| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL).
BUG=b:358439747
TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C.
Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login
screen, it is because it inserts 12 blank frames if it receives the
unmute in VB-ID.
Always override the mute in VB-ID to avoid Tcon EC detected the
audiomute_flag change.
BUG:b=357764688
BRANCH=firmware-nissa-15217.B
TEST:Verfied on Anraggar and cannot reproduce the issue
Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
TEST=Build and boot nivviks. Monitor the camera LED blinking
during boot.
Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807.
Reason for revert: We applied this patch for touchpad stuttering issue
for XOl, but the same touchpad problem was reported. So we would revert
this change and apply kernel patch (crrev/c/5808335) to avoid the
touchpad issue.
Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI_CATEGORY to choose the right wifi_sar hex file.
Below is the file mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:345596420
TEST=emerge-nissa coreboot chromeos-bootimage
Cq-Depend: chrome-internal:7607427
Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:348258637
TEST=Local build successfully and boot to OS normally.
Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table.
BUG=b:358472598
TEST=Build and verified test result by EE team
Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: I0908ff500434401bf89a5313427cf304f32cf929
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Since the voltage value measured by the USB2 pin of the wlan is 500mv,
it does not meet the design requirements. Adjusting the port length
can reduce the voltage to 450mv, which meets the expected settings.
BUG=b:361037189
TEST=1. The voltage measurements are as expected.
2. The Bluetooth and WiFi functions of the wlan module are
verified to be normal.
Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
Kinox has two VBT options, selected via fw_config. Add the second
option to CBFS, and update the original file.
Extracted from Google_Kinox.14505.704.0.bin.
TEST=build/boot kinix, verify firmware display init successful and
payload menu visible. Verify correct VBT selected via cbmem log.
Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=firmware-brya-14505.B
TEST=verify brask, nissa, or brya DUT is able to power down and stay
powered down when selecting the "Power off" button in the firmware dev
screen.
Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set up soundbar-related GPIOs for updating.
BUG=b:358435383
TEST=emerge-constitution coreboot chromeos-bootimage
Change-Id: I517da8de90487533e49e46649c5acf4ccfcc5160
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83936
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes WWAN configuration from the bootblock.
It appears that setting it up in the bootblock may not be necessary.
Configure in bootblock,the seq will be triggered at the same time.
The customer would like us to leave some buffer for EN to RST.
BUG=b:357764679
TEST=Build and verified test result by EE team
Change-Id: I2c0e789c0bec293f4bca711e53644d62f4f83551
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83792
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Locking GPP_F15 causes DUTs with fingerprint sensor to not be able to
correctly power down and stay powered down. This pin does not need to
be locked.
BUG=b:359692570, b:356750516
BRANCH=firmware-brya-14505.B
TEST=`FW_NAME=gimble emerge-brya coreboot chromeos-bootimage`, flash and
boot gimble into developer mode, then reboot into dev screen and select
the "Power off" button and verify gimble powers off and does not power
itself back up.
Change-Id: I1c73035b02021b0d1268cd46dcd0841621556ad5
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In next phase, riven will remove external fivr. Use the board version
to config external fivr for backward compatibility and show message.
BUG=b:359062365
TEST=build, boot to OS, suspend/resume work normally.
Change-Id: Id5f538b2eda7820a922b8d9ee14b2bae7df3726c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch enables the TCSS XHCI in the devicetree to solve the genesys
hub enumeration issue.
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: Ic8e25756a2975e884434c4c7e3d587f4c1f0ed0b
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83845
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Confirm with EE, the GPP_C1 don't need PU 20K.
So modify GPP_C1 setting to remove PU 20k
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:358162951
TEST=Build and boot on pujjoga.
Change-Id: I7ad16cd29ab467d3eac74dab40522c577d91c747
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83818
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. The P sensor need follow WWAN FW_CONFIG to enable/disable
2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail
Schematic version: 500E_GEN4S_ADL_N_MB_0418
BUG=b:357998089
TEST=1. Boot to OS and verify the P sensor devices is set based on
fw_config.
2. Confirm that the PLT test can pass successfully.
Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change adds the necessary configuration for the elan
touchscreen (ELAN9004) device, connected to I2C bus 16.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset, stop and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:348125053 b:348126380
TEST=emerge-nissa coreboot
boot with elan TS, make sure elan TS is functional.
Change-Id: I64c5a11dfaacfcca34240375d4dca5c76a60f62e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83876
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Because one side is not displayed when using type-c projection, the
configuration of DP AUX BIAS to SOC direct connection is added.
