| Age | Commit message (Collapse) | Author |
|---|
|
There are no reasons to not load ramstage @ 0x100000.
Boards with HAVE_ACPI_RESUME enabled have performance penalty in using
excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS.
Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7094
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: If6cb99469f56fff8f88b294b625f0a5205ec540b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7238
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I242664032d368794d828fce73a20f75ded45051d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7151
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Regression introduced with commit
7b23ae0 AGESA: Trace execution with AGESAWRAPPER()
As the call is made before console_init() is called it must
not call any printk(). Debugging Olivehill and Parmer platforms
using a custom FPGA (as these boards have no Super-IO UART) have
been observed to halt and/or delay at early boot.
Change-Id: I3ab4e5378db44aece9046c8636cde1053ce5390d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7059
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
|
|
Change-Id: If973f28931e65a57cbb8d6739542a57c844f0d66
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7115
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove northbridge specific callouts for AGESA_READ_SPD.
Move low-level SMBus code to southbridge.
Change-Id: I3e272389e2a7db542fb48fca8606325af27b65a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7112
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: If5c62b868c4144845d79dc26068c500ab5d26947
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7111
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The only remaining purpose for get_bus_conf() was to fill in obscure
bus_sb800 (etc.) arrays containing partial PCI bus enumeration. Complete
enumeration is available in devicetree and PCI configuration space so
discard these arrays.
Change-Id: I733115940afba3a50c58aedb9a04ecf5082b1234
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6360
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I7fd14c17242cd3deb7a784fc918ad6fe1191bd13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6359
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Previously MP table contained PCI_INT entries for PCI bus behind bridge
0:14.4 even if said PCI bridge function was disabled.
Remove these as invalid, indeterminate bus number could cause conflicts.
PCI_INT entries with bus_sb800[2], bus_hudson[2] and bus_yangtze[2]
were invalid as there is no PCI bridge hardware on device 0:14.0.
Remove these as invalid, indeterminate bus number could cause conflicts.
Change-Id: Ie6a3807f64c8651cf9f732612e1aa7f376a3134f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6358
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3807912b1dc68fae8248a66e37bbe642fb92d3ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6262
Tested-by: build bot (Jenkins)
|
|
Control for XHCI was split to handle AMD_INIT_RESET in agesawrapper
while AMD_INIT_ENV was already handled as part of BiosCallouts.
OEM configuration is supposed to be implemented as part of BiosCallouts,
leaving agesawrapper agnostic of platform details.
TODO: S3 resume for XHCI1.
Change-Id: Id5e9c25a227db4d821f1be4b176470547ca4ea84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6241
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Change-Id: I5b3cbc4d25f06a5f916760d4474621abbf826ee4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6355
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Integrated PCI devices in southbridge silicon have static BDFs,
no need to have variables to store the parent bus or an offset
with constant zero.
Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I7f681b40251f49ff717589ed5e7d7e00ee36c7c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6332
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Only ever used as lvalue (except when incrementing) so this global
is unused.
Change-Id: I616721f937eb0bfdb28f356284efd70f99ccd2dd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6330
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I14a9dc99acb5d5365a3d7e99a3964120bb611b05
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/6308
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Found using coccinelle.
Change-Id: I406de6cfe25d3b471dbb6f98d9c62addae008de3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6195
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Only ever used as lvalue, so no point creating the array.
Change-Id: I6699dfae9377a895e9bc4a52579d00ddcfa60a9f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6277
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Change-Id: Ib531a54db7df6b49a6218f689dcaab712e9dfb01
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6292
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Like many other (but not all) BiosCallouts, StdHeader is also passed
as ConfigPtr argument. Use that instead to make no assumptions of the
real type of FchData as it changes depending of the StdHeader.
Change-Id: Ibdf01d08e63b9e1b8e99ac16abb7f807d37a056e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6240
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ib2a015dac82cec8538f8b1a1c2d45b20b05747bc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Implement logging just once to have uniform output.
Change-Id: I8db694a3bf6b1af459bdf98f7acb99edf4dd07f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6180
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
AGESA correctly uses the enum AGESA_STATUS type whereas boards use a
mess of UINT32 typecasts.
