| Age | Commit message (Collapse) | Author |
|---|
|
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the
same value and conveys additional information to the reader. Done with a
bulk search and replace operation.
Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
There are 4 different chassis types specified by vendor firmware, each
with a slightly different HWM configuration.
The chassis type to use is determined at runtime by reading a set of
4 PCH GPIOs: 70, 38, 17, and 1.
Additionally vendor firmware also provides an option to run the fans at
full speed. This is substituted with a coreboot nvram option in this
implementation.
This was tested to make fan control work on my OptiPlex 7020 SFF.
NOTE: This is superficially similar to the OptiPlex 9010's SCH5545
however the OptiPlex 9020's SCH5555 does not use externally
programmed EC firmware.
Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81529
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These machines come with a TPM1.2 device by default. It is somewhat
obsolete these days, but there is no harm in enabling it.
Change-Id: Iec05321862aed58695c256b00494e5953219786d
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81827
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously incorrect sets of SATA ports were enabled.
There are no publically available schematics, but I am almost certain
the new values are correct.
The original 0x33 value was carlessly copy pasted, and only enables
ports 0, 1, 4, 5, leaving 2, 3 disabled.
On the SFF, with 0x33 only the first 2 ports worked. I have verified
by plugging in devices under the stock firmware that 0, 1, 2 are the
ones that should be enabled, so setting the value to 0x7 per datasheet.
This was also tested in practice to work.
I don't have an MT, but I was told the two white ports didn't work
with 0x33, so those are most certainly ports 3, 4, hence me setting
the value to 0xf. If the MT's working ports are port 0, 1 on the PCH
this is correct.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I32cb236b8f8140fba4a04c23161363d21741dcbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81550
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The OptiPlex 7020 and 9020 use physically identical motherboards.
WARNING: PWM fan control doesn't work via the EC and the fan runs at a
fixed speed. There is likely more EC init to reverse engineer.
Each model comes in the following form factors:
- 7020: SFF, MT
- 9020: USFF (not currently supported), SFF, MT
(7020 SFF) Boots Linux and Windows 10:
- Tested with an i3-4160 and i5-4460
- DRAM init works using the MRC (4G, 4G+4G)
- iGPU init works using libgfxinit (VGA, 2x DP)
- PCIe 16x: tested, ok
- PCIe 4x: tested, ok
- All USB2 and USB3 ports work
- SMSC SCH5555 Super I/O: serial works, PS/2 untested
- Audio: back and front output works, internal speaker works,
mic inputs untested
- Ethernet: tested, works
(9020 MT)
- Tested by Michael Büchler (thanks for the overridetree)
Change-Id: Ie7c7089f443aef9890711c4412209bceb1f1e96a
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55232
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
