summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Collapse)Author
2023-10-10mb/google/brya/var/dochi: update gpio settingsMorris Hsu
Configure GPIOs according to schematics revision 20230923. TEST=emerge-brya coreboot Change-Id: I10bd1b72c9b0299b8d29ab642fddb5f0c4727652 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2023-10-09mb/google/nissa/var/joxer: Configure Acoustic noise mitigationMark Hsieh
- Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_8 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=b:303533832 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I575da55b96bf4deacec5c0992eae9930eb0745d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-10-09mb/google/nissa/var/joxer: Config I2C frequencyMark Hsieh
Measured the I2C frequency meets spec - I2C0 (TPM): 949.7 Khz - I2C1 (TouchScreen): 395.8 Khz - I2C3 (Audio): 387.4 Khz - I2C5 (Touchpad): 384.8 Khz BUG=b:303356736 TEST=USE="project_joxer emerge-nissa coreboot" and check all I2C devices measurement result Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I17dd1cb7800d00669f86fc6e2b350757695da881 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78218 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-05mb/google/nissa/var/quandiso: Change camera fw_config feildRobert Chen
Quandiso reserve bit 11 for mipi camera usage. BUG=b:300574047 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Id4343083f0d69a49c642657d165ceac349cd7422 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78213 Reviewed-by: Shawn Ku <shawnku@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-05mb/google/nissa/var/quandiso: Add ALC1019 amp supportRobert Chen
BUG=b:300573763 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Iff8167695c302f7b58976516d651a81f1a429bee Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shawn Ku <shawnku@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-05mb/google/nissa/var/uldren: Remove fw_config probe for TS and TPDtrain Hsu
When service center repair touchscreen or touchpad will change compatible device not specific one, the fw_config probe mechanism is not convenient for service center. Removing touchscreen and touchpad fw_config probe for the purpose. BUG=b:297840605 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I66f12ae478f74c019c53ee5e77f7e0f9c324e758 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77538 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-05mb/google/nissa/var/pirrha: Turn off SD card power signal in s0ixSeunghwan Kim
Turn off GPP_H13 (EN_PP3300_SD_X) in s0ix for power saving. It reduces about 3mW of power consumption in s0ix on pirrha proto board. BUG=b:300845527 TEST=Built and verified GPP_H13 voltage was 0V in s0ix. Also verified SD card worked after s0ix for 20 times. Change-Id: I5ec53820276e50f5b8b01584595118cf2dc4c95c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-04mb/google/brya/var/yavilla: Add VCM power control sequenceSerin Yeh
Add VCM power control to configure 2.8V and reset pin, and VCM can be powered on/off properly. BUG=b:292907385 TEST=Run ITS test Change-Id: I242025836fd50076a40ffcc4e5d4a5d5bc6fb4d0 Signed-off-by: Serin Yeh <serin.yeh@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78170 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04mb/google/nissa/var/yaviks: Add probe in devicetree for USB C1/A0 portWisley Chen
Add probe fw_config to USB C1/A0 port on daught_board for DB_1A sku. BUG=b:294456574 TEST=emerge-nissa coreboot Change-Id: I2261b0e4d2b673b6186a435cce8dc6a4ccacb0a7 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-09-29mb/google/nissa/var/yavilla: Add elan and G2 i2c touchscreenShon Wang
Implement support for elan i2c touchscreen and use fw_config to pick between i2c or HID-over-i2c touchscreen. Support G2 TS have different slave address by fw_config BUG=b:295272539 BRANCH=firmware-nissa-15217.B TEST=build and verified touchscreen work Change-Id: I5e3f85106606d84e1cfa204e62b7b2662db6546b Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-09-28mb/google/nissa/var/craask: Correct the USB setting by fw_configRen Kuo
Modify the settings: 1)Add fw_config probe on USB type C for "DB_1C_LTE". 2)Add fw_config probe on USB type A for "DB_1A_HDMI". BUG=b:296791122 TEST=build and check USB functions on craask Change-Id: I2775098ab380995e62f264bc51a430762c256c4b Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78169 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-26soc/intel/alderlake: Move C State Demotion to mainboard configSean Rhodes
Rather than disabling C State demotions for every single Raptor Lake board due to an issue with S0ix, regardless of if they even use S0ix, configure it in the mainboard. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4f941a549bc717ae2f8ec961ead7ac7668347c99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-09-26mb/google/brya/var/dochi: Add memory configMorris Hsu
