summaryrefslogtreecommitdiff
path: root/src/mainboard/emulation/qemu-q35/Kconfig
AgeCommit message (Collapse)Author
2024-08-06mb/qemu-{i440fx,q35}/rom_media.c: add code for writable flashKrystian Hebel
Depending on how firmware image was passed to QEMU, it may behave as: - ROM - memory mapped reads, writes are ignored (FW image mounted with '-bios'); - RAM - memory mapped reads and writes (FW image mounted with e.g. '-device loader'); - flash - memory mapped reads, write and erase possible through commands. Contrary to physical flash devices erase is not required before writing, but it also doesn't hurt. Flash may be split into read-only and read-write parts, like OVMF_CODE.fd and OVMF_VARS.fd. Combined size of system firmware must not exceed 8 MiB by default (FW image(s) mounted with '-drive if=pflash'). This function detects which of the above applies and fills region_device_ops accordingly. Tested by starting QEMU with firmware passed as '-drive if=pflash', '-drive if=pflash,readonly=on' and '-bios'. When started with firmware passed through '-device loader', coreboot complains about corrupted FMAP, but this is the same behavior as without this change: [ERROR] Invalid FMAP at 0x40000 [EMERG] Cannot locate primary CBFS Writable pflash support was added about 17 years ago, so it should be supported by all QEMU versions currently in use. Since QEMU 5.0.0 it is possible to change the limit of firmware size with `max-fw-size` machine configuration option, up to 16 MiB, as bigger sizes would overlap with default IO APIC memory range. Change-Id: I3ab9f22c6165064a769881d4be5eab13a0a2f519 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82555 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
2024-03-28cpu/x86: Link page tables in stage if possibleArthur Heymans
When switching back and forth between 32 to 64 bit mode, for example to call a 32-bits FSP or to call the payload, new page tables in the respective stage will be linked. The advantages of this approach are: - No need to determine a good place for page tables in CBFS that does not overlap. - Works with non memory mapped flash (however all coreboot targets currently do support this) - If later stages can use their own page tables which fits better with the vboot RO/RW flow A disadvantage is that it increases the stage size. This could be improved upon by using 1G pages and generating the pages at runtime. Note: qemu cannot have the page tables in the RO boot medium and needs to relocate them at runtime. This is why keeping the existing code with page tables in CBFS is done for now. TEST: Booted to payload on google/vilbox and qemu/q35 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-18mb/cavium to mb/foxcomm: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ib100a677935cf3309a380952c35e9060e64433cb Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-28mb/emulation: Enhance ROM_SIZEMaximilian Brune
Some payloads tend to need bigger space than what our current defaults allow. Linuxboot is a good example. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I7029ca3360d936b67ff9873fa13cf9cc60445e56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-26sb/intel: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
i82801gx, i82801ix, i82801jx: Maintain IRQ #0 to GSI #2 override as positive edge trigger. ibexpeak, emulation/qemu-q35: Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: Ia8a04daf3a79d9f2f4801dc85e4975278e30dc8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-23emulation/qemu-i440fx,q35: avoid writing to ROMJulian Stecklina
libcbfs has a workaround to avoid writing to ROM areas: /* Hacky way to not load programs over read only media. The stages * that would hit this path initialize themselves. */ if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) && !CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) { This workaround is not triggered in QEMU, because BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This results in confusing (to the VMM developer) writes to read-only memory. As far as I can tell, this issue is weird but harmless, because the code does memcpy to ROM with source == destination. The concensus in the mailing list thread [1] was that it's worthwhile to be fixed regardless. [1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/ Change-Id: I5cefbc31f917021236105f7dc969118d612ac399 Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-09emulation/qemu-i440fx,q35: Split chromeos.cKyösti Mälkki
This drops VBOOT_NO_BOARD_SUPPORT. There is little impact of always having recovery_mode_switch() implemented in bootmode.c. A weak write_protect_state() is not necessary as there is no BOOT_DEVICE_SPI_FLASH with the emulation. Call to fill_lb_gpios() is already guarded with CONFIG(CHROMEOS) so the weak implementation would not be referenced. Change-Id: I3c00b30c5233ae3556b7622f97c3166668c8ab12 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16arch/x86/ioapic: Drop irq_on_fsb as a configurable itemKyösti Mälkki