Also no need to shout VOID. We are not that careful on changing
all cases of VOID->void or whitespace issues as these files will
get merged with follow-ups.
Change-Id: I16ccfcc73cda6b917c7ff5fd42ee2cd04e7dc0dd
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6182
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib76ec433710b3a7c26360329a9403585d6f4fe4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6143
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Instead of calling get_bus_conf() three times from write_tables()
and executing it once, just make one call before entering write_tables().
Change-Id: I818e37128cb0fb5eaded3c1e00b6b146c1267647
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6133
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
NOTE: The procedure is moved across a collected timestamp
TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted
for in an earlier entry in cbmem -t output.
Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6132
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This adds use of BROKEN_CAR_MIGRATE to include CBMEM symbols for the
build of romstage also for boards without HAVE_ACPI_RESUME.
These symbols got exposed as the use of preprocessor directives was
reduced.
We expect the linker to do a fair job and optimize away function
bodies that are on unreachable execution paths.
Change-Id: Ibf5181d3eecb87ce647abe0be01072594b05aa5f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6067
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Use one common implementation for all AGESA platforms.
Change-Id: I410f8e0a9c75445882d67659cde00004eb7ad6b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6084
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6110
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6109
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I5314d76168c40a6327d4a9ac3b4f4fb05497d6fc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4525
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Try to 'standardize' the otherwise peculiar method naming to be somewhat
more in-line with other ACPI implementations. This makes it easier to
compare with vendor DSDT dumps for example.
Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5888
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
For anyone who knows the difference between a header and a variable in C
these depictions are rather useless. Thus, these lines wast essential
screen real estate while working on coreboot.
Change-Id: I7fe55d936c035ef83832716c45bfc57d73c0edc7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5979
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use the following command to fix all occurences.
$ git grep -l approriate | xargs sed -i 's/approriate/appropriate/g'
Change-Id: I4cbba972bb445c2407ef2e63ffb3068fc948f1c6
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5987
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5689
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5688
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ibbb07ef308c7e92a8a8dfe066f5e3866d5f8aee2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5687
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I158993bcb654ef27a9fc6b7e9dc3fc955fb740fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5686
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Most of the callouts are not specific to board or even family.
Start new file with default callouts doing nothing and returning
either AGESA_SUCCESS or AGESA_UNSUPPORTED.
Also add callout for returning empty IdsIdData. This feature is
not used and could be easily overriden at board-level at later time.
Change-Id: I65dbcdd80dddc89d47669ebe62c22caa63792f5c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5678
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
We should configure i8254/i8259 down in to the southbridge rather than
romstage of every AGESA/CIMx board much like Intel boards do.
Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5669
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Lines with 'select SERIAL_CPU_INIT' where redundant with the
default being yes. Since there is no 'unselect SERIAL_CPU_INIT'
possibility, invert the default and rename option.
This squelches Kconfig warnings about unmet dependencies.
Change-Id: Iae546c56006278489ebae10f2daa627af48abe94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5700
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear
the fields individually.
Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5659
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Implementation of this function is common for all boards in family,
and also across different families.
Change-Id: I562a132fa6d3ade2700d9a375d7aa21fcf8ea890
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4683
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Dumping the ACPI tables in this way has limited use, is not likely to be
used and is poorly implemented. There are much more sophisticated tools
available on Linux for debugging ACPI as such this code is outside the
scope of coreboots 'bring up the hardware only' philosophy.
A more generic implemention could be done with hexdump() in coreboot
proper following on from this cleanup.
Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5530
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The power button was declared by hudson's ASL as \_SB.PCI0.PWRB, and
always had the wake source declared as GPE3. This is not the correct
wake source for all boards. On some laptops declaring a wake source is
not needed, as the wake mechanism is handled by the EC.
Move the declaration of the power button to mainboard ASL files, and
scope it as \_SB.PWRB . This also makes the naming consistent with the
examples in the ACPI spec. The wake source for the PWRB of HP Pavilion
M6 1035dx is removed, as it is incorrect.
