b28354dfb865900a78a9d0738e00aa952eade0e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change adds a new USB2 Bluetooth device configuration on Port 10
for the Trulo variant.
* A new `drivers/usb/acpi` chip is added with:
* `desc` set to "USB2 Bluetooth"
* `type` set to "UPC_TYPE_INTERNAL"
* `reset_gpio` set to "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
* `device` referencing `usb2_port10`
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9a92a4d008eb4d0c339079ecbbb77facece435ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Orisa variant.
It also cleans up a redundant newline before the `serial_io_i2c_mode`
definition.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Icf1ff442530ad2263ad0b58829e5c7b2ce544439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83664
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This patch moves the configuration for integrated Bluetooth
functionality (USB2 Port 9) from Orisa variant to the Trulo baseboard.
This change is necessary to support the CNVi BT module on Trulo
variants. The configuration is skipped for Orisa.
Trulo: USB2 Port 9 is now configured as USB2_PORT_MID(OC_SKIP) to
support the CNVi BT module.
Orisa: The previous configuration of USB2 Port 9 as a Bluetooth port for
CNVi WLAN has been removed.
This change ensures proper Bluetooth connectivity is applicable for all
Trulo variants including Orisa and Trulo.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I760a82cb6f6c98db7249caf1ba7e6d6c5dc8f2c4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83663
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices.
2. Update fw_config probe to enable/disable devices in devicetree.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: Id3a22aa2206e86fdca6f6fadbc849572890fee58
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83657
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures GPIO pins as required for booting the Trulo
device from ramstage.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7b540416083a923ba4d2e52aa8edafb4bfb9ac0e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Xol has a shutdown issue on our reliability test environment:
- High temperature
- No battery condition
It needs to have margin for the PL2 and PL4 values from the adapter
power, this will limit the PL2/PL4 values up to 30W/40W for xol's
45W power adapter. The new values are confirmed by our power team.
BUG=b:353395811
BRANCH=brya
TEST=built and verified MSR PL2/PL4 values.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:18000000 <= MSR PL1 (18W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
[When connected 60W adapter without battery]
Before:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:60000000
After:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:30000000
constraint_2_power_limit_uw:40000000
[When connected 45W adapter without battery]
Before:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:45000000
constraint_2_power_limit_uw:45000000
After:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:30000000
constraint_2_power_limit_uw:40000000
Change-Id: Ic19119042ffdcc15c72764d8c27bcdce9f229438
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
If user continues to use the touchpad for over 3 minutes on Xol, the
pointer movement is stuttering.
Touchpad I2C transaction should appear during the interrupt signal level
is low, but we could see some more I2C transaction after the interrupt
signal(GPP_F14) went to high.
We found experimentally that changing the interrupt type to GPIO_INT
from APIC_IRQ improved this issue. We are still investigating, would
like to apply this change first for Xol's dogfooding.
BUG=b:350609957
BRANCH=brya
TEST=built and verified there's no stuttering issue on touchpad movement
Change-Id: Ie1b59355a694e5a42367a20e03f6c5f93225e79c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
This change adds early and romstage GPIO configurations for the trulo
variant, including:
Early GPIOs:
- GSC (Google Security Controller)
- WP (Write Protect)
- UART0 (for serial debug)
Romstage GPIOs:
- Touch Screen early power sequencing
CrOS GPIOs:
- CROS_GPIO_VIRTUAL
- GPIO_PCH_WP
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ic1b84f61ef62ddbadc2a45758fb3fce90fce0e88
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83568
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds FW Config to the device tree for choosing between the
discrete PD chip.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I0a8fb0225edecb063dede31efaec6f2502476977
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds power related entries (FIVR and policy to control
lower power c-state transitioning) to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ib125c91be79a81f3103dcd587dc685134a292e03
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch adds Thermal related entries (like, TDP, TCC and enabling
DPTF config with required sensor configuration) to the devicetree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I32f9219c0ba6b70f847f0752bff8aa2e4fdd0979
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83565
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Brya/brask devices using NAU88L25 are not recognizing headset buttons
correctly. The reason is we are using wrong reference voltage of
MICBIAS. Use VDDA instead.
