summaryrefslogtreecommitdiff
path: root/src/mainboard/asus
AgeCommit message (Collapse)Author
2021-01-21cpu/intel/socket_LGA775: Increase DCACHE_RAM_SIZEElyes HAOUAS
Increase DCACHE_RAM_SIZE to 32kB and remove "NO_CBFS_MCACHE". It’s quite safe to increase DCACHE_RAM_SIZE. All LGA775 targets should have at least 256K L2 cache. That is plenty for XIP RO cache of bootblock + romstage and a 32K CAR. Change-Id: I393b2727bd90a990c3108a4dbead62b17d7fc531 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-01-20mainboards: Drop GNVS cmap and cmbpKyösti Mälkki
Functionality depends of CMAP and CMBP references inside board specific ASL implementation. Only roda/rk9 and roda/rk886ex has that. Change-Id: I4da8292375cb589d67dc68496b1e81971bc2a61f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49274 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-20ACPI GNVS: Drop APIC, factor out MPENKyösti Mälkki
APIC was not referenced anywhere in ASL. MPEN has references under boards: getac/p470, roda/rk9, roda/rk886ex. MPEN has reference also in Intel SpeedStep ASL. Replace static MPEN with detection of multiple CPUs installed. Change-Id: Ib5f06416b23196b7227ccd5814162925c31c084b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-18mainboards: Move get_cst_entries()Kyösti Mälkki
Change-Id: I02cfbcb7a340bd574290e4ac486010fc4cbcd3be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49351 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18ACPI: Select ACPI_SOC_NVS only where suitableKyösti Mälkki
Having some symmetry with <soc/nvs.h> now allows to reduce the amount of gluelogic to determine the size and cbmc field of struct global_nvs. Since GNVS creation is now controlled by ACPI_SOC_NVS, drivers/amd/agesa/nvs.c becomes obsolete and soc/amd/cezanne cannot have this selected until <soc/nvs.h> exists. Change-Id: Ia9ec853ff7f5e7908f7e8fc179ac27d0da08e19d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Rename `cX_acpower` optionsAngel Pons
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Unify ACPI C-state optionsAngel Pons
All mainboards use the same values for AC and battery, even desktop boards without a battery. Use the AC values everywhere and drop the battery values. Subsequent commits will rename the AC power options accordingly, and will also clean up the corresponding acpigen code. This is intentional so as to ease reviewing the devicetree changes. Also update util/autoport accordingly. Change-Id: I581dc9b733d1f3006a4dc81d8a2fec255d2a0a0f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02cbfs: Enable CBFS mcache on most chipsetsJulius Werner
This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Some older chipsets with insufficient SRAM/CAR space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23mb/**/cmos.layout: Remove crusty commentsAngel Pons
Most of these comments have been copy-pasted or serve no purpose other than to eventually turn into misleading info. While the description of the first 120 bits of CMOS could be useful, it should instead be added to the documentation for the CMOS option infrastructure, or /dev/null. Moreover, trim down newlines to no more than two consecutive newlines. Change-Id: I119b248821221e68c4e31edba71ba83b7d2e14e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-20mb/asus/f2a85-m_pro: Enable PCIe bridge 00:15.2 in AGESAPaul Menzel
Currently, the PCIe bridge 00:15.2 is not detected by coreboot, causing the connected network device also to be missing. This is caused by not configuring the third of the four PCIe General Purpose Ports (GPP) of the AMD Fusion Controller Hub (FCH), which can be exposed as one to four PCIe devices. So, enable it in AGESA but disable enumeration in coreboot. Otherwise, the serial console stops working in romstage after […] PCI: 00:15.1 bridge ctrl <- 0013 PCI: 00:15.1 cmd <- 06 PCI: 00:15.2 bridge ctrl <- 0013 PCI: 00:15.2 cmd <- 07 and the system hangs in the payload (SeaBIOS banner is shown on VGA attached monitor). TEST=Serial console and payload works, and Linux 5.10-rc2 configures PCIe bridge. Output of `lspci -t`: -[0000:00]-+-00.0 +-00.2 +-01.0 +-01.1 +-10.0 +-10.1 +-11.0 +-12.0 +-12.2 +-13.0 +-13.2 +-14.0 +-14.2 +-14.3 +-14.4-[01]-- +-14.5 +-15.0-[02]-- +-15.1-[03]----00.0 +-15.2-[04]----00.0 +-18.0 +-18.1 +-18.2 +-18.3 +-18.4 \-18.5 Change-Id: Ia1d60a212b0d249c7d8b3f8ec16baf5e93c985da Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46527 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10mb/asus/f2a85-m: Disable `HUDSON_LEGACY_FREE` for working serial consolePaul Menzel