Change-Id: I9c76566025e7f200c0376673f6c6ea299afa4a5d
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5546
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5535
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The MMIO region is set up by AGESA very early on, so we can use it to
access the PM register space in ramstage. 16-bit accessors are also
provided to simplify some setup tasks. 16-bit accesses are not
possible via PIO.
The pm2_iowrite/read accessors are removed, as they are not used.
Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5503
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Not used with AGESA vendorcode.
Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5522
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5521
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not used with AGESA vendorcode.
Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5519
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This config option is fam10 only.
Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Not all boards which use the AMD Hudson southbridge have IDE. However,
the southbridge's asl included an 'ide.asl' file which had to be
present in $(mainboard_dir)/acpi.
Address this issue by removing the inclusion of 'ide.asl' from the
southbridge 'fch.asl' and remove 'ide.asl' from Hudson boards, none
of which have IDE.
If future hudosn board will come with IDE, the device can be declared
in the PCIO scope of dsdt.asl, right below the inclusion of 'fch.asl'.
Change-Id: Ie2efb7ebf8f5b527e26d7aaaeafbd3053a9a6b28
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5459
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Parmer.
Change-Id: Id11d5c5da30346c034d155a73749e7f4c9c980eb
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/4302
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
board_info.txt is a file to be used by board-status to add
some useful info to the generated table like flash chip type.
This series is autogenerated from wiki page Supported_Motherboards.
Change-Id: Ie2bda900713ef4883134477163320936c84c34f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4701
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be
set with values that are not power of 2. The region programmed
as WB cacheable will include all of ROM_SIZE.
Side-effects to consider:
Memory region below flash may be tagged WRPROT cacheable. As an
example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB.
Since this can overlap CAR, we add an explicit test and fail
on compile should this happen. To work around this problem, one
needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and
define a smaller region for WB cache.
With this change flash regions outside CBFS are also tagged WRPROT
cacheable. This covers IFD and ME and sections ChromeOS may use.
Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4625
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
This config was for AMD K8 only.
Change-Id: Ic1ce60041fef6ddee2dae0e3559fb78f088740af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4556
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
On AMD Trinity and Kabini boards errors similar to the following are
shown.
ASSERTION FAILED: file 'src/mainboard/asrock/imb-a180/agesawrapper.c',line 431
DmiTable:100123f7, AcpiPstatein: 10010129,AcpiSrat:0,AcpiSlit:0, Mce:10010de9,Cmc:10010eab,Alib:1002111c, AcpiIvrs:0 in
agesawrapper_amdinitlate agesawrapper_amdinitlate failed: 5
The reason is that on f16kb boards, the CDIT and DMI table are not
created. On f15tn boards, only the DMI table is not created.
Until the root cause is found, disable the table generation to remove
the errors.
Thanks to Wei Hu for debugging and reporting this issue on the list [1].
[1] http://www.coreboot.org/pipermail/coreboot/2013-November/076607.html
CDIT table is not created
Change-Id: I837e3c322bb5331a9b950a72397796a60642c3f3
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/4092
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Besides the AGESA static settings, the settings in mainboard/buildOpt.c also
change the final configuration. We need to make sure the settings in FchParam
in resume stage are the same as they were in cold boot stage, otherwise the
board can not wake up more than once.
Tested on AMD/Olive Hill, AMD/Parmer and ASRock/imb-a180.
(USB keyboard doesn't work when board wakes up. It is not introduced by this
patch. It needs more debugging.)
Change-Id: I5a5e5502080e358ffc3577dc6a40bb762844d998
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/3932
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
A late for loop may reference over the current array allocation
and corrupt an unrelated global variable. As a quick fix bumb the
size of the array allocation uniformly to 6.
We missed these boards for commit 9c7d73ca because the arrays
had been renamed.
Change-Id: Iff2f2a0090d9302576bc72195d2a3f6fa37ce29a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3954
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
ROMCC boards were left unmodified.
Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3853
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The board name in that variable name is not necessary, as it is not board
dependent, that means using the file as a template for making a new
coreboot port for another motherboard the variable does not need to be
changed, and just increases the code differences between AMD Parmer,
AMD Thather and ASUS F2A85-M. So use a generic name.