Configure the rcomp, dqs and dq tables based on the schematic. BUG=b:298337185 BRANCH=firmware-brya-14505.B TEST=FW_NAME=dochi emerge-brya coreboot Change-Id: I182e287423e6f784712c5004a6fe2d12a5b36190 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-09-26mb/google/nissa/var/pirrha: Add 4th DTT sensorSeunghwan Kim
Add 4th sensor device for DTT tuning. BUG=b:292134655 TEST=Built and verified DTT tool could monitor the new sensor device Change-Id: I62f50711af81dfc1566d655f6dcfc66f68dbc794 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
2023-09-25mb/google/brya: Add SOF driver entries for Nissa-based boardsMatt DeVillier
Facilitates correct profile selection by SOF Windows drivers. Profiles for nokris and quandiso will be added once correct board configs can be determined. TEST=build/boot Win11 on google/craask, verify correct audio profiles loaded, audio functional. Change-Id: Id4582b5dd74a4905ea509813ec99663577360095 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: CoolStar <coolstarorganization@gmail.com>
2023-09-25mb/google/brya/var/dochi: add generic LPDDR5 SPDs for DochiMorris Hsu
Add Makefile.inc to include five generic LPDDR5 SPDs for the following parts for Dochi: DRAM Part Name ID to assign MT62F1G32D2DS-023 WT:B 0 (0000) K3KL8L80CM-MGCT 1 (0001) H58G56BK8BX068 0 (0000) BUG=b:298337185 TEST=USE="project_dochi emerge-brya coreboot" Change-Id: If0fd4bc950cef484db53b7b21849cfdfdd7816a5 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-22mb/google/nissa/var/quandiso: Update USB port configRobert Chen
1. Support world facing usb camera on usb2_port7. 2. Update MB/DB fw_config to distinguish LTE and non-LTE devices. BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I0c508475fdc86f0d7357f19684bdaae06e77fc27 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77398 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-22mb/google/nissa/var/quandiso: Add P-sensor supportRobert Chen
- GPIO changes: GPP_B5 ==> I2C_P_SENSOR_SDA GPP_B6 ==> I2C_P_SENSOR_SCL GPP_H19 ==> P_SENSOR_INT_L - I2C SX9324 support - Disable GPIOs when sub board LTE not used BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I5ed82b125b6c594225efca418017ef42f4f63b9d Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-09-22mb/google/nissa/var/quandiso: Add SD card supportRobert Chen
GPIO changes - GPP_D8 ==> SD_CLKREQ_ODL - GPP_D17 ==> SD_WAKE_N - GPP_H12 ==> SD_PERST_L - GPP_H13 ==> EN_PP3300_SD_X Genesys Logic GL9750 support BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ib7c80f43680481c0d1a18662fa494012390a984d Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77391 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-22mb/google/nissa/var/quandiso: Disable WCAM supportRobert Chen
Quandiso doesn't support mipi WCAM. BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I8a166d0bb1c034f2e3a5af7456500abd078e93f9 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77389 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-22mb/google/nissa/var/quandiso: Update initial files based on yavillaRobert Chen
Update files copied from yavilla - fw_config setting - GPIO setting - Kconfig setting - overridetree setting - SPD memory parts - variant setting BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage flash bin file in DUT Change-Id: Ibbef42a1f891d0cf0309aa76edd7ec5dd664588e Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77361 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-16mb/google/brya0: Configure _DSC for camera devicesBora Guvendik
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Boot to OS, check camera LEDs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib9375d602171aa5018b1add1deac3021724dc207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-15mb/google/brya/var/craask: Disable C1 PMC mux conn for HDMIRen Kuo
Add fw_config - DB_1A_HDMI for craaskana, and disable C1 PMC mux conn for HDMI. BUG=b:296791122 TEST=build and check HDMI function works on craaskana Change-Id: Ibaa0cd917a23b7f670ecd648765d1eb566edfe61 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77890 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2023-09-15mb/google/brya/var/pujjo: modify wifi sar table for pujjo1eLeo Chou
1. WIFI_SAR_ID_4: AX211 2. WIFI_SAR_ID_5: AX203 (without WiFi-6E) BUG=b:293360900 TEST=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I6c4705d25d927aaefbc8814ea1df3b4c36b30968 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77790 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/brask/var/kuldax: Add fw_config probe for USB HubDavid Wu
