summaryrefslogtreecommitdiff
path: root/src/mainboard/emulation
AgeCommit message (Collapse)Author
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
This is a empty struct that has propagated through the superio's & ec's but really does nothing. Time to get rid of it before it adds yet more cruft. However, since this touches many superio's at once we do this in stages by first changing the function type to be a pure procedure. Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5617 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-02qemu-armv7: Kconfig cleanupKyösti Mälkki
RAMBASE, RAMTOP and XIP_ROM_SIZE are not used with ARCH_ARMV7. Change-Id: I072ed022e3279ed23716fdf78d0db8952b3fdb32 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5627 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
Rename coreboot_ram stage to ramstage. This is done in order to provide consistency with other stage names (bootblock, romstage) and to allow any Makefile rule generalization, required for patches to be submitted later. Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09uart: Redefine Kconfig optionsKyösti Mälkki
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-08qemu-i440fx: add a prototype for main()Patrick Georgi
This probably belongs elsewhere, but I haven't found a nice place yet. Change-Id: I9ca52db33905cf4ee229d7ff44012105915271a8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-04pl011 UART: Move under drivers/uartKyösti Mälkki
Currently this is only a minimal stub to get console on qemu-armv7. Change-Id: I3f20b7f944bc7d0e5ace9d22198d4c16a3839d2c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5162 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-03qemu: Support textmode gfx init.Vladimir Serbinenko
Change-Id: I8b6b14b4fcf8df21d8bbf988d640b1efa013bd7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5283 Tested-by: build bot (Jenkins) Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-01-22CBMEM: Replace cbmem_initialize() with cbmem_recovery()Kyösti Mälkki
The replacement function confirms CBMEM TOC is wiped clean on power cycles and resets. It also introduces compatibility interface to ease up transition to DYNAMIC_CBMEM. Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4668 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-01-22emulation/qemu-armv7: Fix wrong stack parameters.Vladimir Serbinenko
Now it boots up to message "Could not find payload". Change-Id: I07ddca7046492f7e0dec15a8ea00c2870b09ee67 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4754 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19boardstatus: Add category "emulation".Vladimir Serbinenko
Change-Id: If9d26b9e4cb1895452316c9cf2e8c75a01cfd7c2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4738 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-19board-status: Add board_info.txt manually for irregular wiki entriesVladimir Serbinenko
Based on info from wiki. Change-Id: Iebd799abe48550c4df55632b8177d845df7d9a7d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4706 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-20armv7: Remove SYS_TEXT_BASE config.Hung-Te Lin
SYS_TEXT_BASE is not used by any one. To prevent confusion when changing memory layout, remove it from current configurations. Change-Id: I15012b864bbb9c12003843b9b24ea64c91f4578b Reviewed-on: https://gerrit.chromium.org/gerrit/61853 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/4371 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-06qemu: fix GENERATE_ACPI_TABLES=n in fw_cfg.cGerd Hoffmann
Change-Id: Ib8dc069c9e503747c349e96a466feb42279afd08 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4305 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03qemu-armv7: Drop additional console_init()Stefan Reinauer
It's done in bootblock_simple.c just after returning from the mainboard specific bootblock function. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I96cab5e406132a9f7dc30d48ff99f524773a1a14 Reviewed-on: https://gerrit.chromium.org/gerrit/58473 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4257 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-25bochs: add support for native graphicsRonald G. Minnich
Per our discussions with Gerd, qemu will now always do native graphics on coreboot. The VGA BIOS capability is not needed and will no longer be supported. Attempts to build without native graphics will result in an error. This code builds for both x86 emulation targets. I'm hitting an issue testing that is unrelated to coreboot; if someone can test, that would be helpful. Be sure to start qemu with -vga std. We also add a test for the PCI BAR being zero and return silently if it is. Change-Id: I66188f61e1bac7ad93c989cc10f3e0b55140e148 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/4258 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-18qemu: set smbios entries from fw_cfgGerd Hoffmann