BUG=b:352215240
TEST=test with 3.5mm headset with buttons on volume up/down and pause
Change-Id: I0619021c6fd0a196c318aee58e07dc4149f1d64e
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Reorder GPIO pin mapping as per platform documentation:
* GPIO_MEM_CONFIG_0 -> GPP_E2
* GPIO_MEM_CONFIG_1 -> GPP_E1
* GPIO_MEM_CONFIG_2 -> GPP_E12
* GPIO_MEM_CONFIG_3 -> NC
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I4e979686833095a904b114500dc1142def583afa
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83549
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds descriptions for Audio device (Speaker, Jack and Mic)
to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ied531dde856fb7c9a410b5667843c9be759cfc8f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for eMMC device (supported mode and DLL
tuning) to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I8f1310313b8114731aa417610f245f94c8978ac0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree, to
avoid suspend(s0ix) fail issue.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ifdaa0bf35413981327097c260ab47e757f697e37
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for CNVi WiFi and BT device to the device
tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7396917ca7875dcbe1d35a371cc450a9e070b18d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for Low Speed I/O (I2Cx, GSPIx, UARTx)
to the device tree.
It also includes entries that will generate ACPI code at runtime
with LSIO end-point device.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I94a3a7f6f85d84407f32ab4c879b236a80859f2d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83550
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds descriptions for TCSS port, including over-current
(OC) pin configuration, to the device tree.
It also includes entries that will generate ACPI code at runtime
with port definitions, locations, and type information.
Additionally, implement the TCSS PMC MUX programming.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I60de314a92514d153ca039f6eaeb904b117b786c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83548
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds descriptions for USB2/3 ports, including over-current
(OC) pin configuration, to the device tree.
It also includes entries that will generate ACPI code at runtime with
port definitions, locations, and type information.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I873810e401c4afdc162036f01bae7247f9b8c749
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds minimal device entries and chip configs for Trulo
overridetree.cb to boot.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ic8b90dbaaabb439c347a891650d255948d48810a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83546
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the EC configuration from the orisa variant to the
trulo baseboard, enabling reuse by other variants in the future.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Ib5611cf67a41950c1c4ce936a5d2bea7fdca5c68
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83544
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the GPIO configuration from the orisa variant to the
trulo baseboard, enabling reuse by other variants in the future.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: If41c1b567a0ed6397bc935183c832a423f43e8b9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83545
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables SKIP_RAM_ID_STRAPS for the TRULO board variant as
this board design won't stuff MEM strap GPIO hence, sets the static
SPD ID to 0 for the MT62F512M32D2DR-031 DRAM part.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I1acb4680a143611c55f4fa6e032fde38c62af054
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds key DRAM configuration parameters as below:
- Rcomp
- DQ byte map
- DQS CPU<>DRAM map
- ECT
- CCC Mapping
- SPD Index
Source: Trulo Schematics Rev0.5 (dated June'24)
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: Ie7abc393a71becf26d53ae9e4fc56f66c7117051
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch adds Micron Technology LPDDR5 DRAM
(part: MT62F512M32D2DR-031) for Trulo.
Make use of spd_tools to generate SPD file after following the below
steps:
1. make -C util/spd_tools
2. ./util/spd_tools/bin/part_id_gen ADL lp5
src/mainboard/google/brya/variants/trulo/memory
src/mainboard/google/brya/variants/trulo/memory/mem_parts_used.txt
Output files are:
1. dram_id.generated.txt
2. Makefile.mk
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: Id35f6b57b716375abb66db187413f0f82361d962
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83539
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set "option WIFI_SAR_ID_1 1" for WIFI_SAR_ID field in fw_config.
BUG=b:347108861
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I179dad5eeabc1d84aa0a2de5359be5848a2ecc39
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds hda_verb.c to the ramstage build, but only when the
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB config option is enabled.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I9b17126ff1493b5714d6ae715ad2863bdff4ed46
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83499
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixes a pmc_mux port mapping error introduced in coreboot
commit 4fa8354
Mithrax and felwinter do not have sequential mux_conn[X] to connY
mappings which led to the kernel subsystem linking between Type C
connectors and USB muxes to be incorrect. The previous patch
attempted to fix this by changing the custom_pld layout. However
this broke USB usage except for charging.
This patch reverts the custom_pld layout and instead changes the pmc
hidden and tcss_xhci port mappings to match the hardware layout.