Kuldax-refresh use USB Hub, add fw_config probe for USB Hub. BUG=b:275335023 BRANCH=brya TEST=Built and check firmware log. Change-Id: Ib983ca527a891718f317336597faad66d076247f Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-13mb/google/brya: Create dochi variantMorris Hsu
Create the dochi variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:299570339 BRANCH=firmware-brya-14505.B TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_DOCHI Change-Id: Iadeb97bd217278cdf777ae350100313b4345ecf3 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77756 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13mb/google/brya/var/craask: Add audio codec ALC5650Ren Kuo
Add audio codec ALC5650 related settings. BUG=b:289969623 TEST=emerge-nissa coreboot confirm the device in kernel log. Change-Id: I4b8a19e6248bd91cfc31feb84c6108413cd719e2 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77701 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13mb/google/nissa/var/pujjo: Select VBT based on FW_CONFIG for pujjo1eLeo Chou
Select pujjo1e vbt bin files based on PANEL_IVO_BOE field of FW_CONFIG. BUG=b:299852789 TEST=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I344f97331e79e713af47ad743e27794e21be4ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-13mb/google/brya/var/pujjo: modify fw_config to separate pujjo1e wifi sar tableLeo Chou
Use fw_config for a dedicated pujjo1e intel wifi sar table. BUG=b:293360900 Test=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I635d3d23384cc4efd85b0c420817dd18a65d2872 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77648 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-07mb/google/nissa/var/craask: Modify SD_CARD element to prevent confuseTyler Wang
Modify SD_CARD element "SD_GL9750S" to "SD_PRESENT" to prevent confusion. Origin: 0 --> SD_GL9750S Modify: 0 --> SD_PRESENT BUG=b:296505165 TEST=emerge-nissa coreboot Change-Id: Ic355b7df9f9added4489a764f774851f2e4451c3 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-09-07mb/google/brya/var/{kano,osiris,taeko}: Add null pointer checkWisley Chen
Without part no. in CBI, mainboard_get_dram_part_num returns null. To prevent passing this null pointer to strcmp and avoid unexpected behavior, proper handling is necessary. BUG=none TEST=emerge-brya coreboot Change-Id: I47e42376c6b1347c56afaec218aed63c5469f0aa Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77646 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-07mb/google/brya/var/yavilla: Add VBT data fileRobert Chen
Add data.vbt file for yavilla recovery image. Select INTEL_GMA_HAVE_VBT for yavilla which currently have a VBT file. BUG=b:298320552 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I72f98181b3487f8ae9acf6e0f2382a0204f7989c Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-06mb/google/nissa/yaviks: Disable V1P05 control pinWisley Chen
Yaviks already disabled external V1P05, so disable V1P05 control pin which controls the VCC_V1P105_EXT_1P05. BUG=b:294456574 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I4128cfcfa5be0d141f0173e87518407331d79e8e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77645 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-05mb/google/nissa/var/yavilla: Disable SUSCLK based on fw_configShon Wang
Disable SUSCLK for MT7922 based on FW_CONFIG to avoid power leakage. SAR_ID_0 : Yaviks_Gfp2 SAR_ID_1 : Yaviks & Yavilla_MT7921 SAR_ID_2 : Yahiko_Gfp2 SAR_ID_3 : Yavilla_MT7922 BUG=b:298138654 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I2f191683d0623aa5dce815998a24fddce2a36b2c Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77559 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-05mb/google/nissa/var/yaviks: Disable AUX pins based on FW_CONFIGWisley Chen
Configure the AUX pins as NC based on the FW_CONFIG setting when the C1 port is not present. BUG=b:294456574 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I24fb8f16c2e3b05edf1056b5687ae5ea28c022c0 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-05mb/google/nissa/var/yavilla: Restore WLAN_PERST_L power sequenceTony Huang
Restore TPERST_HIGH to 160ms since it has beed validated in other OEM projects and haven't heard any issue so far. This change back commit d710c6d5a773 ("mb/google/nissa/var/yavilla: Adjust WLAN_PERST_L power sequence"). BUG=b:295277868 TEST=emerge coreboot boot to system and check wifi connection is fine Change-Id: Ifc66e596fc7b6efdc0c286ee187969c8774bdc80 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-05mb/google/nissa/var/pirrha: Use GpioInt instead of GPE for digitizer penSeunghwan Kim