APIC Serial Bus pins were removed with ICH5 already, so a choice 'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG 0x3 is also not documented since ICH5. For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was wrong and ignored as BOOT_CONFIG register emulation was never implemented. For ICH4 and earlier, the choice to use FSB can be made based on the installed CPU model but this is now just hardwired to match P4 CPUs of aopen/dxplplusu. For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined and the only possible operation mode there is APIC Serial Bus, which requires no configuration. Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06emulation/qemu-x86: Select BOOT_DEVICE_NOT_SPI_FLASHArthur Heymans
SPI flash is not emulated on these boards. Change-Id: If29a87441cb26e53c9814ed10ddcfe14752c3965 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52791 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05nb/intel: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. Change-Id: Ic92ecf8068f327a893d20924685ce571752d379f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52787 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31mb/emulation/qemu-q35: Use common MADTAngel Pons
Select SOUTHBRIDGE_INTEL_COMMON_ACPI_MADT and drop the `acpi_fill_madt` function definition, which is redundant. Tested, still boots to payload. Change-Id: I6ba448f264a478e7ef060ea1dfbf5016a310d528 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-31mb/emulation/qemu-q35: Define and use MMCONF_BUS_NUMBERAngel Pons
Also refactor the machine type checks to avoid code duplication. Tested, still boots to payload with 256, 128 and 64 busses. Change-Id: Ib394ba605bbfeee75aa645e989c23034cceff348 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50025 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-29device/Kconfig: Declare MMCONF symbols' type onceAngel Pons
Only specify the type of MMCONF_BASE_ADDRESS and MMCONF_BUS_NUMBER once. Change-Id: Iacd2ed0dae5f1fb6b309124da53b3fa0eef32693 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-28arch/x86: Remove most C_ENV_BOOTBLOCK_SIZE limitsKyösti Mälkki
With top-aligned bootblock this is no longer globally needed. The default maximum is now a generous 256 KiB with couple platforms having lower limits of 32 KiB and 64 KiB. Change-Id: Ib1aee44908c0dcbc17978d3ee53bd05a6200410c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-11mb/emulation/qemu: Copy page tables to DRAM in assemblyPatrick Rudolph
To work around various bugs running KVM enabled, copy page tables to DRAM in assembly before jumping to x86_64 mode. Tested on QEMU using KVM, no more stange bugs happen: Tested on host - CPU Intel(R) Core(TM) i7-7700HQ - Linux 5.9 - qemu 4.2.1 Used to crash on emulating MMX instructions and failed to translate some addresses using the virtual MMU when running in long mode. Tested on host - CPU AMD EPYC 7401P 24-Core Processor - Linux 5.4 - qemu 4.2.1 Used to crash on jumping to long mode. Change-Id: Ic0bdd2bef7197edd2e7488a8efdeba7eb4ab0dd4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-04-18mb/qemu-q35: Select `HAVE_CMOS_DEFAULT`Nico Huber
Change-Id: If4c4dc9467154a18168550538fc8e655636e87a0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-31mb/emulation/qemu-q35: Enable CHROMEOS as an optionDuncan Laurie
Allow Chrome OS to be enabled for this QEMU target. By default this does not change anything unless it is selected in the build configuration, but it makes it possible. Native VGA init is not forced when Chrome OS is enabled because the drm-bochs driver does not work with chrome (even the latest upstream kernel driver with drm atomic support) but it does work with virtio. The coreboot graphics init needs to match what is selected with qemu (with -vga std or -vga virtio) which in turn will determine which kernel driver is used. A second FMAP is added with both RW-A and RW-B regions which is required by chromeos. Recovery mode can be entered by supplying a custom fw_cfg option when launching qemu: -fw_cfg name=opt/cros/recovery,string=1 Change-Id: I24b4532ea961e68558663292c99d121f0a30ce3b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-31mb/emulation/qemu-q35: Enable option for TPMDuncan Laurie
This enables the mainboard to use a TPM if it is selected in the configuration. By default this does nothing, but it allows the TPM to be enabled and used with the CONFIG_USER_TPM2 Kconfig option. Using a TPM with QEMU requires either a physical TPM backend or the swtpm package with a socket: -chardev socket,id=swtpm,path=/tmp/swtpm/socket -tpmdev emulator,id=tpm0,chardev=swtpm -device tpm-tis,tpmdev=tpm0 Change-Id: I0d79a5a0f590c57998ababb660b52d9e3ed2d484 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-31mb/emulation/qemu-q35: Increase max size of ACPI tablesDuncan Laurie
