summaryrefslogtreecommitdiff
path: root/src/lib
AgeCommit message (Collapse)Author
2014-01-22CBMEM: Rename cbmem_reinit()Kyösti Mälkki
This function does not really initialize anything, but only checks for the TOC. Change-Id: I9d100d1823a0b630f5d1175e42a6a15f45266de4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4669 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-01-22CBMEM: Replace cbmem_initialize() with cbmem_recovery()Kyösti Mälkki
The replacement function confirms CBMEM TOC is wiped clean on power cycles and resets. It also introduces compatibility interface to ease up transition to DYNAMIC_CBMEM. Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4668 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-01-14lib: Add log2 ceiling functionAlexandru Gagniuc
Change-Id: Ifb41050e729a0ce314e4d4918e46f82bc7e16bed Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4684 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-14lib/hexdump: Take const void * and size_t as argumentsAlexandru Gagniuc
Representing a memory location as an unsigned long is specific to 32-bit architectures. It also doesn't make sense to represent a length assumed to be positive as a signed integer. With this change, it is no longer necessary to cast a pointer to unsigned long when passing it to hexdump. Change-Id: I641777d940ceac6f37c363051f1e9c1b3ec3ed95 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4575 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-13lib: Make log2() available in romstage on ARM, not just x86Alexandru Gagniuc
On x86, log2() is defined as an inline function in arch/io.h. This is a remnant of ROMCC, and forced us to not include clog2.c in romstage. As a result, romstage on ARM has no log2(). Use the inline log2 only with ROMCC, but otherwise, use the one in clog2.c. Change-Id: Ifef2aa0a7b5a1db071a66f2eec0be421b8b2a56d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4681 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-12lib/cbfs_core.c: Supply size of file as well in cbfs_get_file_contentVladimir Serbinenko
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4659 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-01-06CBMEM: Fix allocation for static CBMEMKyösti Mälkki
CBMEM console buffer size is adjustable in menuconfig, but this would not correctly adjust the overall allocation made for CBMEM. HIGH_MEMORY_SIZE is aligned to 64kB and definitions are moved down in the header file as HIGH_MEMORY_SIZE is not used with DYNAMIC_CBMEM. Try to continue boot even if CBMEM cannot be created. This error would only occur during development of new ports anyways and more log output is better. Change-Id: I4ee2df601b12ab6532ffcae8897775ecaa2fc05f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4621 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-01-06CBMEM: Drop cbmem_base_check()Kyösti Mälkki
This function was for logging only, but we have both base and size already logged elsewhere. Change-Id: Ie6ac71fc859b8fd42fcf851c316a5f888f828dc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4620 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-01-06CBMEM ACPI: Move resume handlerKyösti Mälkki
Handler is ACPI/x86 specific so move details out of cbmem code. With static CBMEM initialisation, ramstage will need to test for S3 wakeup condition so publish also acpi_is_wakeup(). Change-Id: If591535448cdd24a54262b534c1a828fc13da759 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4619 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
Clean up superfluous line terminators. Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4562 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-21Pit: graphicsRonald G. Minnich
This includes the new dp code, which is better, and the fimd code, which is changed and improved. We took the chance to remove un-needed files, and also to remove some foolish u-boot habits, but not all of them. That will take time. With these changes we get graphics. Since the only mainboards we have with 16 bit graphics are 5:6:5, adjust edid.c to just use that format. If at some future time we need 4:4:4, which seems unlikely, we'll need to add a function to adjust the lb_framebuffer. Note that you can't just divine this from the EDID, as the graphics pipe format need not match the actual final format used. The EDID reading works. We've been requested to support hard-coded EDIDs and that will come in the next revision. Currently the hard-coded EDID is ignored for testing. Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64240 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
Works fine with all three panels with the change of 6 bits per color. Change-Id: Ia47d152e62d1879150d8cf9a6657b62007ef5c0e Reviewed-on: https://gerrit.chromium.org/gerrit/63762 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4402 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add simple hexdump functionStefan Reinauer