The Asus F2A85-M, F2A85-M LE and F2A85-M PRO all have a Super I/O, and therefore have legacy devices like a serial console. Selecting `HUDSON_LEGACY_FREE` currently disable the serial console during bootup in romstage, which is undesired. So, deselect the symbol by default. TEST=Boot Asus F2A85-M PRO and verify serial console is *not* disabled during romstage. Change-Id: Ia6588c0d4b2c24c7cb9da04805d13274c8ae295e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47363 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29mb/asus/f2a85-m_pro: Enable super-I/O LDNs 0x0f and 0x14Nico Huber
The LDNs don't have a 0x30 register to enable them. However, with the devices set to `off`, coreboot won't configure them. Change-Id: Iaea37c88524904a1dae8a6d3b5f07c6ea25bc3b2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46021 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29mb/asus/f2a85-m_pro: Clean up super-I/O GPIO settingsNico Huber
Drop useless writes to read-only registers and don't re-write default 0x00 values. In detail: * Don't write read-only status registers. * Don't try to write input bits in data registers (iow. mask data values: `data &= ~io`). * Don't write data registers if all GPIOs are set as inputs (`io == 0xff`). * Don't write default 0x00 for inversion and multiplex registers. Note: Both GPIO0 and WDT1 values look spurious. Maybe they were dumped with the virtual devices disabled? Change-Id: I7d948d6b697285e61e4352b7354b924dbf511e9a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46020 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29mb/asus/f2a85-m_pro: Comment and group super-I/O GPIO settingsNico Huber
Change-Id: I8f5a87d006f8bf20af40f7a4f09b1e4b597ba79f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46019 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29mb/asus/f2a85-m_pro: Enable GPIO0 on the super I/ONico Huber
It is enabled by the vendor firmware. Also drop spurious `io 0x60 = 0x00` setting. It's the default anyway and the resource is kept disabled (it's controlled by the virtual LDN 2e.008). This fixes the hang in `PCI: 00:14.3 init` when doing `outb(0, DMA1_RESET_REG)`. Fixes: 2f8192bc ("asus/f2a85m_pro: Fix superio type in devicetree") Change-Id: I351c93033bf2afd824eb6baa8d7625e7a33a295a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26src: Include <arch/io.h> when appropriateElyes HAOUAS
Change-Id: I4077b9dfeeb2a9126c35bbdd3d14c52e55a5e87c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45404 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21mb/asus/f2a85-m_pro: Turn super-i/o 0x30 writes into on/offNico Huber
The 0x30 register is eventually controlled by coreboot's pnp_enable_resources() based on the on/off setting. Other register settings were grouped with their respective "virtual" LDN, where possible. Note, this temporarily breaks LDN 8 settings, as coreboot will ignore configuration for disabled devices. Change-Id: I8585dd08eed407ab12258f2accaa63dab294e7d8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-21mb/asus/f2a85-m_pro: Use `irq` in dt for single-byte registersNico Huber
The `io` statement will prepare a 16-bit write, hence use `irq` for miscellaneous 8-bit registers and fix actual `io` settings (i.e. merge 0x61 writes into 0x60). Note, using `irq` is still just a hack as these are neither I/O nor IRQs, but it's common practice in coreboot. Change-Id: I2e1c2286be726d126598cc4a97bb15a57faef42f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-21mb/asus/f2a85-m_pro: Enable keyboard controller in devicetreePaul Menzel
The mainboard has a PS/2 port, so enable the keyboard controller in the devicetree. The PS/2 keyboard now works in SeaBIOS payload, but not in GNU/Linux, probably as ACPI code still needs to be added. Change-Id: I7846633bc1a3bdf6bffae628e0542bb8fb684804 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-21mb/asus/f2a85-m_pro: Enable UART A in Super I/OPaul Menzel