BUG=b:352512335 b:329657774 b:121287022 b:321051330 b:204230406
TEST=emerge-${BOARD} coreboot
TEST=Manually check that usb-role-switches are mapped to the correct
port.
Attach USB 3 A to C cable from development machine to left port of
DUT.
Attach nothing to right-hand port.
ectool commands below are only for felwinter as a workaround for
devices without a firmware patch to connect superspeed lines.
ectool usbpd 0 none
ectool usbpd 0 usb
ectool usbpd 1 none
ectool usbpd 1 usb
echo host > /sys/class/typec/port0/usb-role-switch/role (should
succeed)
ls -l /sys/class/typec/port0/usb-role-switch (note CONX-role-switch)
echo host > /sys/class/usb_role/CONX-role-switch/role (should succeed)
echo host > /sys/class/typec/port1/usb-role-switch/role (should fail
as no cable attached)
ls -l /sys/class/typec/port1/usb-role-switch (note CONY-role-switch)
echo host > /sys/class/usb_role/CONY-role-switch/role (should fail
as no cable attached)
BRANCH=firmware-brya-14505.B
Change-Id: Iebd259842d3affa259069cd776b46759c1c60712
Signed-off-by: Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83472
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Several brya variants were missing VBT files, add and select them in
Kconfig.
Also select in Kconfig for VELL, which already had a VBT but was not
using/selecting it.
TEST=build/boot google/brya (marasov), verify display init functional
/ payload screen shown.
Change-Id: I6848c2b78cf37157299d94bf12c0b6d925ea1432
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83434
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fan control is assign to EC handle now. Remove relate setting on coreboot.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Iff0776ce3db6f27e250162357abb3c7e9b1a0dc3
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83380
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree
instead of variant.c, it can avoid suspend(s0ix) fail issue.
BUG=b:328580882
TEST=On riven eMMC and UFS SKUs, boot to OS and run
`suspend_stress_test -c 10` pass.
Change-Id: I518f1a5955fb88f304663112f1e3d4c744bde183
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83405
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia does not support Thunderbolt anymore,
therefore disable related TBT setting.
The bujia fit image CL, cf. chrome-internal:7468938.
BUG=b:349923139
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
Change-Id: I4301a1f744aa9d4de9f0eba4147c49a4bb3ed922
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83402
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia has 4 thermal sensors, so add two missing sensors settings.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
check ACPI SSDT table have new TSR info.
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
check SSDT.dsl
Change-Id: Id9a17a22a717faac829e6b5e300351187a62dd43
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add a new fw config field to determine which firmware edition shall be
flashed to the PDC.
BUG=b:334793686
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I817e9415aca1d2f68b484d8e23b581e1a75d6f84
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83353
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CNVi based Wifi6 is disabled, CNVi based Bluetooth must be turned
off, based on fw_config. Otherwise, when device boots without the cbi
settings for wifi6, boot may fail with assertion error for line 817 &
819 of file 'src/soc/intel/alderlake/fsp_params.c'.
BUG=b:345596420
BRANCH=NONE
TEST=Dut boots fine with both Wifi6 & Wifi7 based cbi settings, along
with enumeration of corresponding BT device.
Change-Id: I03fde02fa4b36f4e47d6f0e95675feddb3bee7cd
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
PCIe based GPIOs of Wifi7 module are enabled based on firmware config.
BUG=b:345596420
BRANCH=NONE
TEST= Based on fw config configured, wifi6 or wifi7 along with
bluetooth ports are detected.
Change-Id: If0584e91b5143c6df742961657d242c046409b3a
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
PCIe based Bluetooth is on port8. This cl enables bluetooth for PCIe
based Wifi7 module.
BUG=b:345596420
BRANCH=NONE
TEST=With proper FW config enabled, BT gets detected on port8
Change-Id: I989cf6122f2555cc89f622e4ce5d21b574d0458e
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83076
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable pcie based, discreete wifi7 on root port4.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi7 module detection based on cbi settings
Change-Id: I8c2f4a750a1cb00c587bce21bc83ee583d0f4341
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83075
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new fw config field for wifi category as WIFI_6, which is CNVi
based and WIFI_7, which is PCIe based. Also, enable WIFI_6 for existing
CNVi based wifi port as well as bluetooth port.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi6 module detection
Change-Id: I4b218f772405bdb1b741b4d5e640d7b4f145cd76
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83074
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wake configuration and set 'add_acpi_dma_property'=true for CNVi.