- prints hex and ascii - detects duplicate all zero lines Change-Id: I557fed34f0f50ae256a019cf893004a0d6cbff7c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62655 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4392 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Added structure members x_mm and y_mm to edid decodingFurquan Shaikh
Change-Id: I9a628cec4da127a3f072d9611259dad99dfa9d29 Reviewed-on: https://gerrit.chromium.org/gerrit/63125 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4382 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
... based on the EDID detailed timing values for pixel_clock and link_clock. Two undocumented registers 0x6f040 and 0x6f044 correspond to link_m and link_n respectively. Other two undocumented registers 0x6f030 and 0x6f034 correspond to data_m and data_n respectively. Calculations are based on the intel_link_compute_m_n from linux kernel. Currently, the value for 0x6f030 does not come up right with our calculations. Hence, set to hard-coded value. Change-Id: I40ff411729d0a61759164c3c1098504973f9cf5e Reviewed-on: https://gerrit.chromium.org/gerrit/62915 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4381 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-12EDID: add fields specialized to the needs of framebuffersRonald G. Minnich
Now that we have horizontal display areas that are not multiples of 32 bytes, things are more complex. We add three struct members (x, y resolution and bytes per line) which are to be filled in by the mainboard as it sets the mode. In future, the EDID code may take a stab at initializing these but the values are context-dependent. Change-Id: Ib9102d6bbf8c66931f5adb1029a04b881a982cfe Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60514 Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4336 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03Drop obsolete CONSOLE_LOGBUFStefan Reinauer
This was used by Ron 13ys ago and was never used again ever since. Change-Id: I8ae8a570d67fa0b34b17c9e3709845687f73c724 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59320 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4256 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-02global: Fix usage of get_option() to make use of CB_CMOS_ codesAlexandru Gagniuc
Do not directly check the return value of get_option, but instead compare the returned value against a CB_CMOS_ error code, or against CB_SUCCESS. Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-01Fix build with USE_OPTION_TABLEKyösti Mälkki
Parallelized build might try to build SMM before option_table.h is created. Remove related redundant explicit rules. Change-Id: Ida8b5c408af05adcf3210ce7bfc8a1e5959194c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4299 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-30CBMEM console: increase temporary buffer size for non-dynamic CBMEMKyösti Mälkki
Make temporary buffer allocation equal with the allocation in CBMEM and let copy_console_buffer() handle possible truncation. When not using dynamic CBMEM the CBMEM area is initialized late in the ramstage and should be able to hold almost as many characters as the CBMEM can hold. We have seen 40000 was not always enough with logging level set to spew, new default size is 0x10000. Change-Id: If4b143fdf807e28b6766b8b99db5216b767948d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4295 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-30cbmem console: reduce temporary buffer size for dynamic CBMEMStefan Reinauer
When using dynamic CBMEM the CBMEM area is initialized before entering ram stage, and so we need a way smaller temporary buffer for the CBMEM console during early bits of ram stage. In practice around 256 bytes are needed, but keep the buffer at 1k so we make sure we don't run out. TEST=Boot tested on pit BRANCH=none BUG=none Change-Id: I462810b7bafbcc57f8e5f9b1d1f38cfdf85fa630 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> [km: cherry-pick 7fd1bbc0 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4293 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-30CBMEM console: Prevent buffer overrunKyösti Mälkki
Make sure memcpy target and a possible message telling log was truncated stay within the allocated region for CBMEM console. This fixes observed CBMEM corruption on platforms that do not use CBMEM console during romstage. Those platforms will need an additional fix to reset cursor position to zero on s3 resume. Change-Id: I76501ca3afc716545ca76ebca1119995126a43f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4292 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-11-26Clean up POST codes for Boot State machineDuncan Laurie