Currently, the serial console does not work. With the serial port enabled in the vendor firmware, `superiotool` outputs the global control register values below. Found Nuvoton NCT6779D (id=0xc562) at 0x2e Register dump: idx 10 11 13 14 1a 1b 1c 1d 20 21 22 24 25 26 27 28 2a 2b 2c 2f val ff ff ff ff 3a 28 00 10 c5 62 df 04 00 00 10 00 48 20 00 01 def ff ff 00 00 30 70 10 00 c5 62 ff 04 00 MM 00 00 c0 00 01 MM UART A needs to be enabled in CR 0x2a by clearing bit 7. Do this by selecting the Super I/O Kconfig symbol `SUPERIO_NUVOTON_COMMON_COM_A`. This changes the default value 0xc0 to 0x40. Note, due configuring the system as legacy free with `HUDSON_LEGACY_FREE=y`, AGESA in romstage disables the LPC controller in `FchInitResetLpcProgram()`. coreboot-4.12-3417-g192b9576fe Tue Oct 20 09:15:53 UTC 2020 romstage starting (log level: 7)... APIC 00: CPU Family_Model = 00610f31 APIC 00: ** Enter AmdInitReset [00020007] Fch OEM config in INIT RESET `AmdInitReset() returned AGESA_SUCCESS` is not transmitted anymore. Only when coreboot enables the LPC controller again in ramstage, serial output continues. PCI: 00:14.4 bridge ctrl <- 0013 PCI: 00:14.4 cmd <- 00 PCI: 00:14.5 cmd <- 02 PCI: 00:15.0 bridge ctrl <- 0013 PCI: 00:15.0 cmd <- 00 PCI: 00:15.1 bridge ctrl <- 0013 […] done. BS: BS_DEV_ENABLE run times (exec / console): 0 / 30 ms Initializing devices... CPU_CLUSTER: 0 init […] Note, due to incorrect Super I/O configuration in the devicetree, the boot hangs in `PCI: 00:14.3 init` when doing `outb(0, DMA1_RESET_REG)`. This will be fixed in follow-up commits. TEST=Receive (some) coreboot log messages over the serial console. Change-Id: I0aa367316f274ed0dd5964ba5ed045b9aeaccf8d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-19superio/nuvoton: Factor out equivalent Kconfig optionAngel Pons
There's no need to have multiple Kconfig symbols which do the same thing. Introduce `SUPERIO_NUVOTON_COMMON_COM_A` and update boards to use the new symbol. To preserve alphabetical order in mainboard Kconfig, place the new symbol above the Super I/O symbol (instead of below). Change-Id: Ic0a30b3177a1a535261525638be301ae07c59c14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46522 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-17AGESA mb: Replace tab with space in macro definition for consistencyPaul Menzel
With a tabulator length of eight spaces, the alignment is the same, but the other macro definitions are using a space, so do the same for consistency, better alignment in diff views. git grep -l -P 'define\tBLD' | xargs sed -i 's,define\tBLD,define BLD,g' Change-Id: Ib71057c84dc897028cb0ceac29952e67bc541d2e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13mb/*/*/dsdt.asl: Drop useless comments in DefinitionBlock()Elyes HAOUAS
Change-Id: I1e0489ec6730760f74102cdd00e4aaa66975d69a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mainboard/*/*/dsdt.asl: Make DefinitionBlock's AMLFileName uniformElyes HAOUAS
Make output AML file name uniform. Change-Id: Ic6cac4748a6159c695888b2737ada677d91f4262 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-22src/mainboard: Add missing <console/console.h>Elyes HAOUAS
"post_code()" needs <console/console.h>. Change-Id: Ice92d5e259b369da949006bf471a0cb249291897 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-21mb/asus/am1i-a: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ib56b56c05df154522172bff2e6746280286a481f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-17nb/intel/sandybridge: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
This allows us to drop some casts to uintptr_t around the tree. The MCHBAR32 macro still needs a cast to preserve reproducibility. Only the native raminit path needs the cast, the MRC path does not. Tested with BUILD_TIMELESS=1, these boards remain identical: - Lenovo ThinkPad X230 - Dell OptiPlex 9010 - Roda RW11 (with MRC raminit) Change-Id: I8ca1c35e2c1f1b4f0d83bd7bb080b8667dbe3cb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45349 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
RCBA is located in the PCH. Replace all instances with the already-defined `DEFAULT_RCBA` macro, which is equivalent. Change-Id: I4b92737820b126d32da09b69e09675464aa22e31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45348 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08mb/asus/a88xm-e/Kconfig: Correct 'HUDSON_XHCI_ENABLE' symbolElyes HAOUAS
Change-Id: Ibe8844db74b43009e7c49df78882ed76b0bbebae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-20mb/asus/am1i-a/buildOpts.c: choose the 1600 MT/s RAM frequencyMike Banon
Together with the "AMD_XMP" changes, now this board with Crucial BLT8G3D1869DT1TX0 sticks could run at 1600 MT/s CL8 (8-8-9-23) speeds. Earlier only 1333 MT/s CL9 (9-9-10-27) has been possible with coreboot. 1866 MT/s CL9 is impossible on f16kb without northbridge overclocking. tRP in "CL-tRCD-tRP-tRAS" gets set 1 point higher by AGESA because of Errata 638. See more info in a BKDG for AMD Family 16h Models 00h-0Fh. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I7e9f5120421221043f9f9dfe143b51bfa61936be Reviewed-on: https://review.coreboot.org/c/coreboot/+/44462 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unneded whitespace before tabElyes HAOUAS
