summaryrefslogtreecommitdiff
path: root/src/lib
AgeCommit message (Collapse)Author
2016-10-07soc/intel/apollolake: Implement stage cache to improve resume timeBrandon Breitenstein
This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-06arm64: Use 'payload' format for ATF instead of 'stage'Simon Glass
Switch the BL31 (ARM Trusted Firmware) format to payload so that it can have multiple independent segments. This also requires disabling the region check since SRAM is currently faulted by that check. This has been tested with Rockchip's pending change: https://chromium-review.googlesource.com/#/c/368592/3 with the patch mentioned on the bug at #13. BUG=chrome-os-partner:56314 BRANCH=none TEST=boot on gru and see that BL31 loads and runs. Im not sure if it is correct though: CBFS: Locating 'fallback/payload' CBFS: Found @ offset 1b440 size 15a75 Loading segment from ROM address 0x0000000000100000 code (compression=1) New segment dstaddr 0x18104800 memsize 0x117fbe0 srcaddr 0x100038 filesize 0x15a3d Loading segment from ROM address 0x000000000010001c Entry Point 0x0000000018104800 Loading Segment: addr: 0x0000000018104800 memsz: 0x000000000117fbe0 filesz: 0x0000000000015a3d lb: [0x0000000000300000, 0x0000000000320558) Post relocation: addr: 0x0000000018104800 memsz: 0x000000000117fbe0 filesz: 0x0000000000015a3d using LZMA [ 0x18104800, 18137d90, 0x192843e0) <- 00100038 Clearing Segment: addr: 0x0000000018137d90 memsz: 0x000000000114c650 dest 0000000018104800, end 00000000192843e0, bouncebuffer ffffffffffffffff Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 0 run 125150 exit 1 Jumping to boot code at 0000000018104800(00000000f7eda000) CPU0: stack: 00000000ff8ec000 - 00000000ff8f0000, lowest used address 00000000ff8ef3d0, stack used: 3120 bytes CBFS: 'VBOOT' located CBFS at [402000:44cc00) CBFS: Locating 'fallback/bl31' CBFS: Found @ offset 10ec0 size 8d0c Loading segment from ROM address 0x0000000000100000 code (compression=1) New segment dstaddr 0x10000 memsize 0x40000 srcaddr 0x100054 filesize 0x8192 Loading segment from ROM address 0x000000000010001c code (compression=1) New segment dstaddr 0xff8d4000 memsize 0x1f50 srcaddr 0x1081e6 filesize 0xb26 Loading segment from ROM address 0x0000000000100038 Entry Point 0x0000000000010000 Loading Segment: addr: 0x0000000000010000 memsz: 0x0000000000040000 filesz: 0x0000000000008192 lb: [0x0000000000300000, 0x0000000000320558) Post relocation: addr: 0x0000000000010000 memsz: 0x0000000000040000 filesz: 0x0000000000008192 using LZMA [ 0x00010000, 00035708, 0x00050000) <- 00100054 Clearing Segment: addr: 0x0000000000035708 memsz: 0x000000000001a8f8 dest 0000000000010000, end 0000000000050000, bouncebuffer ffffffffffffffff Loading Segment: addr: 0x00000000ff8d4000 memsz: 0x0000000000001f50 filesz: 0x0000000000000b26 lb: [0x0000000000300000, 0x0000000000320558) Post relocation: addr: 0x00000000ff8d4000 memsz: 0x0000000000001f50 filesz: 0x0000000000000b26 using LZMA [ 0xff8d4000, ff8d5f50, 0xff8d5f50) <- 001081e6 dest 00000000ff8d4000, end 00000000ff8d5f50, bouncebuffer ffffffffffffffff Loaded segments INFO: plat_rockchip_pmusram_prepare pmu: code d2bfe625,d2bfe625,80 INFO: plat_rockchip_pmusram_prepare pmu: code 0xff8d4000,0x50000,3364 INFO: plat_rockchip_pmusram_prepare: data 0xff8d4d28,0xff8d4d24,4648 NOTICE: BL31: v1.2(debug): NOTICE: BL31: Built : Sun Sep 4 22:36:16 UTC 2016 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: plat_rockchip_pmu_init(1189): pd status 3e INFO: BL31: Initializing runtime services INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x18104800 INFO: SPSR = 0x8 Change-Id: Ie2484d122a603f1c7b7082a1de3f240aa6e6d540 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c1d75bff6e810a39776048ad9049ec0a9c5d94e Original-Change-Id: I2d60e5762f8377e43835558f76a3928156acb26c Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376849 Original-Commit-Ready: Simon Glass <sjg@google.com> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16706 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-02TPM2: Fill in empty tlcl_resume function in TPM2 tlclFurquan Shaikh
On resume, TPM2_Starup(STATE) command needs to be sent to the TPM. This ensures that TPM restores the state saved at last Shutdown(STATE). Since tlcl_resume and tlcl_startup both use the same sequence for sending startup command with different arguments, add a common function that can be used by both. BUG=chrome-os-partner:58043 BRANCH=None TEST=Verified that on resume coreboot no longer complains about index read for 0x1007. Return value is 0 as expected. Change-Id: Ib8640acc9cc9cdb3ba5d40e0ccee5ca7d67fa645 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16832 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20selfboot: Move the usable-RAM check into a functionSimon Glass
In preparation for making this check optional, move it into its own function. load_self_segments() is already long and we don't want to make it longer. BUG=chrome-os-partner:56314 BRANCH=none TEST=boot on gru and see that BL31 loads and runs correctly Change-Id: If48d2bf485a23f21c5599670e77a7b8b098f1a88 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 2381e02efa2033857ac06acbc4f0c0dd08de1080 Original-Change-Id: I005e5e4d9b2136605bdd95e9060655df7a8238cb Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381092 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16585 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19arch/x86,lib: make cbmem console work in postcar stageAaron Durbin
Implement postcar stage cbmem console support. The postcar stage is more like ramstage in that RAM is already up. Therefore, in order to make the cbmem console reinit flow work one needs the cbmem init hook infrastructure in place and the cbmem recovery called. This call is added to x86/postcar.c to achieve that. Additionally, one needs to provide postcar stage cbmem init hook callbacks for the cbmem console library to use. A few other places need to become postcar stage aware so that the code paths are taken. Lastly, since postcar is backed by ram indicate that to the cbmem backing store. BUG=chrome-os-partner:57513 Change-Id: I51db65d8502c456b08f291fd1b59f6ea72059dfd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16619 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19Add minimal GNAT run time system (RTS)Nico Huber
Add a stripped-down version of libgnat. This is somehow comparable to libgcc but for Ada programs. It's licensed under GPLv3 but with the runtime library exception. So it's totally fine to link it with our GPLv2 code and keep it under GPLv2. Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/11836 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-09-08edid: Fix a function signatureNico Huber
