aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/digitallogic
AgeCommit message (Expand)Author
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-04-30mainboard/: Avoid including early_serial.c from w83627hfEdward O'Callaghan
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
2014-03-08ROMCC: Trigger internal compiler failure and apply the workaroundKyösti Mälkki
2014-01-22board_info.txt: Classify almost all remaining boards.Vladimir Serbinenko
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
2012-11-29Drop empty mainboard.cKyösti Mälkki
2012-11-29Drop empty mainboard_opsKyösti Mälkki
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
2012-07-26Drop mainboard chip.hStefan Reinauer
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
2012-04-24Intel 82801dx: compile early_smbus as separate objectKyösti Mälkki
2012-03-01Rename vendor identifiers in KconfigPatrick Georgi
2012-02-17intel/82801dx: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
2011-04-20run uart_init() from console_init, just like the other console initialization...Stefan Reinauer
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ...Stefan Reinauer
2011-04-15fix mainboards that were including earlymtrr.c without actually using it.Stefan Reinauer
2011-04-11Unify use of post_codeAlexandru Gagniuc
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
2010-11-22i855: Remove useless memctrl indirection.Uwe Hermann
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-10-13Enable or disable the power button in KconfigPeter Stuge
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
2010-09-21Cut the crap.Uwe Hermann
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ...Edwin Beasant
2010-06-07replace outb -> port 0x80 with post_code() in some places.Stefan Reinauer
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
2010-04-14fix digitallogic adl855pc compilation (and clean up the warnings while at it)Stefan Reinauer
2010-04-11The ADL855PC was never confirmed working (in fact it's pretty sure that codeStefan Reinauer
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-08Remove duplicate registers in digitallogic/adl855pc's device treePatrick Georgi
2010-04-07- copy_and_run() gets the same calling convention on AMD and on all the others.Stefan Reinauer
2010-04-07drop the use of function pointers from romcc code.Stefan Reinauer
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-22Fix all the format string warnings.Myles Watson
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-17more warning fixes.Stefan Reinauer
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-27This does the following:Stefan Reinauer
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Drop i855pm port and rename i855gme to i855 instead.Stefan Reinauer
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07fix further build.h dependencies that were undetected before we enabled it on Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-02-04Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU.Stefan Reinauer
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-25Fix ACPI build on a couple of boards (now that it's active)Patrick Georgi
2010-01-25More Kconfig changes to improve match with newconfig:Patrick Georgi
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-16coreboot used to have two different "APIs" for memory accesses:Stefan Reinauer
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-10-30Fix, um... a typo.Uwe Hermann
2009-10-28Fix some builds with Kconfig.Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann