| Age | Commit message (Collapse) | Author |
|---|
|
TPM2 structure definitions use pointers instead of buffers where
possible. One structure was left behind. Replace that buffer definition
with a pointer to be consistent.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=compilation succeeds, the code using the changed structure in the
upcoming patches allows to successfully boot chrome OS on Kevin
Change-Id: Iea59943aa0ad6e42fcd479765a9ded0d7a1680d7
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 02b2909b1875ba65cd56cf8e3697a2b67ddaea07
Original-Change-Id: I9856ac516be13f5892ba8af0526708409a297033
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/358771
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/15609
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For some reason the self loader wasn't clearing segments
marked as BSS type. Other segments which weren't fully
written by the file-backed content were being cleared up
to the indicated memsize. Treat segments marked BSS
similarly by clearing their content.
Change-Id: I9296c11a89455a02e5dd18bba13d4911517c04f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15603
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There were two successive calls to prog_set_area() which
duplicated the same logic. Remove the unnecessary redundancy.
Change-Id: I594577f8e7e78d403e7a5656f78e784e98c2c859
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15602
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The list insertion operations were open coded at each location.
Add helper functions which provide the semantics needed by
the selfboot code in a single place.
Change-Id: Ic757255e01934b499def839131c257bde9d0cc93
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15601
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
TPM commands need to be serialized (marshaled) to be sent to the
device, and the responses need to be de-serialized (unmarshaled) to be
properly interpreted by upper layers.
This layer does not exist in TPM1.2 coreboot implementation, all TPM
commands used there were hardcoded as binary arrays. Availability of
the marshaling/unmarshaling layer makes it much easier to add new TPM
commands to the code.
Command and response structures used in these functions are defined in
Parts 2 and 3 of the TCG issued document
Trusted Platform Module Library
Family "2.0"
Level 00 Revision 01.16
October 30, 2014
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to
successfully initialize firmware and kernel TPM spaces.
Change-Id: I80b3f971e347bb30ea08f820ec3dd27e1656c060
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0782d9d452efb732e85d1503fccfcb4bf9f69a68
Original-Change-Id: I202276ef9a43c28b5f304f901ac5b91048878b76
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353915
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15570
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
This is the first approximation of implementing TPM2 support in
coreboot. It is very clearly incomplete, some of the larger missing
pieces being:
- PCR(s) modification
- protection NVRAM spaces from unauthorized deletion/modification.
- resume handling
- cr50 specific factory initialization
The existing TPM1.2 firmware API is being implemented for TPM2. Some
functions are not required at all, some do not map fully, but the API
is not yet being changed, many functions are just stubs.
An addition to the API is the new tlcl_define_space() function. It
abstracts TMP internals allowing the caller to specify the privilege
level of the space to be defined. Two privilege levels are defined,
higher for the RO firmware and lower for RW firmware, they determine
who can write into the spaces.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied Kevin/Gru devices can
initialize and use firmware and kernel spaces
Change-Id: Ife3301cf161ce38d61f11e4b60f1b43cab9a4eba
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: bcc8e62604c705798ca106e7995a0960b92b3f35
Original-Change-Id: Ib340fa8e7db51c10e5080973c16a19b0ebbb61e6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353914
Original-Commit-Ready: Martin Roth <martinroth@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15569
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Change-Id: I2c49d68ea9a8f52737b6064bc4fa703bdb1af1df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15463
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide common implementations for gpio_base2_value() variants
which configure the gpio for internal pullups and pulldowns.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: I9be8813328e99d28eb4145501450caab25d51f37
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15557
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a function for an SOC to define that will allow it to map the
SOC-specific gpio_t value into an appropriate ACPI pin. The exact
behavior depends on the GPIO implementation in the SOC, but it can
be used to provide a pin number that is relative to the community or
bank that a GPIO resides in.
Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659bcf
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15512
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That function is no longer used. All users have been updated to
use the ulzman() function which specifies lengths for the input
and output buffers.
Change-Id: Ie630172be914a88ace010ec3ff4ff97da414cb5e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In order to ease the porting of supporting NHLT endpoints
introduce a nhlt_endpoint_descriptor structure as well as
corresponding helper functions.
Change-Id: I68edaf681b4e60502f6ddbbd04de21d8aa072296
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15486
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Implement writeat and eraseat support into the region_device_ops struct.
Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15318
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add functions to convert between seconds and a struct rtc_time. Also
add a function that can display the time on the console.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits and after setting RTC on the EC:
boot on gru into linux shell, check firmware log:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:44
Then reboot ~10 seconds and check again:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:54
Change-Id: Id148ccb7a18a05865b903307358666ff6c7b4a3d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3b02dbcd7d9023ce0acabebcf904e70007428d27
Original-Change-Id: I344c385e2e4cb995d3a374025c205f01c38b660d
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351782
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allow reg_script to be used during the bootblock.