Change-Id: Id69cecb5cdd21c2d92aca74658f39c790f7b7b01 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/15211 Tested-by: build bot (Jenkins)
2016-09-08lib: Enable hexdump in verstageDuncan Laurie
Enable the hexdump function in verstage as it can be useful there for debugging I2C and TPM transactions. Change-Id: If9dc4bcc30964e18ff5d8a98559f6306c0adec6f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16528 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07src/lib: Fix checkpatch warningsStefan Reinauer
The script checkpatch.pl complains about these files. Fix the warnings. Change-Id: I4271cc35bb101447a316a75273cf8a6e95ed62d5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/16011 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-06tpm2: Fix tlcl and marshaling code for CAR usageDuncan Laurie
Fix a few more instances of global variable usage in the tlcl and marshaling code for tpm2. For the tlcl case this buffer doesn't need to be static as it isn't used after this function exits. Change-Id: Ia739c81d79c6cee9046ae96061045fe4f7fb7c23 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16393 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-08-31Provide CAR decoration for tpm2 staticsVictor Prupis
Decorated tpm2 statics with CAR_GLOBAL BUG=chrome-os-partner:55083 BRANCH=none TEST=none Change-Id: I85620d5c6ffddab5514c01c2c652670bf33b4e7e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ae43d3bb7fed5b891ed38cd268bfe4e1416b77e2 Original-Change-Id: I871442ec096836a86870f8d53a3058c9c040cff8 Original-Signed-off-by: Victor Prupis <vprupis@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/373243 Original-Commit-Ready: Stefan Reinauer <reinauer@google.com> Original-Tested-by: Stefan Reinauer <reinauer@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16366 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27cbmem: Always maintain backing store struct in a global on non-x86Julius Werner
The current CBMEM code contains an optimization that maintains the structure with information about the CBMEM backing store in a global variable, so that we don't have to recover it from cbmem_top() again every single time we access CBMEM. However, due to the problems with using globals in x86 romstage, this optimization has only been enabled in ramstage. However, all non-x86 platforms are SRAM-based (at least for now) and can use globals perfectly fine in earlier stages. Therefore, this patch extends the optimization on those platforms to all stages. This also allows us to remove the requirement that cbmem_top() needs to return NULL before its backing store has been initialized from those boards, since the CBMEM code can now keep track of whether it has been initialized by itself. Change-Id: Ia6c1db00ae01dee485d5e96e4315cb399dc63696 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16273 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27cbfs: Add "struct" file type and associated helpersJulius Werner
This patch adds functionality to compile a C data structure into a raw binary file, add it to CBFS and allow coreboot to load it at runtime. This is useful in all cases where we need to be able to have several larger data sets available in an image, but will only require a small subset of them at boot (a classic example would be DRAM parameters) or only require it in certain boot modes. This allows us to load less data from flash and increase boot speed compared to solutions that compile all data sets into a stage. Each structure has to be defined in a separate .c file which contains no functions and only a single global variable. The data type must be serialization safe (composed of only fixed-width types, paying attention to padding). It must be added to CBFS in a Makefile with the 'struct' file processor. Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-23memlayout: Ensure TIMESTAMP() region is big enough to avoid BUG()Julius Werner
The timestamp code asserts that the _timestamp region (allocated in memlayout for pre-RAM stages) is large enough for the assumptions it makes. This is good, except that we often initialize timestamps extremely early in the bootblock, even before console output. Debugging a BUG() that hits before console_init() is no fun. This patch adds a link-time assertion for the size of the _timestamp region in memlayout to prevent people from accidentally running into this issue. Change-Id: Ibe4301fb89c47fde28e883fd11647d6b62a66fb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16270 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-19lib/fmap: provide RW region device supportAaron Durbin
Explicitly provide a RW view of an FMAP region. This is required for platforms which have separate implementations of a RO boot device and a RW boot device. BUG=chrome-os-partner:56151 Change-Id: Ibafa3dc534f53a3d90487f3190c0f8a2e82858c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16203 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19drivers/spi: ensure SPI flash is boot device for coreboot tablesAaron Durbin
The spi_flash_probe() routine was setting a global varible unconditonally regardless if the probe was for the boot device or even if the boot devcie was flash. Moreover, there's no need to report the SPI information if the boot device isn't even SPI. Lastly, it's possible that the boot device is a SPI flash, but the platform may never probe (selecting SPI_FLASH) for the actual device connected. In that situation don't fill anything in as no correct information is known. BUG=chrome-os-partner:56151 Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16197 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19lib/boot_device: add RW boot device constructAaron Durbin
The current boot device usage assumes read-only semantics to the boot device. Any time someone wants to write to the boot device a device-specific API is invoked such as SPI flash. Instead, provide a mechanism to retrieve an object that can be used to perform writes to the boot device. On systems where the implementations are symmetric these devices can be treated one-in-the-same. However, for x86 systems with memory mapped SPI the read-only boot device provides different operations. BUG=chrome-os-partner:55932 Change-Id: I0af324824f9e1a8e897c2453c36e865b59c4e004 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16194 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-19drivers/spi: move cbfs_spi.c locationAaron Durbin
