summaryrefslogtreecommitdiff
path: root/src/mainboard/amd/inagua/dsdt.asl
AgeCommit message (Collapse)Author
2017-08-23AGESA binaryPI: Consolidate and fix sleep statesKyösti Mälkki
SSFG was meant to be used as a mask to enable sleep states _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. State _S3 is now set conditionally if HAVE_ACPI_RESUME=y. For pi/hudson this had been fixed already preprocessor. Note that all boards had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. States _S1 and _S2 still appear enabled in ASL/AML but may not actually work. TEST: 'cat /sys/power/state' and notice choice 'mem' was removed from the list of available sleep states. Change-Id: I27d616871c1771f0c87d8fba23d4ce1569607765 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-30amd/family14: Add k10temp thermal zone.Tobias Diedrich
The thermal sensor interface exposed in function 3 of the northbridge is a more convenient and faster way to access the processor-internal thermal sensor than using the SMBus/SB-TSI interface from the FCH, see the Family14 BKDG: "Tctl is a processor temperature control value used for processor thermal management. Tctl is accessible through SB-TSI and D18F3xA4[CurTmp]. Tctl is a temperature on its own scale aligned to the processors cooling requirements" Also on at least some of these boards the existing thermal zone is broken and always returns 40C (the default value if the SMBus read failed) because the SMBus muxing register (SmBus0Sel) is not set up correctly. Case in point: The fallback "smbus read failed" temperature is 40 C and the the logs taken from the board status repository for the Asrock E350M1 board all show: "ACPI: Thermal Zone [TZ00] (40 C)" e.g. http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-5054-gf584218/2013-12-20T20:56:20Z/kernel_log.txt#l390 and http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-7030-g6d7de4f/2014-10-16T15:34:19Z/kernel_console.txt#l404 and http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-9989-gf2dfef0/2015-06-13T00:22:49Z/kernel_log.txt#l425 Example lm-sensors output with this patch on the pcengines APU1, on Linux 4.1.0-rc8+ (wiht both CONFIG_ACPI_THERMAL and CONFIG_SENSORS_K10TEMP enabled): acpitz-virtual-0 Adapter: Virtual device temp1: +54.0 C (crit = +100.0 C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +54.0 C (high = +70.0 C) (crit = +100.0 C, hyst = +97.0 C) Change-Id: Id9c5b783ba424246816677099ec6651814e59f21 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10940 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-18AMD Fam14: Split out the AMD Fam14 DSDTMike Loptien
Same splitting as done on Persimmon and ASRock. Moving common DSDT code to common areas and adding new files as necessary. Boards updated are: Inagua Union-Station South-Station Change-Id: I8c9eea62996b41cea23a9c16858c4249197f6216 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3051 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17AMD Fam14 DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same chagne as made to Persimmon in Change-ID If8d86f: http://review.coreboot.org/#/c/2726/ Change-Id: Id560ea85a38f73aaba2c35447bbce46bd9c0d0dd Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17AMD Fam14 DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. This is the same change made to Persimmon with Change-ID I149428: http://review.coreboot.org/#/c/2684/ Change-Id: If6dd1a558d9c319d9a41ce63588550c8e81e595f Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2738 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-15AMD Fam14 DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This is the same change as made to Persimmon with change-id I44f22: http://review.coreboot.org/#/c/2592/ Change-Id: I9017a7619b3b17e0e95ad0fe46d0652499289b00 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2735 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD Fam14 boards: Set P_BLK length to 6 for all processorsPaul Menzel
