summaryrefslogtreecommitdiff
path: root/src/mainboard/asus/m4a785t-m
AgeCommit message (Collapse)Author
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-10-01mainboard/*/*/*/usb.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Id46a0c4ca59dc7224c2eedd674ea3a5486509de1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16824 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-10ACPI: Work around IASL warning reading/writing same registerMartin Roth
The newer versions of IASL are unhappy when an operator has the same object as both source and destination. The warning can be completely disabled with a command line argument, but in general, I'd really rather not just disable warnings. The bits in this register are write 1 to clear, so reading and writing the same register is what we want to do. Instead, store it in a temporary register then write it in a second operation. Fixes warning: dsdt.aml 1396: Store(PWST, PWST) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I52d73d4431db237be83016d67cd397f31b53d9c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24northbridge/amd/amdfam10: Rename mislabeled iommu nvram option to gartTimothy Pearson
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12046 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24amd/acpi: Clean up SMBus references.Tobias Diedrich
Replace the AMD SMBus section with the equivalent SB800 smbus.asl include or remove already commented-out sections. Verified by running the cpp preprocessor over the DSDTs and diffing the results against this patch. The only change is in src/mainboard/siemens/sitemp_g1p1/dsdt.asl, where someone added RADD and SADD to the OpRegion, but those are unused, so removing them is fine. Change-Id: I074c8a1ed1c9a944d4988752bd0fc42c199c766c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10618 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-23AMD Kconfig: Remove QRANK_DIMM_SUPPORT from unsupported platformsMartin Roth
The AMD K8 northbridge uses the Kconfig symbol QRANK_DIMM_SUPPORT, but the symbol was used on a number of Family 10 boards as well. AMD Family 10 doesn't use this Kconfig symbol for anything. I verified that the symbol wasn't used actually getting used in any of these platforms. Fixes Kconfig warnings for these 19 mainboards: warning: (BOARD_SPECIFIC_OPTIONS...) selects QRANK_DIMM_SUPPORT which has unmet direct dependencies (NORTHBRIDGE_AMD_AMDK8) Change-Id: I454992a4975566fd6439a21f5a800d0cfa1b4d3b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11300 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-23src/mainboard/*/*/board_info.txt: Added Release year for boardsMathias Friman
To simplify browsing the "Supported hardware" list, I added Release year for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel, lenovo, apple, jetway and hp. Still several models and manufacturers to add information to. This is more of a proof-of-concept. The "Release year" will be shown in the wiki page. Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947 Signed-off-by: Mathias Friman <mathias@workplays.se> Reviewed-on: http://review.coreboot.org/9963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-09AMD fam10: Always have AMDMCTKyösti Mälkki
Also drop some more #if UNUSED_CODE. Change-Id: I1bbe96a65c9240636ff7cfaf70c2ecbfb3aee715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8551 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-03amd/model_10xxx: Drop AMD_UCODE_PATCH_FILE selectionKyösti Mälkki
Include microcode updates in CBFS for every CPU revision the platform can support, as changing to different CPU revision should not require a coreboot rebuild. This increases CBFS usage from 2 kB to 14 kB. Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4521 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
This config was for AMD K8 only. Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4555 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-04Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-05-12Revert "Asus M4A785T-M: Add CMOS defaults."Peter Stuge
Revert commit b8b3e8bff32ee7dddcacec11e015f6683783eb2f [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h SCONFIG mainboard/asus/m4a785t-m/devicetree.cb make: *** No rule to make target `nvramtool', needed by `coreboot-builds/asus_m4a785t-m/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/3224 [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_asus_m4a785t_m/ Change-Id: I8bf33b62b56627f0eea9440ff5e5136e4122ef01 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3244 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-10Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ifa09c7a468e3e0713b426763266ae633e67d8397 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-30M4A785T-M: Add support for external GFX.Denis 'GNUtoo' Carikli