The same was done for AMD Persimmon (and inherited by the LiPPERT
FrontRunner/Toucan-AF) in the following commit.
commit 5e70766f14253f53190ddd49a544460c6bc1e528
Author: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Date: Tue Feb 26 15:56:11 2013 +0100
AMD Fam14 boards: reduce unnecessary differences, 2nd attempt
Reviewed-on: http://review.coreboot.org/2529
The board name is *not* removed from the `CODEC_ENTRY` variable name as
the verb table not only depends on the codec but also on the board [1].
Having the board name in the variable name is a good indicator that the
pin configuration needs to be adapted when taking this file as a template
for a new port. If it was board independent, a default chip configuration
could be used and shared between all boards, which is unfortunately not
the case.
[1] Unfortunately I was not able to find Jens’ comment in my mail archive
and in the Gerrit Web interface. Not sure where it is, but I am sure
he made that comment.
Change-Id: I440a306cf4ff0a5b1b61d1983d70c66d129904d0
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3199
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Removed the execute bit on all files in mainboard/amd/parmer/acpi
Change-Id: I85ffa66e0beb9c4bfe826b72968f7f633c224487
Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-on: http://review.coreboot.org/3807
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Split the Parmer, Family 15tn, and Hudson DSDT into groups. This splits
the DSDT table into includable ASL files which carry details specific
to the Family 15tn APU, the Parmer platform, and the Hudson FCH. The
dsdt.asl file in the mainboard directory contains only #include
references to the appropriate files.
Initially, this split was done by moving each piece of functionality
into its own file (e.g. IRQ routing and mapping, processor tree, sleep
states and sleep methods, etc.) and those pieces were #included in
dsdt.asl to ensure an exact match (via acpidump/acpixtract/iasl -d)
with the extant version of the table. Once the new tables were found
to exactly match the existing tables, the pieces were rearranged into
reasonable groups (e.g. fch.asl, northbridge.asl, pci_int.asl, etc.).
Some include files have no content but are left as a template for
other platforms and as placeholders for completing the ACPI
implementation for Parmer (e.g. thermal.asl, superio.asl, ide.asl,
sata.asl, etc.).
Change-Id: I098b0c5ca27629da9bc1cff1e6ba9fa6703e2710
Signed-off-by: Steve Goodrich <steve.goodrich@se-eng.com>
Reviewed-on: http://review.coreboot.org/3629
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
... and drop the wrapper on ARMv7
Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3639
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are no files to build left under AMD nortbridge/x/root_complex
directories. For some cases, even the Kconfig file was no longer sourced.
Remove all such references and empty files.
For devicetree.cb treat component paths with "/root_complex" in them valid
even when the directory does not exists. This is because AMD boards us this
dummy chip component as the root node in their devicetree.cb.
The generated devicetree file static.c remains unchanged.
Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3434
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
In commit Rudolf Marek discovered, that it is not uniformly written. As
»ASL names are not case-sensitive and will be converted to upper case.« [2]
this change does not have any functional change.
The following command was used to create this patch.
$ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),'
[1] http://review.coreboot.org/#/c/3318/
[2] http://www.acpi.info/spec40a.htm
(18.2.1 ASL Names)
Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3516
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c
file already placed under southbridge/.
All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally
identical reset.c file under mainboard/. Move those files under
respective southbridge/.
Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3486
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
CONFIG_HUDSON_XHCI_ENABLE will control the XHCI flags in the
amd/parmer and asus/f2a85-m mainboards. The XHCI ports on
amd/thatcher are not wired to USB jacks so always disable the flags.
This was tested on amd/parmer using a USB 3.0 thumbdrive.
Change-Id: I596b040fec30882d8d4dee34ab9f866dc1f8896b
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/3465
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DDI connector table and the PCIe Port List lookup table are
copied onto HEAP. This copy is not needed since these are lookup
tables used to define the platform configuration.
Change-Id: If4760f80e08faa8da4fd11337a3812f89cf805f9
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- SPI controller base address gets overwritten by SD controller under Linux.
- Reason for overwrite is the SPI base address isn't in a standard BAR and doesn't
get automatically reserved. Solution is to add it as a reserved memory area in
ACPI.