BUG=b:352263941
TEST=DP function of MB and DB workable
Change-Id: Id89d02212cdad549d1c26ed51a8d5af0f4e757c6
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83829
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables pch_hda_sdi_enable for the trulo baseboard and
removes SDI lanes update from its variants.
BUG=b:350931954
TEST=Boot verified on google/craask and google/tivviks
Change-Id: I2e0f43b8fffb5e583089769d2c7446b476ce5d5d
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83859
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds the necessary configuration for the G2 Touchscreen(GTCH7503) device, connected to I2C bus 40.
It includes settings for:
* HID descriptor
* Device description
* IRQ configuration
* Detection
* Reset and enable GPIOs with their respective delays
* Power resource handling
* HID descriptor register offset
BUG=b:350844195
TEST=emerge-nissa coreboot
boot with G2 TS, make sure G2 TS is functional.
Change-Id: If17367cd62eb69a1237efe4aa3ca1a0c9640ba4c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83823
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MKBP device is required for passing events from input sources to AP.
Input sources include buttons (power, volume); switches (lid, tablet
mode) and sysrq.
BUG=b:357521411
TEST=Build coreboot and switch tablet mode on orisa.
Change-Id: Ic712f53fb4063347c38df05167f0100afc06f979
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83819
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch configures the GPIO pins to enable ISH on the Trulo device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/trulo.
Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch configures the GPIO pins to enable ISH on the Orisa device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/orisa.
Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Define ISH main firmware name so ISH shim loader can load firmware
from file system.
BUG=b:354607924
TEST=Boot trulo board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc
Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch introduces the following changes,
- Remove TCSS XHCI (USB 3.x) devicetree settings
- Update Over Current (OC) & USB 2.0 config
- Update TCSS-XHCI capabilities
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the PMC MUX related setting from devicetree as Nova
doesn't include a MUX for it's USB-C port.
BUG=b:348332200
TEST=Able to build google/nova
Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Create the teliks variant of the nissa reference board by copying
the anraggar files to a new directory named for the variant.
BUG=b:352263941
BRANCH=None
TEST=1. util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELIKS
2. Run part_id_gen tool without any errors
Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops fw_config probing for ISH because ISH IP should
remains on by default for all Trulo variants.
Additionally, removed the redundant ISH entries from variant
override devicetree.
BUG=b:354607924
TEST=Able to verify ISH PCI Device is available while booting eMMC sku.
```
lspci
00:00.0 Host bridge: Intel Corporation Device 461c
...
00:12.0 Serial controller: Intel Corporation Device 54fc
...
00:1a.0 SD Host controller: Intel Corporation Device 54c4
```
Also, able to enter S0ix with this patch.
```
> suspend_stress_test -c 1 --ignore_s0ix_substates
At AP console:
s0ix errors: 0
s0ix substate errors: 0
s0ix pc10 errors: 0
At EC console:
power state 5 = S0ix, in 0x38d87
```
Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce PchPmSlpAMinAssert (pch_slp_a_min_assertion_width) to minimum
time (98ms) from 2sec.
BUG=b:349595391
BRANCH=firmware-brya-14505.B
Test=Verified on xol
Change-Id: Ia4b7b7ab5dc9afeb3505dfd2b42d0d397aed7a5c
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83683
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Streamline variant-level overrides by removing redundant entries that
already exist in either the SoC-level or the platform-level configurations.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I0b28354dfb865900a78a9d0738e00aa952eade0e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change adds a new USB2 Bluetooth device configuration on Port 10
for the Trulo variant.
* A new `drivers/usb/acpi` chip is added with:
* `desc` set to "USB2 Bluetooth"
* `type` set to "UPC_TYPE_INTERNAL"
* `reset_gpio` set to "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
* `device` referencing `usb2_port10`
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9a92a4d008eb4d0c339079ecbbb77facece435ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Orisa variant.
It also cleans up a redundant newline before the `serial_io_i2c_mode`
definition.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Icf1ff442530ad2263ad0b58829e5c7b2ce544439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83664
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
|
This patch moves the configuration for integrated Bluetooth
functionality (USB2 Port 9) from Orisa variant to the Trulo baseboard.
This change is necessary to support the CNVi BT module on Trulo
variants. The configuration is skipped for Orisa.
Trulo: USB2 Port 9 is now configured as USB2_PORT_MID(OC_SKIP) to
support the CNVi BT module.