Now that there is a clearly defined boot state machine we can add some useful post codes to indicate the current point in the state machine by having it log a post code before the execution of each state. This removes the currently defined POST codes that were used by hardwaremain in favor of a new contiguous range that are defined for each boot state. The reason for this is that the existing codes are mostly used to indicate when something is done, which is confusing for actual debug because POST code debugging relies on knowing what is about to happen (to know what may be at fault) rather than what has just finished. One additonal change is added during device init step as this step often does the bulk of the work, and frequently logs POST codes itself. Therefore in order to keep better track of what device is being initialized POST_BS_DEV_INIT is logged before each device is initialized. interrupted boot with reset button and gathered the eventlog. Mosys has been extended to decode the well-known POST codes: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: Ida1e1129d274d28cbe8e49e4a01483e335a03d96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58106 Reviewed-on: http://review.coreboot.org/4231 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-23lib/coreboot_table: set type and size of framebuffer tag after ↵Vladimir Serbinenko
fill_lb_framebuffer When testing Ron's patch on qemu I found out that fill_lb_framebuffer overwrites size and tag fields. We need either to fix/check all fill_lb_framebuffer implementations or write tag/size after fill_lb_framebuffer. I prefer later as it's more robust. Change-Id: I98f5bac14f65fb4d990cb21426d402b27f2e8a48 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4263 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-18cbfs: 64-bit cleanupsRonald G. Minnich
cbfs used u32 in a number of cases where uintptr_t was correct. This change builds for both 64-bit and 32-bit boards. Change-Id: If42c722a8a9e8d565d3827f65ed6c2cb8e90ba60 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/4037 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-11-18cbfs: remove unused code and prototypeRonald G. Minnich
The code is wrong (it's calling ntohl on an entry point that is actually already le due to an old cbfs bug) and nothing calls it any more anyway. Change-Id: Ief2c33faf99e3d2fc410524a5aae7bde378f088b Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/4090 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-11-08Add new finalize functions for devices and chipsMarc Jones
Many chipset devices require additional configuration after device init. It is not uncommmon for a device early in the devicetree list to need to change a setting after a device later in the tree does PCI init. A final function call has been added to device ops to handle this case. It is called prior to coreboot table setup. Another problem that is often seen is that the chipset or mainboard need to do some final cleanup just before loading the OS. The chip finalize has been added for this case. It is call after all coreboot tables are setup and the payload is ready to be called. Similar functionality could be implemented with the hardwaremain states, but those don't fit well in the device tree function pointer structure and should be used sparingly. Change-Id: Ib37cce104ae41ec225a8502942d85e54d99ea75f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4012 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-10-22usbdebug: Fix boards without EARLY_CBMEM_INITKyösti Mälkki
The main usbdebug file lib/usbdebug.c was removed from romstage build with commit f8bf5a10 but the chipset-specific parts were not, leading to unresolved symbol errors for AMD platforms. Add a silent Kconfig variable USBDEBUG_IN_ROMSTAGE for convenient use of this feature. Change-Id: I0cd3fccf2612cf08497aa5c3750c89bf43ff69be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3983 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-15Have option of timestamps, CBMEM console and usbdebug for most boardsKyösti Mälkki
As boards without EARLY_CBMEM_INIT do not initialize CBMEM in romstage, and have no CAR migration, these features are available for ramstage only. Change-Id: Ic3f77ccdedd4e71ba693619c02c9b98b328a0882 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3970 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-15timestamps: Fix some lost timestamps for romstageKyösti Mälkki
Timestamps from cbfs_and_run, TS_START_COPYRAM and TS_END_COPYRAM, were lost with commit b766b1c7. Reason is variable ts_table was referencing CAR storage after CAR is torn doesn. Add use of car_get_var() / car_set_var() so the references go to migrated storage in CBMEM. Change-Id: I5a942ad7fd59a04e3a5255f4a3636d37dcfc1591 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-13Rename cpu/x86/car.h to arch/early_variables.hStefan Reinauer
and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21ROMCC boards: Fix builds with CBMEM console, timestamps or usbdebugKyösti Mälkki
These features depend on CAR_GLOBAL region, which is not available when romstage is built with ROMCC. Exclude these from romstage, keep them available for ramstage. A follow-up patch will fix the dependencies and allows enabling these features in menuconfig. Change-Id: I9de5ad41ea733655a3fbdc734646f818e39cc471 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3919 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM console: Support late initKyösti Mälkki