TEST=Build and run on Galileo Gen2
Change-Id: I55fe0be3f50116927b801ce67a3f23bb1931f6e7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15131
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add asmlinkage to bootblock_main_with_timestamp so that it may be called
directly from the assembly code.
TEST=Build for Amenia and Galileo Gen2
Change-Id: Iefb8e5c1ddce2ec495b9272966b595d5adcebc1c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15125
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Modern platforms like Apollolake do not use XIP for early stages. In
such cases, cbfs_prog_stage_load should check for NO_XIP_EARLY_STAGES
instead of relying on ARCH_X86 to decide if a stage is XIP.
Change-Id: I1729ce82b5f678ce8c37256090fcf353cc22b1ec
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15045
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I106fccd725a5c944f4e8e0f196b31c9344f588c7
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This fixes compilation of coreboot on Glados
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
TEST=emerge-glados coreboot works again
BUG=none
Change-Id: Ibaae68192a3dc070c6ecf79223da4a1e1f18b352
Reviewed-on: https://chromium-review.googlesource.com/346198
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
(cherry picked from commit d7c2c72698e81b1410f9839c77be2e77b8ed83d6)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14930
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Duncan Laurie <dlaurie@google.com>
|
|
Add a new function "gpio_acpi_path()" that can be implemented by
SoC/board code to provide a mapping from a "gpio_t" pin to a
controller by returning the ACPI path for the controller that owns
this particular GPIO.
This is implemented separately from the "acpi_name" handler as many
SOCs do not have a specific device that handles GPIOs (or may have
many devices and the only way to know which is the opaque gpio_t)
and the current GPIO library does not have any association with the
device tree.
If not implemented (many SoCs do not implement the GPIO library
abstraction at all in coreboot) then the default handler will return
NULL and the caller knows it cannot determine this reliably.
Change-Id: Iaa0ff6c8c058f00cddf0909c4b7405a0660d4cfb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14842
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This function will turn a string of ASCII hex characters into an array
of bytes. It will ignore any non-ASCII-hex characters in the input
string and decode up to len bytes of data from it.
This can be used for turning MAC addresses or UUID strings into binary
for storage or further processing.
Sample usage:
uint8_t buf[6];
hexstrtobin("00:0e:c6:81:72:01", buf, sizeof(buf));
acpigen_emit_stream(buf, sizeof(buf));
Change-Id: I2de9bd28ae8c42cdca09eec11a3bba497a52988c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14837
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is useful, for example, in the bootblock, when a timestamp is
available which predates the call to main() in lib/bootblock.c
Change-Id: I17bb0add9f2d8721504b2e534dd6904d1201989c
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14862
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
timestamp_cache_get() would call timestamp_cache_init() whenever it
found a timestamp cache in the TIMESTAMP_CACHE_UNINITIALIZED state.
That means that timestamp_cache_get() will never reurn a cache in the
uninitialized state.
However, timestamp_init() checks against the uninitialized state, as
it does not expect timestamp_cache_get() to perform any initialization.
As a result, the conditional branch can never be reached.
Simply remove the timestamp_cache_init() call from timestamp_cache_get().
Change-Id: I573ffbf948b69948a3b383fa3bc94382f205b8f8
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14861
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however
the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define.
Those 2 values are not consistent. Therefore, remove the Kconfig
variable and defer to the #define generated by fmdtool.
Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14765
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Extend the serial port description to include the input clock frequency
and a payload specific value.
Without the input frequency it is impossible for the payload to compute
the baud-rate divisor without making an assumption about the frequency.
This breaks down when the UART is able to support multiple input clock
frequencies.
Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device
being used as the console UART. Specify this value as zero when the
UART is not on the PCI bus. Otherwise specify the device using bus,
device and function along with setting the valid bit.
Currently the only payload to consume these new fields is the EDK-II
CorebootPayloadPkg.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14609
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Before multi-CBFS support was added, x86 platforms cached their
ramstage in TSEG so that it could be re-used on the resume
path. However, more resources/assets are being put in cbfs that are
utilized during ramstage. Just caching ramstage does not mean that
correct cbfs region is used for all the data. Thus, provide an option
to allow platforms to skip caching any component for resume.
Change-Id: I0e957a6b859cc7d700aaff67209a17c6558be5de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14636
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 the code
was changed from one to two lines in the body of an if()
statement, without adding braces.
