summaryrefslogtreecommitdiff
path: root/src/mainboard/cubietech
AgeCommit message (Collapse)Author
2014-12-02cubieboard: use new arm bootblock infrastructureAlexander Couzens
commit 8b685398 (ARM: Overhaul the ARM Makefile.) change config flags for cpu and mainboard bootblock initialization. Tested on a20/cubieboard2. Change-Id: I2a1019c2881bc7aada15322841204992d0106453 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/7188 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-30console: Move UART port defaults to mainboardKyösti Mälkki
Correct selection of UART depends of board layout, not the CPU internals, so default setting should originate from mainboard. Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5618 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
Rename coreboot_ram stage to ramstage. This is done in order to provide consistency with other stage names (bootblock, romstage) and to allow any Makefile rule generalization, required for patches to be submitted later. Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-03-29cubieboard: Enable the SD controller and mux SD pinsAlexandru Gagniuc
This step needs to be done before calling any MMC functionality. Change-Id: I88763072c8a541ddba794e79fb55e82eb2f187a9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4745 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-19boardstatus: Add new category "sbc".Vladimir Serbinenko
Change-Id: I8a7bf265ebb30dd5997f93729a0329e74f463a23 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4739 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-14cubieboard: Setup CPU clock in romstage and load ramstageAlexandru Gagniuc
This completes the romstage for the cubieboard. Change-Id: If3272d8a9e414f782892bc41b34b5e2dece5d7e1 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4686 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-13cubieboard: Configure system voltages from devicetreeAlexandru Gagniuc
Change-Id: I93bac9bf94f5bafcd3ff0c3d5763b31d3ee9959b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4640 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-09cubieboard: Initialize memory in bootblockAlexandru Gagniuc
Even though the Allwinner A10 is limited to a 24KiB bootblock, the memory initialization takes only about 3KiB and leaves enough room for an MMC or NAND driver, so init the memory early on. The advantage is that we can eliminate complicated logistics of where to cache CBFS and where to load the ramstage in SRAM. Change-Id: Id549552ed509434e831db60deaef28e04d62417f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4630 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-01-09cubieboard: Keep AHB clock within specsAlexandru Gagniuc
The CPU was clocked at 384MHz in the bootblock, but the AHB bus has a maximum rated frequency of 250MHz. Its clock needs to be divided to keep it within spec. Overclocking the AHB bus hung the CPU when memory was accessed. Change-Id: I7cb9cdd1f126b3d5b0446fc68af79b54946bc2d3 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4629 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-01-09cubieboard: Turn on green LED during bootblockAlexandru Gagniuc
Change-Id: I807060bde374e4a42abe306cecf838ab157c9515 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4600 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-01-08cpu/allwinner/a10: Refactor API for gating clocks to peripheralsAlexandru Gagniuc
Rather than having to track which bit in which register should be cleared or set to gate or ungate the clock to a certain peripheral, provide a simplified enum which encodes the register and bit. This change comes with a function which decodes the enum and gates/ungates the clock. This also removes the register-dependent bitmasks for APB0 and APB1 gating registers. Change-Id: Ib3ca16e54eb37eadc3ceb88f4ccc497829ac34bc Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4571 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-08cpu/allwinner/a10: Refactor and document pinmux APIAlexandru Gagniuc
Include a function to multiplex more than one pin at a time. This is useful for peripherals that have the same function number for all their pins. Since we now have two functions for muxing pins, also document them. Change-Id: I53997cc3a2586e3cf749cd672f69fb427659c67f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4565 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-08mainboard: Add preliminary support for A10-based CubieboardAlexandru Gagniuc
Add a minimal infrastructure which initializes the system clocks and serial console. Change-Id: I768ede6ccf8674ffe9fecd8925cec89768209cab Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 05:09:08 +0000