summaryrefslogtreecommitdiff
path: root/src/mainboard/advansus
AgeCommit message (Collapse)Author
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-06console: Drop extra uart_init()Kyösti Mälkki
This call is already in console_init(). Change-Id: Ie0cb3595af514e37efac5ac5d474f52ba551bf22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5140 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-29AGESA boards: Clean up definition of BIOS_SIZE in platform_cfgEdward O'Callaghan
Clean up vendor code from hard coded #define if-def chain with a pre-processor shift and subtract. Change-Id: Ibce34ab576d7db8586a6ec8f9b2460268e0e1878 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4811 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
This config was for AMD K8 only. Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4555 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4523 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
No ROMCC involved, no need to include .c files in romstage.c. Change-Id: I8a2aaf84276f2931d0a0557ba29e359fa06e2fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-09-11AMD sb800 sb900: Fix corruption of a global ramstage variableKyösti Mälkki
A late for loop may reference over the current array allocation and corrupt an unrelated global variable. As a quick fix bumb the size of the array allocation uniformly to 6. Change-Id: Ib067fdf077e091d13e32cc3a8e4a0b713d19bcc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3914 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD: Use same sourcecode for reset in romstage as ramstageKyösti Mälkki
Confusingly, romstage compiled in different copy of soft_reset() than ramstage. Use source in reset.c for both. Change-Id: I2e4b6d1b89c859c7cf5d9e9c8f7748b43d369775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3487 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-08AMD CIMx SB800 boards: platform_cfg.h: Integrate Kconfig SATA Mode choicePaul Menzel
Currently for Advansus A785E-I, ASRock E350M1 and ASUS M5A88-V despite what is chosen in Kconfig »Chipset« menu item, $ more .config […] # CONFIG_ENABLE_IDE_COMBINED_MODE is not set CONFIG_IDE_COMBINED_MODE=0x1 # CONFIG_SB800_SATA_IDE is not set CONFIG_SB800_SATA_AHCI=y # CONFIG_SB800_SATA_RAID is not set CONFIG_SB800_SATA_MODE=0x2 […] the SATA controller is put into IDE mode. $ lspci -nn | grep SATA 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40) Commit »sb800: Add sata ahci/raid mode kconfig option« (d4a0e7d0) [1] added the options above to configure the mode using Kconfig and some SB800 boards were adapted already. For example commit »persimmon: sb800 sata mode configure update« (1386fa74) [2] did so for AMD Persimmon. Doing the same by assigning the Kconfig variable to the value in `platform_cfg.h` integrates this with the three remaining boards listed above. The patch is successfully tested with the ASRock E350M1. $ lspci -nn | grep SATA 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) [1] http://review.coreboot.org/225 [2] http://review.coreboot.org/227 Change-Id: I227257e2c8f04f18c27ff00fe62d42e372de67e4 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-23AMD based boards: platform_cfg.h: Replace `_*BOARDNAME*_CFG_H_` with ↵Jens Rottmann
`_PLATFORM_CFG_H_` Reduce unnecessary differences between AMD based boards only using the file `platform_cfg.h` for configuration making them a little bit easier to compare. Inagua & co. mention the board name in several places which are really not that board specific. Sometimes people even forget to change it: Union Station’s platform_cfg.h starts with "#ifndef _PERSIMMON_CFG_H_". Funny. Change that to "_PLATFORM_CFG_H_" everywhere. The following command was used. $ find . -name platform_cfg.h | xargs sed -i '/_CFG_H_/s/_.*_/_PLATFORM_CFG_H_/' More boards seem to use that kind of naming (`git grep _CFG_H_`) but it is not certain that this will not break anything as for example the board AMD Dinar also has header files for configuration stuff for the north- and southbridge. $ git grep _CFG_H_ […] src/mainboard/amd/dinar/platform_cfg.h:#ifndef _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#define _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#endif //_PLATFORM_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#ifndef _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#define _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#endif //_RD890_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#ifndef _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#define _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#endif //_SB700_CFG_H […] Change-Id: Ida15fa6a7adfc770240ac30e795946000dae3f16 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2464 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Drop duplicate files that prevent building without ramstage.aStefan Reinauer
When dropping ramstage.a duplicate symbols in ramstage will start breaking the build. Hence drop all the duplicate functions implemented by mainboards that have those functions in generic or component code already. Change-Id: I5cf8245c67b6f0f348388db54256d28f47017a61 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1865 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-16Fix Kconfig GENERATE_*_TABLE usageStefan Reinauer
Some boards selected GENERATE_ instead of HAVE_ Change-Id: I450c22d7b044f0c88c21692246d452d516a68a83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1841 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Drop unneeded BOARD_HAS_FADT optionStefan Reinauer
Change-Id: Iaaeee87d70cf052bc7980007cdf1f7dda88b3623 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
These existed to provide a hook to add reserved memory regions in the coreboot memory table. Reserved memory are now added as resources. Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-02AMD and GFXUMA: move setup_uma_memory() to northbridgeKyösti Mälkki
UMA region can be determined at any time after the amount of RAM is known and before the uma_resource() call. Change-Id: I2a0bf2d3cad55ee70e889c88846f962b7faa0c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1379 Reviewed-by: Zheng Bao <zheng.bao@amd.com> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-16Move setup_uma_memory() to AMDFAM10 northbridgeKyösti Mälkki
Following boards had identical code: advansus/a785e-i amd/bimini_fam10 amd/mahogany_fam10 asus/m5a88-v avalue/eax-785e gigabyte/ma78gm iei/kino-780am2-fam10 jetway/pa78vm5 Following boards had identical code: amd/tilapia_fam10 asus/m4a78-em asus/m4a785-m gigabyte/ma785gm gigabyte/ma785gmt In between the two, only whitespace difference. Change-Id: Iaa48cc7b0038ebcc81be49219b4fc87670aa9941 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-19Fix the blank in acpi_tables.czbao
Hope no more blank issue is got from future copy-paste. Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Rename AMD_AGESA to CPU_AMD_AGESAKyösti Mälkki
Also any CPU_AMD_AGESA_FAMILYxx selects CPU_AMD_AGESA, so remove the explicit selects from the mainboards. Change-Id: I4d71726bccd446b0f4db4e26448b5c91e406a641 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/792 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-23SB800: Hide unused gpp portsKerry Sheh
Add configure option SB_GPP_UNHIDE_PORTS for mainboard to hide/unhide the unused sb800 gpp ports. Certain gpp port should be hidden, if no device was detected and hotplug feature is disabled for such port. Hidden unused ports makes lspci -vvv get more accurate information under Linux. Test on avalue/eax-785e mainboard. Change-Id: I1d7df0f2ab6ad69b1b99b8bf046411ae7cdb09c0 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-04WARNINGS_ARE_ERRORS is y per default, don't set it twice.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-03advansus/a785e-i mainboard enable warning as errorKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6617 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-07ADVANSUS A785E-I Mainboard support, Family10h ASB2, RS880(RS785E) + SB820 ↵Kerry She
platform. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6561 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 05:58:58 +0000