Age | Commit message (Expand) | Author |
2010-09-28 | Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings. | Myles Watson |
2010-09-27 | I missed these boards in a previous commit. | Warren Turkal |
2010-09-27 | All these boards already had the CACHE_AS_RAM option in their individual | Warren Turkal |
2010-09-25 | Drop some useless "../../../" in #includes (trivial). | Uwe Hermann |
2010-09-25 | - Fix race condition in option_table.h generation by moving the include | Stefan Reinauer |
2010-09-24 | Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure. | Uwe Hermann |
2010-09-21 | Cut the crap. | Uwe Hermann |
2010-09-10 | Move memory type information out of some AMD sockets. | Myles Watson |
2010-09-07 | Remove unused ide0_enable and sata0_enable entries from SB7xx | Rudolf Marek |
2010-09-07 | Set up an arbitrary amount of system memory on Geode LX, so | Aurelien Guillaume |
2010-09-02 | Revert 5762. It silently broke a lot of boards because abuild was broken. | Myles Watson |
2010-09-01 | Fix race condition in option_table.h generation by moving the include statement | Stefan Reinauer |
2010-08-30 | We call this cache as ram everywhere, so let's call it the same in Kconfig | Stefan Reinauer |
2010-08-30 | Restructured all vendors' Kconfig files to no longer source the boards' | Jens Rottmann |
2010-08-27 | drop three unneeded config variables: | Jens Rottmann |
2010-08-26 | Remove unused mainboard_config definitions. Trivial. | Myles Watson |
2010-08-17 | Tilapila supports both dual slot and single slot. The difference should be | Wang Qing Pei |
2010-08-17 | Whatever happened here,... The DEC Tulip is a network card, no bridge of any | Stefan Reinauer |
2010-08-03 | Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / | Stefan Reinauer |
2010-07-28 | Let Geode GX2 use geode_post_code.h just like Geode LX | Nils Jacobs |
2010-07-26 | This patch converts the Geode GX2 boards to CAR. | Nils Jacobs |
2010-07-26 | Make include paths more consistent. Fixes compilation errors for me. | Myles Watson |
2010-07-08 | Ugly temporary fix until we figure out how to deal with the race condition. | Myles Watson |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-06-10 | This commit updates the Geode LX GLCP delay control setup from the v2 way to ... | Edwin Beasant |
2010-06-10 | The devicetree was wrong, but I'm still surprised it broke. This fixes the | Myles Watson |
2010-05-25 | Move CS5535 specific setup from GX2 driver to CS5535. | Stefan Reinauer |
2010-05-21 | Add "reasonable" values in ASL at places we overwrite from | Stefan Reinauer |
2010-05-20 | Move generation of mptable entries for ISA to generic code. | Patrick Georgi |
2010-05-14 | Remove another set of includes from Fam10 romstages: | Patrick Georgi |
2010-05-14 | license header fixes | Nils Jacobs |
2010-05-09 | Remove pc80/serial.c includes in ROMCC boards and include | Patrick Georgi |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-25 | Trivial. The comment also need to modify. | Zheng Bao |
2010-04-25 | The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12. | Zheng Bao |
2010-04-23 | AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board. | Zheng Bao |
2010-04-22 | fix compilation remaining geode boards | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-16 | zero warnings days: unify mp tables. fix warnings. | Stefan Reinauer |
2010-04-15 | remove more warnings. move ROOT_COMPLEX selection to fam10 | Stefan Reinauer |
2010-04-15 | zero warnings days... | Stefan Reinauer |
2010-04-15 | Remove a few more warnings from fam10. | Myles Watson |
2010-04-14 | Remove few more warnings and some dead code. | Myles Watson |
2010-04-14 | drop quite a lot of dead code that did nothing but produce warnings and make | Stefan Reinauer |
2010-04-09 | remove some amd mainboard warnings. | Stefan Reinauer |
2010-04-09 | copy_and_run.c is not needed twice, and it is used on non-car too. | Stefan Reinauer |
2010-04-09 | Copy acpi blobs in two parts to make sure gcc does the right thing. | Myles Watson |
2010-04-08 | Clean up fidvid files using indent. | Myles Watson |