It is not compulsory to have CBMEM console initialised in romstage, so try add the CBMEM table entry again in ramstage, if not found. Change-Id: I96ab502df7f05d6bf1d6e6fa84d395ef6306b525 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3915 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Only collect from BSP CPUKyösti Mälkki
We only have one table to collect timestamps into. Change-Id: I80180fe9a05226f0351c3e66eacaf2d0cb82c924 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3912 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Use stash before CBMEM is usableKyösti Mälkki
Change-Id: I9e927abdb1d7d9c233de5620a9a65b419e803ebf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-20usbdebug: Allow an USB hub on the debug dongleKyösti Mälkki
Some development kits with USB 2.0 HS OTG have an USB hub instead of being directly connected to the USB host/device controller. Send the necessary initialisation sequence, using HUB CLASS requests of PORT_POWER and PORT_RESET to enable a pre-selected port number where a device supporting debug descriptor is located. This also adds the Kconfig option for BeagleBone. Change-Id: I7a5d0ba0962a9ca06bf3196232ed4a03bdfb2b06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3925 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-11CBMEM: Rename high_tables variables and make them staticKyösti Mälkki
Old name was too much x86. All external references have been removed. Change-Id: I982b9abfcee57a7ea421c245dadb84342949efae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3906 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Drop parameters from cbmem_init()Kyösti Mälkki
The parameters can be dropped as initialisation always happens for the region resolved with cbmem_locate_table(). This is no longer referenced externally, make it static. Change-Id: Ia40350a5232dcbf30aca7b5998e7995114c44551 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3565 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Drop parameter from cbmem_reinit()Kyösti Mälkki
Function is always called with get_top_of_ram() - HIGH_MEMORY_SIZE which equals cbmem_base, thus no need to pass it as a parameter. Change-Id: If026cb567ff534716cd9200cdffa08b21ac0c162 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3564 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM x86: Unify get_cbmem_toc()Kyösti Mälkki
Remove any chipset-specific implementations and use arch-specific implementation of get_cbmem_table() instead. Change-Id: I338ee2c1bd51f5e517462115170dc926e040159e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3907 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Backup top_of_ram instead of cbmem_tocKyösti Mälkki
AMD northbridges have a complex way to resolve top_of_ram. Once it is resolved, it is stored in NVRAM to be used on resume. TODO: Redesign these get_top_of_ram() functions from scratch. Change-Id: I3cceb7e9b8b07620dacf138e99f98dc818c65341 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_locate_table()Kyösti Mälkki
For both romstage and ramstage, this calls an arch-specific function get_cbmem_table() to resolve the base and size of CBMEM region. In ramstage, the result is cached as the query may be relatively slow involving multiple PCI configuration reads. For x86 CBMEM tables are located right below top of low ram and have fixed size of HIGH_MEMORY_SIZE in EARLY_CBMEM_INIT implementation. Change-Id: Ie8d16eb30cd5c3860fff243f36bd4e7d8827a782 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3558 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Unify get_top_of_ram()Kyösti Mälkki
Change-Id: Ic40a51638873642f33c74d80ac41cf082b2fb177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3904 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM tables: Remove references to global high_tables_baseKyösti Mälkki
Unify checks and writing of CBMEM tables for x86 and ARMv7. Change-Id: I89c012bce1b86d0710748719a8840ec532ce6939 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3559 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_late_set_table() and drop references to high_tables_baseKyösti Mälkki
This helper function is for compatibility only for chipsets that do not implement get_top_of_ram() to support early CBMEM. Also remove references to globals high_tables_base and _size under arch/ and from two ARMv7 boards. Change-Id: I17eee30635a0368b2ada06e0698425c5ef0ecc53 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3902 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-06usbdebug: Use CAR migrationKyösti Mälkki
If we already initialized EHCI controller and USB device in romstage, locate active configuration from salvaged CAR_GLOBAL and avoid doing the hardware initialisation again. Change-Id: I7cb3a359488b25abc9de49c96c0197f6563a4a2c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3476 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-06usbdebug: Dump low-level protocol detailsKyösti Mälkki