Qemu makes the guest uuid (qemu -uuid $uuid) available to the guest via fw_cfg. Other smbios fields can be configured in qemu using the -smbios command line switch (check the qemu manpage for details). This patch adds coreboot support for this, so the values provided by qemu will actually show up in the smbios table. Change-Id: Ifd9ae0d02749af4e7070a65eadbd1a9585a8a8e6 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-15qemu: load acpi tables from fw_cfg.Gerd Hoffmann
Starting with release 1.7 qemu provides acpi tables via fw_cfg. Main advantage is that new (virtual) hardware which needs acpi support JustWorks[tm] without having to patch & update the firmware (seabios, coreboot, ...) accordingly. So if we find acpi tables in fw_cfg try loading them, otherwise fallback to the builtin acpi tables. Change-Id: I792232829b870ff6ed8414a3007e0af17f6c4223 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4040 Tested-by: build bot (Jenkins)
2013-11-11qemu: load e820 from fw_cfgGerd Hoffmann
qemu 1.7+ provides a fw_cfg file named "etc/e820" with e820-like entries for reservations and ram regions. Use it for ram detection if present, otherwise fallback to the traditional cmos method. Change-Id: Icac6c99d2a053e59dfdd28e48d1ceb3d56a61bdc Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4030 Tested-by: build bot (Jenkins)
2013-11-11qemu: add fw_cfg files supportGerd Hoffmann
Qemu can provide files using the firmware config interface. This is used to pass config options, virtual machine config info and option roms into the guest. This patch adds support for reading the file index and loading files from qemu. Change-Id: I57d4a734527c4117239f355121cf1fb8a390ab0d Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4029 Tested-by: build bot (Jenkins)
2013-10-15CBMEM: Define cbmem_top() just once for x86Kyösti Mälkki
It is expected this will always be a casted get_top_of_ram() call on x86, no reason to do that under chipset. Change-Id: I3a49abe13ca44bf4ca1e26d1b3baf954bc5a29b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3972 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-18qemu: q35: fix pci bar placementGerd Hoffmann
Without this coreboot may (depends on the amount of memory) place the pci bars below 0xb0000000, then the linux kernel goes move them around so they are inside the window declared in the acpi tables. This breaks vesafb as the vga framebuffer gets moved after vgabios initialization. It's also not exactly nice to expect the OS fix our mess ;) Change-Id: If6b50ea863958eea71b567ccb7a06c6a28076111 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3927 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-09-11CBMEM x86: Unify get_cbmem_toc()Kyösti Mälkki
Remove any chipset-specific implementations and use arch-specific implementation of get_cbmem_table() instead. Change-Id: I338ee2c1bd51f5e517462115170dc926e040159e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3907 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Unify get_top_of_ram()Kyösti Mälkki
Change-Id: Ic40a51638873642f33c74d80ac41cf082b2fb177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3904 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM northbridges: Remove references to global high_tables_baseKyösti Mälkki
Use the new helper function set_top_of_ram() to remove remaining uses of high_tables_base and _size under northbridge/. Change-Id: I6b0d9615002ed2aff578c5811d7bd43dd2594453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3561 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-16emulation/qemu-i440fx: style cleanupPatrick Georgi
Drop unused and commented out variable, and fix a comment while at it. Change-Id: I1bd7d10aca949c8579433ea1c91264fd816a3fb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/3873 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15qemu: fix ioapic reservationGerd Hoffmann
The slightly hackish ioapic ressource reservation is needed for i440fx emulation only, for q35 the ich9 southbridge driver handles this just fine. [ Side note: The i440fx chipset emulated by qemu is pimped up with alot of stuff which never existed on real hardware, which leads to tweaks like this one. ] Change-Id: I06bf54cbc247ccf17aa9063fb7dee9def323c605 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3850 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15qemu: reserve portsGerd Hoffmann
QEMU has a bunch of non-standard virtual devices on various I/O ports. Allocate resources for them so the coreboot resource management knows those ports are used. Change-Id: I51a85967cf2dcd634b0c883210bb52c0c34c8283 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-26emulation/qemu-q35: Use MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Change all PCI configuration accesses to MMIO in qemu-q35 emulation To enable MMIO style access, add (move) explicit PCI IO config write in the bootblock. As there is no northbridge/x/x/bootblock.c file, a mainboard/x/x/bootblock.c file is added for this purpose. Change-Id: I979efb3d9b2f359a9ccbd1b4f6c05f83bab43007 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3599 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11Set PCI bus operations at buildtime for ramstageKyösti Mälkki