Orisa: The previous configuration of USB2 Port 9 as a Bluetooth port for
CNVi WLAN has been removed.
This change ensures proper Bluetooth connectivity is applicable for all
Trulo variants including Orisa and Trulo.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I760a82cb6f6c98db7249caf1ba7e6d6c5dc8f2c4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83663
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices.
2. Update fw_config probe to enable/disable devices in devicetree.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: Id3a22aa2206e86fdca6f6fadbc849572890fee58
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83657
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures GPIO pins as required for booting the Trulo
device from ramstage.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7b540416083a923ba4d2e52aa8edafb4bfb9ac0e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Xol has a shutdown issue on our reliability test environment:
- High temperature
- No battery condition
It needs to have margin for the PL2 and PL4 values from the adapter
power, this will limit the PL2/PL4 values up to 30W/40W for xol's
45W power adapter. The new values are confirmed by our power team.
BUG=b:353395811
BRANCH=brya
TEST=built and verified MSR PL2/PL4 values.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:18000000 <= MSR PL1 (18W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
[When connected 60W adapter without battery]
Before:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:60000000
After:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:30000000
constraint_2_power_limit_uw:40000000
[When connected 45W adapter without battery]
Before:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:45000000
constraint_2_power_limit_uw:45000000
After:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:30000000
constraint_2_power_limit_uw:40000000
Change-Id: Ic19119042ffdcc15c72764d8c27bcdce9f229438
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
If user continues to use the touchpad for over 3 minutes on Xol, the
pointer movement is stuttering.
Touchpad I2C transaction should appear during the interrupt signal level
is low, but we could see some more I2C transaction after the interrupt
signal(GPP_F14) went to high.
We found experimentally that changing the interrupt type to GPIO_INT
from APIC_IRQ improved this issue. We are still investigating, would
like to apply this change first for Xol's dogfooding.
BUG=b:350609957
BRANCH=brya
TEST=built and verified there's no stuttering issue on touchpad movement
Change-Id: Ie1b59355a694e5a42367a20e03f6c5f93225e79c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
This change adds early and romstage GPIO configurations for the trulo
variant, including:
Early GPIOs:
- GSC (Google Security Controller)
- WP (Write Protect)
- UART0 (for serial debug)
Romstage GPIOs:
- Touch Screen early power sequencing
CrOS GPIOs:
- CROS_GPIO_VIRTUAL
- GPIO_PCH_WP
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ic1b84f61ef62ddbadc2a45758fb3fce90fce0e88
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83568
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds FW Config to the device tree for choosing between the
discrete PD chip.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I0a8fb0225edecb063dede31efaec6f2502476977
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds power related entries (FIVR and policy to control
lower power c-state transitioning) to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ib125c91be79a81f3103dcd587dc685134a292e03
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch adds Thermal related entries (like, TDP, TCC and enabling
DPTF config with required sensor configuration) to the devicetree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I32f9219c0ba6b70f847f0752bff8aa2e4fdd0979
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83565
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Brya/brask devices using NAU88L25 are not recognizing headset buttons
correctly. The reason is we are using wrong reference voltage of
MICBIAS. Use VDDA instead.
BUG=b:352215240
TEST=test with 3.5mm headset with buttons on volume up/down and pause
Change-Id: I0619021c6fd0a196c318aee58e07dc4149f1d64e
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Reorder GPIO pin mapping as per platform documentation:
* GPIO_MEM_CONFIG_0 -> GPP_E2
* GPIO_MEM_CONFIG_1 -> GPP_E1
* GPIO_MEM_CONFIG_2 -> GPP_E12
* GPIO_MEM_CONFIG_3 -> NC
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I4e979686833095a904b114500dc1142def583afa
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83549
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds descriptions for Audio device (Speaker, Jack and Mic)
to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ied531dde856fb7c9a410b5667843c9be759cfc8f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for eMMC device (supported mode and DLL
tuning) to the device tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I8f1310313b8114731aa417610f245f94c8978ac0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree, to
avoid suspend(s0ix) fail issue.
3. Disable eMMC controller incase STORAGE_UFS or STORAGE_NVME fw_config
is enabled.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ifdaa0bf35413981327097c260ab47e757f697e37
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for CNVi WiFi and BT device to the device
tree.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I7396917ca7875dcbe1d35a371cc450a9e070b18d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds descriptions for Low Speed I/O (I2Cx, GSPIx, UARTx)
to the device tree.