The common boot device spi implementation is very much specific to SPI flash. As such it should be moved into that subdirectory. It's still a high-level option but it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally that allows the auto-selection of SPI_FLASH by a platform selecting COMMON_CBFS_SPI_WRAPPER which allows for culling of SPI_FLASH selections everywhere. BUG=chrome-os-partner:56151 Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16212 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16228 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-15Revert "Kconfig: separate memory mapped boot device from SPI"Aaron Durbin
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d. This was submitted out of order. Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16226 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-15Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16193 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-04lib/timestamp: Add timestamps to CBMEM in POSTCAR stageFurquan Shaikh
POSTCAR stage has cbmem online. So, all timestamps need to be added to cbmem timestamp region. BUG=chrome-os-partner:55848 TEST=Verified that timestamps added in postcar show up in cbmem -t. Change-Id: I64af8c1e67b107d9adb09de57c20ea728981f07c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16032 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31src/lib: Capitalize ROM, RAM, NVRAM and CPUElyes HAOUAS
Change-Id: Id0871b0c2eb31e2d728180b44cc5b518b751add4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15985 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28skylake/mainboard: Define mainboard hook in bootblockSubrata Banik
Move mainboard post console init functionality (google_chrome_ec_init & early_gpio programming) from verstage to bootblock. Add chromeos-ec support in bootblock BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu till POST code 0x34 Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15786 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-26lib: Don't require ULZMA compression for postcarLee Leahy
The build fails during postcar when ULZMA compression is not selected. Fix cbfs.c to support LZ compression for ramstage as well. The build error is: build/postcar/lib/cbfs.o: In function `cbfs_load_and_decompress': /home/lee/coreboot/public/src/lib/cbfs.c:116: undefined reference to `ulzman' make: *** [build/cbfs/fallback/postcar.debug] Error 1 TEST=Build and run on Galileo Gen2 Change-Id: I7fa8ff33c0d32e0c5ff5de7918e13e6efb1df38e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15841 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26src/lib: Enable display of cbmem during romstage and postcarLee Leahy
Enable the display of cbmem during romstage and postcar. Add a Kconfig value to prevent coreboot images from increasing in size when this feature is not in use. TEST=Build and run on Galileo Gen2 Change-Id: Ib70ad517ebf7d37a7f46ba503b4432c7c04d7ded Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15842 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25lib/bootmode: Use newly-add recovery moduleFurquan Shaikh
Use the newly added check recovery request function from recovery module in vboot2 to check for a pending recovery request. BUG=chrome-os-partner:55431 Change-Id: I354cc094f1e5d0044cf13e5bc28246f058d470c6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15801 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
1. Remove unused functions/structures. 2. Add checks for NULL return values. 3. Change prefixes to vb2 instead of vboot for functions used internally within vboot2/ 4. Get rid of vboot_handoff.h file and move the structure definition to vboot_common.h 5. Rename all functions using handoff structure to have prefix vboot_handoff_*. All the handoff functions can be run _only_ after cbmem is online. 6. Organize vboot_common.h content according to different functionalities. BUG=chrome-os-partner:55431 Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-20tpm2_tlcl: Use signed integer for tpm2_marshal_command return valueDuncan Laurie
The tpm2_marshal_command() function returns a negative value on error, so we must use a signed type for the return value. This was found by the coverity scan: https://scan.coverity.com/projects/coreboot?tab=overview CID:1357675 CID:1357676 Change-Id: I56d2ce7d52b9b70e43378c13c66b55ac2948f218 Signed-off-by: Duncan Laurie <dlaurie@google.com> Found-by: Coverity Scan Reviewed-on: https://review.coreboot.org/15717 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-07-19lib: provide memrange library in romstageAaron Durbin
BUG=chrome-os-partner:52679 Change-Id: I79ffc0749fba353cd959df727fb45ca2ee5c1bf6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15734 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-15AGESA: Use common romstage ram stackKyösti Mälkki
Change-Id: Ie120360fa79aa0f6f6d82606838404bb0b0d9681 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15466 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15lib/version: Correct whitespace alignmentPaul Menzel
Remove and add spaces for a consistent alignment. Change-Id: I612800cd60d97f50737c235465d7d0a87f2251a8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/15596 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-07-14tpm2: implement and use pcr_extend commandVadim Bendebury
TPM PCRs are used in Chrome OS for two purposes: to communicate crucial information from RO firmware and to protect FW and kernel rollback counters from being deleted. As implemented in a TPM1 compatible way, the PCR extension command requires a prebuilt digest to calculate a new PCR value. TPM2 specification introduces a PCR_Event command, where the TPM itself calculates the digest of an arbitrary length string, and then uses the calculated digest for PCR extension. PCR_Event could be a better option for Chrome OS, this needs to be investigated separately. BRANCH=none BUG=chrome-os-partner:50645 TEST=verified that the two PCRs are successfully extended before the RW firmware is called. Change-Id: I38fc88172de8ec8bef56fec026f83058480c8010 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 73388139db3ffaf61a3d9027522c5ebecb3ad051 Original-Change-Id: I1a9bab7396fdb652e2e3bc8529b828ea3423d851 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358098 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org> Reviewed-on: https://review.coreboot.org/15639 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-14tpm2: implement locking firmware rollback counterVadim Bendebury
TPM1.2 is using the somewhat misnamed tlcl_set_global_lock() command function to lock the hardware rollback counter. For TPM2 let's implement and use the TPM2 command to lock an NV Ram location (TPM2_NV_WriteLock). BRANCH=none BUG=chrome-os-partner:50645 TEST=verified that TPM2_NV_WriteLock command is invoked before RO firmware starts RW, and succeeds. Change-Id: I52aa8db95b908488ec4cf0843afeb6310dc7f38b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 2f859335dfccfeea900f15bbb8c6cb3fd5ec8c77 Original-Change-Id: I62f22b9991522d4309cccc44180a5ebd4dca488d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358097 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org> Reviewed-on: https://review.coreboot.org/15638 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13tpm2: fix tpm_write() error reportingVadim Bendebury