Also remove unneded tab in 'picasso/Makefile.c' file. Change-Id: Id25b2d308645c449c205b3a946f89b6b6de62a47 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-17x4x boards: Remove unused/deprecated cmos bitsArthur Heymans
Receiver enable results are now saved in flash. Change-Id: Ib1a985147b081860c58d1649c4e50301b8144b0c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44251 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/asus: Add Asus A88XM-E FM2+ with documentationBalazs Vinarz
The port is based on the F2A85-M, the main differences are: - 2 DDR3 dimms - 2 PS/2 ports - 2*USB2.0 and 2*USB3.0 ports - 3+2 phase VRM - 6 channel audio - 6 SATA ports - ASP1206 VRM controller - Bolton D4 chipset - no optical SPDIF/IO Successfully booted configurations: -RAM: 2*8GB Kingston KVR 1333Mhz LP, 2*8GB Crucial BLT8G3D1869DT1TX0 -CPU: AMD A8-6500 (Richland), AMD A10-6700 (Richland) -OS: Arch Linux 4.19 (SATA, USB), Linux Mint 19.3, Artix Linux 2019 -SeaBIOS: 1.12 and 1.13 Known problems: - IRQ routing is done incorrect way - common problem of fam15h boards - Windows 7 can't boot because of the incomplete ACPI implementation Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90 Signed-off-by: Balazs Vinarz <vinibali1@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30987 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/*/*/devicetree.cb: Normalize disabled PIRQ valuesAngel Pons
If bit 7 of a PIRQ route is set, it is disabled. Modern OSes don't use PIRQ routing, so we might as well zero the other bits for consistency. Tested on Asrock B85M Pro4 with SeaBIOS 1.13.0, still boots. Change-Id: I78980b9ea5e878a6200df0f6c18c5e7d06a7950a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43861 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/asus/p2b: Enable hardware monitor access via I/O on ISA busKeith Hui
Set up a 8-byte I/O range at 0x290-0x297 as PIIX4's generic device 9, which activates a chip select when this range is accessed. On the P2B family it connects to the W83781D hardware monitor, allowing access to it over the ISA bus, just like vendor firmware. Apparently this does not work on p3b-f, but no ill effects observed either. TEST=On p2b-ls lm-sensors can detect chip and get readings over ISA. Change-Id: Iaed1df7230359e94c580c305f4769c8bb4f5fce0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/asus/p2b: Drop select SMPKyösti Mälkki
Variants that select BASE_ASUS_P2B_D will also get MAX_CPUS==2 below, so this was redundant. Change-Id: I9048a4821f19d90e1489b09e294d2551941abf10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel: Define CONFIG_FIXED_SMBUS_IO_BASEAngel Pons
Make it default to 0x400, which is what the touched southbridges use. Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons
The ACPI specification, version 2.0 says: _BFS is an optional control method. So, remove them. They have been copy-pasted around quite a bit, and do not do anything useful. Plus, it's deprecated in later ACPI versions. Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10AMD mainboards: Drop commented-out includeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I6f71419ea23b973b0bedb426e20cb3dc460ef68d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43271 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09ACPI: Drop commented-out DSDT DefinitionBlock instancesAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I9b5589d4596eead83a5897b083ccb85ef05a03d5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43270 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/asus/p8z77-v_lx2: Correct Super I/O GPIO settingsAngel Pons
Compared against superiotool dumps with vendor firmware. Still boots. Change-Id: I49f36b2805e36695d7a53865e87dfafdb897594e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42482 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/asus/p8z77-m_pro: Remove PS/2 keyboard & mouse duplicateKeith Hui
PS/2 keyboard and mouse devices are declared twice in the DSDT, once in mainboard and once in southbridge. It would appear in Windows Device Manager as two PS/2 keyboards and two PS/2 mouses, all with resource conflicts. This change drops the declaration from mainboard. The issue was discovered when this setup was copied for p8z77-m and being boot tested. Change-Id: I746a960aaf3992acbcb6a7364641fc4fd12002d2 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41225 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22src/mainboard: Remove unused include 'sandybridge.h'Elyes HAOUAS