It also includes entries that will generate ACPI code at runtime
with LSIO end-point device.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I94a3a7f6f85d84407f32ab4c879b236a80859f2d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83550
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds descriptions for TCSS port, including over-current
(OC) pin configuration, to the device tree.
It also includes entries that will generate ACPI code at runtime
with port definitions, locations, and type information.
Additionally, implement the TCSS PMC MUX programming.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I60de314a92514d153ca039f6eaeb904b117b786c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83548
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds descriptions for USB2/3 ports, including over-current
(OC) pin configuration, to the device tree.
It also includes entries that will generate ACPI code at runtime with
port definitions, locations, and type information.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I873810e401c4afdc162036f01bae7247f9b8c749
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds minimal device entries and chip configs for Trulo
overridetree.cb to boot.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: Ic8b90dbaaabb439c347a891650d255948d48810a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83546
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the EC configuration from the orisa variant to the
trulo baseboard, enabling reuse by other variants in the future.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: Ib5611cf67a41950c1c4ce936a5d2bea7fdca5c68
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83544
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the GPIO configuration from the orisa variant to the
trulo baseboard, enabling reuse by other variants in the future.
BUG=b:351976770
TEST=Builds successfully for google/orisa.
Change-Id: If41c1b567a0ed6397bc935183c832a423f43e8b9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83545
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables SKIP_RAM_ID_STRAPS for the TRULO board variant as
this board design won't stuff MEM strap GPIO hence, sets the static
SPD ID to 0 for the MT62F512M32D2DR-031 DRAM part.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I1acb4680a143611c55f4fa6e032fde38c62af054
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds key DRAM configuration parameters as below:
- Rcomp
- DQ byte map
- DQS CPU<>DRAM map
- ECT
- CCC Mapping
- SPD Index
Source: Trulo Schematics Rev0.5 (dated June'24)
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: Ie7abc393a71becf26d53ae9e4fc56f66c7117051
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch adds Micron Technology LPDDR5 DRAM
(part: MT62F512M32D2DR-031) for Trulo.
Make use of spd_tools to generate SPD file after following the below
steps:
1. make -C util/spd_tools
2. ./util/spd_tools/bin/part_id_gen ADL lp5
src/mainboard/google/brya/variants/trulo/memory
src/mainboard/google/brya/variants/trulo/memory/mem_parts_used.txt
Output files are:
1. dram_id.generated.txt
2. Makefile.mk
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: Id35f6b57b716375abb66db187413f0f82361d962
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83539
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set "option WIFI_SAR_ID_1 1" for WIFI_SAR_ID field in fw_config.
BUG=b:347108861
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I179dad5eeabc1d84aa0a2de5359be5848a2ecc39
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds hda_verb.c to the ramstage build, but only when the
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB config option is enabled.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I9b17126ff1493b5714d6ae715ad2863bdff4ed46
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83499
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixes a pmc_mux port mapping error introduced in coreboot
commit 4fa8354
Mithrax and felwinter do not have sequential mux_conn[X] to connY
mappings which led to the kernel subsystem linking between Type C
connectors and USB muxes to be incorrect. The previous patch
attempted to fix this by changing the custom_pld layout. However
this broke USB usage except for charging.
This patch reverts the custom_pld layout and instead changes the pmc
hidden and tcss_xhci port mappings to match the hardware layout.
BUG=b:352512335 b:329657774 b:121287022 b:321051330 b:204230406
TEST=emerge-${BOARD} coreboot
TEST=Manually check that usb-role-switches are mapped to the correct
port.
Attach USB 3 A to C cable from development machine to left port of
DUT.
Attach nothing to right-hand port.
ectool commands below are only for felwinter as a workaround for
devices without a firmware patch to connect superspeed lines.
ectool usbpd 0 none
ectool usbpd 0 usb
ectool usbpd 1 none
ectool usbpd 1 usb
echo host > /sys/class/typec/port0/usb-role-switch/role (should
succeed)
ls -l /sys/class/typec/port0/usb-role-switch (note CONX-role-switch)
echo host > /sys/class/usb_role/CONX-role-switch/role (should succeed)
echo host > /sys/class/typec/port1/usb-role-switch/role (should fail
as no cable attached)
ls -l /sys/class/typec/port1/usb-role-switch (note CONY-role-switch)
echo host > /sys/class/usb_role/CONY-role-switch/role (should fail
as no cable attached)
BRANCH=firmware-brya-14505.B
Change-Id: Iebd259842d3affa259069cd776b46759c1c60712
Signed-off-by: Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83472
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Several brya variants were missing VBT files, add and select them in
Kconfig.
