Age | Commit message (Expand) | Author |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-25 | Trivial. The comment also need to modify. | Zheng Bao |
2010-04-25 | The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12. | Zheng Bao |
2010-04-23 | AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board. | Zheng Bao |
2010-04-22 | fix compilation remaining geode boards | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-16 | zero warnings days: unify mp tables. fix warnings. | Stefan Reinauer |
2010-04-15 | remove more warnings. move ROOT_COMPLEX selection to fam10 | Stefan Reinauer |
2010-04-15 | zero warnings days... | Stefan Reinauer |
2010-04-15 | Remove a few more warnings from fam10. | Myles Watson |
2010-04-14 | Remove few more warnings and some dead code. | Myles Watson |
2010-04-14 | drop quite a lot of dead code that did nothing but produce warnings and make | Stefan Reinauer |
2010-04-09 | remove some amd mainboard warnings. | Stefan Reinauer |
2010-04-09 | copy_and_run.c is not needed twice, and it is used on non-car too. | Stefan Reinauer |
2010-04-09 | Copy acpi blobs in two parts to make sure gcc does the right thing. | Myles Watson |
2010-04-08 | Clean up fidvid files using indent. | Myles Watson |
2010-04-08 | Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so... | Myles Watson |
2010-04-07 | move amd K8/Fam10 "bus detection" function prototypes to a common place. | Stefan Reinauer |
2010-04-06 | No warnings day, next round. | Stefan Reinauer |
2010-04-02 | remove some more warnings | Stefan Reinauer |
2010-04-01 | -Â get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files. | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-31 | This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c and | Stefan Reinauer |
2010-03-30 | - drop unneeded Makefile.inc | Stefan Reinauer |
2010-03-30 | drop USE_INIT from mainboard Kconfig files, it's already set in src/Kconfig | Stefan Reinauer |
2010-03-30 | unify cmos.layout wrt AMD extended configuration registers. | Stefan Reinauer |
2010-03-29 | This drops the ASSEMBLY define from romstage.c, too | Stefan Reinauer |
2010-03-29 | __PRE_RAM__ is now correctly specified in the Makefile. No need to hack it into | Stefan Reinauer |
2010-03-29 | This patch drops the coreboot CMOS checksum ranges from Kconfig because | Stefan Reinauer |
2010-03-29 | dualcore.h and quadcore.h are almost exactly the same. | Stefan Reinauer |
2010-03-28 | drop unneeded __ROMCC__ checks when the check for __PRE_RAM__ is more | Stefan Reinauer |
2010-03-26 | Remove dead code and make white space more consistent for acpi_tables.c | Myles Watson |
2010-03-26 | 1. Remove warnings and multiple blank lines. | Zheng Bao |
2010-03-24 | Get rid of type-punned pointer errors. | Myles Watson |
2010-03-23 | mahogany_fam10: rename apc_auto.c to ap_romstage.c like on all other boards | Stefan Reinauer |
2010-03-22 | Revert my debugging patch that got committed by accident. Sorry. | Myles Watson |
2010-03-22 | Fix all the format string warnings. | Myles Watson |
2010-03-22 | printk_foo -> printk(BIOS_FOO, ...) | Stefan Reinauer |
2010-03-18 | Remove remaining uses of | Patrick Georgi |
2010-03-18 | Rework boolean expression (DeMorgan and all) for | Patrick Georgi |
2010-03-18 | Remove fallback/normal handling in mainboards' | Patrick Georgi |
2010-03-17 | Remove failover/fallback/normal handling in mainboards' | Patrick Georgi |
2010-03-17 | trivial warning fixes, mostly for ACPI code | Stefan Reinauer |
2010-03-16 | Add entries of RS780, SB700, Mahogany, Mahogany_fam10 into the | Zheng Bao |
2010-03-16 | The code can run on the Mahogany board, which is one of sample boards | Zheng Bao |
2010-03-16 | 1. Features of mahogany. | Zheng Bao |
2010-03-11 | Replace clear_memory with memset. | Myles Watson |
2010-03-05 | This patch is from 2009-10-20 | Uwe Hermann |
2010-03-01 | Drop unused doit.sh files (trivial). | Uwe Hermann |
2010-03-01 | - Add rules that build either 4 or 5 ssdts (only those variants exist in the ... | Patrick Georgi |