Change-Id: Ibbbdf240157adae95151fb2ce0135948caa60108
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14621
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Add the ability to enable the display of the script:
* Added REG_SCRIPT_COMMAND_DISPLAY to enable and disable display output
* Added context values to manage display support
* display_state - Updated by the command to enable or disable display
* display_features - May be updated by step routine to control what
the step displays for register and value
* display_prefix - Prefix to display before register data
* Added REG_SCRIPT_DISPLAY_ON and REG_SCRIPT_DISPLAY_OFF macros to
control the display from the register script
* Added REG_SCRIPT_DISPLAY_REGISTER and REG_SCRIPT_DISPLAY_VALUE as
two features of the common display. With these features enabled
the following is output:
* Write: <optional prefix> register <-- value
* Read: <optional prefix> register --> value
TEST=Build and run on Galileo Gen2
Change-Id: If0d4d61ed8ef48ec20082b327f358fd1987e3fb9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14553
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It used to use CONFIG_CBFS_SIZE. The plan is that CBFS_SIZE only informs
default*.fmd generation, while everything else derives its information
from there.
Also document the existing assumption that boot media should access the
COREBOOT region (and not any other potentially existing fmap region
containing a CBFS).
Change-Id: I08254e4510f71edf99c2c8b56ac8f92008727c4a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14572
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Utilize the architecture dependent coreboot table size value
from <arch/cbconfig.h>
Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14455
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Remove the platform_bus_table routine and replace it with a link time
table. This allows the handlers to be spread across multiple modules
without any one module knowing about all of the handlers.
Establish number ranges for both the SOC and mainboard.
TEST=Build and run on Galileo Gen2
Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14554
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add xor support which enables toggling of a bit:
* REG_SCRIPT_COMMAND_RXW enum value
* REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW
* REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW
* reg_script_rxw routine to perform and/xor operation
* case in reg_script_run_step to call reg_script_rxw
TEST=Build and run on Galileo Gen2
Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14495
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Decode each cbfs_payload_segment into native byte order during
segments iteration.
Note :
List ordering has been changed, segments are now always inserted
at the end.
cbfs_serialized.h PAYLOAD_SEGMENT definitions have been changed
to their standard order (big-endian).
Change-Id: Icb3c6a7da2d253685a3bc157bc7f5a51183c9652
Signed-off-by: George Trudeau <george.trudeau@usherbrooke.ca>
Reviewed-on: https://review.coreboot.org/14294
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to de-duplicate common patterns implement one write_tables()
function. The new write_tables() replaces all the architecture-specific
ones that were largely copied. The callbacks are put in place to
handle any per-architecture requirements.
Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14436
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a architecture specific function, arch_write_tables(), that
allows an architecture to add its required tables for booting.
This callback helps write_tables() to be de-duplicated.
Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A architecture-specific function, named bootmem_arch_add_ranges(),
is added so that each architecture can add entries into the bootmem
memory map. This allows for a common write_tables() implementation
to avoid code duplication.
Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14434
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The x86 architecture needs to add a forwarding table to
the real coreboot table. Provide a helper function to do
this for aligning the architectures on a common
write_tables() implementation.
Change-Id: I9a2875507e6260679874a654ddf97b879222d44e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In addition to being consistent with all other architectures,
all chipsets support cbmem so the low coreboot table path is
stale and never taken. Also it's important to note the memory
written in to that low area of memory wasn't automatically
reserved unless that path was taken. To that end remove
low coreboot table support for x86.
Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Each arch was calling cbmem_list() in their own write_tables()
function. Consolidate that call and place it in common code
in write_coreboot_table().
Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14430
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some ld versions seem to merge the .zeroptr section (NOLOAD, address 0)
with some debug sections (NOLOAD, address 0) which makes the build
explode when the debug sections are then stripped (including the zeroptr
symbol).
Just define zeroptr to be 0, no sections needed, to avoid this
"optimization".
Checked the objdump -dS of code using it that the accesses look sane.
Change-Id: Ia7cb3e5eae87076caf479d5ae9155a02f74b5663
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14344
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Our EDID code had always been aligning the framebuffer's
bytes_per_line (and x_resolution dependent on that) to 64. It turns out
that this is a controller-dependent parameter that seems to only really
be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper
function to calculate bits-per-pixel dependent values) probably actually
broke this for some other controllers by applying the alignment too
widely.
This patch makes it explicitly configurable and depends the default on
ARCH_X86 (which seems to be the simplest and least intrusive way to make
it fit most cases for now... boards where this doesn't apply can still
override it manually by calling edid_set_framebuffer_bits_per_pixel()
again).
Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14267
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
A long time ago many Chrome OS boards had pages full of duplicated
boilerplate code for the fill_lb_gpios() function, and we spent a lot of
time bikeshedding a proper solution that passes a table of lb_gpio
structs which can be concisely written with a static struct initializer
in http://crosreview.com/234648. Unfortunately we never really finished
that patch and in the mean time a different solution using the
fill_lb_gpio() helper got standardized onto most boards.
