coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2017-01-06	sb/ich7: Use common/gpio.h to set up GPIOs	Arthur Heymans
	This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-08	mb/gigabyte/ga-945gcm-s2l: add mainboard	Arthur Heymans
	Startpoint was Intel d945gclf, which has same chipset and Gigabyte ga-g41m-es2l which has same Superio. What works and is tested: * PCI slot; * PCIe x16 slot with GPU (RADEON HD 2600 XT) and ADD2 DVI card; * onboard VGA output (only textmode implemented) with native graphic init; * 533, 800, 1067MHz FSB CPU (1333MHz is unsupported by the chipset); * serial output during and after boot. What does not work: * resume from suspend (does not work for d945gclf either). Quirks: * The Realtek ethernet card requires a reset which currently also hardcodes a MAC adress. This board was only tested with the SeaBIOS payload due to flash size constraints (512KB) and with GNU/Linux. Change-Id: I0ff9f193105facc1b276a791790e27eb4c275085 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17033 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>