summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
AgeCommit message (Expand)Author
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
2010-09-25- Fix race condition in option_table.h generation by moving the includeStefan Reinauer
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
2010-09-21Cut the crap.Uwe Hermann
2010-09-10Move memory type information out of some AMD sockets.Myles Watson
2010-09-07Remove unused ide0_enable and sata0_enable entries from SB7xx Rudolf Marek
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
2010-09-02Revert 5762. It silently broke a lot of boards because abuild was broken.Myles Watson
2010-09-01Fix race condition in option_table.h generation by moving the include statementStefan Reinauer
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-27drop three unneeded config variables:Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-17Tilapila supports both dual slot and single slot. The difference should beWang Qing Pei
2010-08-17Whatever happened here,... The DEC Tulip is a network card, no bridge of anyStefan Reinauer
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
2010-07-26Make include paths more consistent. Fixes compilation errors for me.Myles Watson
2010-07-08Ugly temporary fix until we figure out how to deal with the race condition.Myles Watson
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ...Edwin Beasant
2010-06-10The devicetree was wrong, but I'm still surprised it broke. This fixes theMyles Watson
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
2010-05-21Add "reasonable" values in ASL at places we overwrite fromStefan Reinauer
2010-05-20Move generation of mptable entries for ISA to generic code.Patrick Georgi
2010-05-14Remove another set of includes from Fam10 romstages:Patrick Georgi
2010-05-14license header fixes Nils Jacobs
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
2010-04-25Trivial. The comment also need to modify.Zheng Bao
2010-04-25The device number of SATA SB700 is 0x11, while the one of SB600 is 0x12.Zheng Bao
2010-04-23AMD Tilapia board support as a demonstration of an AMD Fam10 DDR3 board.Zheng Bao
2010-04-22fix compilation remaining geode boardsStefan Reinauer
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
2010-04-16zero warnings days: unify mp tables. fix warnings.Stefan Reinauer
2010-04-15remove more warnings. move ROOT_COMPLEX selection to fam10Stefan Reinauer
2010-04-15zero warnings days...Stefan Reinauer
2010-04-15Remove a few more warnings from fam10.Myles Watson
2010-04-14Remove few more warnings and some dead code.Myles Watson
2010-04-14drop quite a lot of dead code that did nothing but produce warnings and makeStefan Reinauer
2010-04-09remove some amd mainboard warnings.Stefan Reinauer
2010-04-09copy_and_run.c is not needed twice, and it is used on non-car too.Stefan Reinauer
2010-04-09Copy acpi blobs in two parts to make sure gcc does the right thing.Myles Watson
2010-04-08Clean up fidvid files using indent.Myles Watson
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-07move amd K8/Fam10 "bus detection" function prototypes to a common place.Stefan Reinauer
2010-04-06No warnings day, next round.Stefan Reinauer
2010-04-02remove some more warningsStefan Reinauer
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-30- drop unneeded Makefile.incStefan Reinauer
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
2010-03-30unify cmos.layout wrt AMD extended configuration registers.Stefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-29This patch drops the coreboot CMOS checksum ranges from Kconfig becauseStefan Reinauer
2010-03-29dualcore.h and quadcore.h are almost exactly the same. Stefan Reinauer
2010-03-28drop unneeded __ROMCC__ checks when the check for __PRE_RAM__ is moreStefan Reinauer
2010-03-26Remove dead code and make white space more consistent for acpi_tables.cMyles Watson
2010-03-261. Remove warnings and multiple blank lines.Zheng Bao
2010-03-24Get rid of type-punned pointer errors.Myles Watson
2010-03-23mahogany_fam10: rename apc_auto.c to ap_romstage.c like on all other boardsStefan Reinauer
2010-03-22Revert my debugging patch that got committed by accident. Sorry.Myles Watson
2010-03-22Fix all the format string warnings.Myles Watson
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-18Remove remaining uses ofPatrick Georgi
2010-03-18Rework boolean expression (DeMorgan and all) forPatrick Georgi
2010-03-18Remove fallback/normal handling in mainboards'Patrick Georgi
2010-03-17Remove failover/fallback/normal handling in mainboards'Patrick Georgi
2010-03-17trivial warning fixes, mostly for ACPI codeStefan Reinauer
2010-03-16Add entries of RS780, SB700, Mahogany, Mahogany_fam10 into theZheng Bao
2010-03-16The code can run on the Mahogany board, which is one of sample boardsZheng Bao
2010-03-161. Features of mahogany.Zheng Bao
2010-03-11Replace clear_memory with memset.Myles Watson
2010-03-05This patch is from 2009-10-20Uwe Hermann
2010-03-01Drop unused doit.sh files (trivial).Uwe Hermann
2010-03-01- Add rules that build either 4 or 5 ssdts (only those variants exist in the ...Patrick Georgi
2010-02-28disable AP_CODE_IN_CAR. The K8 code has an alternate code path to do the job,Stefan Reinauer
2010-02-28- Add config flag for boards that have their own fadt.cPatrick Georgi
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
2010-02-22fix builds...Stefan Reinauer
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
2010-02-09Actually set HAVE_OPTION_TABLES for the boards that need it.Patrick Georgi
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-09Port of CS5536 early UART setup from v3.Edwin Beasant
2010-02-08Clean up ACPI:Patrick Georgi
2010-02-08straighten naming scheme for application processor rom stage files.Stefan Reinauer
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07fix further build.h dependencies that were undetected before we enabled it on Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-02-04Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU.Stefan Reinauer
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
2010-01-26- Clean up and comment writing of MSRs for cache control (Backport from v3)Edwin Beasant