Still, that solution is not quite as clean and concise as the one we had
already designed, and it also wasn't applied consistently to all recent
boards (causing more boards with bad code to get added afterwards). This
patch switches all boards newer than Link to the better solution and
also adds some nicer debug output for the GPIOs while I'm there.
If more boards need to be converted from fill_lb_gpio() to this model
later (e.g. from a branch), it's quite easy to do with:
s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/
Based on a patch by Furquan Shaikh <furquan@google.com>.
BUG=None
BRANCH=None
TEST=Booted on Oak. Ran abuild -x.
Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14226
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In order to not muddle arch vs chipset implementations provide
a generic prog_segment_loaded() which calls platform_segment_loaded()
and arch_segment_loaded() in that order. This allows the arch variants
to live in src/arch while the chipset/platform code can implement
their own.
Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14214
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Coreboot and most payloads support three basic pixel widths for the
framebuffer. It assumes 32 by default, but several chipsets need to
override that value with whatever else they're supporting. Our struct
edid contains multiple convenience values that are directly derived from
this (and other properties), so changing the bits per pixel always
requires recalculating all those dependents in the chipset code. This
patch provides a small convenience wrapper that can be used to
consistently update the whole struct edid with a new pixel width
instead, so we no longer need to duplicate those calculations
everywhere.
BUG=None
TEST=Booted Oak in all three pixel widths (which it conveniently all
supports), confirmed that images looked good.
Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds support for an alternative ternary number system in
which group of GPIOs can be interpreted. In this system, the digit
combinations that would form a binary number (i.e. that contain no 'Z'
state) are used to represent the lower values in the way they're used in
the normal binary system, and all the combinations that do contain a 'Z'
are used to represent values above those. We can use this for boards
that originally get strapped with binary board IDs but eventually
require more revisions than that representation allows. We can switch
their code to binary_first base3 and all old revisions with already
produced boards will still get read as the correct numbers.
Credit for the algorithm idea goes to Haran Talmon.
BRANCH=None
BUG=None
TEST=Stubbed out the actual GPIO reading and simulated all combinations
of 4 ternary digits for both number systems.
Change-Id: Ib5127656455f97f890ce2999ba5ac5f58a20cf93
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14116
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order for a caller to utilize an rmodule's parameters section
after calling rmodule_stage_load() export the rmodule's parameter
pointer in struct rmod_stage_load.
Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14139
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change 13363 (555d6c2) introduced a bug where cbmem_add_bootmem() was
converted to use a new function. Unfortunately instead of passing a
pointer, NULL was passed due to type confusion. This change fixes that
problem by passing address of stack variable instead of NULL.
Change-Id: Ib8e1add3547cda01f71bf1dea14d3e58bdd99730
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14033
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Change-Id: I8e57c23565f173afc0f4d450579b8bfb35aeb964
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13363
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On platforms that didn't use 32-bit addresses, enabling the
CONFIG_TRACE option (Trace function calls) would break the build due
to a cast from a pointer of a different size.
This fixes this warning:
src/lib/trace.c:29:58: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13962
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Platforms that need to initialize WRDD package with the regulatory domain
information should implement function wifi_regulatory_domain.
A weak implementation is provided here.
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/314384
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Tested-by: Hannah Williams <hannah.williams@intel.com>
(cherry picked from commit c25d7221679d1fab830d614eeabfa3436bce6ac1)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I1cbdf4e940b009c74ee8ed8f4fca85f4f5c943b2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 27bba336e620a2d3d331e350d4f46164e337fabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: I84e2acd748856437b40bbf997bf23f158c711712
Original-Reviewed-on: https://chromium-review.googlesource.com/329291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There was no 'early' call into the SoC code prior to console
getting initialized. Not having this enforces the mainboard to
drive the setup of the console which typically just ends up
calling into the SoC code. Provide a SoC early init call
to handle this without having to duplicate the same code
in mainboards utilizing the same SoC.
Change-Id: Ia233dc3ae89a77df284d6d5cf5b2b051ad3be089
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13791
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix an error where a variable named 'free' was shadowing the
function 'free'.
src/lib/memrange.c:293:73: error: declaration of 'free' shadows a global
declaration [-Werror=shadow]
Change-Id: Ie57194b392f8f00ed4fd5c76dab27299b00ae293
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13788
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add all needed functions to fsp_baytrail so that reg_script can
do full iosf access. To keep it simple, this patch synchronises
iosf access between baytrail and fsp_baytrail.
Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Only i386 has code to support bounce buffer. For others coreboot
would silently discard part of binary which doesn't work and is a hell to debug.
