| Age | Commit message (Collapse) | Author |
|---|
|
Both southbridges need to be done at once since this southbridge code
is used for different northbridges, which fails to compile when done
separately.
This needs an acpi_name functions in the northbridge code to be
defined.
TESTED on Intel DG43GT: show correct PIRQ ACPI entries in
/sys/firmware/acpi/tables/SSDT.
Change-Id: I286d251ddf8fcae27dd07011a1cd62d8f4847683
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Obtained from vendor bios DSDT, under "Device (HUB0),
Name (_ADR, 0x001E0000)".
The schematics also indicate that the INTA-D are hardwired to these
PIRQ lines.
Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17099
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to: "Intel ® 4 Series Chipset Family datasheet"
the IGD only has 1 IRQ pin.
Change-Id: I974f002f5a213056f4593a1eab10772527bb241d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17098
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
With this patch and the previous ones in this set,
PCI express graphics is now working.
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218
[GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Change-Id: Ife691fb381e90e7744fe2ac4e20977be53419a14
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/16497
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Previously, due to a bug in devicetree and incorrect IRQ
settings in ACPI, SATA controller would not initialize
any HDDs in the OS, even though it worked in SeaBIOS.
The devicetree setting is not needed because SATA must
function in "plain" mode on this board, as "combined" mode
does not work at all.
Change-Id: I0036c4734de00b84cc3d64f38e4b1fd80fd1a25d
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/14776
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Board uses x4x native raminit
Board boots into Debian 8 with full graphics
IRQ9: nobody cared, gets disabled
(PIC needs IRQ settings?)
VGA:
- VGA native init works in grub with analog connector
- Fails to boot with both channels of ram populated
Change-Id: I7417813456817529b8cbaace45cefe47467d0a82
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11306
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