Dumping these EHCI host controller registers is useful to solve problems with debug devices. Change-Id: I0610cecca57b1b952d4f87211dd00c8c0bc398b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-06usbdebug: Adjust endpoint retry timeoutsKyösti Mälkki
Change Setup Stage of control messages to have no retries, while data and status stages may retry until timing out after 1000 retries. The correct amount of retries might vary by endpoint and device dongle used, so make it a variable. Change-Id: I63313f994d0bd3444a3aab527ca942da5de9e6fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3882 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-06usbdebug: Adjust transaction retriesKyösti Mälkki
Transaction consistently completes with 80 to 150 status reads on my setups. Hardware should always be able to complete this within 125us as the debug port is serviced at the beginning of each microframe. Timeout is set to DBGP_MICROFRAME_TIMEOUT_LOOPS=1000 status reads. Do not retry transactions if this timeout is reached as the host controller probably needs full re-initialisation to recover. If this timeout is not reached, but a transaction is corrupted on the wire, or it is otherwise not properly delivered to the USB device, transaction is retried upto DBGP_MICROFRAME_RETRIES=10 times. Change-Id: I44bc0a1bd194cdb5a2c13d5b81fc39bc568ae054 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3881 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-31Remove NRV2B compression supportPatrick Georgi
It wasn't even hooked up to the build system anymore. Change-Id: I4b962ffd945b39451e19da3ec2f7b8e0eecf2e53 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/3892 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-08-29usbdebug: Fix control messagesKyösti Mälkki
Add support for control messages with a write of data stage. Add status stage after a read of non-zero length data stage. Do not retry control message if device responds with STALL. Change-Id: I16fb9ae39630b975af5461b63d050b9adaccef0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3867 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Use separate data toggle for each pipeKyösti Mälkki
USB defines a mechanism to detect certain cases of lost handshakes using an alternating data sequence number, referred to as data toggling. This patch fixes each pipe to have its own tracking of the data toggle state. Change-Id: I62420bdaeadd0842da3189428a37eeb10c646900 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3865 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Reference endpoints by pipes in callsKyösti Mälkki
Add allocation for endpoint0 as a pipe for control messages. Endpoint number was already stored in the pipe object, place devnum there too, although all pipes will use same devnum==127. Change-Id: I299d139bdd8083af8b04a694e8e41435ec026a25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3864 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Support choice of EHCI controllerKyösti Mälkki
Nowadays, chipsets or boards do not only have one USB port with the capabilities of a debug port but several ones. Some of these ports are easier accessible than others, so making them configurable is also necessary. This change adds infrastructure to switch between EHCI controllers, but does not implement it for any chipset. Change-Id: I079643870104fbc64091a54e1bfd56ad24422c9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3438 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Change debug port scanningKyösti Mälkki
On AMD platforms, setting of USBDEBUG_DEFAULT_PORT=0 tries to scan all physical ports one after other in incrementing order. To avoid possible problems with other USB devices, one can select the port number here and bypass the scan. Intel platforms can communicate with usbdebug dongle on one physical port only, and this option makes no difference there. Change-Id: I45be6cc3aa91b74650eda2d444c9fcad39d58897 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3872 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-24usbdebug: Only test two possible USB device numbersKyösti Mälkki
After an USB device sees USB bus reset on the bus, it will reset to device number 0. Per the EHCI debug port specification, a debug dongle device may reset to the fixed debug device number of 127 instead. Thus there is no need to try device numbers from 1 to 126. Do a sanity-check on a returned debug descriptor as I experienced some USB flash memory to respond on this request with zero-fill data. Change-Id: I78d58f3dc049cd8c20c6e2aa3a4207ad7e6a6d33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3861 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-23usbdebug: Halt host controller before resetting itKyösti Mälkki
Resetting an EHCI controller when it is not halted can have undefined behaviour. This mostly fixes a case where calling usbdebug_init() twice would fail to reset the USB dongle device properly. On amd/persimmon it still requires one extra retry, but at least it is now possible to have usbdebug enabled for both romstage and ramstage. Change-Id: Ib0e6e5a0167404f68af2edf112306fdb8def0be9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3862 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-08-23usbdebug: Do not support logging from SMMKyösti Mälkki