The code misses the cases when a response was received but the command failed. This patch fixes the problem. BRANCH=none BUG=chrome-os-partner:50645 TEST=none Change-Id: I3d50a4b67e3592bb80d2524a7c7f264fddbd34ae Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8f4d6185e13beead7156027e1cb40f7944e46569 Original-Change-Id: I914ab6509d3ab2082152652205802201a6637fcc Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358096 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15637 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: add tlcl_force_clear and use it before factory initVadim Bendebury
tlcl_force_clear() needs to be issued each time when the device mode switches between normal/development/recovery. This patch adds command implementation using TPM_Clear TPM2 command, and also invokes it before factory initialization. BRANCH=none BUG=chrome-os-partner:50645 TEST=verified that TPM_Clear command succeeds at factory startup and the boot proceeds normally. Change-Id: Ia431390870cbe448bc1b6f1755ed17953be9bdf1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 347ff17b97da45fa4df547ff32f9dd2c8972cefd Original-Change-Id: I2a0e62527ad46f9dd060afe5e75c7e4d56752849 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358095 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org> Reviewed-on: https://review.coreboot.org/15636 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: use pcr0 dependent nvram space policy definitionsVadim Bendebury
The TPM2 specification allows defining NV ram spaces in a manner that makes it impossible to remove the space until a certain PCR is in a certain state. This comes in handy when defining spaces for rollback counters: make their removal depend on PCR0 being in the default state. Then extend PCR0 to any value. This guarantees that the spaces can not be deleted. Also, there is no need t create firmware and kernel rollback spaces with different privileges: they both can be created with the same set of properties, the firmware space could be locked by the RO firmware, and the kernel space could be locked by the RW firmware thus providing necessary privilege levels. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:55063 TEST=with the rest of the patches applied it is possible to boot into Chrome OS maintaining two rollback counter spaces in the TPM NV ram locked at different phases of the boot process. Change-Id: I889b2c4c4831ae01c093f33c09b4d98a11d758da Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 36317f5e85107b1b2e732a5bb2a38295120560cd Original-Change-Id: I69e5ada65a5f15a8c04be9def92a8e1f4b753d9a Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358094 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15635 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: add TPM_Clear command processingVadim Bendebury
The command is sent in session mode, but has no parameters associated with it. BRANCH=none BUG=chrome-os-partner:50645 TEST=with the following patches verified that TPM_Clear command is handled successfully by the TPM. Change-Id: I3c9151e336084160acd3bb1f36f45b4d5efd4a33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 503ad5e72fd5bd902325d74fd680c17c7c590e36 Original-Change-Id: Ida19e75166e1282732810cf45be21e59515d88e2 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357973 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15634 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: refactor session header marshallingVadim Bendebury
For coreboot TPM2 the use case session header is always the minimal possible size, the only difference is that some commands require one and some require two handles. Refactor common session header marshalling code into a separate function. This will be useful when more commands marshalling code is added. BRANCH=none BUG=chrome-os-partner:50645 TEST=flashed the TPM and rebooted the device a few times, it successfully loaded chrome os on every attempt. Change-Id: I9b1697c44f67aab32b9cd556b559a55d5050be06 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: a97a7fa16ceeb484e90e2e1f0573e58a468350b2 Original-Change-Id: I86e6426be5200f28ebb2174b418254018e81da8e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357972 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15633 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: clean up tpm_marshal_command()Vadim Bendebury
The function is reusing some variables which confuses the reader as the variable names do not match their second function. This patch edits the code for readability without changing functionality. BRANCH=None BUG=chrome-os-partner:50465 TEST=with the rest of the patches applied Kevin still boots into chrome OS. Change-Id: I396206a64403229ba3921a47b5a08748d8a4b0a3 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3cf02c365d098c9d2ca57def7cf349ef2291d140 Original-Change-Id: I95a07945d9d2b00a69d514014f848802b82dd90f Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358915 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15611 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-13tpm2: avoid comparison between signed and unsigned intsVadim Bendebury
The marshaling/unmarshaling code is using integer values to represent room left in the buffer, to be able to communicate three conditions: positive number means there is room left in the buffer, zero means that the exact amount of data in the buffer was unmarshaled and negative value means that the result of the operation did not fit into the buffer. The implementation is wrong though, as it compares directly signed and unsigned values, which is illegal, as signed values get promoted to unsigned by the compiler. This patch changes the marshaling code to use size_t for the size, and use zero as marshaling failure indication - after all the buffer where the data is marshaled to should definitely be large enough, and it is reasonable to expect at least some room left in it after marshaling. The unmarshaling situation is different: we sure want to communicate errors to the caller, but do not want to propagate error return values through multiple layers. This patch keeps the size value in int, but checks if it is negative separately, before comparing with positive values. BRANCH=none BUG=chrome-os-partner:50645 TEST=with the rest of the patches applied kevin successfully boots up. Change-Id: Ibfbd1b351e35e37c8925a78d095e4e8492805bad Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b1e862c2a650fa5f6cb25a01fe61e848a696cf17 Original-Change-Id: Ie7552b333afaff9a1234c948caf9d9a64447b2e1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358772 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15610 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13tpm2: drop unused structuresVadim Bendebury
