summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte
AgeCommit message (Collapse)Author
2017-10-31AMD boards: Fix function name (soft_reset) in messageJonathan Neuschäfer
Change-Id: Ia21a3e93712bd6b6780fe7308c6cf79c553f4e1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-01intel/i440bx: Move LATE_CBMEM_INIT under mainboardKyösti Mälkki
Some of these will move to EARLY_CBMEM_INIT. Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2017-08-28mb/gigabyte/ga-b75m-d3*/acpi: Remove redundant codePatrick Rudolph
Remove obsolete code. The same settings are always done in southbridge. Change-Id: Ic893ddbace73ae8b122c4fb675febc7d1e0b5da9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-20mb/gigabyte/ga-b75m-d3v: add libgfxinit supportBill XIE
On this device libgfxinit successfully initializes textmode and framebuffer mode on the device connected to the HDMI1 port. VGA port is not tested, due to lack of VGA with valid EDID. Every ports works on GNU/Linux with kernel version 4.9+80+deb9u1. Due to limitations within the libgfxinit's current build system, it needs "select NORTHBRIDGE_INTEL_IVYBRIDGE" to work, even it is PCH instead of CPU for which libgfxinit should be configured here. Change-Id: Ib1513fc57b79eebc5d047c2e24585731c44bc215 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-15440BX boards: Use combined RAM init routineKeith Hui
Change all 440BX boards to use the combined RAM init routine added in commit 078e3240 (northbridge/intel/i440bx: Merge RAM init routines) [1]. [1] https://review.coreboot.org/20676 Change-Id: I699db882189f99018d4a6fdcb00f9438b2a7a1bc Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
All affected boards did the same USE_NATIVE_RAMINIT distinction or actually selected USE_NATIVE_RAMINIT. Also update autoport. Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20813 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-07-24Update files with no newline at the endMartin Roth
Change-Id: I8febb8d74e2463622cab0313c543ceebec71fdf4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-23440BX boards: Drop unused #includes from romstageKeith Hui
Romstage of many 440BX boards included headers that are not used. Remove them as part of a bigger cleanup effort. Change-Id: I89ddeda3c90e1a4907c05851185b69f3b29e54ba Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-14K8: Fix indirect includesKyösti Mälkki
Change-Id: I370285aa52776170a32b6dd36c0eef74eea9400c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-06mainboard/[g-l]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I1f906c8c465108017bc4d08534653233078ef32d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-09cpu/intel/model_206ax: Use tsc monotonic timerPatrick Rudolph
Switch from lapic to tsc. Allows timestamps to be used in coreboot, as there's a reference clock available to calculate correct time units. Clean Kconfig, remove duplicated lapic code and include tsc dir for LGA1155 boards. Tested on Lenovo T430. Change-Id: I849ca2b3908116d9d22907039cd6e4464444b1d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-21mb/*/romstage: Don't lock ETR3 CF9GR in early romstagePatrick Rudolph
Do not lock ETR3 CF9GR in early romstage. As of Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 this is done in bd82x6x's finalize handler. Change-Id: Iea091511f0d2a6128d3a19e9413090c85e4c2e57 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/gigabyte/ga-g41m-es2l: Enable IO decode range for LPT and FDDArthur Heymans
Change-Id: I77aabf98ea48c6e8bdbe322f89666935f59a289a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-20mb/gigabyte/ga-g41m-es2l: Add timestamps in romstageArthur Heymans
Change-Id: I93f43a0af41ae86f1b8ba33e28f3b9f060a5ab5e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-12mb/gigabyte/ga-g41m-es2l: Don't disable PATAArthur Heymans
This board features a PATA port. TESTED PATA drive works in SeaBIOS and OS. Change-Id: I74dc72c22e6c4fed07f28ef7d88adde54656ae39 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/x4x: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Currently only one board uses this northbridge in coreboot but some patches are pending to add more. Change-Id: If035e442d1a23674667f46a07b44c4f2b81be48c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/i945: Define and use a default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I15550b1cc1a7ccfecba68a46ab2acaee820575b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-09mb/gigabyte/ga-b75m-d3h: Add tpm support for its onboard tpm socketBill XIE
Tested against a lenovo-manufactured tpm 1.2 module: a /dev/tpm0 visible inside GNU/Linux, but there is no menu items in SeaBIOS' interface, which seems a common issue of SeaBIOS on ivb boards. Change-Id: Id0dee74d945bae5d77eb669d8b9d468a67aee508 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19521 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-04mb/gigabyte/ga-b75m-d3h: add libgfxinit supportpersmule
Currently native video init works on port HDMI1 (wired to the on-board DVI-D socket) , HDMI3 (the on-board HDMI port), and the VGA port, both text mode and fb mode. Every ports works on GNU/Linux. Tested against an IVB cpu (i7-3770T). Change-Id: If00a7247df0c32b3d1f489fb92d86baaa8fdf8ba Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01mb/*/mainboard.c: Get rid of SPI AFC registerPatrick Rudolph
The AFC—Additional Flash Control Register is set by southbridge code. Remove redundant calls and get rid of it in autoport. Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19493 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28sb/nvidia/mcp55: Link early_ctrl.cArthur Heymans
Change-Id: I3a55c2e8077fdb10768df287f38efcd5e2e64bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19365 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