Letting SMI handler touch EHCI controller is an excellent source of USB problems. Remove usbdebug entirely from SMM. It may be possible to make usbdebug console work from SMM after hard work and coordination with payloads and even OS drivers. But we are not there. Change-Id: Id50586758ee06e8d76e682dc6f64f756ab5b79f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3858 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-08-23usbdebug: Add compatibility quirk for FX2Kyösti Mälkki
This quirk is needed with a DIY debug dongle using obsolete CY7C68013 (aka FX2) USB chips. Old revision of chip requires a SET_CONFIGURATION to be sent, while this is not required in EHCI debug port specs. Change-Id: I4926eb19b7e991d6efeef782682756571ad006b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-08-23usbdebug: Block recursive calls of printkKyösti Mälkki
When we create low-level debugging of EHCI controller registers, we call printk() within printk(). In ramstage this would leave us with deadlock waiting on the console spinlock. Change-Id: Idbe029af9af76de27094bb2964c60d9ccfdd96e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3860 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-23usbdebug: Add logging level to debuggingKyösti Mälkki
Increase existing level from DEBUG to INFO. Change-Id: Ic5934aec449f921af96dd3a6524f7275f8de1304 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3859 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-19Don't include LZMA in romstage if ramstage is not compressed.Andrew Wu
If ramstage is not compressed, the CBFS module in romstage doesn't need to support LZMA. Removing the LZMA module in this case can save about 3000 bytes in romstage. Change-Id: Id6f7869e32979080e2985c07029edcb39eee9106 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3878 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15CBFS: Change how the bss is zeroed when loading a stage.Gabe Black
For reasons explained in a previous CL, it might be necessary to "load" a file from CBFS in place. The loading code in CBFS was, however, zeroing the area of memory the stage was about to be loaded into. When the CBFS data is located elsewhere this works fine, but when it isn't you end up clobbering the data you're trying to load. Also, there's no reason to zero memory we're about to load something into or have just loaded something into. This change makes it so that we only zero out the portion of the memory between what was loaded/decompressed and the final size of the stage in memory. Change-Id: If34df16bd74b2969583e11ef6a26eb4065842f57 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15CBFS: Change the signature of cbfs_decompress.Gabe Black
Instead of returning 0 on success and -1 on error, return the decompressed size of the data on success and 0 on error. The decompressed size is useful information to have that was being thrown away in that function. Change-Id: If787201aa61456b1e47feaf3a0071c753fa299a3 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3578 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-10usbdebug: Add option for verbose logging of connectionKyösti Mälkki
Add option to log changes in USB 2.0 EHCI debug port connection. For romstage move usbdebug as the last initialised console so one actually can see these messages. Init order of consoles in ramstage is undetermined and unchanged. Change-Id: I3aceec8a93064bd952886839569e9f5beb6c5720 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3387 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-01Add directive __SIMPLE_DEVICE__Kyösti Mälkki
The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-30usbdebug: Fix missing includeKyösti Mälkki
Change-Id: I74d28c13e6597c56e3b85ccd2b83386b86c200f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3828 Tested-by: build bot (Jenkins)
2013-07-24usbdebug: Split endpoint buffersKyösti Mälkki
Refactor the structure to better support receive and another set of endpoints over usbdebug. Change-Id: Ib0f76afdf4e638363ff30c67010920142c58f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3726 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-15CBFS: Use memmove instead of memcpy when loading a file from CBFS.Gabe Black
It might be the case that a file is being loaded from a portion of CBFS which has already been loaded into a limitted bit of memory somewhere, and we want to load that file in place, effectively, so that it's original location in CBFS overlaps with its new location. That's only guaranteed to work if you use memmove instead of memcpy. Change-Id: Id550138c875907749fff05f330fcd2fb5f9ed924 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3577 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-14Add a HAVE_ARCH_MEMMOVE option to allow overriding memmove.Gabe Black