Also select in Kconfig for VELL, which already had a VBT but was not
using/selecting it.
TEST=build/boot google/brya (marasov), verify display init functional
/ payload screen shown.
Change-Id: I6848c2b78cf37157299d94bf12c0b6d925ea1432
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83434
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fan control is assign to EC handle now. Remove relate setting on coreboot.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Iff0776ce3db6f27e250162357abb3c7e9b1a0dc3
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83380
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree
instead of variant.c, it can avoid suspend(s0ix) fail issue.
BUG=b:328580882
TEST=On riven eMMC and UFS SKUs, boot to OS and run
`suspend_stress_test -c 10` pass.
Change-Id: I518f1a5955fb88f304663112f1e3d4c744bde183
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83405
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia does not support Thunderbolt anymore,
therefore disable related TBT setting.
The bujia fit image CL, cf. chrome-internal:7468938.
BUG=b:349923139
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
Change-Id: I4301a1f744aa9d4de9f0eba4147c49a4bb3ed922
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83402
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia has 4 thermal sensors, so add two missing sensors settings.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
check ACPI SSDT table have new TSR info.
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
check SSDT.dsl
Change-Id: Id9a17a22a717faac829e6b5e300351187a62dd43
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add a new fw config field to determine which firmware edition shall be
flashed to the PDC.
BUG=b:334793686
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I817e9415aca1d2f68b484d8e23b581e1a75d6f84
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83353
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CNVi based Wifi6 is disabled, CNVi based Bluetooth must be turned
off, based on fw_config. Otherwise, when device boots without the cbi
settings for wifi6, boot may fail with assertion error for line 817 &
819 of file 'src/soc/intel/alderlake/fsp_params.c'.
BUG=b:345596420
BRANCH=NONE
TEST=Dut boots fine with both Wifi6 & Wifi7 based cbi settings, along
with enumeration of corresponding BT device.
Change-Id: I03fde02fa4b36f4e47d6f0e95675feddb3bee7cd
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
PCIe based GPIOs of Wifi7 module are enabled based on firmware config.
BUG=b:345596420
BRANCH=NONE
TEST= Based on fw config configured, wifi6 or wifi7 along with
bluetooth ports are detected.
Change-Id: If0584e91b5143c6df742961657d242c046409b3a
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
PCIe based Bluetooth is on port8. This cl enables bluetooth for PCIe
based Wifi7 module.
BUG=b:345596420
BRANCH=NONE
TEST=With proper FW config enabled, BT gets detected on port8
Change-Id: I989cf6122f2555cc89f622e4ce5d21b574d0458e
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83076
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable pcie based, discreete wifi7 on root port4.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi7 module detection based on cbi settings
Change-Id: I8c2f4a750a1cb00c587bce21bc83ee583d0f4341
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83075
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new fw config field for wifi category as WIFI_6, which is CNVi
based and WIFI_7, which is PCIe based. Also, enable WIFI_6 for existing
CNVi based wifi port as well as bluetooth port.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi6 module detection
Change-Id: I4b218f772405bdb1b741b4d5e640d7b4f145cd76
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83074
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wake configuration and set 'add_acpi_dma_property'=true for CNVi.
Also, add "set 'add_acpi_dma_property' to true to tell the OS to enforce DMA protection for this device.
BUG=b:345596420
BRANCH=NONE
TEST=SSDT dump showed below:
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
Change-Id: If04539fe8dceb5c2edfc06a324ede11147b78b6d
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83138
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures Serial IO UARTs mode as below.
UART0 and UART1 in PCI mode and keep UART2 disable as per hardware design.
BUG=b:338917836
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I5617331aaf505b97e25a717b145fb70dc53f5a38
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83205
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Follow nissa baseboard setting for storage field.
option STORAGE_EMMC 0
option STORAGE_NVME 1
option STORAGE_UFS 2
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I75b4b3037c245f7d517cb33d487f71da98f6c4e8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Fill in ec.h according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ie1edf655fd20c0c1baee01fa90ed03501e3fe161
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83154
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fill ec pins in gpio.h and configure GPE0 DW2 in overridetree according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I9de842a8a66632314d5fdf6444005d34338a1100
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83155
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Configure GPP_R2 as input, no pull according to schematic_20240614.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ic678b77e5489f56d8ff92b265a6ca5852c0f7e8d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add supported memory part in mem_parts_used.txt, then generate.
