Age | Commit message (Expand) | Author |
2017-04-10 | nb/amdk8/(pre_)f.h: Don't declare global variable in header | Arthur Heymans |
2016-12-26 | amd-based mainboards: Fix whitespace in _PTS comments | Marshall Dawson |
2016-12-06 | cpu/amd/mtrr.h: Drop excessive includes | Kyösti Mälkki |
2016-12-06 | cpu/x86/msr.h: Drop excessive includes | Kyösti Mälkki |
2016-10-01 | mainboard/*/*/*/usb.asl: Use tabs for indents | Elyes HAOUAS |
2016-09-20 | src/mainboard/a-trend - emulation: Add space around operators | Elyes HAOUAS |
2016-08-17 | mainboard: Clean up boot_option/reboot_bits in cmos.layout | Nico Huber |
2016-08-14 | src/mainboard: Capitalize ROM, RAM, CPU and APIC | Elyes HAOUAS |
2016-07-31 | mainboard: Format irq_tables.c | Paul Menzel |
2015-12-16 | southbridge/amd/sb600: Update HPET base address with #define | Martin Roth |
2015-12-10 | ACPI: Work around IASL warning reading/writing same register | Martin Roth |
2015-12-10 | ACPI: Fix IASL Warning about unused method for _OSI check | Martin Roth |
2015-11-10 | mainboard/**/irq_tables.c: Remove reference to getpir | Patrick Georgi |
2015-11-05 | mainboard: Remove last_boot NVRAM option | Timothy Pearson |
2015-10-31 | tree: drop last paragraph of GPL copyright header | Patrick Georgi |
2015-10-29 | mainboard: Convert #ifdef to IS_ENABLED in get_bus_conf.c | Timothy Pearson |
2015-06-08 | Remove empty lines at end of file | Elyes HAOUAS |
2015-06-05 | AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0 | Kyösti Mälkki |
2015-05-21 | Remove address from GPLv2 headers | Patrick Georgi |
2015-04-18 | kconfig: automatically include mainboards | Stefan Reinauer |
2015-02-16 | acpi: Generate valid ACPI processor objects | Timothy Pearson |
2015-02-16 | mainboard/cmos: Kill off unused boot_* parameters | Timothy Pearson |
2015-02-16 | mainboard/cmos: Move ECC variables out of fallback mechanism byte | Timothy Pearson |
2015-02-16 | mainboard/cmos: Delete obsolete commented parameters | Timothy Pearson |
2015-02-15 | x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer | Kevin Paul Herbert |
2015-01-06 | mainboard: Drop print_ implementation from non-romcc boards | Stefan Reinauer |
2015-01-06 | mainboard/*/romstage.c: Fix 'lib/delay.c' inclusion | Edward O'Callaghan |
2015-01-06 | mainboard/*/romstage.c: Sanitize system header inclusions | Edward O'Callaghan |
2014-10-19 | amd: rename model_fxx_powernow to powernow. | Vladimir Serbinenko |
2014-10-16 | amdk8: Move to per-device ACPI | Vladimir Serbinenko |
2014-10-16 | ACPI: Remove CONFIG_GENERATE_ACPI_TABLES | Vladimir Serbinenko |
2014-07-18 | mainboard: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-06-26 | AMD boards: Fix typos | Kyösti Mälkki |
2014-06-26 | PIRQ tables: Fix typos | Kyösti Mälkki |
2014-06-14 | amd/agesa,cimx: Rename ACPI OS detection methods | Edward O'Callaghan |
2014-05-28 | superio/ite/it8712f: Depreciate model specific early_serial.c | Edward O'Callaghan |
2014-05-03 | Move ARCH_* from board/Kconfig to cpu or soc Kconfig. | Furquan Shaikh |
2014-04-26 | mainboard/*: Remove DUMP_ACPI_TABLES from amd boards | Edward O'Callaghan |
2014-01-19 | board-status: Add board_info.txt extracted from wiki. | Vladimir Serbinenko |
2013-12-29 | AMD K8 (rev-F): Always have RAMINIT_SYSINFO | Kyösti Mälkki |
2013-12-26 | AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includes | Kyösti Mälkki |
2013-12-26 | AMD boards (non-AGESA): Cleanup earlymtrr.c includes | Kyösti Mälkki |
2013-08-16 | Correct spelling of shadow, setting and memory | Paul Menzel |
2013-08-15 | Include boot_cpu.c for romstage builds | Kyösti Mälkki |
2013-06-24 | AMD: Drop empty root_complex | Kyösti Mälkki |
2013-06-23 | AMD boards: routing.asl: Uniformly start `Package()` with capital letter | Paul Menzel |
2013-03-22 | x86: Unify arch/io.h and arch/romcc_io.h | Stefan Reinauer |
2013-03-01 | GPLv2 notice: Unify all files to just use one space in »MA 02110-1301« | Paul Menzel |
2013-02-25 | AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID field | Paul Menzel |
2013-02-25 | mainboard.c: Name enable_dev function uniformly `mainboard_enable` | Paul Menzel |