This commit enables the external graphics card. In order to work, the internal graphic card has to be disabled, that is done in src/device/device.c through: vga_onboard->ops->disable(vga_onboard); which calls the RS780 disable operation introduced in the following commit: "rs780: add .disable pcie_ops" This commit was tested with and without the following card: 02:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2) Thanks Aladyshev for the pointer(in the #coreboot IRC channel on Freenode servers): Dec 20 19:43:32 <Aladyshev> If you list your internal card in devicetree.cb, coreboot will distinguish external and internal VGA and choose external one Change-Id: I92e59dffd158db096a6e99d1ef6e2e248fef933c Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/2067 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-02-27asus/m4a785t-m: correct the CPU microcode patch selectionDenis 'GNUtoo' Carikli
Thanks to ruik on #coreboot Freenode IRC channel for explaining to me how to get the cpu revision: Feb 21 22:07:32 <ruik> ruik@ruik:~/coreboot$ cpuid | grep ^00000001 Feb 21 22:07:32 <ruik> 00000001 00020f32 00020800 00000001 178bfbff [..] Feb 21 22:07:44 <ruik> the 20f32 is mine CPUID The rest was just looking at the correspondance in src/cpu/amd/model_10xxx/update_microcode.c like Marc Jones explained(thanks Marc Jones) in the mailing list here: http://www.coreboot.org/pipermail/coreboot/2012-February/068332.html Change-Id: Ie0f004990e6b65456de009a4dcc306498bdb47e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/669 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/661 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-16M4A785T-M: fix TOM2.Denis 'GNUtoo' Carikli
This commit is based on the commit 94fa3db36688e8db133aebe14d480b0c4722e4c9 (AMD Mahogany Fam10 ACPI table fixes.) With commit permit to boot without pci=nocrs on the M4A785T-M board. Before the fix dmesg contained the following: [ 0.452071] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.480085] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.788222] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) Now it only contains: [ 0.312102] TOM: 0000000080000000 aka 2048M Change-Id: I5d517604abe938af19b70d57d92c1f973114c1cd Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/635 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-08Change DSDT Table ID for M4A785T-M boardAlec Ari
Change the DSDT Table ID for M4A785T-M from M4A785-M to M4A785T-M. This fixes a small copypasta. This is an updated patch set. Change-Id: I43ee024222cf04d03685ffaee616971100cc9e6c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/474 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02M4A785T-M: fix ACPI's P-States TableDenis 'GNUtoo' Carikli
Without that fix the linux kernel cannot change the frequency of the CPUs with cpufreq. Change-Id: Ie00e4b11b2561356952d8ae28bd0a00523b6d85f Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/458 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-02Add ASUS M4A785T-M mainboard supportDenis 'GNUtoo' Carikli
This mainboard is very similar to the M4A785-M, but it has DDR3 instead of DDR2. That's why most of the code was copied or included from the m4a785-m directory Notable changes between the two mainboards include: * the selection of the last microcode (mc_patch_010000b6.h) which made it pass the CPU init. * the selection of DDR3 which made it pass the ram init This change was tested with the Trisquel 5.0 GNU/Linux distribution which uses the linux-libre version 2.6.38-12-generic The mainboard boots fine, however some special care is required for the onboard sound CODEC, and the onboard video chip: * the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue is the same than the ASUS M4A785-M mainboard: It causes a flood of interupts which prevents booting * The internal video chip currently requires pci=nocrs, else the graphics are frozen as soon as the radeon module loads, and dmesg would print the following(the card only has 256M, and the mainboard was equiped with 2G of RAM): [ 3.674762] [drm] radeon: 3584M of VRAM memory ready [ 3.679863] [drm] radeon: 512M of GTT memory ready. instead of : [ 45.876088] [drm] radeon: 256M of VRAM memory ready [ 45.876089] [drm] radeon: 512M of GTT memory ready. * The screen(both VGA and HDMI) flickers at high resolution * Sometimes the computer freeze while changing the resolution (even the serial console stops responding) The following peripherals were tested: * The ath9k PCI wireless card was tested * The SATA hard disk works fine * the USB keyboard and mouse work fine * htop see 2 cores * serial port works under coreboot and GNU/Linux * power off and reboot works CPU frequency cannot be changed yet, this is addressed in a new commit. More detail are available here: http://www.coreboot.org/ASUS_M4A785T-M dmesg is available here: http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html The mailing list thread on the graphic problem is here: http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/457 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 00:02:08 +0000