Instead just die.
Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13750
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add lb_arch_add_records() to allow the architecture code to
generically hook into the coreboot table generation.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=With all subsequent patches confirmed lb_arch_add_records() is
called when a strong symbol is provided.
Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13669
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Add the DEBUG_BOOT_STATE Kconfig value to enable boot state debugging.
Update include/bootstate.h and lib/hardwaremain.c to honor this value.
Add a dashed line which displays between the states.
Testing on Galileo:
* select DEBUG_BOOT_STATE in mainboard/intel/galileo/Kconfig
* Build and run on Galileo
Change-Id: I6e8a0085aa33c8a1394f31c030e67ab3d5bf7299
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13716
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reduce the debug output from FMAP lookups. When we had one or
two FMAP lookups in a boot this was not a big deal, but now that
we do many lookups it is a lot of unnecessary output duplication.
This change reduces these 3 lines:
FMAP: area VBLOCK_A found
FMAP: offset: 200000
FMAP: size: 65536 bytes
To just one line:
FMAP: area VBLOCK_A found @ 200000 (65536 bytes)
And makes the header output only print once:
FMAP: Found "FMAP" version 1.0 at c10000.
FMAP: base = 0 size = 1000000 #areas = 29
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=boot on chell and enjoy non-truncated memconsole
Change-Id: Ib5862b8bfad113a700faae89089557094aa6d499
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6890f36536d4ae6fc4988fc8191b0cff4e33e2e6
Original-Change-Id: Ifefee1ab26e6ee406de552880fbbd5b7916fcadd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326887
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13695
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We've had a second version of ulzma() that would check the input and
output buffer sizes in libpayload for a while now. Since it's generally
never a bad idea to double-check for overruns, let's port it to coreboot
and use it where applicable. (This requires a small fix in the four byte
at a time read optimization we only have in coreboot, since it made the
stream counter hit the end a little earlier than the algorithm liked and
could trigger an assertion.)
BRANCH=None
BUG=None
TEST=Booted Oak, Jerry and Falco.
Change-Id: Id566b31dfa896ea1b991badf5a6ad9d075aef987
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch generalizes the approach previously used for ARM32
TTB_SUBTABLES to "auto-detect" whether a certain region was defined in
memlayout.ld. This allows us to get rid of the explicit Kconfig for the
TIMESTAMP region, reducing configuration redundancy and avoiding
confusion when setting up future boards.
(Removing armv4/bootblock_simple.c because it references this Kconfig
and it is a dead file that I just forgot to remove in CL:12076.)
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that all pre-RAM timestamps are still
there. Built Nyan and Falco.
Change-Id: I557a4b263018511d17baa4177963130a97ea310a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13652
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There's no delcaration used. Remove the include.
Change-Id: I6fa7de6362ca0e92f0d5a7d07f3a224b9f77f709
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we're reaching the timestamp limit on certain platforms (both for
the pre-RAM cache and the final CBMEM region), this patch increases the
amount of space for both. In the pre-RAM case, it achieves this by
always utilizing the full size of the TIMESTAMP() region allocated in
memlayout.ld, rather than arbitrarily limiting it to some constant.
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that I can once again see all pre-RAM
timestamps after picking in the LZ4 patch series.
Change-Id: Iabb075a48d8d1e3e1811afeaad5ab47e7846c972
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13651
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch added nhlt_soc_serialize_oem_overrides and
nhlt_serilalize_oem_overrides to be able to override oem_id and
oem_table_id.board file can pass specific string by calling
nhlt_soc_serialize_oem_overrides
kernel use these two fields to construct a topology binary name
if the designate file is not found a default dfw_sst.bin will be used
it is optional.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171
Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322860
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13602
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The VBNV region size is determined by vboot and is not really
configurable. Only the CMOS implementation defined this config
variable so switch it to use VBNV_BLOCK_SIZE defined by vboot
in vbnv_layout.h instead.
This requires updating the broadwell/skylake cmos reset functions
to use the right constant.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d
Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324520
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13598
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some of the functions within bootmode.c may be required
by boards in verstage. Therefore, allow this file to be built
in verstage.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ bootmode.c dependencies in separate verstage.
Change-Id: Id291c1b5cc6594c3ee16c7c3385e682addc0efb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 084b620e12e7f948087786c0e34d5999a73137a5
Original-Change-Id: I2207819ec1490767cb1cf4b92e34e714783c1c22
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324071
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13581
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Selecting UNCOMPRESSED_RAMSTAGE prevents lzma.c from being compiled for
romstage. Adjust the logic in rmodule.c to prevent calls to the ulzma
routine when UNCOMPRESSED_RAMSTAGE is selected.