Change-Id: I9356a56c34d1c6746cf8acfe931386ffed58ba74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-19mb/*/*/Kconfig: guard board name in quotesPatrick Georgi
New kconfig dislikes unquoted slashes. Change-Id: Ief242de081071021b9c904a24535d025f6674270 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15i945 boards: Factor out MAX_CPUSAngel Pons
At least one mobile 945 series northbridge supports 4 threads, because the dual-core Atom 330 CPU supports Hyper-threading. Therefore, we use that as the default for this chipset. Change-Id: I899ed1644d9b2da4fc72f09233a421200770110d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41845 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15x4x boards: Factor out MAX_CPUSAngel Pons
LGA775 CPUs can have at most 4 threads, and Eaglelake supports them. As this socket is also used by other chipsets, temporarily place this symbol into the northbridge scope until all chipsets are factored out. Change-Id: I6e01363d995e135815cc70779e0cd5baf806cf60 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-15sandybridge boards: Factor out MAX_CPUSAngel Pons
Also update autoport accordingly. Change-Id: I12481363cf0e7afc54e2e339504f70632e8d72e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41839 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06amd/agesa/hudson boards: Get rid of power button devicePaul Menzel
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD AGESA Hudson boards. No idea, if this is correct for the two laptops. The Lenovo G505s also incorrectly defines two power buttons. [ 0.911423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.911434] ACPI: Power Button [PWRB] [ 0.911493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.912326] ACPI: Power Button [PWRF] If the generic power button device is needed, the POWER_BUTTON flag should be set in FADT. The GPE ACPI code seems to originate from commit 806def8c (I missed the svn add on r3787. These are the additional files., Add AMD dbm690t ACPI support.), and was copied over. Change-Id: I88950e15faf1b90ca6e688864bac40bf9779c32e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-06-02src: Remove unused '#include <cpu/x86/lapic.h>'Elyes HAOUAS
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'. Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/asus/p2b: Add p3b-f IRQ routing to DSDTKeith Hui
Change-Id: Ie4d24eee1cffd65707887dd621e3de873d20cf01 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41097 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-01src: Fix up #-commented SPDX headersAngel Pons
Delete leading empty comment lines. Change-Id: I8e14a0ad1e1e2227e4fb201f5d157f56f289f286 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-06-01AGESA f14/f15tn/f16kb: Clean up buildOpts.c filesAngel Pons
Until now, the buildOpts.c files were primarily made out of copy-pasted AGESA options, commented-out definitions and several useless comments; that is, the materialization of technical debt in GCC-parsable form... Until now. It is assumed that the boards in the tree still boot. So, by comparing their settings, we can extract saner defaults to place into AGESA. Many of the settings were common across all boards of the same family, so we promote those values to default settings. In some cases flipping a flag was required, so the macros to alter that option had to be adapted as well. Since those AGESA versions are expected to never receive updates, it should not be a problem to change their files to suit our needs. As a result, all but two buildOpts.c files now have less than 100 lines. AGESA f14 boards need less than 50 lines, and f15tn/f16kb just require about 60 or 70 lines in those files. Hopefully, this will make porting more mainboards using AGESA f14/f15tn/f16kb a substantially easier task. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ife1ca5177d85441b9a7b24d64d7fcbabde6e0409 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-29AGESA boards: Fix typo in *OVERRIDES* in commentPaul Menzel
Run the command below to fix all occurrences. git grep -l OVERIDES | xargs sed -i 's/OVERIDES/OVERRIDES/g' Change-Id: I5ca237500a0ecff59203480ecc3c992991f08130 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-05-26AGESA f14/f15tn/f16kb: Deduplicate RAM settingsAngel Pons
