summaryrefslogtreecommitdiff
path: root/src/mainboard/amd/f2950/cmos.layout
AgeCommit message (Collapse)Author
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-17mainboard/amd: add support for F2950 system boardAndrey Korolyov
F2950 SBC, also known as TONK 1201/TONK 1202, was originally produced as a Centerm F2950 using DB800 reference design. Common configuration does include a 600 MHz GeodeLX CPU underclocked to 500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and 128 or 512 MB IDE DOM. The board does have three USB 2.0 ports (none of them possessing debug capabilities), PS/2, VGA, Geode audio in/out and the serial port. EEPROM needs to be soldered out and flashed externally at the time of this message because flashrom would neither be able to dump BIOS correctly while running vendor BIOS nor write flash contents. All peripherals were tested against Linux 3.16 and seem to work flawlessly. At the moment of this commit coreboot does not pass PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby preventing VGA OPROM from being executed. This would be fixed in the SeaBIOS itself or in a subsequent commit. As a workaround, user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4 Reviewed-on: https://review.coreboot.org/15565 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>