Currently pirrha's digitizer pen uses GPP_F12 for I2C HID interrupt signal. But its IRQ number is the same as GPD2, which is used as EC_SYNC_IRQ. It caused EC driver loading error from dmesg: cros_ec_lpcs GOOG0004:00: Failed to request IRQ 98: -16 cros_ec_lpcs GOOG0004:00: couldn't register ec_dev (-16) cros_ec_lpcs: probe of GOOG0004:00 failed with error -16 So change the digitizer pen interrupt type to GpioInt to prevent the conflict. BUG=b:292134655 TEST=Verified EC driver reported no error and pen device worked Change-Id: Ieb88e87fcfb06544a4b5b5133b752aa821fab76a Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77346 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-05mb/google/nissa/var/pirrha: Update device configurationsSeunghwan Kim
Based on schematics and gpio table of pirrha, generate overridetree.cb to configure internal devices and generate fw_config.c to override GPIO configurations following FW_CONFIG. BUG=b:292134655 TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage Change-Id: I91013b0ad89e26f0a4c433c305c6b883d000f042 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77116 Reviewed-by: Jamie Chen <jamie.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jimmy Su <jimmy.su@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-09-02mb/google/nissa/var/uldren: Enable Weida touchscreenDtrain Hsu
Support Weida WDT8790A touchscreen. BUG=b:297453122 BRANCH=firmware-brya-14505.B TEST=touchscreen is workable and evtest shows WDHT2601 $evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Lid Switch /dev/input/event1: Power Button /dev/input/event10: sof-cs42l42 HDMI/DP,pcm=2 /dev/input/event11: sof-cs42l42 HDMI/DP,pcm=3 /dev/input/event12: sof-cs42l42 HDMI/DP,pcm=4 /dev/input/event13: sof-cs42l42 HDMI/DP,pcm=5 /dev/input/event2: AT Translated Set 2 keyboard /dev/input/event3: cros_ec_buttons /dev/input/event4: Elan Touchpad /dev/input/event5: WDHT2601:00 2575:0921 /dev/input/event6: WDHT2601:00 2575:0921 Stylus /dev/input/event7: WDHT2601:00 2575:0921 Stylus /dev/input/event8: DELL Dell USB Entry Keyboard /dev/input/event9: sof-cs42l42 Headset Jack Change-Id: If9539afaf891c8352bc7fc8e548fd77ea57ea6ca Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77575 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-02mb/google/nissa/var/yaviks: Add wifi sar for yahikoWisley Chen
Add intel wifi sar table for yahiko BUG=b:298280621 BRANCH=firmware-nissa-15217.B TEST=build, enable iwlwifi debug option, and check dmesg Change-Id: I38d2e640fc2f7cbde3986474ca1bf7de9b2d25b4 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77585 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-02mb/google/brya/var/skolas: add nau8318 speaker supportMac Chiang
Add variant of NAU8318(SPK) + NAU88L25B(Headphone) audio support on brya and skolas board. In fw_config settings, reuse max98360_enable_pads[] due to identical i2s configurations as nau8318. In addition, separated GPP_R7 as SPK_BEEP_EN pin. BUG=b:236561637 TEST=emerge-brya coreboot BRANCH=none Signed-off-by: Mac Chiang <mac.chiang@intel.com> Suggested-by: David Lin <CTLIN0@nuvoton.com> Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Change-Id: Ife47a83fca902cf63e09d11206e9d99fac0dc9a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-28Revert "mb/google/brya: fix MRC cache failure for hynix parts"Nick Vaccaro
This change causes a freeze during boot on an RPL-UR that does not have the memory part string in the CBI. BUG=b:296353047 BRANCH=firmware-brya-14505.B TEST='emerge-brya coreboot chromeos-bootimage', flash and boot problematic DUT to kernel. This reverts commit c51a7cdde4e1cb9014be401136c3f07f220ef365. Change-Id: I99fe5111b5294673d9e0a5d13f9c240e0f4a92c3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77516 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: <srinivas.kulkarni@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26mb/google/nissa/var/yaviks: Disable SUSCLK based on fw_configWisley Chen
Disable SUSCLK for MT7922 based on FW_CONFIG to avoid power leakage. BUG=b:296511904, b:294456574 BRANCH=firmware-nissa-15217.B TEST=build and verified by EE Change-Id: I9a6bf0ab7cc77f95e0d64f1380eac9e022fc08e4 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77383 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-25mb/google/brask/var/kuldax: Set customized_leds value for RTL8111KDavid Wu
Set customized_leds value for RTL8111K to fix led can't work. BUG=b:297093096 BRANCH=firmware-brya-14505.B TEST=Verified RTL8125 and RTL8111K led can work normally. Change-Id: Icb8624005e7e24398abdd242570970c6bfa8a09f Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77390 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-25mb/google/brya: Create nokris variantChen-Tsung Hsieh
Create the nokris variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:285838647 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_NOKRIS Change-Id: If7cb00ce978236746dfe4d097d1f20aeebb96a35 Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-08-25mb/google/nissa/var/joxer: set the DB_USB field in FW_CONFIGMark Hsieh