TEST=Build and run on Galileo
Change-Id: I7409e082baab3c2a086c57ad5aa9844ba788c7cd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13591
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The COVERAGE_MAGIC macro has a trailing `4' on it, which makes it a
64-bit large integer, as opposed to a 32-bit unsigned integer, as
originally designated in `util/cbmem/cbmem.c'. Remove this number so
building with CODE_COVERAGE will succeed.
Change-Id: Ib5d7f2704a4c092c3eca6f62e219edb30950d793
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/13520
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
zeroptr is a linker object pointing at 0 that can be used to thwart
GCC's (and other compilers') "dereferencing NULL is undefined"
optimization strategy when it gets in the way.
Change-Id: I6aa6f28283281ebae73d6349811e290bf1b99483
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/12294
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There were several spots in the tree where the path to a per class
object file was hardcoded. To make use of the src-to-obj macro for
this, it had to be moved before the inclusion of subdirs. Which is
fine, as it doesn't have dependencies beside $(obj).
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the
memlayout.ld scripts and infrastructure. This allows bootblock on
x86 to utilize all the other coreboot infrastructure without
relying romcc.
Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13069
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Instead of solely relying on malloc for building up an address space
for the range_entry objects allow one to supply a list of free entries
to memranges_init_empty(). Doing this and only calling malloc() in
ramstage allows a memranges oboject to be used in a malloc()-free
environment.
Change-Id: I96c0f744fc04031a7ec228620a690b20bad36804
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13020
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Mimicking change I7037308d2, always compile mdelay for romstage.
The boards that #included delay.c in the romstage now rely on the linker
instead, which is a desirable cleanup.
Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13115
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Id58f252e238cc3eb3fe9632493642d2a37c2a772
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12873
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We already do this for lines with all zeroes, so it makes sense to
treat all ones the same, for symmetry.
Change-Id: I4b637b07a49e0c649331aa200995b474dd9a2682
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12872
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
commit a8aef3ac (cbfs_spi: Initialize spi_flash when initializing
cbfs_cache) introduced a bug that makes the rarely-used unified
CBFS_CACHE() memlayout macro break when used in conjunction with
cbfs_spi.c (since that macro does not define a separate
postram_cbfs_cache region). This patch fixes the problem by making all
three region names always available for both the unified and split
macros in every stage (and adds code to ensure we don't reinitialize
the same buffer again in romstage, which might be a bad idea if
previous mappings are still in use).
BRANCH=None
BUG=None
TEST=Compiled for both kinds of macros, manually checked symbols in
disassembled stages.
Change-Id: I114933e93080c8eceab04bfdba3aabf0f75f8ef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f270f88e54b42afb8b5057b0773644c4ef357ef
Original-Change-Id: If172d9fa3d1fe587aa449bd4de7b5ca87d0f4915
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/318834
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12933
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These files provide symbols needed by console and uart drivers. This
was not an issue in the past, as we were not setting up a C
environment this early in the boot process.
Change-Id: Ied5106ac30a68971c8330e8f8270ab060994a89d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Mediatek's bootblock needs mdelay, which depends on a udelay
implementation. Compiling the file for bootblock poses no harm:
Either udelay exists (in which case mdelay is usable) or it doesn't in
which case we see exactly the same kind of build time error (just with
udelay instead of mdelay).
Change-Id: I7037308d2d79c5cb1b05bb2b57a0912ad11cd7a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13049
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Intel's SST (Smart Sound Technology) employs audio support
which may not consist of HDA. In order to define the topology
of the audio devices (mics, amps, codecs) connected to the
platform a NHLT specification was created to pass this
information from the firmware to the OS/userland.
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Tested on glados. Audio does get emitted and some mic recording
works.
Change-Id: I8a9c2f4f76a0d129be44070f09d938c28a73fd27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2472af5793dcffd2607a7b95521ddd25b4be0e8c
Original-Change-Id: If469f99ed1a958364101078263afb27761236421
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312264
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12935
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- occured -> occurred
- accomodate -> accommodate
- existant -> existent
- asssertion -> assertion
- manangement -> management
- cotroller -> controller
Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To continue sharing more code between the tools and
coreboot proper provide cbfs parsing logic in commonlib.
A cbfs_for_each_file() function was added to allow
one to act on each file found within a cbfs. cbfs_locate()
was updated to use that logic.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized and booted on glados.
Change-Id: I1f23841583e78dc3686f106de9eafe1adbef8c9f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proper return value to signal an error from cbfs_prog_stage_load()
is -1, not 0.
Change-Id: Ie53b0359c7c036e3f809d1f941dab53f090b84ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12633
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Most devices do not use SPI before they initialize CBMEM. This change
initializes spi_flash in the CBMEM_INIT_HOOK to initialize the postram
cbfs cache so it is not overwritten when boot_device_init is called
later.