- This issue was found on the ASUS F2A85-M platform. Currently a workaround on this
platform was made as part of: http://review.coreboot.org/#/c/3167/3
- Once approved a follow-on patch for other southbridges using a non-standard BAR for
the spi controller.
Change-Id: I1b67da3045729a6754e245141cd83c5b3cc9009e
Signed-off-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-on: http://review.coreboot.org/3270
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This issue can be reproduced in Linux by the following steps:
1) use pm-suspend to suspend.
2) use USB keyboard to wake up.
3) use pm-suspend to suspend. FAIL To SUSPEND.
The cause of this issue is:
USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event,
but this bit is not clear after wake up. So OS thinks there is a
wake up signal and wake up immediately.
In this patch, I add AcpiGpe0Blk using MMIO access and write 1
on bit 11. I have tested on Parmer.
Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3347
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change `sizeof(type) * n`, where n is the number of array
elements, to `sizeof(variable)` to directly get the size of the
variable (struct, array). Determining the size by counting array
elements is error prone and unnecessary.
Not sure why the copy is needed instead of direct reference.
Maybe it has something to do with CAR?
These changes are based on Rudolf’s original patch »ASUS F2A85-M:
Correct and clean up PCIe config« [1], where it was just done for
the ASUS board.
[1] http://review.coreboot.org/#/c/3194/
Change-Id: I4aa4c6cde5a27b7f335a71afc21d1603f2ae814b
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3247
Tested-by: build bot (Jenkins)
Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
These arrays are declared as `static` for AMD SB800 based boards,
so do the same for this generation.
Rudolf Marek just changed `const CODEC_TBL_LIST` to `static const`
in [1]. Adapt all Fam15tn based boards (AMD Parmer, AMD Thatcher,
ASUS F2A85-M) to keep the differences between them small.
[1] http://review.coreboot.org/#/c/3170/3/src/mainboard/asus/f2a85-m/BiosCallOuts.c
Change-Id: I353b38bd8bc77ba500a4b7fe9250e9aa3071c530
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3198
Tested-by: build bot (Jenkins)
|
|
To make it easier to fill in the values, place the table
from the BIOS and Kernel Developer’s Guide (BKDG) [1]
as a comment.
[1] http://www.coreboot.org/Datasheets#AMD_Fam15
Change-Id: I218f76e9fa2dc88d47af51ea6c062e315afb0000
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3221
Tested-by: build bot (Jenkins)
|
|
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory
space to save the PCIe configuration to. This is the
With the following definitions in `AGESA.h`
$ more src/vendorcode/amd/agesa/f14/AGESA.h
[…]
/// PCIe port descriptor
typedef struct {
IN UINT32 Flags; /**< Descriptor flags
* @li @b Bit31 - last descriptor in complex
*/
IN PCIe_ENGINE_DATA EngineData; ///< Engine data
IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info
} PCIe_PORT_DESCRIPTOR;
/// DDI descriptor
typedef struct {
IN UINT32 Flags; /**< Descriptor flags
* @li @b Bit31 - last descriptor in complex
*/
IN PCIe_ENGINE_DATA EngineData; ///< Engine data
IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info
} PCIe_DDI_DESCRIPTOR;
/// PCIe Complex descriptor
typedef struct {
IN UINT32 Flags; /**< Descriptor flags
* @li @b Bit31 - last descriptor in topology
*/
IN UINT32 SocketId; ///< Socket Id
IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
IN VOID *Reserved; ///< Reserved for future use
} PCIe_COMPLEX_DESCRIPTOR;
[…]
memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and,
as two struct members are pointers to arrays with elements of type
`PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these
times the number of array elements have to be reserved:
a + b * 5 + c * 2.
sizeof(PCIe_COMPLEX_DESCRIPTOR)
+ sizeof(PCIe_PORT_DESCRIPTOR) * 5
+ sizeof(PCIe_DDI_DESCRIPTOR) * 2;
But for whatever reason parentheses were put in there making this
calculation incorrect and reserving too much memory.
(a + b * 5 + c) * 2
So, remove the parentheses to reserve the exact amount of memory
needed.
The ASRock E350M1 still boots with these changes. No changes were
observed as expected.