Joxer will have SKUs with no type-c on daughter board, add fw_config for EC control it. BUG=b:297131468 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie8098f72e29a10ebbaf3ba3b09d6a002d09fd35a Reviewed-on: https://review.coreboot.org/c/coreboot/+/77394 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/nissa/var/yaviks: rename DB_NONE to DB_1AWisley Chen
Yaviks doesn't have none DB sku, and rename to DB_1A for yahiko. BUG=b:294928078, b:294456574 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Icb952c0716d446d5feb5580f357120a27193284e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77384 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/brya/var/vell: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I62103563ec49769cd842fedf8c2c55118c55aa14 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/taniks: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I12fa83987869b9a52940a49e9f7897d62abf59ff Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/taeko: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I07e85f28c4f260d04317ec594e162db20f3d4ddd Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/volmar: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Ie7982d1001c4a65322b4e6fdbd70b20c8eee6f0e Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/primus: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I78eee4c5f11b06fbc104182a4313c20be91b821b Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76905 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/brya/var/osiris: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I6157894b96da2e9faed229a1f18c0c0b7c60897b Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/omnigul: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Ie0304ea4343361ff0395c7204ebb76bffb5a6d97 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/mithrax: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Icdb8e9a20ab536f80fa7358472cca01996faf447 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/marasov: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Ie2c089c0418f76ac7c8ce2e531dbbc91c66f34a0 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76901 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/brya/var/kano: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I15888b4e5bd46c98e0864eaa6850e1a24b22fe65 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76900 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/brya/var/gimble: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Ief27cd6e32780683c53a88d73194c6d82c6c212b Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/felwinter: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I7be4a47ea2a8cb2b6f4a2d633252eec523807da6 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24mb/google/brya/var/crota: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Ic5343de88f5f089c9ec4a992f5a6383c08641568 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76897 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24mb/google/brya/var/banshee: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: Iced1061bab224d918fd5f0525423ac6858e1799b Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-23mb/google/brya: Create quandiso variantRobert Chen
Create the quandiso variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_QUANDISO Change-Id: I846c39260e2db504d7bec6e81a8317b6824c17f4 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-23mb/google/brask/var/constitution: Separate wifi sar tableMorris Hsu
Separate constitution and intrepid wifi sar table in variant.c BUG=b:291859402 BRANCH=firmware-brya-14505.B TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I0f89b3d5f5252a2b55bad4d91ad4ab9ec7519c50 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77242 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-22mb/google/brya/var/bb/brask: enable HDMI gpios earlyNick Vaccaro
Add some HDMI-related gpios that are needed for early sign-of-life to the early_graphics_gpio_table array so that SOL will show up on HDMI ports. BUG=b:277861633 BRANCH=firmware-brya-14505.B TEST=`emerge-brya coreboot chromeos-bootimage` and verify it builds without error. Change-Id: Ic36a636e68c2d457f40329a2e9c69dab5bbba41f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77353 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18mb/google/brya: Add VBT data files for variantsMatt DeVillier
Add data.vbt files for all variants supported by current brya, brask, and nissa recovery images. Select INTEL_GMA_HAVE_VBT for all variants which currently have a VBT file. TEST=build/boot various brya variants (banshee, osiris, redrix) Change-Id: Ic66f91e264d37c3742cb17994f637604d77a1576 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77144 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17mb/google/nissa/var/yaviks: Disable SD card based on fw_configWisley Chen