On AGESA f14/f15tn, various RAM-related options were defined in an enum. However, the preprocessor mess can't compare enum values. To make AGESA build, each board redefined them as macros, shadowing the enum elements. Clean this up by replacing the enums with macros in AGESA headers, and delete the now-redundant redefinitions from all the mainboards. Note that AGESA f16kb already uses macros, but each mainboard still had commented-out definitions. Remove them as well, as they are unnecessary. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ie1085539013d3ae0363b1596fa48555300e45172 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41666 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26AGESA f16kb: Factor out default MTRR settingsAngel Pons
All AGESA f16kb boards use the same MTRR values. Factor them out, while still allowing a board to override them via BLDCFG. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I236e9d45505e92027acc3ba5ff496f5e2f09b9f3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-26AGESA f15tn: Factor out default MTRR settingsAngel Pons
All AGESA f15tn boards use the same MTRR values. Factor them out, while still allowing a board to override them via BLDCFG. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I90c95493de1bb5b8f32c06b9575fef3aa7aca031 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-26AGESA f14/f15tn/f16kb: Factor out memory settingsAngel Pons
We use the same values everywhere, so we might as well factor them out. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ie6f166034d5d642dff37730a8d83264fb2e019b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26AGESA f14/f15tn/f16kb: Factor out PCI MMIO base/sizeAngel Pons
We set BLDCFG_PCI_MMIO_BASE and BLDCFG_PCI_MMIO_SIZE to the same values everywhere, so we might as well factor them out. As we have equivalent Kconfig options in coreboot, also deprecate overriding them via BLDCFG. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I7244c39d2c2aa02a3a9092ddae98e4ac9da89107 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-26AGESA f14/f15tn/f16kb: Factor out AGESA_VERSION_STRINGAngel Pons
We use the same AGESA version numbers on all but one mainboard, so we might as well factor them out. The only exception is asrock/e350m1, which has the f15tn/f16kb version number even though it actually uses AGESA f14. To preserve reproducibility, do not change it in this commit. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I0dad2352ccda454d5545f17228d52e4ff4f23f20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41591 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26AGESA f14/f15tn/f16kb: Factor out AGESA_PACKAGE_STRINGAngel Pons
We use the same value everywhere, so factor it out. Note that the field where this value ends up in was doubled in size for AGESA fam16kb, but we did not update the definition to fill in the additional space. We are not changing it in this commit so as to preserve binary reproducibility. In any case, add a FIXME explaining why this value may not be correct. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ied118d534ee1e9728db843944d1e042760b4f32c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26mb/*/*/buildOpts.c: Clean up whitespaceAngel Pons
Drop multiple blank lines and use one space inside C-style comments. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: Ibe1f279dd22ae7657ea7b7766f88004dbf4dceb5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-26mb/*/*/buildOpts.c: Drop BLDCFG_IR_PIN_CONTROLAngel Pons
This does not exist anywhere in the entire coreboot tree. Drop it. TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb mainboards result in identical coreboot binaries. Change-Id: I80320a20f4b44896e72d701a1d98786cb3a93dcc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: Ia0dbf7b946d42bda11b904a9caff5a402b553b33 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I7089b29e881d74d31477e2df1c5fa043fe353343 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41358 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-17mb/asus/p2b: Remove variant validation guards from DSDTKeith Hui
With conversion to variant structure complete, remove temporary guards inserted to help validate the move. With this change, all P2B family boards (currently p2b and p2b-ls) share the same S-state declarations. TEST=No apparent ACPI regression observed on p2b-ls. Change-Id: Ibd6e49adeae2a42800ee5bfd74b3850eb19843a5 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stdint.h>'Elyes HAOUAS