Currently on for example on AMD Persimmon and ASRock E350M1 Linux complains, that the PBLK length is invalid [1]. ACPI: Invalid PBLK length [0] Consequently, frequency scaling might not work correctly, though for these two boards it seems to work according to PowerTOP. Indeed, according to the ACPI specification [2], setting PBlockLength to 0 is only allowed if there is no PBlockAddress. Otherwise it has to be set to 6. 18.5.93 Processor (Declare Processor) […] PBlockAddress provides the system I/O address for the processors register block. Each processor can supply a different such address. PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. With one exception, all processors are required to have the same PBlockLength. The exception is that the boot processor can have a non-zero PBlockLength when all other processors have a zero PBlockLength. It is valid for every processor to have a PBlockLength of 0. And that is exactly what Linux is checking in `drivers/acpi/processor_driver.c` [3]. static int acpi_processor_get_info(struct acpi_device *device) { […] /* * On some boxes several processors use the same processor bus id. * But they are located in different scope. For example: * \_SB.SCK0.CPU0 * \_SB.SCK1.CPU0 * Rename the processor device bus id. And the new bus id will be * generated as the following format: * CPU+CPU ID. */ sprintf(acpi_device_bid(device), "CPU%X", pr->id); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, pr->acpi_id)); if (!object.processor.pblk_address) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); else if (object.processor.pblk_length != 6) printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n", object.processor.pblk_length); else { pr->throttling.address = object.processor.pblk_address; pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; pr->throttling.duty_width = acpi_gbl_FADT.duty_width; pr->pblk = object.processor.pblk_address; /* * We don't care about error returns - we just try to mark * these reserved so that nobody else is confused into thinking * that this region might be unused.. * * (In particular, allocating the IO range for Cardbus) */ request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } […] } This issue has proliferated to all AMD based boards so fix it for all of them by setting P_BLK length to 6. The DSDT of for example AMD Parmer and AMD Thatcher also set it to 6 everywhere so this solution is taken instead of setting the P_BLK system I/O base to 0 for all but the first processor which is how it is done for earlier AMD based boards. As note having to set this manually should not be needed and this should be autogenerated as done for most of the Intel boards and the AMD K8 based boards (`src/cpu/amd/model_fxx/powernow_acpi.c`). [1] http://www.coreboot.org/pipermail/coreboot/2013-January/073636.html [2] http://acpi.info/DOWNLOADS/ACPIspec40a.pdf [3] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=drivers/acpi/processor_driver.c;h=e83311bf1ebdaaaea1adbf2de1351cca907d3465;hb=5da1f88b8b727dc3a66c52d4513e871be6d43d19#l351 Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • ASRock E350M1: Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> • AMD Persimmon: Tested-by: Martin Roth <martin.roth@se-eng.com> Change-Id: Ie79fe4812532d124cc81747c75a4f3d88d00531c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2189 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-26AMD boards, ASRock E350M1: Remove whitespace in front of comma in DSDTPaul Menzel
commit 585a4006976e903599b7128200a29b5729777818 Author: zbao <fishbaozi@gmail.com> Date: Thu Apr 12 11:27:26 2012 +0800 Leverage the Pstate table created by AGESA. … introduced unneeded whitespace in front of a comma. Revert that part of the above commit. In the file for AMD Dinar tabs and spaces are mixed, but leave that alone for the beginning. Change-Id: I279cd0cb0be8c79258034733773f2ae1c2207cce Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2187 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2012-04-19Leverage the Pstate table created by AGESA.zbao
The name of processor created by AGESA is P00n, whose P is BLDCFG_PROCESSOR_SCOPE_NAME(is 'C' if it is undefined.) and n starts from 0. The dsdt should be aligned with that. This feature has only been tested on persimmon. The changes on all the other boards were propagated. Change-Id: I8c3fa4b94406d530d2bed8e9a1f42b433bbec3ec Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/884 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-07Inagua: Synchronize AMD/inagua mainboard.Kerry Sheh
AMD/persimmon mainboard code is derived from AMD/inagua mainbard. Persimmom update a lot in the last few month, sync these modification to inagua. Change-Id: Ia038e5a2b9550fe81bb075f31e30b98354758e9e Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Reviewed-on: http://review.coreboot.org/542 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-02-14Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8.Frank Vibrans
This code provides support for IBASE Technology DB-FT1 (AMD code name Persimmon) and AMD Inagua platforms. It is dependent on all other patches in this set. Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6352 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1