Change-Id: I4b6a57e7d8e7e685c609b1d85368585b9dd197dc Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11usbdebug: Cleanup dbgp_ehci_info callKyösti Mälkki
Change-Id: I9cad64796fcfb7a50d9ed9ec95c56ab855c872e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3766 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-11Fix CBMEM console use with CAR_MIGRATIONKyösti Mälkki
With EARLY_CBMEM_INIT and CAR_MIGRATION selected, cbmemc_reinit() was called twice during romstage. This effectively deleted output of romstage in CBMEM console. Change-Id: I21072a319c0e4a5f695b0573bc017bf7921fc663 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-10usbdebug: Put ehci_debug_info in CAR_GLOBALKyösti Mälkki
Store EHCI Debug Port runtime variables in CAR_GLOBAL. For platforms without CAR_MIGRATION, logging on EHCI Debug Port is temporarily lost when CAR is torn down at end of romstage. On model_2065x and model_206ax ehci_debug_info was overlapping the MRC variable region and additionally migration used incorrect size for the structure. Change-Id: I5e6c613b8a4b1dda43d5b69bd437753108760fca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3475 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-10usbdebug: Move EHCI BAR relocation codeKyösti Mälkki
There are other uses for EHCI debug port besides console, so move EHCI relocation code from console to lib. Change-Id: I95cddd31be529351d9ec68f14782cc3cbe08c617 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3626 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-10usbdebug: Move ehci_debug_info allocationKyösti Mälkki
Move ehci_debug_info allocation from console to lib, as console code was only built for ramstage. Implement dbgp_ehci_info() to return the EHCI context. Alread alias this as dbgp_console_input() and _output() to return the console stream context later on. Change-Id: Id6cc07d62953f0466df61eeb159e22b0e3287d4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3625 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10usbdebug: Refactor disable logicKyösti Mälkki
Output to usbdebug console needs to be disabled until hardware is initialized and while EHCI BAR is relocated. Add separate field ehci_info to point to back to EHCI context when hardware is ready to transfer data. Change-Id: If7d441b561819ab8ae23ed9f3f320f7742ed231e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3624 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-10Drop ELF remains from boot codeStefan Reinauer
This stuff is not used, so let's drop it. Change-Id: I671a5e87855b4c59622cafacdefe466ab3d70143 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3660 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10lib: Fix spellingMartin Roth
Change-Id: I999987af9cb44906e3c3135c0351a0cd6eb210ff Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3756 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10FUI: reorganize include filesRonald G. Minnich
We've got enough of a handle on this to realize some things: drm_dp_helper.h is by design device and architecture independent i915.h is common to most intel graphics chipsets going back several years i915_reg.h is as well Move these files to src/include/device, and adjust the .c files accordingly. Change-Id: I07512b3695fea0b22949074b467986420783d62a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3637 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Provide support for setting up the framebuffer from EDIDRonald G. Minnich
Add three functions to edid.c: void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr) takes an edid and uintptr_t, and fills in a static lb_framebuffer struct as well as setting the static vbe_valid to 1 unless some problem is found in the edid. The intent here is that this could be called from the native graphics setup code on both ARM and x86. int vbe_mode_info_valid(void) returns value of the static vbe_valid. void fill_lb_framebuffer(struct lb_framebuffer *framebuffer) copies the static edid_fb to lb_framebuffer. There is now a common vbe.h in src/include, removed the two special ones. In general, graphics in coreboot is a mess, but graphics is always a mess. We don't have a clean way to try two different ways to turn on a device and use the one that works. One battle at a time. Overall, things are much better. The best part: this code would also work for ARM, which also uses EDID. Change-Id: Id23eb61498b331d44ab064b8fb4cb10f07cff7f3 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-24AMD Fam15tn: Add support for AGESA runtime allocation in CBMEMRudolf Marek
The IOMMU AGESA needs a reserved scratch space and it wants to allocate the stuff for runtime. So provide a simple allocator for 4 KB CBMEM page. Change-Id: I53bdfcd2cd69f84fbfbc6edea53a051f516c05cc Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3315 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-21Dynamic cbmem: don't compile src/lib/cbmem.c when dynamic cbmem is selected.Denis 'GNUtoo' Carikli