Some structures were included in tpm2_tlcl_structures.h that are not needed for tpm2 commands used by coreboot. Drop them from the include file. BRANCH=none BUG=none TEST=coreboot image for gru/kevin still builds fine. Change-Id: Id3a01f7afbddc98b4d14125452ae6a571f1b19cb Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9375eef5a3f5ed2ba216b1cc8a4ce5c78ebe53d8 Original-Change-Id: I89b46900e5356989f2683d671552ecca5103ef90 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358093 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15608 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13tpm2: remove unused buffer size definitionVadim Bendebury
TPM2 structure definitions use pointers instead of buffers where possible. One structure was left behind. Replace that buffer definition with a pointer to be consistent. BRANCH=none BUG=chrome-os-partner:50645 TEST=compilation succeeds, the code using the changed structure in the upcoming patches allows to successfully boot chrome OS on Kevin Change-Id: Iea59943aa0ad6e42fcd479765a9ded0d7a1680d7 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 02b2909b1875ba65cd56cf8e3697a2b67ddaea07 Original-Change-Id: I9856ac516be13f5892ba8af0526708409a297033 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/358771 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12lib/selfboot: clear BSS segmentsAaron Durbin
For some reason the self loader wasn't clearing segments marked as BSS type. Other segments which weren't fully written by the file-backed content were being cleared up to the indicated memsize. Treat segments marked BSS similarly by clearing their content. Change-Id: I9296c11a89455a02e5dd18bba13d4911517c04f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15603 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12lib/selfboot: remove duplicate prog_set_area()Aaron Durbin
There were two successive calls to prog_set_area() which duplicated the same logic. Remove the unnecessary redundancy. Change-Id: I594577f8e7e78d403e7a5656f78e784e98c2c859 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15602 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12lib/selfboot: don't open code linked list operationsAaron Durbin
The list insertion operations were open coded at each location. Add helper functions which provide the semantics needed by the selfboot code in a single place. Change-Id: Ic757255e01934b499def839131c257bde9d0cc93 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15601 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-11tpm2: add marshaling/unmarshaling layerVadim Bendebury
TPM commands need to be serialized (marshaled) to be sent to the device, and the responses need to be de-serialized (unmarshaled) to be properly interpreted by upper layers. This layer does not exist in TPM1.2 coreboot implementation, all TPM commands used there were hardcoded as binary arrays. Availability of the marshaling/unmarshaling layer makes it much easier to add new TPM commands to the code. Command and response structures used in these functions are defined in Parts 2 and 3 of the TCG issued document Trusted Platform Module Library Family "2.0" Level 00 Revision 01.16 October 30, 2014 BRANCH=none BUG=chrome-os-partner:50645 TEST=with the rest of the patches applied it is possible to successfully initialize firmware and kernel TPM spaces. Change-Id: I80b3f971e347bb30ea08f820ec3dd27e1656c060 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0782d9d452efb732e85d1503fccfcb4bf9f69a68 Original-Change-Id: I202276ef9a43c28b5f304f901ac5b91048878b76 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353915 Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org> Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org> Reviewed-on: https://review.coreboot.org/15570 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-11tpm2: implement tlcl layerVadim Bendebury
This is the first approximation of implementing TPM2 support in coreboot. It is very clearly incomplete, some of the larger missing pieces being: - PCR(s) modification - protection NVRAM spaces from unauthorized deletion/modification. - resume handling - cr50 specific factory initialization The existing TPM1.2 firmware API is being implemented for TPM2. Some functions are not required at all, some do not map fully, but the API is not yet being changed, many functions are just stubs. An addition to the API is the new tlcl_define_space() function. It abstracts TMP internals allowing the caller to specify the privilege level of the space to be defined. Two privilege levels are defined, higher for the RO firmware and lower for RW firmware, they determine who can write into the spaces. BRANCH=none BUG=chrome-os-partner:50645 TEST=with the rest of the patches applied Kevin/Gru devices can initialize and use firmware and kernel spaces Change-Id: Ife3301cf161ce38d61f11e4b60f1b43cab9a4eba Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bcc8e62604c705798ca106e7995a0960b92b3f35 Original-Change-Id: Ib340fa8e7db51c10e5080973c16a19b0ebbb61e6 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353914 Original-Commit-Ready: Martin Roth <martinroth@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15569 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-10intel post-car: Consolidate choose_top_of_stack()Kyösti Mälkki
Change-Id: I2c49d68ea9a8f52737b6064bc4fa703bdb1af1df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15463 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-07lib/gpio: add pullup & pulldown gpio_base2_value() variantsAaron Durbin
Provide common implementations for gpio_base2_value() variants which configure the gpio for internal pullups and pulldowns. BUG=chrome-os-partner:54949 BRANCH=None TEST=Built and used on reef for memory config. Change-Id: I9be8813328e99d28eb4145501450caab25d51f37 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15557 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-02gpio: Add support for translating gpio_t into ACPI pinDuncan Laurie
Add a function for an SOC to define that will allow it to map the SOC-specific gpio_t value into an appropriate ACPI pin. The exact behavior depends on the GPIO implementation in the SOC, but it can be used to provide a pin number that is relative to the community or bank that a GPIO resides in. Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659bcf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15512 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01lib: remove ulzma()Aaron Durbin