This needs some extra headers in amdk8/raminit.c that were otherwise provided by that file. Change-Id: I80450e5eb32eb502b3d777c56790db90491fc995 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19360 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
For this debug.c needs to be linked too. Change-Id: I9cd1ffff2c39021693fe1d5d3f90ec5f70891f57 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19030 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-21southbridge/nvidia/mcp55: Get rid of #include early_smbus.cArthur Heymans
Using linker instead of '#include *.c'. Change-Id: I74dfa99c8bb3f4ca7ef3d774be2197897022f52c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18484 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-02-17nb/intel/x4x: Implement resume from S3 suspendArthur Heymans
It rewrites the results of receive enable stored in the upper nvram region, to avoid running receive enable again. Some debug info is also printed about the self-refresh registers. (Not enforcing a reset here, since 0 does not necessarily mean it's not in self-refresh). Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17998 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17nb/intel/x4x: Fix raminit on reset pathArthur Heymans
Previously the raminit failed on hot reset and to work around this issue it unconditionally did a cold reset. This has the following issues: * it's slow; * when the OS issues a hot reset some disk drives expect their 5V power supply to remain on, which gets cut off by a cold reset, causing data corruption. To fix this some steps in raminit must be ommited on the reset path. This includes receive enable calibration. To achieve this it stores receive enable results in RTC nvram for them to be rewritten on the resume path. Note: The same thing needs to be done on the S3 resume path. Calling a hot reset after raminit "outb(0x6, 0cf9)" works. Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18009 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-05mb/ga-m57sli-s4: Fix early uart outputArthur Heymans
The console output is garbled until it is fixed in ramstage by devicetree which sets the uart clock predivider correctly. Change-Id: I6d6ec0febfec98a8d4a71e1476036c804cf5f08d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17969 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2017-01-04intel/i945 boards: Add romstage time stampsPaul Menzel
Currently, some Intel 945 boards miss some or all of the time stamps *1:start of rom stage*, *2:before ram initialization*, and *3:after ram initialization*, so add them. Use the same formatting as used for the board Lenovo X60, which already has code for all the time stamps. Change-Id: Ie25747d02fadd74b7d7b7cab234a7a88b2cc0c42 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17993 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-03mb/ga-m57sli: Add cmos.defaultArthur Heymans
If the cmos checksum is incorrect it should fall back to sane defaults. Change-Id: If16cfc73effd4a825d0cefcd30bfd0e48b2d9132 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17968 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-15mb/ga-945gcm-s2l: Fix resume from suspendArthur Heymans
Checking for memory self refresh can generate false positives, as explained in faa6beb: "northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig option". This seems to be the case for this motherboard. TESTED on ga-945gcm-s2l. Change-Id: Iadf0a73b054470b652e1dc02557fb1715131f823 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17617 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11nb/intel/i945: Make pci_mmio_size a devicetree parameterArthur Heymans
Instead of hardcoding pci_mmio_size in the raminit code, this makes it a parameter in the devicetree. A safe minimum of 768M is also defined since using anything less causes problems (if 4G of ram is used). Change-Id: If004c861464162d5dbbc61836a3a205d1619dfd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16856 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17736 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
Change-Id: Ifeef04b68760522ce7f230a51f5df354e6da6607 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17734 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mb/gigabyte/ga-945gcm-s2c: Add mainboard using variantsArthur Heymans
This mainboard is identical to ga-945gcm-s2l except for NIC which is a Realtek RTL 8101E chip (10/100 Mbit). The schematics of ga-945gcm-s2l mention multiple NICs and ga-945gcm-s2c and ga-945gcm-s2l have a common manual further indicating that those boards are close to identical. Change-Id: Iba3d401efcf208154e639c3237b201830a5151aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17416 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28mb/gigabyte/ga-945gcm-s2l: Configure SuperIO ECArthur Heymans
Change-Id: Id7c2b656f500c14f39d4492667ea461b9ca353b0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO ECDamien Zammit
Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17602 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24mb/ga-945gcm-s2l: Enable EC I/O decode range.Arthur Heymans
Change-Id: I021aae6130c475cb370b891ffaec6f1ad267540b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17580 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22mb/gigabyte/ga-g41m-es2l: Add MAX_CPU = 4 in KconfigArthur Heymans
This motherboard support Intel core 2 quads. Before this change SeaBIOS was not usable, due to it crashing before it got to load anything. Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17537 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21mb/ga-g41m-es2l: Correctly configure PCI IRQ in ACPIArthur Heymans
