| Age | Commit message (Collapse) | Author |
|---|
|
Kconfig directives to select chip drivers for compile literally
match the chip directory names capitalized and underscored.
Rename directories and Kconfig as follows:
model_lx -> geode_lx
model_gx1 -> geode_gx1
model_gx2 -> geode_gx2
Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is Abuild and boot tested.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.
This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)
The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.
All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.
Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.
Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Warren Turkal <wt@penguintechs.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Kconfigs from within the choice/endchoice block. This makes it possible to
define user visible board specific options. Moved all vendor names and PCI
ids to the vendors' Kconfigs. Now all options in each file depend on the same
symbol, so replaced all "depends on"s with a single "if". Sorted boards
(sort -d), cleaned whitespace.
This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is
always "y" and never used. It it simply needed to have something to attach
the boards' "select" statements to.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
board porter: printk should always be available in CAR mode.
Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board
but it's not been used there. Very odd.
There is one usage of CONFIG_USE_INIT which was always off in
src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with
those few lines.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5669 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com>
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
src/arch/i386/Makefile.inc
For that to work, I had to:
- Add a CONFIG_ROMCC variable
- Set that variable on all ROMCC boards
- conditionally choose romcc or gcc rule based on that variable
- remove those two rules from all the boards' Makefiles
- switch a couple of boards to HAVE_OPTION_TABLE, as they actually have.
Also remove the duplication of rules with the sole difference of if
they depend on option_table.h or not.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
HT_CHAIN_UNITID_BASE
HT_CHAIN_END_UNITID_BASE
SB_HT_CHAIN_ON_BUS0
SB_HT_CHAIN_UNITID_OFFSET_ONLY
MAX_CPUS
MAX_PHYSICAL_CPUS
ROM_SIZE
TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
Also hook up asus/p2b-ds
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
with the respective board.
Of course, the user can still override the size in menuconfig.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
per discussion on the mailing list.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Also, simplify the M2V-MX SE Kconfig file a bit while I'm at it.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4688 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Kconfig_bools.diff: Change some more ints to bools, change some default values.
xip_size.diff: Make XIP_SIZE + XIP_BASE add up to 4GB.
smp.diff: set CONFIG_SMP based on MAX_CPUS.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
tested. I also addressed questions raised by Uwe:
TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
UDELAY_TSC
Are now defined as booleans in src/cpu/x86/Kconfig and can be selected in
the mainboard Kconfig. The remaining question of Uwe's is a deeper
problem:
---
We'll have to check if this works. From a quick glance
the Rumba does not have the mmx related lines (which _are_ in
Makefile.romccboard.inc, though):
crt0-y += ../../../../src/cpu/x86/fpu/enable_fpu.inc
crt0-y += ../../../../src/cpu/x86/mmx/enable_mmx.inc
crt0-y += auto.inc
crt0-y += ../../../../src/cpu/x86/mmx/disable_mmx.inc
---
We're going to need a whole variant of this standard mainboard OR
we're going to have to make (some) of the unconditional includes above
conditional.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
remove Config variables now defined elsewhere.
add rumba Kconfig and Makefile.inc
rumba won't build until my earlier patches are acked.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4617 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