That function is no longer used. All users have been updated to use the ulzman() function which specifies lengths for the input and output buffers. Change-Id: Ie630172be914a88ace010ec3ff4ff97da414cb5e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15526 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-06-29lib/nhlt: add helper functions for adding endpointsAaron Durbin
In order to ease the porting of supporting NHLT endpoints introduce a nhlt_endpoint_descriptor structure as well as corresponding helper functions. Change-Id: I68edaf681b4e60502f6ddbbd04de21d8aa072296 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15486 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-24region: Add writeat and eraseat supportAntonello Dettori
Implement writeat and eraseat support into the region_device_ops struct. Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24lib: Add real-time-clock functionsSimon Glass
Add functions to convert between seconds and a struct rtc_time. Also add a function that can display the time on the console. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and after setting RTC on the EC: boot on gru into linux shell, check firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:01:44 Then reboot ~10 seconds and check again: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:01:54 Change-Id: Id148ccb7a18a05865b903307358666ff6c7b4a3d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b02dbcd7d9023ce0acabebcf904e70007428d27 Original-Change-Id: I344c385e2e4cb995d3a374025c205f01c38b660d Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351782 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15301 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-09lib: Build reg_script for bootblockLee Leahy
Allow reg_script to be used during the bootblock. TEST=Build and run on Galileo Gen2 Change-Id: I55fe0be3f50116927b801ce67a3f23bb1931f6e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15131 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-09lib: Add asmlinkage attribute to bootblock_main_with_timestampLee Leahy
Add asmlinkage to bootblock_main_with_timestamp so that it may be called directly from the assembly code. TEST=Build for Amenia and Galileo Gen2 Change-Id: Iefb8e5c1ddce2ec495b9272966b595d5adcebc1c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15125 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02cbfs: Use NO_XIP_EARLY_STAGES to decide if stage is XIPFurquan Shaikh
Modern platforms like Apollolake do not use XIP for early stages. In such cases, cbfs_prog_stage_load should check for NO_XIP_EARLY_STAGES instead of relying on ARCH_X86 to decide if a stage is XIP. Change-Id: I1729ce82b5f678ce8c37256090fcf353cc22b1ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15045 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31lib/hardwaremain: Add \n to "Boot failed" messageJonathan Neuschäfer
Change-Id: I106fccd725a5c944f4e8e0f196b31c9344f588c7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-21program.ld: Don't exclude sbe region from verstageStefan Reinauer
This fixes compilation of coreboot on Glados Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> BRANCH=none TEST=emerge-glados coreboot works again BUG=none Change-Id: Ibaae68192a3dc070c6ecf79223da4a1e1f18b352 Reviewed-on: https://chromium-review.googlesource.com/346198 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Luigi Semenzato <semenzato@chromium.org> (cherry picked from commit d7c2c72698e81b1410f9839c77be2e77b8ed83d6) Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14930 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Duncan Laurie <dlaurie@google.com>
2016-05-21gpio: Add a function to map GPIO to ACPI pathDuncan Laurie
Add a new function "gpio_acpi_path()" that can be implemented by SoC/board code to provide a mapping from a "gpio_t" pin to a controller by returning the ACPI path for the controller that owns this particular GPIO. This is implemented separately from the "acpi_name" handler as many SOCs do not have a specific device that handles GPIOs (or may have many devices and the only way to know which is the opaque gpio_t) and the current GPIO library does not have any association with the device tree. If not implemented (many SoCs do not implement the GPIO library abstraction at all in coreboot) then the default handler will return NULL and the caller knows it cannot determine this reliably. Change-Id: Iaa0ff6c8c058f00cddf0909c4b7405a0660d4cfb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14842 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-21hexstrtobin: Add a library function to decode ASCII hex into binaryDuncan Laurie
This function will turn a string of ASCII hex characters into an array of bytes. It will ignore any non-ASCII-hex characters in the input string and decode up to len bytes of data from it. This can be used for turning MAC addresses or UUID strings into binary for storage or further processing. Sample usage: uint8_t buf[6]; hexstrtobin("00:0e:c6:81:72:01", buf, sizeof(buf)); acpigen_emit_stream(buf, sizeof(buf)); Change-Id: I2de9bd28ae8c42cdca09eec11a3bba497a52988c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14837 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-19lib/bootblock: Provide mechanism to pass in an early timestampAlexandru Gagniuc
This is useful, for example, in the bootblock, when a timestamp is available which predates the call to main() in lib/bootblock.c Change-Id: I17bb0add9f2d8721504b2e534dd6904d1201989c Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-05-19lib/timestamp: Do not initialize cache in timestamp_cache_get()Alexandru Gagniuc
timestamp_cache_get() would call timestamp_cache_init() whenever it found a timestamp cache in the TIMESTAMP_CACHE_UNINITIALIZED state. That means that timestamp_cache_get() will never reurn a cache in the uninitialized state. However, timestamp_init() checks against the uninitialized state, as it does not expect timestamp_cache_get() to perform any initialization. As a result, the conditional branch can never be reached. Simply remove the timestamp_cache_init() call from timestamp_cache_get(). Change-Id: I573ffbf948b69948a3b383fa3bc94382f205b8f8 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14861 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-11lib: remove FLASHMAP_OFFSET config variableAaron Durbin
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define. Those 2 values are not consistent. Therefore, remove the Kconfig variable and defer to the #define generated by fmdtool. Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14765 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-09coreboot_tables: Extend serial port descriptionLee Leahy
