summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock/b75pro3-m/devicetree.cb
AgeCommit message (Collapse)Author
2023-11-13mb/*: Update SPD mapping for sandybridge boardsKeith Hui
Boards without HAVE_SPD_IN_CBFS: Move SPD mapping into devicetree. Boards with HAVE_SPD_IN_CBFS: Convert to Haswell-style SPD mapping. Change-Id: Id6ac0a36b2fc0b9686f6e875dd020ae8dba72a72 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-08mb/asrock/b75pro3-m: Drop destructive GPIO settingsFabian Groffen
Without setting these GPIO bits, you /can/ power on your board after powering it down again. This includes after cutting the power. The only way to recover from this is to pull the CMOS battery and cut the power for 15mins. Then make sure you don't do this GPIO trickery or you end up with the same state of basically an unresponsive "dead" mainboard. So flash the chip before you pull the battery. One small workaround I found when you like to flash from the system, is to press the power button with 1 second after you enable power to the board. In this small timeframe, apparently the superio chip didn't intialise/restore/gets set with the settings that make it never want to power on again. The other workaround is to connect the appriopriate pins on the ATX power connector to force power to the mainboard. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I4c9df200ba3ec5f315ad3d184588551d29fa68ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/75212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-03-20mb/asrock/b75pro3-m/devicetree.cb: Fix errors for PNP 2e.308Fabian Groffen
[ERROR] PNP: 002e.308 60 io size: 0x0000000008 not assigned in devicetree [ERROR] ERROR: Resource didn't fit!!! PNP: 002e.308 60 * size: 0x8 limit: fff io Configure GPIO pins like asrock/h77pro4-m, this resolves the error and makes CPU-fan readings work. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: If717d046d9f60ca66d1e33db59ad67d23c393376 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-20mb/asrock/b75pro3-m/devicetree.cb: Silence errors for PNP 2e.bFabian Groffen
[ERROR] PNP: 002e.b 62 io size: 0x0000000002 not assigned in devicetree [ERROR] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree Set them to zero. This is also what the values are set to using vendor firmware 1.90. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ide5980224f042e3da289aa28a18042ee8505d943 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73812 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-20mb/asrock/b75pro3-m: Disable unused ME KT PCI deviceFabian Groffen
Resolve this message: [INFO ] PCI: Static device PCI: 00:16.3 not found, disabling it. The ME KT is very unlikely to exist on a consumer device as it is only used in combination with Intel AMT. AMT comes only with the corporate ME variant, whilst this mainboard is consumer grade. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ie1f0bad276f5c124d8d52772330982bf1342c72e Reviewed-on: https://review.coreboot.org/c/coreboot/+/73811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-09mb/asrock/b75pro3-m: Advertise RTL NIC as onboard ethernet deviceFabian Groffen
Move the onboard Realtek NIC definition to a child device of PCIe port 6. This makes sure it is advertised as "onboard", such that it appears as eno0 on systemd/udev-based systems. This commit is very similar to https://review.coreboot.org/c/coreboot/+/73516 Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-05mb/asrock/b75pro3-m: Fix S3 resume and hardware monitoringKevin Keijzer
On the ASRock B75 Pro3-M, resuming from S3 has always been broken; see commit 928c6c6336f2 (mainboard/asrock: add ASRock B75 Pro3-M). This was because 3VSBSW# was not enabled during S3, causing the board to reboot instead of resume. This change enables 3VSBSW# during S3, which leads to S3 resume working normally. Another issue with this board was that hardware monitoring was not working. The nct6775 Linux kernel module could not be loaded, due to the device having a base I/O port of 0. This change also enables the Super I/O properly, so that sensors-detect can find the sensor and the kernel module can be used. Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450 Reviewed-by: Fabian Groffen <grobian@gentoo.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07tree: Drop repeated wordsAlexander Goncharov
Found-by: linter Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b Signed-off-by: Alexander Goncharov <chat@joursoir.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-04mb/*: Replace SNB PCI devices with references from chipset.cbArthur Heymans