Disable pins for SD card based on fw_config. BUG=b:294456574 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I0b383d1b00056a69ba925bb5203dc4ca026b9d8e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77105 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-16mb/google/nissa/var/pirrha: Update DQ/DQS tableSeunghwan Kim
BUG=b:292134655 BRANCH=nissa TEST=Boot to OS on pirrha ADV board Change-Id: I65429ec8d30b4458511f7c0138652528aadfde25 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76892 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-16mb/google/nissa/var/yaviks: Add elan i2c touchscreenWisley Chen
Implement support for elan i2c touchscreen and use fw_config to pick between i2c or HID-over-i2c touchscreen. BUG=b:294456574 BRANCH=firmware-nissa-15217.B TEST=build and verified touchscreen work Change-Id: I32ba97f5e5f6d280d1ae47da22360fde421a26c0 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-13mb/google/nissa/var/yavilla: Adjust WLAN_PERST_L power sequenceTony Huang
With this change TPERST_HIGH could met spec. Before 160ms After 460ms(met spec min=400ms) BUG=b:295277868 TEST=emerge coreboot EE measured power sequence met spec boot to system and check wifi connection is fine Change-Id: Ifb909a55b36f2366132c3e20021c4bde4bc87a05 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-08-13mb/google/nissa/var/pirrha: Add GPIO tableSeunghwan Kim
Add GPIO table for pirrha based on pirrha ADV board schematics. BUG=b:292134655 TEST=FW_NAME=pirrha emerge-nissa coreboot Change-Id: I1f45365665b200fa97766344df2f9e06bc6dfb3d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76882 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-11mb/google/brya/var/anahera: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I7a775838358e7abe3f03d0ae65fb619c15dbad6f Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76875 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-11mb/google/nissa/var/joxer: Update eMMC DLL settingsChia-Ling Hou
Update eMMC DLL settings to solve eMMC boot error. BUG=b:294196963 TEST=Reboot test 1000 times pass Change-Id: I16f3aa6aab4c58369770acad92c7ee5518c719ab Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77082 Reviewed-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-09mb/google/brya/var/yavilla: Modify NVM size and width sizeSerin Yeh
NVM has 8KB to store camera module related settings and parameters. According to NVM hardware spec, the NVM size should be 0x400 and the width size should be 0x08. Re-set the right NVM format and ensure camera related configs can get the correct module information. BUG=b:294155898 TEST=none Change-Id: I58932bc0f3dd935aa0ea8e68b2a4b0ae4907b316 Signed-off-by: Serin Yeh <serin.yeh@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76893 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-09mb/google/brya: Use runtime detection for touchscreensMatt DeVillier
Now that power sequencing has been implemented, switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. TEST=build/boot Windows/linux on redrix?, verify touchscreen functional in OS, dump ACPI and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I0273014b2d164f67f503da7b968a09256bffb43c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74929 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-09mb/google/brya: Implement touchscreen power sequencingMatt DeVillier
For brya variants with a touchscreen, drive the enable GPIO high starting in romstage while holding in reset, then disable the reset GPIO in ramstage (done in the baseboard). This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). BUG=b:121309055 TEST=tested with rest of patch train Change-Id: I8e56ac4834ce69de18bef2d34f5c361a7fda1aab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-08mb/google/brask/var/kuldax: Set power limit values for RPL SKUsDavid Wu
Add the RPL CPU power limits and system power limits based on the suggestion of the thermal team for RPL SKUs. The PL4 value suggested by the thermal team which is different from the reference document 686872. BUG=b:292471206 BRANCH=firmware-brya-14505.B TEST=built and booted into OS. Change-Id: Ia030d13ca276c5e8340ae3b20d6e169bb162751d Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76769 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2023-08-08mb/google/nissa/var/yavilla: Update eMMC DLL settingsTony Huang
Update eMMC DLL settings to prevent eMMC initialization error BUG=b:290567342 TEST=warm/cold reboot stress test 2500 times pass Change-Id: I418836ec3e2d2221c219eae35e2b22aeaacce4a5 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-05mb/google/nissa/var/craaskov: Add wifi sar tableJamie Chen