2010-04-08 | Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so... | Myles Watson |
2010-04-07 | move amd K8/Fam10 "bus detection" function prototypes to a common place. | Stefan Reinauer |
2010-04-06 | No warnings day, next round. | Stefan Reinauer |
2010-04-02 | remove some more warnings | Stefan Reinauer |
2010-04-01 | -Â get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files. | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-31 | This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c and | Stefan Reinauer |
2010-03-30 | - drop unneeded Makefile.inc | Stefan Reinauer |
2010-03-30 | drop USE_INIT from mainboard Kconfig files, it's already set in src/Kconfig | Stefan Reinauer |
2010-03-30 | unify cmos.layout wrt AMD extended configuration registers. | Stefan Reinauer |
2010-03-29 | This drops the ASSEMBLY define from romstage.c, too | Stefan Reinauer |
2010-03-29 | __PRE_RAM__ is now correctly specified in the Makefile. No need to hack it into | Stefan Reinauer |
2010-03-29 | This patch drops the coreboot CMOS checksum ranges from Kconfig because | Stefan Reinauer |
2010-03-29 | dualcore.h and quadcore.h are almost exactly the same. | Stefan Reinauer |
2010-03-28 | drop unneeded __ROMCC__ checks when the check for __PRE_RAM__ is more | Stefan Reinauer |
2010-03-26 | Remove dead code and make white space more consistent for acpi_tables.c | Myles Watson |
2010-03-26 | 1. Remove warnings and multiple blank lines. | Zheng Bao |
2010-03-24 | Get rid of type-punned pointer errors. | Myles Watson |
2010-03-23 | mahogany_fam10: rename apc_auto.c to ap_romstage.c like on all other boards | Stefan Reinauer |
2010-03-22 | Revert my debugging patch that got committed by accident. Sorry. | Myles Watson |
2010-03-22 | Fix all the format string warnings. | Myles Watson |
2010-03-22 | printk_foo -> printk(BIOS_FOO, ...) | Stefan Reinauer |
2010-03-18 | Remove remaining uses of | Patrick Georgi |
2010-03-18 | Rework boolean expression (DeMorgan and all) for | Patrick Georgi |
2010-03-18 | Remove fallback/normal handling in mainboards' | Patrick Georgi |
2010-03-17 | Remove failover/fallback/normal handling in mainboards' | Patrick Georgi |
2010-03-17 | trivial warning fixes, mostly for ACPI code | Stefan Reinauer |
2010-03-16 | Add entries of RS780, SB700, Mahogany, Mahogany_fam10 into the | Zheng Bao |
2010-03-16 | The code can run on the Mahogany board, which is one of sample boards | Zheng Bao |
2010-03-16 | 1. Features of mahogany. | Zheng Bao |
2010-03-11 | Replace clear_memory with memset. | Myles Watson |
2010-03-05 | This patch is from 2009-10-20 | Uwe Hermann |
2010-03-01 | Drop unused doit.sh files (trivial). | Uwe Hermann |
2010-03-01 | - Add rules that build either 4 or 5 ssdts (only those variants exist in the ... | Patrick Georgi |
2010-02-28 | disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job, | Stefan Reinauer |
2010-02-28 | - Add config flag for boards that have their own fadt.c | Patrick Georgi |
2010-02-27 | - make HAVE_HARD_RESET match what newconfig did | Patrick Georgi |
2010-02-25 | Move the ldscripts logic to src/arch/i386/Makefile.inc | Patrick Georgi |
2010-02-25 | Unify crt0s setup to src/arch/i386/Makefile.inc. This variable | Patrick Georgi |
2010-02-23 | Only handle code as "driver" that actually uses our driver | Patrick Georgi |
2010-02-22 | fix builds... | Stefan Reinauer |
2010-02-15 | Various license header consistency fixes (trivial). | Uwe Hermann |
2010-02-09 | Actually set HAVE_OPTION_TABLES for the boards that need it. | Patrick Georgi |
2010-02-09 | Move all the copies of the romstage.inc rule to | Patrick Georgi |
2010-02-09 | Port of CS5536 early UART setup from v3. | Edwin Beasant |
2010-02-08 | Clean up ACPI: | Patrick Georgi |
2010-02-08 | straighten naming scheme for application processor rom stage files. | Stefan Reinauer |
2010-02-08 | janitor task: unify and cleanup naming. | Stefan Reinauer |
2010-02-07 | fix further build.h dependencies that were undetected before we enabled it on | Stefan Reinauer |
2010-02-07 | newconfig is no more. | Patrick Georgi |