unused includes of <stdin.h> found using following commande: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|uint8_t\|int16_t\|uint16_t\|int32_t\|uint32_t\|int64_t\| uint64_t\|intptr_t\|uintptr_t\|intmax_t\|uintmax_t\|s8\|u8\|s16\| u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|UINT8_MAX\|INT16_MIN\ |INT16_MAX\|UINT16_MAX\|INT32_MIN\|INT32_MAX\|UINT32_MAX\|INT64_MIN\ |INT64_MAX\|UINT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|UINTMAX_MAX' -- src/) |grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Icb9b54c6abfb18d1e263665981968a4d7cccabeb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mainboard/asus/p3b-f: Reintroduce as variant of p2bKeith Hui
Fold this last ASUS 440BX board into the P2B family, while bringing in some changes: - Devicetree becomes overridetree. - Remove non-existent IR device and disable ACPI device on Super I/O to match OEM firmware. - Add SB GPO settings from OEM firmware to devicetree. This disables the SPD enabling magic this board needs. By moving the enabling part to bootblock the hacky enable_spd hook can be eliminated. - Initialize the serial port in bootblock, like the other boards. Boot tested on hardware. Change-Id: I65f2cb9d1bd4c82550de43889e3502526a46bd18 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41047 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10src/mainboard: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/**/dsdt.asl: Drop unused ACPI_VIDEO_DEVICEAngel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: I596d4d19277555894ab728e32a44e34a5a21e21d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-04asus/p2b: Enable IDE and UDMA for all variantsKeith Hui
There's no reason not to. Change-Id: I12c9e0f66c437d8add5c4096fd2a5e747d082799 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-02mb/asus/p8h61-m_pro: Disable SVID LDNAngel Pons
The SVID functionality is not used on this mainboard. Turn it off. Change-Id: Iea891975b32d24f54edec9d8c36391ec60a37d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02mb/asus/p8h61-m_pro: Disable SB-TSI base addressAngel Pons
SB-TSI is specific to AMD platforms, but this is an Intel board. Change-Id: I5eb7e3bc920103279dfca3a9ec14a41666404993 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40738 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02mb/asus/p8h61-m_pro: Fix function of pin 70Angel Pons
The board uses the pin for Deep S5, but the code was setting 3VSBSW. Change-Id: I81c865358002e6af500658efea851ab8c8202950 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02mb/asus/p2b*: Get rid of power button deviceKeith Hui
These boards have the same issue as [27272]: Currently, two power buttons are exposed in ACPI, and detected by the operating system. > As per the ACPI specification, there are two types of power button > devices: > 1. Fixed hardware power button > 2. Generic hardware power button > > Fixed hardware power button is added by the OSPM if POWER_BUTTON flag > is not set in FADT by the BIOS. This device has its programming model > in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this > power button device by default if the power button FADT flag is not > set. > > On the other hand, generic hardware power button can be used by > platforms if fixed register space cannot be used for the power button > device. In order to support this, power button device object with HID > PNP0C0C is expected to be added to ACPI tables. Additionally, > POWER_BUTTON flag should be set to indicate the presence of control > method for power button. > > [i440BX] mainboards implemented the generic hardware power button in > a broken manner i.e. power button object with HID PNP0C0C is added to > ACPI however none of the boards set POWER_BUTTON flag in FADT. This > results in Linux kernel adding both fixed hardware power button as > well as generic hardware power button to the list of devices present > on the system. Though this is mostly harmless, it is logically > incorrect and can confuse any userspace utilities scanning the ACPI > devices. Hardware tests on the P2B-LS shows the generic hardware power button is not working anyway - with FADT power button flag set, the board could not power off with the button. This change removes the generic hardware power button from all P2B mainboards and relies completely on the fixed hardware power button. TEST=Booted on P2B-LS, Linux detects only fixed hardware power button, button still powers off. [27272]: https://review.coreboot.org/27272 Change-Id: I0f5b7aaf32366360de3cce58cd742651a2bb46ba Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-25asus/p2b-ls: Replicate OEM GPO configurationKeith Hui
