summaryrefslogtreecommitdiff
path: root/src/mainboard/amd/majolica/devicetree.cb
AgeCommit message (Collapse)Author
2022-02-03soc/amd/*/i2c: factor out common I2C pad configurationFelix Held
The I2C pad control registers of Picasso and Cezanne are identical and the one of Sabrina is a superset of it, so factor out the functionality. To avoid having devicetree settings that contain raw register bits, the i2c_pad_control struct is introduced and used. The old Picasso code for this had the RX level hard-coded for 3.3V I2C interfaces, so keep it this way in this patch but add a TODO for future improvements. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-08-05mb/amd/majolica:Enable IOMMU Device for majolicaJason Glenesk
Enable IOMMU PCIe device. BUG=b:194173037 TEST=lspci shows IOMMU device 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1631 Cq-Depend: chrome-internal:4027293,4027294 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: Ia84276ca98163158d818a0efc3e021b93ab365de Reviewed-on: https://review.coreboot.org/c/coreboot/+/56771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-07soc/amd/cezanne: Configure I2C Pad RX Select through devicetreeKarthikeyan Ramasubramanian
Some of the I2C buses are required to operate at different voltage level compared to other I2C buses eg. I2C bus to Google Security Chip (GSC) should be at 1.8V level. By default, all the I2C buses are initialized to operate at 3.3 V. Add support to configure I2C pad RX select through devicetree and update the concerned devicetree. BUG=b:188538373 TEST=Build and boot to OS in Guybrush. Ensure that the communication with GSC is fine. Build Majolica mainboard. Change-Id: I595a64736fdac0274abffb68c5e521302275b845 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-27mb/amd/majolica: enable crypto coprocessor PCIe deviceFelix Held
This fixes the following error from the Linux kernel: ccp 0000:03:00.2: ioremap failed ccp 0000:03:00.2: initialization failed ccp: probe of 0000:03:00.2 failed with error -12 BUG=b:186575712,b:189202985 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id1c6a6cbbdda2cb22e81e2b52b364617d6765e09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54963 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27mb/amd/majolica: set PSPP policy to balancedFelix Held
BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5fd0021170777c755ecb78d339aec05ff786710f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54932 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14mb/amd/majolica: Disable IO ports 0x60/0x64Raul E Rangel
I suspect there is additional initialization required to enable the 8042 keyboard controller on the EC. By removing the range we no longer encounter long 20 second delays when reading the IO ports. Since depthcharge polls the IO ports it makes it seem like depthcharge locked up. BUG=b:182100027 TEST=Boot majolica with depthcharge to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I56a7eb4200e4615e1b4d9f14594d64f93e031a54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-06soc/amd/common/espi,mb/: Allow configuring open drain ALERT#Raul E Rangel
Some designs might wish to use an open drain eSPI ALERT#. This change adds an enum that allows setting the eSPI alert mode. BUG=b:187122344, b:186135022 TEST=Boot guybrush using all 3 alert modes Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06mb/amd/majolica: Enable S0i3 by defaultJason Glenesk
Set s0ix_enable to true. BUG=b:178728116 TEST=Cold boot and perform a cycle of S0i3. Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: I808e78f41509cb03821513b5b63cc8856c891d8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-16soc/amd/cezanne: Add uart controllers to chipset.cbIvy Jian
Add uart controller to chipset.cb and leave it off by default. Turn uart0 on for console for mainboards. BUG=none TEST=builds and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-07mb/amd/majolica: add PCIe devices to devicetreeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I838aeda2e6c403eaa3388a6b934e7ab6b4e918e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-25mb/amd/majolica: Enable IO port 2E/2FZheng Bao
MEC1701 can be accessed by IO port 2E/2F Change-Id: I31f1b147476ec487e64f3c30b3cf514b45ced416 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-11mb/amd/majolica: Enable USB ACPI in devicetreeMathew King
BUG=b:180529005 TEST=boot majolica, all USB ports work Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I6d3506bb4d54c7f8ea1e53576ef68d2aface6c89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-03mb/amd/majolica: Add eSPI supportZheng Bao
Change-Id: I3e82a51173f561df560c36528a9b7ec26cf489b5 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-02mb/amd/majolica: Enable required devices in devicetreeMathew King
Most devices are now disabled by default in the chipset. Enable the iGPU and two XHCI controllers that are required to boot the board. BUG=b:180528708 TEST=To be tested Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I54a4547217fb8e9f67fc0c8e1e36e96dfaae331c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51095 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/cezanne: move CPU cluster to chipset device treeFelix Held
This will be common for all boards, so move it to the chipset device tree. TEST=CPU cluster and LAPIC still show up in console logs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia49e7b4cfc09c60b6152b8ccc47f37b6adc1e319 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50613 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/amd/majolica/devicetree: add CPU clusterFelix Held
Change-Id: I8d8b7f3ea2502e4e49a1290b07d84d5bbb2924a7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50506 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/amd/majolica: add skeleton of Cezanne reference boardFelix Held
This is an adapted copy of mainboard/example/min86 that is currently only used for Jenkins to test the SoC code in soc/amd/cezanne and isn't expected to reach boot block at the moment. It will be extended in future follow-up commits. Change-Id: I6806955952fbfa3227294cfc44fdf9156140e933 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 10:19:26 +0000