Rudolf Marek made this change as part of his patch »ASUS F2A85-M:
Correct and clean up PCIe config« [1]. Factor this hunk out as it
affects all AMD Brazos and Trinity based boards.
[1] http://review.coreboot.org/#/c/3194/
Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3239
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Apply the following commit to all AMD boards.
commit 935850e08293cec1cb27d12358b27285e780566a
Author: Stefan Reinauer <reinauer@chromium.org>
Date: Mon May 6 16:16:03 2013 -0700
asrock/e350m1: reduce default stack size
The stack used on the ASRock E350M1 is significantly less than
what we currently set (64k per core). In fact, we use about half
of the default stack size (4k) on core 0 and even less on non
BSP cores [1]:
$ grep stack coreboot_without_patch_but_monotonic_timer.log
CPU1: stack_base 002a0000, stack_end 002afff8
CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes
CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes
[…]
Reviewed-on: http://review.coreboot.org/3209
Please note that AGESA seems to define bigger stack sizes. But
these seem to be too much too.
$ git grep STACK_SIZE src/vendorcode/amd
[…]
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE,
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE,
src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE,
[…]
The following command was used to create the patch.
$ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d'
Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3217
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Since this parameter is not used anymore, drop it from
all calls to copy_and_run()
Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3213
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The "gigabit ethernet controller" (GEC) block was added to AMD
Hudson A55E to integrate ethernet capabilities into an AMD
southbridge.
The GEC is designed to work with B50610 and B50610M gigabit PHY
chips from Broadcom. These parts may not be generally available
in small quantities for embedded development.
The GEC block requires an opaque firmware blob to function. The
GEC blob is controlled by AMD and Broadcom and is not available
from coreboot.org.
This change removes GEC support from AMD Parmer and AMD Thatcher
mainboards since these boards do not have the Broadcom PHY.
AMD has requested that the GEC be hidden for Hudson FCH since
the PHY parts are not generally available. This Kconfig option
can make it appear that this is a viable and supported way to
add Ethernet to an embedded board. It is possible to use the
Hudson GEC block with other PHYs, but this requires development
of a custom GEC blob and a custom Ethernet driver. A custom GEC
blob has been developed for a Micrel PHY, but there is no
accompanying driver.
Change-Id: I7a7bf4d41e453390ecf987c9c45ef2434fc1f1a3
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3127
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
|
|
This patch is based on >>AMD Thatcher: ConnectorTypeDP supports both DP and HDMI<< (I23cf1c6) [1]
I tested by DP monitor and HDMI monitor connected by passive DP->HDMI adapter.
Video and audio are OK. Hot plugging is also supported.
[1] http://review.coreboot.org/#/c/3088/
Change-Id: I291beff43609ecb68ece24939f2dbc7c08dd0374
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3090
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
1) The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE,
GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used.
This is based on >AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.h< [1].
2) Disable unused PCIE port in devicetree.cb.
PCIE port 3 is not used in Parmer.
This is based on item 3 of >AMD Thatcher: Fix PCIE link issues< [2].
[1] http://review.coreboot.org/#/c/3087/
[2] http://review.coreboot.org/#/c/3011/
Change-Id: Id6f00d5e77ce5133d9ef3db07f95ad03a59e061a
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3099
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Unfortunately, an unneeded mainboard specific `pmio.h` was created
when merging the AMD Parmer and Thatcher ports.
Rudolf used the header from a more generic location
southbridge/amd/agesa/hudson/hudson.h
doing the the ASUS F2A85-M port, but did not delete the `pmio.h`
now unused `pmio.h` header file.
So adapt AMD Parmer and Thatcher to use the Hudson one as done for
the ASUS F2A85-M and delete the now unused mainboard specific header
file `pmio.h` to avoid duplication.
Change-Id: I961cd145ebc3b83e31c638ac453ac95ee19c18db
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2958
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
|
|
Here's the great news: From now on you don't have to worry about
hitting the right io.h include anymore. Just forget about romcc_io.h
and use io.h instead. This cleanup has a number of advantages, like
you don't have to guard device/ includes for SMM and pre RAM
anymore. This allows to get rid of a number of ifdefs and will
generally make the code more readable and understandable.