Replicate the GPO configurations from OEM BIOS, obtained via inteltool. Among the GPOs are termination controls for the onboard SCSI buses. TEST=read/write Maxtor Atlas 10k3 18GB HDD connected to Ultra2 LVD port Change-Id: I86183acd8e1a830d7639c21ec179fbdbe937f8ee Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38354 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/p8h61-m_lx3_r2_0: Add new mainboardAngel Pons
This is a micro ATX board with a LGA1155 socket and two DDR3 DIMM slots. Porting was done using autoport and then doing a bunch of manual edits. Actually, I have the PLUS variant, but they use the same PCB. The only difference is the capacitor quality. Working: - Both DIMM slots - PS/2 keyboard - S3 suspend/resume - Rear USB ports - Integrated graphics (libgfxinit) - VGA - All PCIe ports - Realtek GbE (coreboot must set the MAC address) - SATA ports - Native raminit - Flashing with flashrom - Rear audio output - VBT - Arch Linux using CorebootPayloadPkg Untested: - PS/2 mouse - The other audio jacks - EHCI debug - Front USB headers - Non-Linux OSes Change-Id: I385ee72673202d896041209ff2911995307cb6af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20mb/asus/p2b*: Switch to overridetreeKeith Hui
All variants will use the same lid/thermal-polarity config as a result, which looks the same for all recently boot-tested variants anyway. Change-Id: Iaaae4eae41ab0037e72375b255d9d1c3eca8d383 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39905 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: set a board type to AMD_PLATFORM_DESKTOPMike Banon
Original AMD_PLATFORM_MOBILE is incorrect because this board is a desktop one. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I02adedffe8624c38e7b93fadd0449ddf094388fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/33919 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: guard UMA-related options with CONFIG_GFXUMAMike Banon
Looks like the guard was dropped by mistake. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ie73c4d6cb557820ae7427fef15ca8110722c5b68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33916 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/asus/am1i-a/buildOpts.c: return the removed commentsMike Banon
These comments exist in other buildOpts.c files, but not in this one. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic0aab06f1956bc0bf9f96d6176643c113a1e4cc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-20mb/asus/am1i-a/buildOpts.c: Use fully-qualified paths on includesMike Banon
This makes it easier to know which files are being included. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic096848f23910e2ad9183e44d882450ab8d4fdf1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20mb/asus/am1i-a/buildOpts.c: reorder lines for comparison convenienceMike Banon
Reorder lines to make it more similar to buildOpts.c of Lenovo G505S. This improves diff results, which is convenient for debugging. Tested with BUILD_TIMELESS=1, hashes do not change. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I1674252fab2fc6fbf9be2b37e97a6f5ff97a04b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33913 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18asus/p2b*: Declare \_SB.PCI0.MBRS in DSDTKeith Hui
sb/intel/i82371eb/isa.c has code that fills this path with CPU info. Because it was not declared in the DSDT, Linux kernel 4.4.18 as used in Slackware 14.2 complains. Change-Id: Ib85dd02504b068bb7ea71be2f22e425f3831595a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18asus/p2b*: Move serial init into mainboard bootblockKeith Hui
With this bootblock messages are transmitted over serial too. TEST=Serial messages transmitted normally on asus/p2b-ls. Change-Id: I6f3ee68e7c76a8c6db6d75956e6a7fb75ef83850 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-18asus/p2b-ds: Transform into variantKeith Hui
TEST=build with BUILD_TIMELESS=1, binary does not change Change-Id: I864f939a84ee9e90013ba9d3fcc8a7e4bf03e4ee Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39904 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18asus/p2b-d: Transform into variantKeith Hui
TEST=build with BUILD_TIMELESS=1, binary does not change Change-Id: I1161c726c8c752b5b1e152e1617811989631096e Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39903 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-18asus/p2b-ls: Transform into variantKeith Hui
Boot tested on hardware. Change-Id: I24afd67dada135a8c2597f5ac1c7e91ce43897c9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39901 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>