Also, add "set 'add_acpi_dma_property' to true to tell the OS to enforce DMA protection for this device.
BUG=b:345596420
BRANCH=NONE
TEST=SSDT dump showed below:
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
Change-Id: If04539fe8dceb5c2edfc06a324ede11147b78b6d
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83138
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures Serial IO UARTs mode as below.
UART0 and UART1 in PCI mode and keep UART2 disable as per hardware design.
BUG=b:338917836
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I5617331aaf505b97e25a717b145fb70dc53f5a38
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83205
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Follow nissa baseboard setting for storage field.
option STORAGE_EMMC 0
option STORAGE_NVME 1
option STORAGE_UFS 2
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I75b4b3037c245f7d517cb33d487f71da98f6c4e8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Fill in ec.h according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ie1edf655fd20c0c1baee01fa90ed03501e3fe161
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83154
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fill ec pins in gpio.h and configure GPE0 DW2 in overridetree according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I9de842a8a66632314d5fdf6444005d34338a1100
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83155
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Configure GPP_R2 as input, no pull according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ic678b77e5489f56d8ff92b265a6ca5852c0f7e8d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add supported memory part in mem_parts_used.txt, then generate.
H54G56CYRBX247
BUG=b:199645942
TEST=run part_id_gen to generate SPD id
Change-Id: I2169d71695d8d133d26cafe5c7be33b976dd8603
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83127
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the vendor spec, I2C1 hold time needs > 100ns.
System needs to adjust the I2C1 sda_hold value from 7 to 13,
the system will change the I2C1 hold time from 70ns to 126ns.
BUG=b:347157276
TEST=built bootleg and verified test result by EE team
Change-Id: I722ec93177b6debf6b4c99de2df68c942560a3ff
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83080
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable LTE, stylus and WFC related GPIOs based on fw_config.
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I91adc4e70d0d23b737d4fa6725cd96e63108f874
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable pcie port7 to prevent s0ix issue when run the FAFT sleep test.
BUG=b:328147465
TEST=Build and check S0ix function and verify FAFT sleep funciton.
Change-Id: I53f704ed11a5c63b5c079c6e60ce2fa32bbd8b1a
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Disable pcie port7 to prevent s0ix issue when run the FAFT sleep test.
BUG=b:335312655
TEST=Build and check S0ix function and verify FAFT sleep funciton.
Change-Id: I7918e26fe382d4d9992a0e2744a2f8894a070e36
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Adjust settings as recommended by thermal team.
Update DPTF parameters based on b:346930334
BUG=b:346930334
TEST= built bootleg and verified test result by thermal team
Change-Id: I363eaa72b5190212b014fe4e2c2fca10e2a3f408
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83079
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust settings as recommended by thermal team.
Update DPTF parameters based on b:346932306
BUG=b:346932306
TEST= built bootleg and verified test result by thermal team
Change-Id: I6a529365249a5372dd87ef28cb9ea8d540b9cac0
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83078
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I3d71a35e9c0a33b72720b093b5a05eb69d5bb9f8
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83060
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add initial override devicetree for riven based on
the latest schematic (Riven(ZDK)_MB_Proto_0601.pdf).
1. Add eMMC DLL tuning value (copy from craask)
2. Configure I2C frequency (copy from craask)
3. Add audio codec and speaker amp settings
4. Add Elan touchscreen settings (copy from craask)
5. Add WFC and usb settings (copy from craask)
6 Add Elan and Synaptics touchpad settings (copy from craask)
7. Add WIFI6(CNVI) and WIFI7(PCIE) configuration
8. Add LTE settings (copy from craask)
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I1dda3557edb44dda9c3a1efaf98437352978561c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83059
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables ACPI brightness controls to be generated, and display
brightness controls to be functional under Windows.
TEST=build/boot Win11 on google/brya (craaskin), verify display
brightness controls present and functional.
Change-Id: I821b912cf52b5b89c5c9d831a5a15566b1b31639
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Configure GPIOs according to schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I760a7a234df43db3a557b3be9e20ff7aa5f80b72
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Turn off camera power during s0ix to improve power consumption.