2013-02-14 | sconfig: rename lapic_cluster -> cpu_cluster | Stefan Reinauer |
2013-02-14 | sconfig: rename pci_domain -> domain | Stefan Reinauer |
2012-11-28 | amdk8/amdfam10: Use CAR_GLOBAL for sysinfo | Patrick Georgi |
2012-11-27 | Remove AMD special case for LAPIC based udelay() | Patrick Georgi |
2012-11-16 | Drop unneeded BOARD_HAS_FADT option | Stefan Reinauer |
2012-11-16 | Drop CONFIG_HAVE_BUS_CONFIG, clean up Kconfig | Stefan Reinauer |
2012-11-09 | Get rid of hard coded strings in ACPI tables | Stefan Reinauer |
2012-11-06 | Drop redundant CHIP_NAME in mainboard.c | Kyösti Mälkki |
2012-08-08 | Cleanup coreboot memory table includes | Kyösti Mälkki |
2012-08-08 | Drop HAVE_MAINBOARD_RESOURCES | Kyösti Mälkki |
2012-08-07 | Move cpus_ready_for_init() to AMD K8 | Kyösti Mälkki |
2012-08-02 | AMD and GFXUMA: move setup_uma_memory() to northbridge | Kyösti Mälkki |
2012-07-26 | Drop mainboard chip.h | Stefan Reinauer |
2012-07-23 | AMD and GFXUMA: drop redundant use of lb_add_memory_range() | Kyösti Mälkki |
2012-07-16 | Move setup_uma_memory() to K8 northbridge | Kyösti Mälkki |
2012-07-16 | Define global uma_memory variables | Kyösti Mälkki |
2012-05-08 | Clean up #ifs | Patrick Georgi |
2012-04-20 | Refactor some alignment handling | Patrick Georgi |
2012-03-08 | Unify Local APIC address definitions | Patrick Georgi |
2012-02-22 | ACPI: More ../../.. removal | Patrick Georgi |
2012-02-22 | amd/sb600: Move HAVE_HARD_RESET to southbridge | Patrick Georgi |
2011-10-30 | remove usbdebug.h include from mainboard/romstage code | Sven Schnelle |
2011-10-13 | Use default table creator macro for all SSDTs | Stefan Reinauer |
2011-10-13 | mptable: Refactor mptable generation some more | Patrick Georgi |
2011-10-13 | mptable: Get rid of fixup_virtual_wire | Patrick Georgi |
2011-05-20 | Move the ACPI FACP table to the front of the RSDT list. This is done to work ... | Scott Duplichan |
2011-04-20 | run uart_init() from console_init, just like the other console initialization... | Stefan Reinauer |
2011-04-18 | * Set USBDEBUG_DEFAULT_PORT in all southbridges and use that value | Stefan Reinauer |
2011-03-01 | Use subsystem id from devicetree.cb instead of Kconfig and move | Sven Schnelle |
2010-12-16 | Get mptable OEM/product ID from kconfig variables. | Uwe Hermann |
2010-12-11 | After this has been brought up many times before, rename src/arch/i386 to | Stefan Reinauer |
2010-12-09 | Deduplicate various ACPI .asl files. | Uwe Hermann |
2010-12-08 | Move "select CACHE_AS_RAM" lines from boards into CPU socket. | Uwe Hermann |
2010-12-08 | second round name simplification. drop the <component>_ prefix. | stepan |
2010-12-08 | first round name simplification. drop the <component>_ prefix. | stepan |
2010-11-21 | Simplify a few code chunks, fix whitespace and indentation. | Uwe Hermann |
2010-11-21 | Drop excessive whitespace randomly sprinkled in romstage.c files. | Uwe Hermann |
2010-11-21 | Convert boards to use mptable_write_buses. | Patrick Georgi |
2010-11-20 | Unify DIMM SPD addressing. For Geode, change the | Patrick Georgi |
2010-11-18 | Eliminate SET_NB_CFG_54 option. There was no board that | Patrick Georgi |
2010-11-17 | This problem was introduced with | Tobias Diedrich |
2010-11-16 | Move the SET_FIDVID* family of configuration options to Kconfig and | Patrick Georgi |
2010-11-07 | DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4 | Scott Duplichan |
2010-11-05 | Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.c | Patrick Georgi |
2010-10-26 | We need to call smp_write_lintsrc() instead of smp_write_intsrc() for | Tobias Diedrich |
2010-10-25 | Factor out common mptable code to mptable_init(). | Uwe Hermann |
2010-10-24 | Running a checked build of Windows is needed for understanding its various BI... | Scott Duplichan |
2010-10-12 | We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it. | Uwe Hermann |
2010-10-07 | Remove duplicate line from pci_ids.h. | Jonathan Kollasch |
2010-10-05 | - move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1 | Patrick Georgi |