Extend the serial port description to include the input clock frequency and a payload specific value. Without the input frequency it is impossible for the payload to compute the baud-rate divisor without making an assumption about the frequency. This breaks down when the UART is able to support multiple input clock frequencies. Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device being used as the console UART. Specify this value as zero when the UART is not on the PCI bus. Otherwise specify the device using bus, device and function along with setting the valid bit. Currently the only payload to consume these new fields is the EDK-II CorebootPayloadPkg. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14609 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09lib/prog_loaders: Allow platforms to skip stage cacheFurquan Shaikh
Before multi-CBFS support was added, x86 platforms cached their ramstage in TSEG so that it could be re-used on the resume path. However, more resources/assets are being put in cbfs that are utilized during ramstage. Just caching ramstage does not mean that correct cbfs region is used for all the data. Thus, provide an option to allow platforms to skip caching any component for resume. Change-Id: I0e957a6b859cc7d700aaff67209a17c6558be5de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14636 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-05lib/reg_script: Fix bracesStefan Reinauer
In If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 the code was changed from one to two lines in the body of an if() statement, without adding braces. Change-Id: Ibbbdf240157adae95151fb2ce0135948caa60108 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14621 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-04lib/reg_script: Add display supportLee Leahy
Add the ability to enable the display of the script: * Added REG_SCRIPT_COMMAND_DISPLAY to enable and disable display output * Added context values to manage display support * display_state - Updated by the command to enable or disable display * display_features - May be updated by step routine to control what the step displays for register and value * display_prefix - Prefix to display before register data * Added REG_SCRIPT_DISPLAY_ON and REG_SCRIPT_DISPLAY_OFF macros to control the display from the register script * Added REG_SCRIPT_DISPLAY_REGISTER and REG_SCRIPT_DISPLAY_VALUE as two features of the common display. With these features enabled the following is output: * Write: <optional prefix> register <-- value * Read: <optional prefix> register --> value TEST=Build and run on Galileo Gen2 Change-Id: If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14553 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03lib/cbfs: Use fmap derived information about the COREBOOT regionPatrick Georgi
It used to use CONFIG_CBFS_SIZE. The plan is that CBFS_SIZE only informs default*.fmd generation, while everything else derives its information from there. Also document the existing assumption that boot media should access the COREBOOT region (and not any other potentially existing fmap region containing a CBFS). Change-Id: I08254e4510f71edf99c2c8b56ac8f92008727c4a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14572 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-04-30lib/reg_script: Allow multiple independent handlersLee Leahy
Remove the platform_bus_table routine and replace it with a link time table. This allows the handlers to be spread across multiple modules without any one module knowing about all of the handlers. Establish number ranges for both the SOC and mainboard. TEST=Build and run on Galileo Gen2 Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-30lib/regscript: Add exclusive-or (xor) supportLee Leahy
Add xor support which enables toggling of a bit: * REG_SCRIPT_COMMAND_RXW enum value * REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW * REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW * reg_script_rxw routine to perform and/xor operation * case in reg_script_run_step to call reg_script_rxw TEST=Build and run on Galileo Gen2 Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14495 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-25ensure correct byte ordering for cbfs segment listGeorge Trudeau
Decode each cbfs_payload_segment into native byte order during segments iteration. Note : List ordering has been changed, segments are now always inserted at the end. cbfs_serialized.h PAYLOAD_SEGMENT definitions have been changed to their standard order (big-endian). Change-Id: Icb3c6a7da2d253685a3bc157bc7f5a51183c9652 Signed-off-by: George Trudeau <george.trudeau@usherbrooke.ca> Reviewed-on: https://review.coreboot.org/14294 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-21lib: add common write_tables() implementationAaron Durbin
In order to de-duplicate common patterns implement one write_tables() function. The new write_tables() replaces all the architecture-specific ones that were largely copied. The callbacks are put in place to handle any per-architecture requirements. Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14436 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/coreboot_table: add architecture hooks for adding tablesAaron Durbin
Add a architecture specific function, arch_write_tables(), that allows an architecture to add its required tables for booting. This callback helps write_tables() to be de-duplicated. Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/bootmem: allow architecture specific bootmem rangesAaron Durbin
A architecture-specific function, named bootmem_arch_add_ranges(), is added so that each architecture can add entries into the bootmem memory map. This allows for a common write_tables() implementation to avoid code duplication. Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib: add helper for constructing coreboot forwarding tableAaron Durbin
The x86 architecture needs to add a forwarding table to the real coreboot table. Provide a helper function to do this for aligning the architectures on a common write_tables() implementation. Change-Id: I9a2875507e6260679874a654ddf97b879222d44e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14433 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: remove low coreboot table supportAaron Durbin
In addition to being consistent with all other architectures, all chipsets support cbmem so the low coreboot table path is stale and never taken. Also it's important to note the memory written in to that low area of memory wasn't automatically reserved unless that path was taken. To that end remove low coreboot table support for x86. Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: only print cbmem entries in one placeAaron Durbin