BUG=None
BRANCH=brya
TEST=built and verified GPP_A17 went to low during s0ix with a scope.
[Measurement of s0ix power consumption - 1 hour avg]
Before this: 301.4 mW
After this: 299.8 mW
Change-Id: Iae02d06e9f5a5988563b2b7ae36d153aecedb9d7
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83029
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Pujjoga support EM060 WWAN, use wwan_power.asl to handle the
power off sequence.
BUG=b:346479638
TEST=Build and boot on pujjoga
Change-Id: I1273d09385c661835d741691b3c4af26e72a9f86
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83042
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, the P sensor does not work.
So add SX9324 registers settings based on tuning value from SEMTECH.
BUG=b:340749850
TEST=Check i2c register settings on Pujjoga and
confirm P sensor function can work by kernel 6.6 driver.
Change-Id: I205c1f5228d792afc763a06f74a8744918e2da75
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82689
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add AX211 wifi sar table for sundance wifi sar config.
Use fw_config to separate different wifi card settings.
WIFI_SAR_TABLE_AX211: 0
BUG=b:332978681
Test=emerge-nissa coreboot
Change-Id: Ide84996da567e4f866a2a1309a6976ed8df635a6
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83044
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add FW_CONFIG probe based on sundance boxster of below devices:
WWAN
Schematic version: NEC_SHIKIBU_ADL_N_MB_EVT_20240330
BUG=b:332978681
TEST=Boot to OS and verify the WWAN devices is set based on
fw_config.
Change-Id: I14339201d8ee21c85fefa96a49323e0c25cb8eca
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83041
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned.
BUG=b:345112878
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I1e5e49c1baa8d2b00134c26cc3b69aa15712b512
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
We use ALC256 as HDA codec on orisa. Add verb table and the
related device tree changes for HDA related registers.
BUG=b:338523452
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I92051886341bd317cce6061ece83439d156b0f90
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82719
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add override devicetree based on schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Id3ceff41fdb8e4a57bd6dab6247b622a5d13587d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Fill in memory config based on the the schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I1456f7385e092b606fc0a35b25f3454600af8b23
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82662
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer to the reference board of nivviks, and update GPIO settings
based on latest schematic (Riven(ZDK)_MB_Proto_0601.pdf).
BUG=b:337169542
TEST=Local build successfully.
Change-Id: Ic43c743fcc2ec89b5a9e2fbe1a87b833d59f1e74
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82973
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar table support for xol. Bit 31 in CBI/FW_CONFIG
is used to select different sar table (index 0 or 1) but only
0 is in used at the moment.
BUG=b:344274789
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Change-Id: Id4dc74c4f2a807d2e531b419ecb7b590d4c32ac2
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add AX211 and AX203 wifi sar table for pujjoga wifi sar config.
Use fw_config to separate different wifi card settings.
WIFI_SAR_TABLE_AX211: 0
WIFI_SAR_TABLE_AX203: 1
BUG=b:336167281
Test=emerge-nissa coreboot
Change-Id: If0f542cb13e93e99960bf65d616b26cee7617a43
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add FW_CONFIG probe based on pujjoga boxster of below devices:
WWAN
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:336167281
TEST=Boot to OS and verify the WWAN devices is set based on
fw_config.
Change-Id: I94cb9ffe47888a8b7b5c6837ddfc390a1d2e77d1
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Enable type-c port 0 USB2 function.
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I0d7adc329a8c26941957d7a7472a5166b07bda5b
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82903
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set LpDdrDqDqsReTraining to 1 for xol. Value 0 will cause black screen
issue.
Reference: https://review.coreboot.org/c/coreboot/+/79527
> FSP default value for LpDdrDqDqsReTraining is 1. For boards
> that didn't set LpDdrDqDqsReTraining to any value, 0 was being
> assigned and it caused black screen issue.
BUG=b:332980211
BRANCH=brya
TEST=Built and verified there is no black screen issue during power
on/off test for over 100 cycles.
Change-Id: Ia346ce559b4509ea1a63abe28b12ad909f9b7b0d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82778
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Due to system spec change, change audio codec ALC5650 to ALC5682I-VS
BUG=b:329787697
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I38e5c58b3ef3fbe709b98601975ae3821bb77213
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update used USB port[2][3](type-a) setting for nova.