Potentially in the future some of the code in the io.h __PRE_RAM__
path should move to device.h or other device/ includes instead,
but that's another incremental change.
Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
The DSDT header contains the fields OEMID and OEM Table ID. See
for example ACPI specification 4.0a [1]
5.2.11.1 Differentiated System Description Table (DSDT)
on page 135. There Table 5-16 contains the descriptions.
Field Byte Length Byte Offset Description
===================================================
OEMID 6 10 OEM ID
OEM Table ID 8 16 The manufacture model ID.
Currently in coreboot there is no common method what to put in
these fields.
Mostly Intel based boards populate it with "CORE " ore "COREv4"
and AMD based boards populate it with the board vendor and
model number, abbreviated appropriately to fit into these fields.
On most boards the proprietary vendor BIOS seems to leave these
fields – displayed with `sudo dmidecode` under System Information –
blank
To Be Filled By O.E.M.
and fill out the Base Board Information with the board vendor and
model name.
In [2] Jens Rottmann argues that the this is really just the table
ID used for naming it and that »99% of the DSDT code is not board
specific«.
Both approaches seem to have their advantages, but using the
second one, developers often seem to forget to update them (for
example AMD Thather).
The current situation is at least not optimal. and therefore at
least unify the string in the OEM Table ID. If unifying the
OEM ID is also a good idea this should be done too.
If later on it should be decided that the board vendor and model
should be used again, this should be somehow derived from
Kconfig.
The following command was used for the change [3].
$ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/'
This patch is split out from [2].
[1] http://www.acpi.info/spec40a.htm
[2] http://review.coreboot.org/#/c/2464/
[3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i
Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2472
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To reduce the differences between these file name the enabling
device function in the directory `src/mainboard` uniformly
`mainboard_enable` [1].
Thanks to the awesome help of gnomon and BlastHardcheese in the
IRC channel #sed on <irc.freenode.net>. gnomon came up with the
following command to do the actual work.
$ cd src/mainboard
$ for f in */*/mainboard.c ; \
> do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \
> [[ -z $src ]] && continue ; \
> printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \
> done
`src/mainboard/digitallogic/msm586seg/mainboard.c` and
`src/mainboard/technologic/ts5300/mainboard.c` had to be adapted
manually as no comma was used separating the struct members.
And with the following statement, gnomon is even more likable!
My pleasure entirely. Good luck with coreboot; I'm a big fan of the project.
[1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html
Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2493
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
At the request of Paul Menzel, I reran an
old classic of a coccinelle script:
@@
expression E;
@@
-(E + 7) & -8
+ALIGN(E, 8)
@@
expression E;
@@
-(E + 15) & -16
+ALIGN(E, 16)
Change-Id: I01da31b241585e361380f75aacf3deddb13d11c3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2487
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The name lapic_cluster is a bit misleading, since the construct is not local
APIC specific by concept. As implementations and hardware change, be more
generic about our naming. This will allow us to support non-x86 systems without
adding new keywords.
Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2377
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The name pci_domain was a bit misleading, since the construct is only
PCI specific in a particular (northbridge/cpu) implementation, but not
by concept. As implementations and hardware change, be more generic
about our naming. This will allow us to support non-PCI systems without
adding new keywords.
Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2376
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The following command was used to correct the grammatical mistake.
$ git grep -l 'This is the stub function will call' | xargs sed -i s,This is the stub function will call,This stub function will call, '{}'
sed: -e Ausdruck #1, Zeichen 6: Nicht beendeter `s'-Befehl
As this file seems to have been copied around a lot, it originally
seems to have come with the following commit for AMD Persimmon and
AMD Inagua.
commit 69da1b676cd3f126b27a6fd3c23c557ac1a03961
Author: Frank Vibrans <frank.vibrans@amd.com>
Date: Mon Feb 14 19:04:45 2011 +0000
Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8.
Change-Id: I2e6630a5172738b01e6def7062284f167e5508b1
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2268
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Continuing with the mainboard cleanup for F15tn, move the functions
to read the SPD from the mainboards for Thatcher and Parmer into the
wrapper for the northbridge/amd/agesa/family15tn.
Move the SPD address customization for the mainboard into the
devicetree.cb file.