PCI bus operations are static through the ramstage, and should be initialized from the very beginning. For all the replaced instances, there is no MMCONF_SUPPORT nor MMCONF_SUPPORT_DEFAULT selected for the northbridge, so these continue to use PCI IO config access. Change-Id: I658abd4a02aa70ad4c9273568eb5560c6e572fb1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Simplify early / bootblock console codeStefan Reinauer
Change-Id: I6b28bb95c7decbe3eed33b5b5a029bee48bbe403 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Separate the early console (romstage) from the bootblock console.Gabe Black
It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7: Reserve space BL1 and checksum header by specifying bootblock offset.Hung-Te Lin
Not all ARM systems need "BL1", and the layout of BL* and bootblock may be different (ex, Exynos 5250 may use a new BL1 with variable length checksum header). To support that better, define the real base address (and ROM offset) of boot block, and then we can post-processing ROM image file by filling data / checksum and any other information. Change-Id: I0e3105e52500b6b457371ad33a9aa546acf28928 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3664 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 codeStefan Reinauer
When starting the Exynos5250 port, a lot of unneeded u-boot code was imported. This is an attempt to get rid of a lot of unneeded code before the port is used as a basis for further ARM ports. There is a lot more that can be done, including cleaning up the 5250's Kconfig file. Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3642 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: normalize ramstage code flowStefan Reinauer
In ram stage, all code flow should be tied to the resource allocator. Stuff that has to happen before everything else goes into the mainboard enable function in mainboard.c. This patch empties the main() wrapper around hardwaremain.c, allowing to get rid of this special case in the ARM port. Change-Id: Ide91a23f1043b64acf64471f180a2297f0f40d97 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-22qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM.Denis 'GNUtoo' Carikli
This commit was tested on qemu with and without CONFIG_DYNAMIC_CBMEM by running cmbmem -c once booted. The qemu command that was used was: qemu-system-i386 -bios ./build/coreboot.rom -serial stdio -hda ../virt/parabola.img Note that using CONFIG_RELOCATABLE_RAMSTAGE make it fails like that: Loading image. CBFS: Decompressing stage fallback/coreboot_ram @ 0x3ffbefc0 (184400 bytes) Loading module at 3ffbf000 with entry 3ffbf000. filesize: 0x18db8 memsize: 0x2c050 Processing 1703 relocs with adjust value of 0x3ffbe000 FATAL: Essential component is missing. However without CONFIG_RELOCATABLE_RAMSTAGE set it boots fine. Change-Id: I633a8c3832eee4e8bed244940fdc370b98dd26f0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3504 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-19qemu: complete bochs dispi interface vga driver.Gerd Hoffmann
Ditch unused fb*.h files. Rename init.c (name is _way_ to generic) to bochs.c. Add proper bochs dispi interface detection and mode setup. Hook up coreboot framebuffer table initialization. Change-Id: I7154b1593902e7d42606b64819217872eee10683 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3500 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18qemu/q35: uncomment cache-as-ram Kconfig entriesGerd Hoffmann
Change-Id: I8371764e3f2d16a3a776beb1c064f461b20a4262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3496 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: i440fx whitespace fixupGerd Hoffmann
Change-Id: I0d499027ffb175638cba0a9830d6ec2041a139db Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3488 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add q35 supportGerd Hoffmann
Add support for the new q35 chipset emulation added in qemu 1.4. Change-Id: Iabfaa1310dc7b54c9d224635addebdfafe1fbfaf Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3430 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add support for memory above 4GGerd Hoffmann
Change-Id: Ic83f55d01b29b43028e3b363749d64b927db5489 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3492 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: move ram ressource reservation from "set" to "read" stageGerd Hoffmann
So the pci allocation code knows where memory is and doesn't try map pci devices there. We also don't have to check for overlaps between pci hole and memory then. Change-Id: I5eaea0e4d21210719685860fa1f16ca7b2137cde Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3491 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-14qemu: move i440fx bitsGerd Hoffmann