Removing default on/off from mainboard devicetrees is left as a follow-up. Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-11-30nb/intel/sandybridge: Add a chipset devicetreeArthur Heymans
This only moves CPU configuration to a common place. Other PCI devices can be done in follow-ups. Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-04sb/intel: Use `bool` for PCIe coalescing optionAngel Pons
Retype the `pcie_port_coalesce` devicetree options and related variables to better reflect their bivalue (boolean) nature. Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device domain 0x0 on`Angel Pons
Most boards use `device domain 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device cpu_cluster 0x0 on`Angel Pons
Most boards use `device cpu_cluster 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-06cpu/intel/model_206ax: Rename `cX_acpower` optionsAngel Pons
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Unify ACPI C-state optionsAngel Pons
All mainboards use the same values for AC and battery, even desktop boards without a battery. Use the AC values everywhere and drop the battery values. Subsequent commits will rename the AC power options accordingly, and will also clean up the corresponding acpigen code. This is intentional so as to ease reviewing the devicetree changes. Also update util/autoport accordingly. Change-Id: I581dc9b733d1f3006a4dc81d8a2fec255d2a0a0f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08nb/intel/sandybridge: Use an enum for `gpu_panel_port_select`Angel Pons
All boards currently have backlight on either LVDS or eDP. Change-Id: I878bc7f1ff75a2b82b9556e855aff1d4d03e0268 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10src/mainboard: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18mainboard/[a-f]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I57fc98788bb47df16d6aedd0f0701e9991801743 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-03-03LGA1155 mainboards: Remove gfx.did and gfx.ndidAngel Pons
They are downright useless and result in ACPI errors. So, burn them. Also, do a minor update to autoport's README about these values. Change-Id: Idb5832cfd2e3043b8d70e13cbbe8bd94ad613120 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-19sb/intel/{bd82x6x|ibexpeak}: Drop p_cnt_throttling_supportedPatrick Rudolph
The processor P_BLK doesn't support throttling. This behaviour could be emulated with SMM, but instead just update the FADT to indicate no support for legacy I/O based throttling using P_CNT. We have _PTC defined in SSDT, which should be used in favour of P_CNT by ACPI aware OS, so this change has no effect on modern OS. Drop all occurences of p_cnt_throttling_supported and update autoport to not generate it any more. Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24cpu/intel/model_206ax: Remove the notion of socketsArthur Heymans
With the memory controller the separate sockets becomes a useless distinction. They all used the same code anyway. UNTESTED: This also updates autoport. Change-Id: I044d434a5b8fca75db9eb193c7ffc60f3c78212b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31031 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/*/*/devicetree.cb: Make sandybridge devicetree uniformArthur Heymans
This is a merely cosmetic change. Change-Id: If36419fbee9628b591116604bf32fe00a4f08c17 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-04-30asrock/b75pro3-m: use the ASPM blacklist driverIru Cai
After commit 2188f57a (src/device: Update LTR configuration scheme) coreboot will hang when reading resources on the ASMedia SATA controller, although there is already an ASPM config override. So use the ASPM blacklist driver instead of setting the ASPM override in the devicetree. Change-Id: I807d9bd4deef8c1528dff96c7646240ef75e1953 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/25819 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21mainboard/asrock: add ASRock B75 Pro3-MIru Cai
Tested: - i5-3550 and DIMM configurations: 2+0+2+2, 0+2+2+2, 2+2+2+2, 4+2+4+2 - debug output from serial port, EHCI debug port not found - Arch Linux (Linux 4.11.5) loaded from SeaBIOS, GRUB2, and Linux payload - all PCI and PCI Express slots Issues: - sometimes the machine fails to boot, with serial debug output it can be seen it stucks after SMM initialization, and more likely to fail to boot when serial cable is attached - no S3 resume (not tested in vendor firmware) Change-Id: I94fbfcee06921538b32aa3c23efa642e7e405ef6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 03:13:23 +0000