Unrelated side note - Porting.h has an un-closed #pragma pack(1)
that can cause confusing side-effects. AGESA's structures all
use this, but coreboot's don't. Be sure to include the coreboot
.h files BEFORE Porting.h is included, not after.
This fix has been tested.
Change-Id: I89cdd225be61f60c6b8e7020e6f8b879983bbd96
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2190
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
|
|
Enable 'all warnings being treated as errors' in thatcher and parmer.
Fixed the following warnings on parmer / thatcher:
src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:
In function 'GetGlobalCpuFeatureListAddress':
src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:
In function 'SaveDeviceContext':
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18:
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16:
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c:
In function 'GetPstateGatherDataAddressAtPost':
src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c:235:10:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:
In function 'MemNInitNBDataTN':
src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:353:32:
warning: assignment from incompatible pointer type [enabled by default]
src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:363:23:
warning: assignment from incompatible pointer type [enabled by default]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:
In function 'GetGlobalCpuFeatureListAddress':
src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:
In function 'SaveDeviceContext':
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18:
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16:
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:37:0:
src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0:
warning: "TOP_MEM" redefined [enabled by default]
src/include/cpu/amd/mtrr.h:31:0:
note: this is the location of the previous definition
src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0:
warning: "TOP_MEM2" redefined [enabled by default]
src/include/cpu/amd/mtrr.h:34:0:
note: this is the location of the previous definition
In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:41:0:
src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuRegisters.h:378:0:
warning: "LOCAL_APIC_ADDR" redefined [enabled by default]
src/include/cpu/x86/lapic_def.h:9:0: note:
this is the location of the previous definition
In file included from src/mainboard/amd/parmer/BiosCallOuts.h:24:0,
from src/mainboard/amd/parmer/mainboard.c:28:
src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0:
warning: "TOP_MEM" redefined [enabled by default]
src/include/cpu/amd/mtrr.h:31:0:
note: this is the location of the previous definition
src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0:
warning: "TOP_MEM2" redefined [enabled by default]
src/include/cpu/amd/mtrr.h:34:0: note:
this is the location of the previous definition
Change-Id: Iecea28232f1761401cf09f7d2a77d3fbac2f5801
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2171
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Go through southbridge/amd/agesa/hudson, thatcher and parmer
mainboard directories and change all references to sb800 to
reference hudson instead.
This is just cleanup and should make no functional difference.
Change-Id: Icd6a9a08c4bbf5e1aed394362d24c05811ed1fba
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2177
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
There are currently too many things in the mainboard directories that
are really more suited to being in the northbridge / southbridge
wrappers. This is a start at moving some of those functions down
into the wrappers.
Move the bios callback functions into the northbridge/amd/agesa/family15tn
directory from the mainboard directories. These can still be overridden
by any mainboard just by updating the pointer in the callback table to
point to a customized version of the function.
Change-Id: Icefaa014f4a4abbe51870aee7aa2fa1164e324c1
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2169
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Add Kconfig option for Legacy free and hook it into the parmer
AGESA initialization as well as the FADT code. This should really
be done inside the southbridge wrapper and not in the mainboard,
but for now the code to attach it to is inside the mainboard.
Update Kconfig for parmer and thatcher to default to legacy free.
Change-Id: Ib899bd02ddc5506caae4aca2c589cc2526638cb8
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2157
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Re-formatting and cleaning up the devicetree.cb files for
parmer and thatcher.
Change-Id: Ic458e59701c1f2593b0a035b96cac60df476ee82
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2164
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
The way that devicetree.cb was configured for the family 15tn boards
was doing... interesting things to the video device initialization.
This was causing S3 resume to fail.
There is a disconnect between how the devicetree should be configured
if there are multiple HT links on the CPU and how it's configured if
there's only one HT link. These platforms were set up as if they
had multiple HT links, which was causing duplicate instances of
devices in the device list.
The scan for the IO Hub was removed from the northbridge code which
isn't a problem for F15tn devices.
Change-Id: I3556b43027746e36b07de7cb1bece4d1b37a3c34
Signed-off-by: Martin Roth <martin@se-eng.com>
Reviewed-on: http://review.coreboot.org/2160
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