When the TPM is enabled in QEMU the fw_cfg interface will return ~200KiB of ACPI tables, so this needs to be increased from the default in order to be able to boot. This is seen when using a TPM with qemu as it will hang when processing the fw_cfg tables. qemu-system-x86_64 \ -machine q35 -enable-kvm -vga virtio -serial stdio \ -drive 'id=hd,file=disk.bin' -bios coreboot.rom \ -chardev 'socket,id=swtpm,path=/tmp/swtpm/swtpm-sock' \ -tpmdev 'emulator,id=tpm0,chardev=swtpm' \ -device 'tpm-tis,tpmdev=tpm0' Change-Id: I21980aace8e86e636f5ae7b55148f4c31404edba Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-17mb/emulation/qemu-q35: Drop unused romcc-related KconfigArthur Heymans
Change-Id: Ib4adbd3f6e850ced1cb93e47ce4f45249dc032c5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-12mb/*: Fix default fmap with VBOOT_SLOTS_RW_A enabledPatrick Rudolph
Don't select the VBOOT fmap as default if VBOOT is disabled. Fixes a regression introduced by f8251b98 "mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings wouldn't allow the qemu boards to run. Also fix the Supermicro x11-lga1151 series boards. Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/emulation/qemu: Add VBOOT supportPatrick Rudolph
Add VBOOT support for testing purposes. Add a 16 MiB FMAP containing RO + RW_A. Tested on qemu. Change-Id: I4039d77de44ade68c7bc1f8b4b0aa21387c50f8a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-11arch/x86: Flip option NO_CAR_GLOBAL_MIGRATIONKyösti Mälkki
It is easier to track CAR_GLOBAL_MIGRATION which is the approach to be deprecated with the next release. This change enforces new policy; POSTCAR_STAGE=y is not allowed together with CAR_GLOBAL_MIGRATION=y. Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-11arch/x86: Enable POSTCAR_CONSOLE by defaultKyösti Mälkki
Almost all platforms force it on. Make it enabled by default but under user control to optionally disable it. Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-05mb/qemu-{i440fx,q35}: Use POSTCAR stage to load the ramstageArthur Heymans
Qemu does not have a real CAR but postcar stage is still useful for testing the stage. The postcar stage is also mandatory for x86_64 to setup pagetables for x86_64 ramstage. Do not set up MTRRs, as qemu ignores them anyways. Tested on qemu-i440fx and qemu-q35. Change-Id: I6638534d99fde312e55b6a6be8c95e4cb25cca80 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
Invert the default instead of selecting it everywhere. Restores the ability to use its Kconfig prompt. Beside Qemu targets, the only platforms that didn't select it seem to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The latter two were about to be patched anyway. Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30891 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22emulation/qemu-{i440fx,q35}: Don't migrate globalsArthur Heymans
Migration of globals is not needed as there is no real CAR that gets torn down. Change-Id: Id24642b49fab811e59291747eda8632cd49d83d0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28mb/*/*/Kconfig: Remove useless commentElyes HAOUAS
Change-Id: Ibdff50761a205d936b0ebe067f418be0a2051798 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hellsenberg <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Guckian Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-14mb/emulation/qemu-i440fx|q35: Fix stack sizePatrick Rudolph
Current implementation works by luck as DCACHE area is actually RAM and stack can grow and use that RAM outside of the area. * Set DCACHE_BSP_STACK_SIZE to 0x4000. * Add an assert to make sure it is set to a sane value on all platforms. Change-Id: I71f9d74d89e4129cdc4a850acc4fc1ac90e5f628 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29611 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12mb/emulation/qemu-i440fx|q35: Switch to C_ENVIRONMENT_BOOTBLOCKPatrick Rudolph
Useful for testing stuff in C_ENVIRONMENT_BOOTBLOCK, like VBOOT with separate verstage. Changes: * Use symbols to set up CAR and STACK * Zero CAR area * Move BIST failure checking to cpu folder * Rename functions where necessary Tested: * qemu-2.11.2 machine pc * qemu-2.11.2 machine q35 Test result: * BIST error reporting is still working. * Console starts in bootblock * SeaBios 1.11.2 as payload is still working Change-Id: Ibf341002c36d868b9b44c8b37381fa78ae5c4381 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-13src/*/intel/: clarify Kconfig options regarding IFDStefan Tauner
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid Inter Flash Descriptor to exist. It does *not* identify platforms or boards that are capable of running in descriptor mode if it's valid. Refine the help text to make this clear. Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply declare that IFD is supported by the platform. Select this value everywhere instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected. Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to the mainboard directory. Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-15mb/emulation/qemu-q35: Enable user option table supportPaul Menzel
