summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock/939a785gmh
AgeCommit message (Expand)Author
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
2010-11-17This problem was introduced withTobias Diedrich
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
2010-11-07DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4Scott Duplichan
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
2010-10-24Running a checked build of Windows is needed for understanding its various BI...Scott Duplichan
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
2010-10-01ICS951462_ADDRESS defined but _never_ used. Drop it.Patrick Georgi
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
2010-09-22 Here is a proposed way how to handle the SATA PHY settings on SB700. It Rudolf Marek
2010-09-07Remove unused ide0_enable and sata0_enable entries from SB7xx Rudolf Marek
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-27drop three unneeded config variables:Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-17Attached patch removes unnecessary IRQ routing info (for ACPI, mptable etc ne...Rudolf Marek
2010-08-17Tilapila supports both dual slot and single slot. The difference should beWang Qing Pei
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-26Make include paths more consistent. Fixes compilation errors for me.Myles Watson
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-05-21Add "reasonable" values in ASL at places we overwrite fromStefan Reinauer
2010-05-20Move generation of mptable entries for ISA to generic code.Patrick Georgi
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
2010-04-16zero warnings days: unify mp tables. fix warnings.Stefan Reinauer
2010-04-15zero warnings days...Stefan Reinauer
2010-04-14Remove few more warnings and some dead code.Myles Watson
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-09We don't define LB_CKS_* per board anymore:Patrick Georgi
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-09Copy acpi blobs in two parts to make sure gcc does the right thing.Myles Watson
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-07- copy_and_run() gets the same calling convention on AMD and on all the others.Stefan Reinauer
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-07no duplicate names in cmos.layout.Stefan Reinauer
2010-04-05Signed-off-by: Rudolf Marek <r.marek@assembler.cz>Rudolf Marek
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:08:03 +0000