Age | Commit message (Collapse) | Author |
|
Change-Id: I36095422559e6c160aa57f8907944faa4c192dee
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates a common instance of sleepstates.asl inside intel common
code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to
refer sleepstates.asl from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
S0/S3/S4/S5 entries after booting to OS.
Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: David Guckian
|
|
Field 'OEMID' & "OEM Table ID" are related to DSDT table
not to mainboard.
So use macro to set them respectvely to "COREv4" and
"COREBOOT".
Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
|
|
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version.
This will cause the AML interpreter to use 32-bit integers and math
if the version is 1, and 64-bit if the version is >=2.
Current spec version is 2 for ACPI 6.2-a.
Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29626
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with GRUB 2.02 as a payload, booting Arch Linux as
well as Debian. This code is based on the output of autoport
as well as other mainboards supported in coreboot already.
Working:
- Serial port I/O
- S3 suspend/resume. Untested with SeaBIOS since it failed
to resume on a similar board. It is likely to be due to
low memory corruption, but I have not worked on it.
- USB ports and headers
- USB3 ports attached to the ASM1042 controller. SeaBIOS can
boot from them, and it is likely GRUB can detect devices on
those ports as well. The chip has a small SPI flash nearby,
which seems to hold an Option ROM.
- Gigabit Ethernet
- Integrated graphics (libgfxinit)
- VGA BIOS for integrated graphics init
- PCIe x16 graphics
- PCIe x1
- SATA controller
- Hardware Monitor
- Fan Control (fancontrol on linux works well)
- Native raminit
- flashrom, using the internal programmer. Tested with coreboot,
as well as with the vendor firmware.
- NVRAM settings. Only debug_level has been tested.
Untested:
- DVI port. It can detect a "fake" display, that is, an
EEPROM connected to the DVI port. Thus, gma-mainboard.ads
has been setup accordingly.
- PS/2 port.
- Audio: Only rear output (green) has been tested.
- EHCI debug.
- Parallel port header.
- Non-Linux OSes
- ACPI thermal zone and fan control (probably not working)
Not working:
- Booting from devices attached to the ASM1061 controller.
Devices on ports work fine once Linux has loaded.
- Any SATA devices with Tianocore (payload issue)
Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/26419
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|