Prepare tree for adding q35 support: Move emulation/qemu-x86 to emulation/qemu-i440fx. Rename some stuff to include 'i440fx'. Change-Id: Ib8c58175c5734cfcda1b22404ef52c09d38f0462 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3429 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-06qemu: copy dsdt tables from SeaBIOS, adapt for coreboot and enable acpiGerd Hoffmann
First copy over from SeaBIOS git repo, then adapt for coreboot: Disable cpu/pci hotplug bits. Disable dynamic pci window. Both depend on stuff in the SSDT tables created by SeaBIOS. Bits are left in, but deactivated via #if 0, so it's easier to see the differences when diffing the coreboot tables with the SeaBIOS tables. Adapt dsdt DefinitionBlock. Enable acpi table generation in acpi_tables.c. With this patch linux boots successfully with ACPI enabled. It's not bug-free though. Missing cpu detection leads to funky messages like this one: weird, boot CPU (#0) not listed by the BIOS. and SMP most likely wouldn't work either. Change-Id: Ic3803a6f1ef6d54c11cc4ca3844d3032a374ae6b Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3342 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-06qemu: wind up new cpu chipGerd Hoffmann
Add boot cpu to the device tree. Figure the number of CPUs installed (using the qemu firmware config interface) and add cpu devices for them, so they show up in all generated BIOS tables correctly. This gets SMP going. Change-Id: I0e99f98942d8ca90150b27fc13c1c7e926a1a644 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05qemu: add power management function to device treeGerd Hoffmann
Needed to make 'register "gpo" = ...' work. While being at it add comments saying which device is which. Change-Id: I911d5e4a7b6c7abf4ad73e863ab201e9e55ee0d4 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3346 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05qemu: Initial support for the qemu firmware config interface.Gerd Hoffmann
qemu has a special device to pass configuration information from qemu to the firmware. This patch adds initial support the interface, namely some infrastructure, detection code and a function to query the number of CPUs. Change-Id: I43ff5f4fbf12334a91422aa38f514a82a1d5219e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05qemu: fix IRQ routing setupGerd Hoffmann
Do the setup for all PCI slots, not only the third. Also remove the bogus message, as slot 3 may carry any device, not only NICs. This makes IRQ setup simliar to SeaBIOS. SeaBIOS assignments (with patch for logging added, and a bunch of pci devices for testing purposes): PCI IRQ [piix]: bdf=00:01.3 pin=1 line=10 PCI IRQ [piix]: bdf=00:03.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:04.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:05.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:06.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.1 pin=2 line=10 PCI IRQ [piix]: bdf=00:1d.2 pin=3 line=11 PCI IRQ [piix]: bdf=00:1d.7 pin=4 line=11 Coreboot assignments without this patch: Assigning IRQ 11 to 0:3.0 Coreboot assignments with this patch: Assigning IRQ 10 to 0:1.3 Assigning IRQ 11 to 0:3.0 Assigning IRQ 11 to 0:4.0 Assigning IRQ 10 to 0:5.0 Assigning IRQ 10 to 0:6.0 Assigning IRQ 10 to 0:1d.0 Assigning IRQ 10 to 0:1d.1 Assigning IRQ 11 to 0:1d.2 Assigning IRQ 11 to 0:1d.7 Change-Id: Ie96be39185f2f1cbde3c9fc50e29faff59c28493 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-05-29qemu: remove vga hookGerd Hoffmann
Extra care for the qemu vga should not be needed any more. Since release 0.12 qemu loads the vgabios into the PCI ROM bar, so everything works exactly like it does on real hardware. Change-Id: I4b9bf1244cad437cbe5168600aeee52031456033 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-28CBMEM: always initialize early if the board supports itStefan Reinauer
This allows to drop some special cases in romstage.c Change-Id: I53fdfcd1bb6ec21a5280afa07a40e3f0cba11c5d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2551 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop SRC_ROOT from mainboard Makefile.incsStefan Reinauer
It's not used, and not needed. Change-Id: Ifca92f3606ac58fc26e09676488c3add5d84ae79 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2548 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-25QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable`Paul Menzel
Similar to the discussion on the coreboot list [1] Am Freitag, den 22.02.2013, 02:17 +0100 schrieb Peter Stuge: […] > Function names should try to be descriptive. "enable_dev" is not very > descriptive. I like "mainboard_enable" because it makes output such > as > > printk("%s: foo", __func__); > > useful. rename the function for the northbridge to `northbridge_enable`. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074549.html Change-Id: I262311ec511e394550330214621b8c37780c1d4e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21ARMV7: create a correct LB_SERIAL table entryRonald G. Minnich
