|
Currently, the 3rdparty/fsp submodule contains only the IoT FSP for
ADL-N. However, coreboot's Kconfig is incorrectly applying the IoT
FSP for both Client and IoT configurations, despite the Client FSP
requiring distinct headers.
The aoostar/wtr_r1 board relies on the FSP provided by the 3rdparty/fsp
submodule, which means it has been using the IoT FSP by default. To
ensure the board continues to use the correct FSP as we plan to
introduce Client FSP headers into vendorcode, we are now explicitly
select FSP_TYPE_IOT for the aoostar/wtr_r1 board.
Change-Id: I68feeaaffd825013ae1012694047b067535e7341
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82914
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with
two 3.5" HDD slots, an M.2 NVMe 2280 SSD slot and a single DDR4-3200
SODIMM slot up to 32GB. It also comes with 2x 2.5Gb Intel NICs,
Intel AX200 WiFi + BT and USB-C Alt-DP Power Delivery.
Working:
- DDR4 RAM (tested with Crucial 16GB 3200MHz CL22)
- Automatic FAN control (IT8613E Super I/O)
- M.2 NVME slot
- 2x SATA ports (Issue on 3.5" HDD, see below)
- USB 2.0 ports
- USB 3.0 ports
- USB-C port with Alt-DP and PD
- HDMI / DisplayPort ports
- 2x 2.5Gb NICs
- WiFi + BT
- MicroSD card reader
- ASPM (Unavailable on stock)
- Linux (Arch Linux, kernel 6.8.7-arch1-1) UEFI booting with EDK2
- Windows 10 UEFI booting with EDK2
Broken:
- Power button (OFF->ON broken, ON->OFF works)
- 3.5" SATA HDDs (Detected only after reboot)
Untested:
- Internal audio
- S3
My motivation for doing this port is enabling ASPM, as it makes a
great difference on idle power consumption (from 8.4W to 5W measured
from the wall).
The last remaining annoyance of this port is the power button not
working. I spent a few hours double checking the Super I/O registers but
then I gave up. A workaround for this is to use the "ON after power
loss" feature and reconnect the power cord to turn on the board.
It's not a big problem for a NAS that will stay ON 24/7.
Any hint on the power button or 3.5" HDD issue is welcome.
VBT extracted from vendor UEFI firmware version 1AXFE 0.01 x64
(Build date and time 11/29/2023 10:57:44)
Compiled with FSP GOP video initialization, using IFD descriptor
and ME blob extracted from vendor UEFI firmware (see above).
The board can be flashed externally using a 1.8V adapter, I used a
CH341a modded for 3.3V I/O. Internal flashing works, as flash is
not read/write protected.
Patchset 5: Re-enabled dptf, added default options to Kconfig.
Patchset 7: Configured USB port mapping and overcurrent, USB3.0 works
Patchset 8: Fixed microSD card reader
Patchset 13: Change Super I/O Fan configuration to reduce fan noise
Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82010
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
