Age | Commit message (Expand) | Author |
2010-12-08 | first round name simplification. drop the <component>_ prefix. | stepan |
2010-11-22 | Drop per-board ram_check() calls for now. | Uwe Hermann |
2010-11-22 | i855: Remove useless memctrl indirection. | Uwe Hermann |
2010-11-21 | Simplify a few code chunks, fix whitespace and indentation. | Uwe Hermann |
2010-11-21 | Drop excessive whitespace randomly sprinkled in romstage.c files. | Uwe Hermann |
2010-11-21 | Use DIMM0 et al in lots more places instead of hardocding values. | Uwe Hermann |
2010-11-20 | Unify DIMM SPD addressing. For Geode, change the | Patrick Georgi |
2010-10-13 | Enable or disable the power button in Kconfig | Peter Stuge |
2010-10-05 | Remove lib/ramtest.c-include from all CAR boards. | Patrick Georgi |
2010-09-27 | All these boards already had the CACHE_AS_RAM option in their individual | Warren Turkal |
2010-09-25 | Drop some useless "../../../" in #includes (trivial). | Uwe Hermann |
2010-09-21 | Cut the crap. | Uwe Hermann |
2010-09-07 | Set up an arbitrary amount of system memory on Geode LX, so | Aurelien Guillaume |
2010-08-30 | We call this cache as ram everywhere, so let's call it the same in Kconfig | Stefan Reinauer |
2010-08-30 | Restructured all vendors' Kconfig files to no longer source the boards' | Jens Rottmann |
2010-08-26 | Remove unused mainboard_config definitions. Trivial. | Myles Watson |
2010-08-03 | Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / | Stefan Reinauer |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-06-10 | This commit updates the Geode LX GLCP delay control setup from the v2 way to ... | Edwin Beasant |
2010-06-07 | replace outb -> port 0x80 with post_code() in some places. | Stefan Reinauer |
2010-05-09 | Remove pc80/serial.c includes in ROMCC boards and include | Patrick Georgi |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-14 | drop quite a lot of dead code that did nothing but produce warnings and make | Stefan Reinauer |
2010-04-14 | zero warnings days. Down to under 600 different warnings | Stefan Reinauer |
2010-04-14 | fix digitallogic adl855pc compilation (and clean up the warnings while at it) | Stefan Reinauer |
2010-04-11 | The ADL855PC was never confirmed working (in fact it's pretty sure that code | Stefan Reinauer |
2010-04-08 | Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so... | Myles Watson |
2010-04-08 | Remove duplicate registers in digitallogic/adl855pc's device tree | Patrick Georgi |
2010-04-07 | - copy_and_run() gets the same calling convention on AMD and on all the others. | Stefan Reinauer |
2010-04-07 | drop the use of function pointers from romcc code. | Stefan Reinauer |
2010-04-01 | -Â get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files. | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-31 | This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c and | Stefan Reinauer |
2010-03-29 | This drops the ASSEMBLY define from romstage.c, too | Stefan Reinauer |
2010-03-29 | __PRE_RAM__ is now correctly specified in the Makefile. No need to hack it into | Stefan Reinauer |
2010-03-22 | Fix all the format string warnings. | Myles Watson |
2010-03-22 | printk_foo -> printk(BIOS_FOO, ...) | Stefan Reinauer |
2010-03-17 | more warning fixes. | Stefan Reinauer |
2010-02-27 | - make HAVE_HARD_RESET match what newconfig did | Patrick Georgi |
2010-02-27 | This does the following: | Stefan Reinauer |
2010-02-25 | Move the ldscripts logic to src/arch/i386/Makefile.inc | Patrick Georgi |
2010-02-25 | Drop i855pm port and rename i855gme to i855 instead. | Stefan Reinauer |
2010-02-25 | Unify crt0s setup to src/arch/i386/Makefile.inc. This variable | Patrick Georgi |
2010-02-23 | Only handle code as "driver" that actually uses our driver | Patrick Georgi |
2010-02-09 | Move all the copies of the romstage.inc rule to | Patrick Georgi |
2010-02-08 | janitor task: unify and cleanup naming. | Stefan Reinauer |
2010-02-07 | fix further build.h dependencies that were undetected before we enabled it on | Stefan Reinauer |