Obtained from vendor bios DSDT, under "Device (HUB0), Name (_ADR, 0x001E0000)". The schematics also indicate that the INTA-D are hardwired to these PIRQ lines. Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17099 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
When MRC cache is available, first read only the SPD unique identifier bytes required to detect possible DIMM replacement. As this is 11 vs 256 bytes with slow SMBus operations, we save about 70ms for every installed DIMM on normal boot path. In the DIMM replacement case this adds some 10ms per installed DIMM as some SPD gets read twice, but we are on slow RAM training boot path anyways. Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-11-16mb/ga-945gcm-s2l: Clean up SuperioArthur Heymans
GPIO register at offset 0xfc (VID Input Register) is read-only but writing 1 to bit 0 will update initial VID input. Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17412 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-08mb/gigabyte/ga-945gcm-s2l: add mainboardArthur Heymans
Startpoint was Intel d945gclf, which has same chipset and Gigabyte ga-g41m-es2l which has same Superio. What works and is tested: * PCI slot; * PCIe x16 slot with GPU (RADEON HD 2600 XT) and ADD2 DVI card; * onboard VGA output (only textmode implemented) with native graphic init; * 533, 800, 1067MHz FSB CPU (1333MHz is unsupported by the chipset); * serial output during and after boot. What does not work: * resume from suspend (does not work for d945gclf either). Quirks: * The Realtek ethernet card requires a reset which currently also hardcodes a MAC adress. This board was only tested with the SeaBIOS payload due to flash size constraints (512KB) and with GNU/Linux. Change-Id: I0ff9f193105facc1b276a791790e27eb4c275085 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17033 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-10gigabyte/ga-g41m-es2l: add VESA mode to KconfigArthur Heymans
This patch adds MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG to the gigabyte/ga-g41m-es2l Kconfig to allow selecting between textmode and vesamode in menuconfig. Change-Id: I84b61118fa0419d49d2498b66029711cdce97576 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16501 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/*/*/*/usb.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Id46a0c4ca59dc7224c2eedd674ea3a5486509de1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16824 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/m57sli/romstage.c: Use tabs for indentsElyes HAOUAS
Change-Id: Ib439e5d96543790d17934bd477af62d39a5958b6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16815 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/ga-b75m-d3v: Use tabs for indentsElyes HAOUAS
Change-Id: I36011719f79da4a9ab2aaeb92ffb0506b4373143 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16816 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/ga-b75m-d3h: Use tabs for indentsElyes HAOUAS
Change-Id: I038e5cea654d1760ddb2c403c651d8f75e021251 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-29mainboard/gigabyte/ga_2761gxdk: Use tabs for indentsElyes HAOUAS
Change-Id: Ie752fe0a74acd4b79711596e56fc5ebf83884a0d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16779 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-26mainboard/*/*/dsdt.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Idef587d8261784e916e8d50f4336cbcfca39b9b0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/mptable.c: Improve code formattingElyes HAOUAS
Change-Id: I341293cd334d6d465636db7e81400230d61bc693 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16723 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/irq_tables.c: Use tabs for indentsElyes HAOUAS
Change-Id: Idc29373cb01f4304d22ae315812bd40f0aaa94c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16729 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-13mainboard/gigabyte/*: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/gigabyte/*. Change-Id: Ied62d6234a4f6ea5f851e98a098b2c8f4e3db144 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09mb/gigabyte/ga-g41m-es2l: Remove PCI disable on PEG bridgeDamien Zammit
Although the goal was to hide the ME device by disabling the PCI bridge, the original comment that this bridge was ME related was a mistake, this bridge is for PEG not for ME. We still need this PCI bridge "on" to enable pci express graphics add-on cards. Change-Id: Ibf322136097d77a8e7c05dcb14f72da938187a0a Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16496 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-07mb/gigabyte/ga-g41m-es2l: Add IRQs for PCI express graphics in ACPIDamien Zammit
With this patch and the previous ones in this set, PCI express graphics is now working. 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Change-Id: Ife691fb381e90e7744fe2ac4e20977be53419a14 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16497 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15mb/gigabyte/ga-b75m-d3v: Add missing board URLJonathan Neuschäfer
Change-Id: I990038c09f5805c8e670fd316808dde767e8671b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16159 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09gigbyte/ga-g41m-es2l: add cmos.layout and cmos.defaultArthur Heymans
This adds a cmos.layout and a cmos.default to ga-g41m-es2l. This allows to set things like baud_rate, debug_level, etc. from cmos. Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31gigabyte/ga_2761gxdk: Remove comment *endif*Paul Menzel