BUG=chromium:210230
BRANCH=none
TEST=confirm that the first cbfs access can occur before RAM initialized
and after on panther and jerry.
Change-Id: If3b6efc04082190e81c3773c0d3ce116bb12421f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ab242786a16eba7fb423694f6b266e27d7660ec
Original-Change-Id: I5f884b473e51e6813fdd726bba06b56baf3841b0
Original-Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/314311
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12601
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently the CBFS mmap cannot be accessed at the beginning of romstage
because it waits until DRAM is initialized. This change first loads CBFS
into SRAM and then switches to using DRAM as the backing once it is
initialized.
BUG=chromium:210230
BRANCH=none
TEST=confirm that the cbfs can be access at the beginning and end of
romstage on different boards.
Change-Id: I9fdaef392349c27ba1c19d4cd07e8ee0ac92dddc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ccaaba266386c7d5cc62de63bdca81a0cc7c4d83
Original-Change-Id: Idabfab99765b52069755e1d1aa61bbee39501796
Original-Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312577
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12586
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If the timestamp table gets corrupted (separate issue), the
timestamp_sync_cache_to_cbmem() function may add a large number of bogus
timestamp entries.
This causes a flood of "ERROR: Timestamp table full". With logs going
to a serial console, this renders the system essentially unbootable.
There really isn't a need to log that more than once, so log it when the
last slot in the timestamp table is filled.
Change-Id: I05d131183afceca31f4dac91c5edc95cfb1e443f
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: http://review.coreboot.org/12506
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
hexdump currently rounds up length to a multiple of 16.
So, hexdump(ptr, 12) prints 16 hex digits, including 4 garbage bytes.
That isn't desirable and is easy to fix.
Change-Id: I86415fa9bc6cdc84b111e5e1968e39f570f294d9
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: http://review.coreboot.org/12486
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There are few drawbacks reading VPD from SPI flash in user land, including
"lack of firmware level authority" and "slow reading speed".
Since for many platforms we are already reading VPD in firmware (for
example MAC and serial number), caching the VPD data in CBMEM should
will speed up and simplify user land VPD processing without adding
performance cost.
A new CBMEM ID is added: CBMEM_ID_VPD, referring to a structure containing
raw Google VPD 2.0 structure and can be found by the new LB_TAG_VPD in
Coreboot tables.
BRANCH=smaug
BUG=chrome-os-partner:39945
TEST=emerge-smaug coreboot chromeos-bootimage # and boots successfully.
[pg: lots of changes to make it work with what happened in upstream
since 2013]
Change-Id: If8629ac002d52abed7b480d3d06298665613edbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 117a9e88912860a22d250ff0e53a7d40237ddd45
Original-Change-Id: Ic79f424a6e3edfb6c5d168b9661d61a56fab295f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285031
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12453
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The EDID parsing code continued to update _some_ fields of the output
edid but not others if "did_detailed_timing" was already set. It also
then went on to print out this halfway mix of modes each time, despite
the fact that it didn't really update everything.
Let's fix that. We'll reduce code changes by using a temporary copy of
data in detailed_block() and then we'll copy it back if we decide we
should update.
BRANCH=none
BUG=chrome-os-partner:46998
TEST=No more bogus printouts
Change-Id: Idbfa233e0997244c22ef21c892c4473a91621821
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d69999cdd7ce3cd2c9332ab3f22ea8eb4b6f2e9
Original-Change-Id: Ia72cac7fda2772f26477e43237678fa30feca584
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309541
Original-Reviewed-on: https://chromium-review.googlesource.com/309609
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12444
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The hardcoded clock value for 640x480 was 25.175 MHz. That's a valid
clock to use, but is quite hard to make a non-jittery clock from PLLs.
It's much easier to make 25.200 MHz, so let's do that.
The difference between the two modes is 59.9 Hz vs. 60 Hz and it seems
better to make a non-jittery 60 Hz rather than a very jittery 59.9 Hz.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Insignia monitor works, so do others
Change-Id: I8aa124d04a90f5dcf9cfa923ed3b693fbb4a06d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e32ce13462101dc60cfed60b6948b7597e93525a
Original-Change-Id: Ia9804afe8011a915e4bec306e863d34ad7e27be5
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309540
Original-Reviewed-by: Stphane Marchesin <marcheu@chromium.org>
Original-(cherry picked from commit 7f32c9f460991e5e3b947117d6ae4080e630a532)
Original-Reviewed-on: https://chromium-review.googlesource.com/309576
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12443
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The set to say that a standard timing was supported was not properly in
the "if" test. That meant that even when standard timings weren't
supported, we thought that they were. That had the side effect of never
using the detailed mode.