2010-02-28 | disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job, | Stefan Reinauer |
2010-02-28 | - Add config flag for boards that have their own fadt.c | Patrick Georgi |
2010-02-27 | - make HAVE_HARD_RESET match what newconfig did | Patrick Georgi |
2010-02-25 | Move the ldscripts logic to src/arch/i386/Makefile.inc | Patrick Georgi |
2010-02-25 | Unify crt0s setup to src/arch/i386/Makefile.inc. This variable | Patrick Georgi |
2010-02-23 | Only handle code as "driver" that actually uses our driver | Patrick Georgi |
2010-02-22 | fix builds... | Stefan Reinauer |
2010-02-15 | Various license header consistency fixes (trivial). | Uwe Hermann |
2010-02-09 | Actually set HAVE_OPTION_TABLES for the boards that need it. | Patrick Georgi |
2010-02-09 | Move all the copies of the romstage.inc rule to | Patrick Georgi |
2010-02-09 | Port of CS5536 early UART setup from v3. | Edwin Beasant |
2010-02-08 | Clean up ACPI: | Patrick Georgi |
2010-02-08 | straighten naming scheme for application processor rom stage files. | Stefan Reinauer |
2010-02-08 | janitor task: unify and cleanup naming. | Stefan Reinauer |
2010-02-07 | fix further build.h dependencies that were undetected before we enabled it on | Stefan Reinauer |
2010-02-07 | newconfig is no more. | Patrick Georgi |
2010-02-04 | Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU. | Stefan Reinauer |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-26 | - Clean up and comment writing of MSRs for cache control (Backport from v3) | Edwin Beasant |
2010-01-25 | Fix ACPI build on a couple of boards (now that it's active) | Patrick Georgi |
2010-01-25 | More Kconfig changes to improve match with newconfig: | Patrick Georgi |
2010-01-25 | Align several kconfig options to match newconfig: | Patrick Georgi |
2010-01-18 | Move all IOAPIC selection to southbridges, and remove them | Patrick Georgi |
2010-01-16 | coreboot used to have two different "APIs" for memory accesses: | Stefan Reinauer |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2009-12-31 | romcc: | Patrick Georgi |
2009-12-18 | Clean up amd/dbm690t and kontron/986lcd-m some more (not | Patrick Georgi |
2009-11-27 | Eliminate special case id.inc/id.lds in favor of a configuration variable ID_... | Patrick Georgi |
2009-11-27 | Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID | Patrick Georgi |
2009-11-06 | Remove drivers/pci/onboard. The only purpose was for option ROMs, which are | Myles Watson |
2009-11-06 | Remove some white space and comment differences from devicetree.cb and Config.lb | Myles Watson |
2009-11-06 | Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb. | Uwe Hermann |
2009-11-06 | Split the two usages of __ROMCC__: | Myles Watson |
2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
2009-10-24 | move all register fram definitions to arch/register.h | Stefan Reinauer |
2009-10-23 | Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before | Myles Watson |
2009-10-20 | Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be | Myles Watson |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-19 | Fix builds of amd/db800 and digitallogic/msm800sev with smaller bootblocks. | Myles Watson |
2009-10-18 | Simplify Kconfig files by using "select" where possible (trivial). | Uwe Hermann |
2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
2009-10-16 | Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE. | Myles Watson |
2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
2009-10-16 | Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE. | Myles Watson |
2009-10-16 | Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise the | Zheng Bao |
2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
2009-10-12 | Make fam10 build (but not boot due to bootblock size problems.) | Myles Watson |
2009-10-11 | HAVE_ACPI_TABLES cleanups for kconfig: | Uwe Hermann |
2009-10-09 | Add const to get rid of some warnings when passing quoted strings. | Myles Watson |