It’s unclear why this option was commented out. Activate the line, and copy the CMOS layout and defaults from qemu-i440fx. TEST=Boot 2.11.1(Debian 1:2.11+dfsg-1ubuntu7) and see that nvramcui works. A changed value doesn’t survive a reboot though. Change-Id: Ieef86f092d323c68a6d2d0cc6c04c395f743a935 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/26265 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
MAINBOARD_FORCE_NATIVE_VGA_INIT is to be selected instead of the user option MAINBOARD_DO_NATIVE_VGA_INIT. The distinction is necessary to use the latter in a choice. Change-Id: I689aa5cadea9e1091180fd38b1dc093c6938d69c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18emulation/qemu-q35: Increase default ROM_SIZEKyösti Mälkki
Larger size fits GRUB payload and fixes case to build 82801ix with HAVE_INTEL_FIRMWARE. Change-Id: I90e33fb3a0b0e1a60dcc2a9a022bef034f3270d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17830 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-23drop unneeded IRQ_SLOT_COUNTsStefan Reinauer
This is only needed on boards that still provide old style PIRQ tables. Change-Id: Ie299de2937e5b91b7b3e1d1110e40be23c6d9f52 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10508 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-07-30Kconfig: Fix comments on endif to match the corresponding ifDaniele Forsi
Change-Id: I5c40de41a01d9c558f6c2795e19e643009804e70 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6397 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-05Drop redundant select CACHE_AS_RAMKyösti Mälkki
The few remaining boards without CAR override this with select ROMCC. Change-Id: Ifd5223e67f6a2dadb47846bdaab40b1be763cf69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6172 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25emulation/qemu: Switch x86 to DYNAMIC_CBMEMKyösti Mälkki
Change-Id: I00055064003c814b86fd1400d50bfd02fdfdf475 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6035 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-18emulation/x86 : Drop HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume detection not implemented in romstage.c. Change-Id: I98277cb483825af2e6c5c8eefa4598b117613478 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6028 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-03qemu: Support textmode gfx init.Vladimir Serbinenko
Change-Id: I8b6b14b4fcf8df21d8bbf988d640b1efa013bd7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5283 Tested-by: build bot (Jenkins) Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-25bochs: add support for native graphicsRonald G. Minnich
Per our discussions with Gerd, qemu will now always do native graphics on coreboot. The VGA BIOS capability is not needed and will no longer be supported. Attempts to build without native graphics will result in an error. This code builds for both x86 emulation targets. I'm hitting an issue testing that is unrelated to coreboot; if someone can test, that would be helpful. Be sure to start qemu with -vga std. We also add a test for the PCI BAR being zero and return silently if it is. Change-Id: I66188f61e1bac7ad93c989cc10f3e0b55140e148 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/4258 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-26emulation/qemu-q35: Use MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Change all PCI configuration accesses to MMIO in qemu-q35 emulation To enable MMIO style access, add (move) explicit PCI IO config write in the bootblock. As there is no northbridge/x/x/bootblock.c file, a mainboard/x/x/bootblock.c file is added for this purpose. Change-Id: I979efb3d9b2f359a9ccbd1b4f6c05f83bab43007 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3599 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19qemu: complete bochs dispi interface vga driver.Gerd Hoffmann
Ditch unused fb*.h files. Rename init.c (name is _way_ to generic) to bochs.c. Add proper bochs dispi interface detection and mode setup. Hook up coreboot framebuffer table initialization. Change-Id: I7154b1593902e7d42606b64819217872eee10683 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3500 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18qemu/q35: uncomment cache-as-ram Kconfig entriesGerd Hoffmann
Change-Id: I8371764e3f2d16a3a776beb1c064f461b20a4262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3496 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add q35 supportGerd Hoffmann
Add support for the new q35 chipset emulation added in qemu 1.4. Change-Id: Iabfaa1310dc7b54c9d224635addebdfafe1fbfaf Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3430 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 19:56:58 +0000