Add wifi sar table for craaskov BUG=b:290739538 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ib21f674b6749e125bf76a196902c994bfac15e65 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76576 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-05mb/google/nissa/var/craaskov: Configure the external V1p05/Vnn/VnnSxRex Chou
This patch configures external V1p05/Vnn/VnnSx rails for Craaskov to follow best practices for power savings – untested though. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 , S0 states. * Set the supported voltage states. * Set the voltage for v1p05 and vnn. * Set the ICC max for v1p05 and vnn. BUG=b:290165011 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Ibaf6a285788e26688d3d42691ab40052ef6d6cdb Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76926 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-05mb/google/nissa/var/craaskov: Add DPTF parametersVan Chen
The DPTF parameters were verified by the thermal team. Based on thermal table in 290705146#comment11. Set "tcc_offset" = "8" BUG=b:290705146 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I2d9e1ad2e2fa98757d76578956101a482073885e Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76712 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-03mb/google/nissa/var/pirrha: Generate SPD ID for supported memory partSeunghwan Kim
Add pirrha supported memory parts in mem_parts_used.txt, generate SPD IDs for them. 1. K3KL8L80CM-MGCT (Samsung) 2. K3KL6L60GM-MGCT (Samsung) BUG=b:292134655 BRANCH=nissa TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage Change-Id: Ib3f5a5e5c8296f976d92f0196026d7bb63845664 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76881 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03mb/google: Add more comment on GFX devices for the future referenceWon Chung
Add more details to instruct future boards/models implementers regarding how GFX devices should be added. If HDMI and DP connectors are enumerated by the kernel in /sys/class/drm/ then corresponding GFX device should be added to ACPI. It is possible that some connectors do not have dedicated ports, but still enumerated. The order of GFX devices is DDIA -> DDIB -> TCPX. BUG=b:277629750 TEST=emerge-brya coreboot Change-Id: I59e82ee954a7d502e419046c1c2d7a20ea8a9224 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76776 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-03mb/google/nissa/var/craaskov: Add overridetreeRex Chou
Add override devicetree based on schematics(ver. 20230714). BUG=b:290248526 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Id002282d91dc94b00f5d133203b62ca39d6cae6d Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76662 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-02mb/google/nissa/var/craaskov: Configure GPIOs according to schematicsRex Chou
Configure GPIOs based on schematics and confirm with EE. BUG=b:290248526 BRANCH=None TEST=emerge-nissa coreboot Change-Id: I17fc9333a0ef592ea36b196b3fd417be47fb82bb Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-08-02mb/google/nissa/var/joxer: support DPTF oem_variablesMark Hsieh
1. Joxer uses dptf.dv to distinguish 6W/15W by setting OEM variable. 2. Update passive policy and critical policy. BUG=b:285477026, b:293540179 TEST=emerge-nissa coreboot and check the OEM variable. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4e52ac624f7d7628cce3035a2bac67fc527bc167 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ivan Chen <yulunchen@google.com>
2023-07-31mb/google/brya/var/vell: Disable PCH USB2 phy power gatingShon Wang
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for vell board. Please refer Intel doc#723158 for more information. BUG=b:293535284 TEST=build and boot vell Change-Id: I8a4d633fbd362188aedef373e515c7bfe5c4327a Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-31mb/google/brya: Create pirrha variantRaymond Chung
Create the pirrha variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:292134655 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PIRRHA Change-Id: Idc0a4dbb467cbdb91a5ed55c5e0a9e898e775b11 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76768 Reviewed-by: SH Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31mb/google/nissa/var/gothrax: Adjust touchscreen driverYunlong Jia
Vendor changes touchscreen firmware to use hid method instead of i2c. BUG=b:274707912 BRANCH=None TEST=emerge-nissa coreboot Change-Id: I8e9e0b757e337db6af3fbf3cd4fdbc0079646179 Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76680 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-07-28mb/google/nissa/var/gothrax: Tune SX9324 P-sensor configurationYunlong Jia