H54G56CYRBX247
BUG=b:199645942
TEST=run part_id_gen to generate SPD id
Change-Id: I2169d71695d8d133d26cafe5c7be33b976dd8603
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83127
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the vendor spec, I2C1 hold time needs > 100ns.
System needs to adjust the I2C1 sda_hold value from 7 to 13,
the system will change the I2C1 hold time from 70ns to 126ns.
BUG=b:347157276
TEST=built bootleg and verified test result by EE team
Change-Id: I722ec93177b6debf6b4c99de2df68c942560a3ff
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83080
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable LTE, stylus and WFC related GPIOs based on fw_config.
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I91adc4e70d0d23b737d4fa6725cd96e63108f874
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable pcie port7 to prevent s0ix issue when run the FAFT sleep test.
BUG=b:328147465
TEST=Build and check S0ix function and verify FAFT sleep funciton.
Change-Id: I53f704ed11a5c63b5c079c6e60ce2fa32bbd8b1a
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Disable pcie port7 to prevent s0ix issue when run the FAFT sleep test.
BUG=b:335312655
TEST=Build and check S0ix function and verify FAFT sleep funciton.
Change-Id: I7918e26fe382d4d9992a0e2744a2f8894a070e36
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Adjust settings as recommended by thermal team.
Update DPTF parameters based on b:346930334
BUG=b:346930334
TEST= built bootleg and verified test result by thermal team
Change-Id: I363eaa72b5190212b014fe4e2c2fca10e2a3f408
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83079
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust settings as recommended by thermal team.
Update DPTF parameters based on b:346932306
BUG=b:346932306
TEST= built bootleg and verified test result by thermal team
Change-Id: I6a529365249a5372dd87ef28cb9ea8d540b9cac0
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83078
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I3d71a35e9c0a33b72720b093b5a05eb69d5bb9f8
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83060
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add initial override devicetree for riven based on
the latest schematic (Riven(ZDK)_MB_Proto_0601.pdf).
1. Add eMMC DLL tuning value (copy from craask)
2. Configure I2C frequency (copy from craask)
3. Add audio codec and speaker amp settings
4. Add Elan touchscreen settings (copy from craask)
5. Add WFC and usb settings (copy from craask)
6 Add Elan and Synaptics touchpad settings (copy from craask)
7. Add WIFI6(CNVI) and WIFI7(PCIE) configuration
8. Add LTE settings (copy from craask)
BUG=b:337169542
TEST=Local build successfully.
Change-Id: I1dda3557edb44dda9c3a1efaf98437352978561c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83059
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables ACPI brightness controls to be generated, and display
brightness controls to be functional under Windows.
TEST=build/boot Win11 on google/brya (craaskin), verify display
brightness controls present and functional.
Change-Id: I821b912cf52b5b89c5c9d831a5a15566b1b31639
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Configure GPIOs according to schematic_20240607.
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I760a7a234df43db3a557b3be9e20ff7aa5f80b72
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Turn off camera power during s0ix to improve power consumption.
BUG=None
BRANCH=brya
TEST=built and verified GPP_A17 went to low during s0ix with a scope.
[Measurement of s0ix power consumption - 1 hour avg]
Before this: 301.4 mW
After this: 299.8 mW
Change-Id: Iae02d06e9f5a5988563b2b7ae36d153aecedb9d7
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83029
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Pujjoga support EM060 WWAN, use wwan_power.asl to handle the
power off sequence.
BUG=b:346479638
TEST=Build and boot on pujjoga
Change-Id: I1273d09385c661835d741691b3c4af26e72a9f86
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83042
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, the P sensor does not work.
So add SX9324 registers settings based on tuning value from SEMTECH.
BUG=b:340749850
TEST=Check i2c register settings on Pujjoga and
confirm P sensor function can work by kernel 6.6 driver.
Change-Id: I205c1f5228d792afc763a06f74a8744918e2da75
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82689
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add AX211 wifi sar table for sundance wifi sar config.
Use fw_config to separate different wifi card settings.
WIFI_SAR_TABLE_AX211: 0
BUG=b:332978681
Test=emerge-nissa coreboot
Change-Id: Ide84996da567e4f866a2a1309a6976ed8df635a6
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83044
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
