summaryrefslogtreecommitdiff
path: root/src/mainboard/bachmann
AgeCommit message (Collapse)Author
2018-05-24AMD geode/lx: Remove generic_sdram.c includeKyösti Mälkki
The file under lib/ will be removed with K8 and Geode LX is the only other platform using it. Change-Id: Id49d72358ecfc4aae4980e3ae787952073e5c838 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-18sb/amd/cs5536: Remove includes of C filesMartin Roth
The romstage for CS5536 platforms were including early_smbus.c and early_setup.c. Build these into romstage from the makefile, and remove the #includes. Add a Kconfig option for platforms that do not use the early smbus code. Change-Id: I2e6a9cd859292b4dd4720b547d1ff0bbb6c319cf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-08AMD geode: Avoid conflicting main() declarationKyösti Mälkki
Declaration of main in cpu/amd/car.h conflicts with the definition of main required for x86/postcar.c in main_decl.h. Change-Id: I19507b89a1e2ecf88ca574c560d4a9e9a3756f37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18615 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-18AMD boards: Fix romstage main() declarationKyösti Mälkki
Boards incorrectly used intel include file for AMD board. Change-Id: I6d3172d1aa5c91c989a6ef63066a7cd6f70013f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15232 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-30bachmann/ot200: Remove DRIVERS_I2C_IDREG Kconfig symbolMartin Roth
As far as I can tell the Kconfig symbol DRIVERS_I2C_IDREG never actually existed in the coreboot codebase. I didn't see anything that it might have been a typo of. Change-Id: Ib17de670e38e07ab4a4745143c42fa85da1754e1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12563 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-01-28bachmann/ot200: Fix cmos.layout.Vladimir Serbinenko
In current cmos.layout baud_rate overlaps with hardcoded reboot byte. Fix the layout and provide the default for upgrade. Change-Id: I979b8743c4aab6f17b3acf61b92a74a333203379 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4804 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2014-01-22board_info.txt: Classify almost all remaining boards.Vladimir Serbinenko
Based on info from commit messages (most devel/eval boards are mentioned as such in commit message) and information from vendor sites (mostly based on form factor). Classification for siemens/sitemp_g1p1 is based on info by Nico Huber. For Google boards based on info from ML posted by Aaron Durbin. Remaining unclassified board is: google/pit For which very little info is available publically. Change-Id: I12dfff4c629811a48cfc77be27bdc5081530b8f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4759 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2013-06-10OT200: bring LEDs into a defined stateChristian Gmeiner
Keep in mind that we can _NOT_ read back the current state of the LEDS as some crazy FPGA designer wanted it that way. Change-Id: I5cd1ac598072318b3234d1ec35a79271655b46ac Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3271 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
Change-Id: I249c63646267ebe8dd8e06980aa6367a16fe7297 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
Change-Id: Ie329606852dfd7109acb694e9a9ff851b023cc63 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14OT200: reset MFGTP7 (backlight pwm)Christian Gmeiner
The CS5536 companion device has three different power domains. * working domain * standby domain * RTC domain When the system is "off" only the standby domain is powered. MFGPT[7:6] are member of the standby power domain. MFGPT7 is used to control the backlight of the device and so the timer gets used and configured during system boot. If the system does a reboot the timer stays configured and the Linux driver can not use it: "ot200-backlight: ot200-backlight.0: MFGPT 7 not availale" The cs5535-mfgpt has a function to hard-reset all MFGPTs but the system hangs after the first access to a MFGPT register - cause unknown. /* * This is a sledgehammer that resets all MFGPT timers. This is required by * some broken BIOSes which leave the system in an unstable state * (TinyBIOS 0.98, for example; fixed in 0.99). It's uncertain as to * whether or not this secret MSR can be used to release individual timers. * Jordan tells me that he and Mitch once played w/ it, but it's unclear * what the results of that were (and they experienced some instability). */ static void reset_all_timers(void) { uint32_t val, dummy; /* The following undocumented bit resets the MFGPT timers */ val = 0xFF; dummy = 0; wrmsr(MSR_MFGPT_SETUP, val, dummy); } After playing around with this undocumented MSR it looks like I only need to set bit 7 to free the MFGPT7. BTW, all MFGPT[0:5] will be reset during pll_reset(). Change-Id: I54a8d479ce495b0fc2f54db766a8d793bbb5d704 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/2527 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
For whatever reason tabs got inserted in the license header text. Remove one occurrence of that with the following command [1]. $ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,' [1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2460 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-15OT200: add CMOS supportChristian Gmeiner
nvramtool works as expected. root@CHGM-DEV-OT200:~# /home/vis/nvramtool -a baud_rate = 19200 debug_level = Emergency Change-Id: Ia25dc5b4f0ed3a2dd7cc67b7d3174db3a6eff70e Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/2382 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-10bachmann/ot200: Fix wrong IRQ number for PIRQDChristian Gmeiner
The used FPGA on the device triggers PIRQD for the membrane keyboard. The used linux driver for the keyboard uses the fixed IRQ number of 7. In order not to touch the linux driver and be compatible with proprietary BIOS change the irq_table in coreboot. Change-Id: If5bc929eb48bb1eafd401941ebb7d34cf5862c35 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1571 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-17Set SMBIOS mainboard version based on i2c eepromChristian Gmeiner
In the field there are different hardware revisions and some of them have problems with UDMA as a resistor is missing. We can detect this situation in coreboot and e.g. the linux kernel can take this knowledge and disable UDMA. Change-Id: Ib75cad7acedbc1dc65378bb9bfc3f353cbe21427 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-09-17Add i2c eeprom to device treeChristian Gmeiner
This eeprom is used to store some device relevant informations like hardware revision. Change-Id: I32bda9d5412bc5a96da0edb5ef0b6d1ba4caa2d8 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1511 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-13Add preliminary support for Bachmann electronic OT200Christian Gmeiner
Linux boots fine :) Change-Id: Ifda06e5220666534b87f528deae16d8b956c32b3 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1225 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>