If CONFIG_CONSOLE_SERIAL is set, and we can call the standard function and get a non-zero uart address, then we create an lb table entry. The code was mostly right, just needed a tweak. Change-Id: I5b36c7b4e580a23319b7ba92cc8ad61592b1757a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2466 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-12armv7: Add emulation/qemu-armv7 board.Hung-Te Lin
To simplify testing ARM implementation, we need a QEMU configuration for ARM. The qemu-armv7 provides serial output, CBFS simulation, and full boot path (bootblock, romstage, ramstage) to verify the boot loader functionality. To run with QEMU: export QEMU_AUDIO_DRV=none qemu-system-arm -M vexpress-a9 -m 1024M -nographic -kernel build/coreboot.rom Verified to boot until ramstage loaded successfully by QEMU v1.0.50. Change-Id: I1f23ffaf408199811a0756236821c7e0f2a85004 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2354 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
Except for one board, the flags can be derived from CONFIG_MMX and CONFIG_SSE. Change-Id: I64a11135ee7ce8676f3422b2377069a3fa78e24d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2336 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-08qemu-x86: Implement more featuresStefan Reinauer
This patch switches the Qemu target to use (pseudo) Cache As RAM and enables some ACPI code. This allows to use the CBMEM console and timestamp code with coreboot in Qemu. Right now, the ACPI code is commented out because leaving it in breaks IDE. Change-Id: Ie20f3ecc194004f354ae3437b9cf9175382cadf8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2113 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-29Drop empty mainboard_opsKyösti Mälkki
Change-Id: I24866142eebcb8fdbc7e21f5b2f364a8d1b264b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1932 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-03Fix mainboard level enable_dev()Kyösti Mälkki
Commit 188e3c2ff06a82f61d7d71e610b32b1a250c0a45 dropped mainboard out of the static device tree. This left dev_root->chip_ops unset, and mainboard_ops.enable_dev() was no longer called. Change-Id: I6d447c8049a66041b8bb36ec9aac3e7e0d20a99b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1374 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-26Add automatic SMBIOS table generationSven Schnelle
Change-Id: I0ae16dda8969638a8f70fe1d2e29e992aef3a834 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/152 Tested-by: build bot (Jenkins)
2011-06-04WARNINGS_ARE_ERRORS is y per default, don't set it twice.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ↵Stefan Reinauer
See discussion at http://www.mail-archive.com/coreboot@coreboot.org/msg29394.html config->com1, devicetree.cb cleanup and init_uart8250() removal will follow once this patch is comitted Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Updated to drop com1, com2.... from config structure and devicetree.cb git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6521 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13We hardcode highmemory size in every northbridge! This is bad, and ↵Rudolf Marek
especially if suspend to ram is involved. Let the default be taken from cbmem.h which also handles the suspend logic. Abuild tested. Please check all changes if I did not make any wrong while converting this to bytes. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-11Factor out a few commonly duplicated functions from northbridge.c.Uwe Hermann
The following functions are moved to devices/device_util.c: - ram_resource() - tolm_test() - find_pci_tolm() There are only two tolm_test() / find_pci_tolm() which differ from the defaults, one of them can easily be eliminated in a follow-up patch, maybe even both, but for now keep it simple and only eliminate the majority. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-06Instead of requiring users to modify qemu to allow writes toKevin O'Connor
0xc0000-0xfffff, have coreboot qemu support enable the memory range at startup. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-17Always enable parent resources before child resources.Myles Watson
Always initialize parents before children. Move s2881 code into a driver. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09Same conversion as with resources from static arrays to lists, exceptMyles Watson
there is no free list. Converting resource arrays to lists reduced the size of each device struct from 1092 to 228 bytes. Converting link arrays to lists reduced the size of each device struct from 228 to 68 bytes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
it centrally in console/console.h instead. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1