Update SX9324 register settings based on tuning value from SEMTECH. －　Enable GPP_B5/GPP_B6 －　Enable GPP_H19 open irq －　Adjust register reg_afe_ctrl0/reg_afe_ctrl3/reg_afe_ctrl4 BUG=b:292016304 BRANCH=None TEST=Check register settings and confirm P-sensor function can work. Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I6f15f7a7c428aee45d35830574ef84aefcae6401 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76711 Reviewed-by: Kyle Lin <kylelinck@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-07-28mb/google/brask/var/constitution: Add wifi sar tableMorris Hsu
Add wifi sar table for constitution BUG=b:291859402 BRANCH=firmware-brya-14505.B TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I8f99c5cf486cb3e1f2825bbe3a8084f2fe57a41a Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76674 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-07-27mb/google/nissa/var/uldren: Modify GPIOs for non-touchscreenDtrain Hsu
Set GPP_C6(TCHSCR_REPORT_EN) and GPP_C7(TCHSCR_INT_ODL) to NC for non-touchscreen sku. BUG=b:283199751 BRANCH=firmware-nissa-15217.B TEST=build and boot to ChromeOS Change-Id: Ie062eef24f640c3d6c4a0b4c77792e57ac3a722c Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-27mb/google/nissa/var/uldren: Add FW_CONFIG probe for fivrDtrain Hsu
Uldren will support internal fivr in next phase and using fw_config to decide the board with internal or external fivr. BUG=b:287379760 BRANCH=firmware-nissa-15217.B TEST=boot to ChromeOS, cold reboot/suspend/recovery mode/install OS work normally. Change-Id: I8a1ac60f599f2895654946d9fa1c4e1f2657fd10 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-07-27mb/google/nissa/var/craaskov: Add memory parts supportRex Chou
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1) LP5 Memory - 2GB Micron MT62F512M32D2DR-031 WT:B 2) LP5 Memory - 2GB Hynix H9JCNNNBK3MLYR-N6E 3) LP5 Memory - 4GB Samsung K3LKBKB0BM-MGCP 4) LP5 Memory - 4GB Hynix H9JCNNNCP3MLYR-N6E DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) H9JCNNNBK3MLYR-N6E 0 (0000) K3LKBKB0BM-MGCP 1 (0001) H9JCNNNCP3MLYR-N6E 2 (0010) BUG=b:292461498 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I02e49d60e43c4fed8356556ec194d726c30cd609 Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-07-26mb/google/brya/var/anahera: Disable PCH USB2 phy power gatingWisley Chen
The patch disables PCH USB2 Phy power gating to fix display flicker BUG=b:292403156 TEST=Verified on the defeat board Change-Id: If0c0e655c5d32f39b90635bb3c1d13d8b6993b59 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-07-26mb/google/brya: fix MRC cache failure for hynix partsNick Vaccaro
Set the cs_pi_start_high_in_ect if the DUT is using one of the two following Hynix parts: H54G56CYRBX247 and H54G46CYRBX267. Failure to set cs_pi_start_high_in_ect when using these parts will result in an MRC cache failure and DUT will fail to boot. BUG=b:292153199 TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot brya variant to kernel. Change-Id: I36040139b959c85c3ac220a34574caa12ca6c5fe Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-26mb/google/brya/var/redrix: Disable PCH USB2 phy power gatingWisley Chen
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for redrix board. Please refer Intel doc#723158 for more information. BUG=b:292435264 TEST=build and boot redrix Change-Id: I34d10c763f4710d2c5678704320fd1cc8d8b6287 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76670 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-26mb/google/nissa/var/yavilla: avoid mipi camera LED blinking during launchRobert Chen
Camera LED will blink several times as sensor is being probed during kernel boot. Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:292173903 TEST=Build and boot on Yavilly EVT unit. Verify & observe Camera LED blinking behavior. Change-Id: Ic3e3439dc9313325189761b277e1a3bd1c1d9418 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76671 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-25mb/google/nissa/var/pujjo: Generate SPD ID for new supported memory partLeo Chou
Add pujjo new supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Hynix H58G56BK7BX068 2. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT 3. Micron MT62F1G32D2DS-026 WT:B BUG=b:292452868 TEST=Use part_id_gen to generate related settings Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Ia123a1cfd93a5e08ab0ba65f1d9be240d60ff356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76672 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-20mb/google/nissa/var/uldren: Decrease GT7996F stop_delay_ms to 200msDtrain Hsu
In order to reduce S0ix resume time, decrease stop_delay_ms from 300ms to 200ms for Goodix GT7996F. The value source is from https://partnerissuetracker.corp.google.com/issues/285999032#comment16. BUG=b:285999032 BRANCH=firmware-nissa-15217.B TEST=boot uldren to ChromeOS and touchscreen is workable. Change-Id: I2f0adadbd3d0774da03338cc0abd1639104876d9 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76577 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 17:45:09 +0000