BUG=b:328711879
TEST=emerge-constitution coreboot chromeos-bootimage
Change-Id: I63cf97b23627feac05743f2a6e514a33fcaf7dff
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82703
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
The devicetree entry and gpio.c updated as per the schematics of Trulo
to map the OC fault signals from A0/A1 USB ports.
BUG=b:335858378
TEST= Able to build google/trulo
Change-Id: Ic17debc5eecebca8c000c43a660e1b52d2932f2a
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82637
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Sundance support FM101 WWAN, use wwan_power.asl to handle the
power off sequence
BUG=b:343139385
TEST=Build and boot on sundance
Change-Id: I82085172db370ab5a6c0f77afe6042c53b89e43e
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Modify the Goodix touchscreen from new vendor and remove 3 unused
touchscreens. According to the information provided by the key-part
team.
BUG=b:340689681
TEST=Build and check Goodix touchscreen can work.
Change-Id: I1e6349e80431aadf27cd72b8439b01f95348071d
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82427
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Currently Samsung eMMC (KLMBG2JETD-B041) can't power on to OS nomally.
According to Intel provides eMMC DLL delay patch that tuning on each
Sundance different eMMC system to modify some system can't boot to OS problem.
BUG=b:342057438
TEST=Build and check each SKU eMMC can work.
Change-Id: I29d4305bbe5f91d822d947cae942b654e80a8a57
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82602
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds initial PCI device entries into the baseboard
devicetree.cb.
TEST=Able to build google/trulo.
Change-Id: I6ec25b98379cf7c8cbdb5be94d9f3ea43878620c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid
prompting wrong dmesg as below.
```
usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
```
Trulo variants to override the USB ports as per the target
board design.
TEST=Able to build google/trulo.
Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds chip config entries for EC host cmd and memory map
ranges.
TEST=Able to build Google/Trulo.
Change-Id: Id4b0f3bba934c8da56b6d7ca8579b46b6cccac28
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch tries to simplify the baseboard/variant GPIO programming
for Google/Trulo. The idea is to let each variant maintain
its own complete GPIO PAD configuration table instead of having a
back-and-forth call between baseboard and variants.
With this patch coreboot performing GPIO programming is now much
simpler where the common code block calls into respective variants
and gets the gpio table prior to the pad configuration.
BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant)
TEST=Able to build google/orisa.
Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
* Introduce a null check before calling `gpio_padbased_override`
in `variant_configure_pads`.
* This prevents potential errors in cases where the
`variant_gpio_override_table` function returns a null pointer,
indicating that there are no override pads to configure.
BUG=b:334826281
TEST=Able to avoid hang incase there is no GPIO override.
Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1) Add all changes needed for early graphics
2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa
The InnoLux (N156HCN-EBA C7) panel is used for the device tree.
BUG=b:296433986
TEST=On-screen text message seen during MRC training on Craask
Logs:
[NOTE ] MRC: no data in 'RW_MRC_CACHE'
[SPEW ] bootmode is set to: 0
[0.171409] DP PHY mode status not complete
[0.175509] DP PHY mode status not complete
[0.179799] DP PHY mode status not complete
[0.184087] DP PHY mode status not complete
[0.188376] DP PHY mode status not complete
[0.192665] DP PHY mode status not complete
[0.196954] DP PHY mode status not complete
[0.201243] DP PHY mode status not complete
[0.205532] DP PHY mode status not complete
[0.209821] DP PHY mode status not complete
[0.214110] DP PHY mode status not complete
[0.218397] DP PHY mode status not complete
[INFO ] Informing user on-display of memory training.
Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
BUG=b:337178014
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nova will use SOLDERDOWN. Add memory.c to override baseboard.
Update dram id table for correct platform parameter.
BUG=b:328711879
Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add devicetree settings per the schematic.
Differences to gladios:
1. remove SD reader
2. remove EMMC setting
3. modify USB port distribution
FRONT
-------------------------------------------------------
| A3 A1 |
| C0 A2 A0 |
-------------------------------------------------------
BACK
-------------------------------------------------------
| --------------- |
| | TX25A | |
-------------------------------------------------------
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Remove unused setting for retimer.
BUG=b:328711879
Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