After the indentation is fixed in commit *mainboard: Format irq_tables.c* [1], the comment is redundant. So remove it. [1] Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Change-Id: Iebbcf10ee3cef1b4cf60ea34a6b3ad51e2208671 Reviewed-on: https://review.coreboot.org/15933 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-21intel/car/cache_as_ram_ht.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: Idb0f621553e76e771a5d6f2d492675ccd989d947 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15228 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21intel/car/cache_as_ram.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I02881ce465cb3835a6fa7c06b718aa42d0d327ec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31mb/gigabyte/ga-g41m-es2l: Update board_info.txt and add item to KconfigDamien Zammit
This adds the website URL to the board info and also enables the realtek nic reset function as per a previous patch. Change-Id: I2cda120c59b55f0dd2ffa78d397b16beb13d6843 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14954 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Use x4x_late_init()Damien Zammit
This patch adds DMI/EP init to the board and fixes a couple of minor things. Change-Id: I10d0f6ce747b60499680e4dc229b7fcbb16cc039 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14926 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Fix ACPI IRQ settings for SATADamien Zammit
Previously, due to a bug in devicetree and incorrect IRQ settings in ACPI, SATA controller would not initialize any HDDs in the OS, even though it worked in SeaBIOS. The devicetree setting is not needed because SATA must function in "plain" mode on this board, as "combined" mode does not work at all. Change-Id: I0036c4734de00b84cc3d64f38e4b1fd80fd1a25d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14776 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
Set MMCONF_BASE_ADDRESS to 0xf8000000. It was already done for some boards, but not all. The sandybridge chipset code assumes 64 pci buses behind MMCONF. Therefore, only 64MiB of physical address space is required. Increasing the address allows to use additional 128MiB of MMIO space and to use the Intel IGD and a PEG at the same time. Previously it wasn't possible to use both at the same time, as two 256MiB areas won't fit into MMIO space. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Onboard GPU Intel IvyBridge Desktop * PEG GPU AMD RV770 Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-03-10northbridge/intel/i440bx: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i440BX boards in the chipset. Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Fix HPBA shadowing.Vladimir Serbinenko
Store (HPBA, HPBA) had no effect. Rename one of HPBA to avoid shadowing. Change-Id: I54bfa7bcb3e05c28fe8a257825af56527dbf663e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13622 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove PMBASE settings and commented code.Damien Zammit
Fixed incorrect comment regarding port 80 LPC route. Change-Id: Ifbb73753d5a0737418b869085f2329a02504e5dc Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove copy-pasted cstatesDamien Zammit
Change-Id: I5b6edbd97d4e6ed8b03f2f319a338022647e26ea Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13465 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Move MMCONF base address to 0xe0000000Damien Zammit
Change-Id: I3873d92069cc1d113a8092d609d1768ff45cbd45 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13129 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-26ga-g41m-es2l: Instead of forcing native VGA, make it selectableMartin Roth
This allows the native VGA to be disabled for debug, or if someone wants to use the vbios. Change-Id: I59a94fa0d02bfe254c8a598e15d3d9d73ecfe650 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12848 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-01-22lib: compile mdelay for romstagePatrick Georgi
Mimicking change I7037308d2, always compile mdelay for romstage. The boards that #included delay.c in the romstage now rely on the linker instead, which is a desirable cleanup. Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-20Kconfig: Remove selects that enable 'choice' symbolsMartin Roth
Selecting Kconfig symbols that were created inside a 'choice' block have no effect. Remove these so people aren't confused by them. Change-Id: I7de9131d8d8afb65f86648afb9728f09cb67e122 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-30gigabyte/ga-g41m-es2l: Add mainboardDamien Zammit
Board uses x4x native raminit Board boots into Debian 8 with full graphics IRQ9: nobody cared, gets disabled (PIC needs IRQ settings?) VGA: - VGA native init works in grub with analog connector - Fails to boot with both channels of ram populated Change-Id: I7417813456817529b8cbaace45cefe47467d0a82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11306 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-10ACPI: Work around IASL warning reading/writing same registerMartin Roth
The newer versions of IASL are unhappy when an operator has the same object as both source and destination. The warning can be completely disabled with a command line argument, but in general, I'd really rather not just disable warnings. The bits in this register are write 1 to clear, so reading and writing the same register is what we want to do. Instead, store it in a temporary register then write it in a second operation. Fixes warning: dsdt.aml 1396: Store(PWST, PWST) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I52d73d4431db237be83016d67cd397f31b53d9c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24northbridge/amd/amdfam10: Rename mislabeled iommu nvram option to gartTimothy Pearson
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12046 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>