BRANCH=none
BUG=chrome-os-partner:46998
TEST=Adafruit panel works now
Change-Id: Ide3ed6c5682840f808d854755dac58e9057e6bda
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c99d3ee8d163fc6be207c5a7df2a7aecd7af7849
Original-Change-Id: Ib67735219fd28516857d9b63f1ba156573f1bea3
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309521
Original-(cherry picked from commit 4e4c2816e2239299bc02e3a57fb18056db62b56c)
Original-Reviewed-on: https://chromium-review.googlesource.com/309552
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12442
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The detailed_cvt_descriptor() function takes a parameter "out" for no
good reason. Remove it.
BRANCH=none
BUG=chrome-os-partner:46998
TEST=Build and boot
Change-Id: I1042dba9ddf2b4b543bd07615013088be5055950
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5c3474c9b1f9fb73f44d64d3a0592f92339da2df
Original-Change-Id: I4d695a6dba6606d2132578ce0ab4cb612c83d0f4
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309598
Original-(cherry picked from commit 39122e242e808d71a4e274e8a23e9a63f4984388)
Original-Reviewed-on: https://chromium-review.googlesource.com/309496
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12441
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes the old arm64/stage_entry.S code that was too
specific to the Tegra SoC boot flow, and replaces it with code that
hides the peculiarities of switching to a different CPU/arch in ramstage
in the Tegra SoC directories.
BRANCH=None
BUG=None
TEST=Built Ryu and Smaug. !!!UNTESTED!!!
Change-Id: Ib3a0448b30ac9c7132581464573efd5e86e03698
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12078
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When we first added ARM support to coreboot, it was clear that the
bootblock would need to do vastly different tasks than on x86, so we
moved its main logic under arch/. Now that we have several more
architectures, it turns out (as with so many things lately) that x86 is
really the odd one out, and all the others are trying to do pretty much
the same thing. This has already caused maintenance issues as the ARM32
bootblock developed and less-mature architectures were left behind with
old cruft.
This patch tries to address that problem by centralizing that logic
under lib/ for use by all architectures/SoCs that don't explicitly
opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option).
This works great out of the box for ARM32 and ARM64. It could probably
be easily applied to MIPS and RISCV as well, but I don't have any of
those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and
leave that for later cleanup.
BRANCH=None
BUG=None
TEST=Built Jerry and Falco, booted Oak.
Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
HDMI driver need to know whether the monitor is DVI
or HDMI interface, so this commit just introduce a
new number 'hdmi_monitor_detected' to struct edid.
There were four bits to indicate the monitor interfaces,
it's better to take use of that. But those bits only
existed in EDID 1.4 version, but didn't persented in
the previous EDID version, so I decided to detect the
hdmi cea block.
BRANCH=none
BUG=chrome-os-partner:43789
TEST=When mickey connect with HDMI monitor, see 'hdmi_monitor_detected' is 'true'.
When mickey connect with DVI monitor, see 'hdmi_monitor_detected' is 'false'.
Change-Id: I1a4f1410e1cce1474ffae858db161a18578cac3a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 409f041805d9fdff2d49faa1a3a262cf4dc609c2
Original-Change-Id: Ife770898b0f2b4f58b8259711101a0cab4a5e4ac
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309055
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Per IRC and Gerrit discussion, the normal / fallback
selector code is a rather weak spot in coreboot, and
did not function correctly for certain use cases.
Rework the selector to more clearly indicate proper
operation, and also remove dead code. Also tentatively
abandon use of RTC bit 385; a follow-up patch will
remove said bit from all affected mainboards.
The correct operation of the fallback code selector
approximates that of a power line recloser, with
a user option to attempt normal boot that can be
cleared by firmware, but never set by firmware.
Additionally, if cleared by user, the fallback
path should always be used on the next reboot.
Change-Id: I753ae9f0710c524875a85354ac2547df0c305569
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12289
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
In order to not expose the cbmem data structures to userland
that are used by coreboot internally add each of the cbmem
entries to a coreboot table record. The payload ABI uses
coreboot tables so this just provides a shortcut for cbmem
entries which were manually added previously by doing the
work on behalf of all entries.
A cursor structure and associated functions are added to
the imd code for walking the entries in order to be placed
in the coreboot tables. Additionally a struct lb_cbmem_entry
is added that lists the base address, size, and id of the
cbmem entry.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Booted glados. View coreboot table entries with cbmem.
Change-Id: I125940aa1898c3e99077ead0660eff8aa905b13b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11757
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This aids the fuzzer test case.
Change-Id: Ic7d43b76cf5660e085e7b3b13499de0358c13197
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12181
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