2010-02-07 | newconfig is no more. | Patrick Georgi |
2010-02-04 | Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU. | Stefan Reinauer |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-25 | Fix ACPI build on a couple of boards (now that it's active) | Patrick Georgi |
2010-01-25 | More Kconfig changes to improve match with newconfig: | Patrick Georgi |
2010-01-25 | Align several kconfig options to match newconfig: | Patrick Georgi |
2010-01-16 | coreboot used to have two different "APIs" for memory accesses: | Stefan Reinauer |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2009-11-06 | Remove drivers/pci/onboard. The only purpose was for option ROMs, which are | Myles Watson |
2009-11-06 | Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb. | Uwe Hermann |
2009-10-30 | Fix, um... a typo. | Uwe Hermann |
2009-10-28 | Fix some builds with Kconfig. | Myles Watson |
2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-19 | Fix builds of amd/db800 and digitallogic/msm800sev with smaller bootblocks. | Myles Watson |
2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
2009-10-16 | Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop" | Peter Stuge |
2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
2009-10-09 | Remaining boards are Kconfig'd now. Whether they work | Patrick Georgi |
2009-10-07 | Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards | Uwe Hermann |
2009-10-04 | This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE. | Patrick Georgi |
2009-10-03 | Remove: | Patrick Georgi |
2009-09-23 | simplify source tree hierarchy: move files from sdram/ and ram/ to lib/ | Stefan Reinauer |
2009-08-12 | Kconfig! | Patrick Georgi |
2009-08-11 | Enable CBFS everywhere. All boards compiled for me (abuild tested), | Patrick Georgi |
2009-08-05 | Fix the generic code for copying and running coreboot_ram in case | Patrick Georgi |
2009-06-30 | the tool chain settings should not be in renamed (as they will never live in | Stefan Reinauer |
2009-06-30 | This patch unifies the use of config options in v2 to all start with CONFIG_ | Stefan Reinauer |
2009-06-19 | Undo my ugly commit that added uses clauses in lots of places instead of one. | Myles Watson |
2009-06-17 | Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial. | Myles Watson |
2009-06-06 | When I started refactoring mainboard Config.lb, I added two different | Carl-Daniel Hailfinger |
2009-04-30 | Add "printk" support to all CAR targets | Stefan Reinauer |
2009-04-22 | drop duplicate compiler options that are already mentioned in CFLAGS. | Stefan Reinauer |
2009-04-21 | Thanks to Myles' patch adding support for include statements, | Carl-Daniel Hailfinger |
2009-04-20 | Fix implicit declarations of done_cache_as_ram_main by adding a | Carl-Daniel Hailfinger |
2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
2009-04-12 | This patch cleans up the calls to $CC in mainboard Config.lb files. They | Carl-Daniel Hailfinger |
2009-04-11 | Kill remaining unneeded CAR/ROMCC if-blocks. | Carl-Daniel Hailfinger |
2009-03-31 | Add the CONFIG_ROMS config variable. | Ronald G. Minnich |
2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
2009-02-12 | This patch converts __FUNCTION__ to __func__, since __func__ is standard. | Myles Watson |
2009-01-20 | This patch makes the recently added assembler debug optional, as it may | Stefan Reinauer |
2008-11-28 | This patch from Ralf Grosse Boerger makes debugging more comfortable. | Stefan Reinauer |
2008-10-13 | Drop unused (or commented / #if 0) reset.c files. | Uwe Hermann |
2008-10-12 | Drop tons of duplicated debug.c files, move common file to | Uwe Hermann |
2008-10-11 | Drop a number of duplicated failover.c files (they have the same content | Uwe Hermann |
2008-10-01 | The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots of | Carl-Daniel Hailfinger |
2008-09-04 | This changes the python generated makefiles | Carl-Daniel Hailfinger |