src/lib/cbmem.c is for the static cbmem. Thanks to adurbin for the Makefile.inc pointer and code on #coreboot IRC channel on freenode: <adurbin> no. if you have CONFIG_DYNAMIC_CBMEM then cbmem.c shouldn't be compiled [...] <adurbin> +ifeq ($(CONFIG_EARLY_CBMEM_INIT),y) <adurbin> +ifneq ($(CONFIG_DYNAMIC_CBMEM),y) romstage-$(CONFIG_EARLY_CBMEM_INIT) += cbmem.c <adurbin> +endif <adurbin> +endif Without that fix we have: src/lib/cbmem.c:58:43: error: no previous prototype for 'get_cbmem_toc' [-Werror=missing-prototypes] src/lib/cbmem.c:76:6: error: no previous prototype for 'cbmem_init' [-Werror=missing-prototypes] src/lib/cbmem.c:107:5: error: no previous prototype for 'cbmem_reinit' [-Werror=missing-prototypes] This commit was tested on qemu-i440fx with the following commit: qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM ( http://review.coreboot.org/#/c/3504/ ). Change-Id: I98636aad4bb4b954f3ed3957df67c77f3615964a Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3503 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-20fix bootstate typo (bs_dev_eanble -> bs_dev_enable)David Hendricks
Change-Id: I2e3fd58404c48e863a3a1b255337fb397086651b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3506 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19edid: fix warningGerd Hoffmann
src/lib/edid.c:1177: error: ‘y’ may be used uninitialized in this function Warning is bogus, but seems my gcc (4.4.7 as shipped by RHEL-6) isn't clever enougth to figure this on its own. So help a bit by explicitly initializing the variable. Change-Id: Ia9f966c9c0a6bd92a9f41f1a4a3c8e49f258be37 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3501 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12usbdebug: Improve solving EHCI debug port problemsKyösti Mälkki
Add comment how one can debug the usbdebug hardware init. Do not send printk's to usbdebug console when one is debugging the usbdebug console initialisation itself. Change-Id: I21a285cb31cf64e853bc626f8b6a617bc5a8be19 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3382 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-10ramtest.c: Add silent ram_checkAlexandru Gagniuc
In some cases, we want a ram_check that does not die and does not clobber the terminal with useless output that slows us down a lot. Usage examples include Checking if the RAM is up at the start of raminit, or checking if each rank is accessible as it is being initialized. As with all other ram_checks, this is more of a "Is my DRAM properly configured?" test, which is exactly what we want for something to use during memory initialization. Change-Id: I95d8d9a2ce1e29c74ef97b90aba0773f88ae832c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3416 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-16cbmem console: use cache-as-ram API and cleanupAaron Durbin
Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08cbfs_core.c: make cfbs searches even less verboseDave Frodin
The cbfs core code would print out the name of the file it is searching for and when it is found would print out the name again. This contributes to a lot of unnecessary messages in a functioning payload’s output. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: Ib238ff174bedba8eaaad8d1d452721fcac339b1a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3208 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-07boot state: remove drain timers optionAaron Durbin
Internally there were states that had an attribute to indicate that the timers needed to be drained. Now that there is a way to block state transitions rely on this ability instead of draining timers. The timers will drain themselves when a state is blocked. Change-Id: I59be9a71b2fd5a17310854d2f91c2a8957aafc28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3205 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-07boot state: add ability to block state transitionsAaron Durbin
In order to properly sequence the boot state machine it's important that outside code can block the transition from one state to the next. When timers are not involved there's no reason for any of the existing code to block a state transition. However, if there is a timer callback that needs to complete by a certain point in the boot sequence it is necessary to place a block for the given state. To that end, 4 new functions are added to provide the API for blocking a state. 1. boot_state_block(boot_state_t state, boot_state_sequence_t seq); 2. boot_state_unblock(boot_state_t state, boot_state_sequence_t seq); 3. boot_state_current_block(void); 4. boot_state_current_unblock(void); Change-Id: Ieb37050ff652fd85a6b1e0e2f81a1a2807bab8e0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3204 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03cbfs: make searching for a file less verboseAaron Durbin
The cbfs core code would print out all unmatched file names when searching for a file. This contributes to a lot of unnecessary messages in the boot log. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: I1e46a4b21d80e5d2f9b511a163def7f5d4e0fb99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3131 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)