Each arch was calling cbmem_list() in their own write_tables() function. Consolidate that call and place it in common code in write_coreboot_table(). Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14430 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-16program.ld: make sure that zeroptr isn't assigned to debug sectionsPatrick Georgi
Some ld versions seem to merge the .zeroptr section (NOLOAD, address 0) with some debug sections (NOLOAD, address 0) which makes the build explode when the debug sections are then stripped (including the zeroptr symbol). Just define zeroptr to be 0, no sections needed, to avoid this "optimization". Checked the objdump -dS of code using it that the accesses look sane. Change-Id: Ia7cb3e5eae87076caf479d5ae9155a02f74b5663 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14344 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-07edid: Make framebuffer row alignment configurableJulius Werner
Our EDID code had always been aligning the framebuffer's bytes_per_line (and x_resolution dependent on that) to 64. It turns out that this is a controller-dependent parameter that seems to only really be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper function to calculate bits-per-pixel dependent values) probably actually broke this for some other controllers by applying the alignment too widely. This patch makes it explicitly configurable and depends the default on ARCH_X86 (which seems to be the simplest and least intrusive way to make it fit most cases for now... boards where this doesn't apply can still override it manually by calling edid_set_framebuffer_bits_per_pixel() again). Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14267 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
A long time ago many Chrome OS boards had pages full of duplicated boilerplate code for the fill_lb_gpios() function, and we spent a lot of time bikeshedding a proper solution that passes a table of lb_gpio structs which can be concisely written with a static struct initializer in http://crosreview.com/234648. Unfortunately we never really finished that patch and in the mean time a different solution using the fill_lb_gpio() helper got standardized onto most boards. Still, that solution is not quite as clean and concise as the one we had already designed, and it also wasn't applied consistently to all recent boards (causing more boards with bad code to get added afterwards). This patch switches all boards newer than Link to the better solution and also adds some nicer debug output for the GPIOs while I'm there. If more boards need to be converted from fill_lb_gpio() to this model later (e.g. from a branch), it's quite easy to do with: s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/ Based on a patch by Furquan Shaikh <furquan@google.com>. BUG=None BRANCH=None TEST=Booted on Oak. Ran abuild -x. Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14226 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-04-02lib/prog_loading: introduce prog_segment_loaded()Aaron Durbin
In order to not muddle arch vs chipset implementations provide a generic prog_segment_loaded() which calls platform_segment_loaded() and arch_segment_loaded() in that order. This allows the arch variants to live in src/arch while the chipset/platform code can implement their own. Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14214 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-24edid: Add helper function to calculate bits-per-pixel dependent valuesJulius Werner
Coreboot and most payloads support three basic pixel widths for the framebuffer. It assumes 32 by default, but several chipsets need to override that value with whatever else they're supporting. Our struct edid contains multiple convenience values that are directly derived from this (and other properties), so changing the bits per pixel always requires recalculating all those dependents in the chipset code. This patch provides a small convenience wrapper that can be used to consistently update the whole struct edid with a new pixel width instead, so we no longer need to duplicate those calculations everywhere. BUG=None TEST=Booted Oak in all three pixel widths (which it conveniently all supports), confirmed that images looked good. Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14158 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-22gpio: Add support for binary_first base3 number systemJulius Werner
This patch adds support for an alternative ternary number system in which group of GPIOs can be interpreted. In this system, the digit combinations that would form a binary number (i.e. that contain no 'Z' state) are used to represent the lower values in the way they're used in the normal binary system, and all the combinations that do contain a 'Z' are used to represent values above those. We can use this for boards that originally get strapped with binary board IDs but eventually require more revisions than that representation allows. We can switch their code to binary_first base3 and all old revisions with already produced boards will still get read as the correct numbers. Credit for the algorithm idea goes to Haran Talmon. BRANCH=None BUG=None TEST=Stubbed out the actual GPIO reading and simulated all combinations of 4 ternary digits for both number systems. Change-Id: Ib5127656455f97f890ce2999ba5ac5f58a20cf93 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14116 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-22lib/rmodule: export parameters in struct rmod_stage_loadAaron Durbin
In order for a caller to utilize an rmodule's parameters section after calling rmodule_stage_load() export the rmodule's parameter pointer in struct rmod_stage_load. Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14139 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-11cbmem: Fix cbmem_add_bootmem()Andrey Petrov
Change 13363 (555d6c2) introduced a bug where cbmem_add_bootmem() was converted to use a new function. Unfortunately instead of passing a pointer, NULL was passed due to type confusion. This change fixes that problem by passing address of stack variable instead of NULL. Change-Id: Ib8e1add3547cda01f71bf1dea14d3e58bdd99730 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-10cbmem: Add utility to get memory region occupied by cbmemAlexandru Gagniuc
Change-Id: I8e57c23565f173afc0f4d450579b8bfb35aeb964 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10src/lib/trace.c: Make address size genericMartin Roth
On platforms that didn't use 32-bit addresses, enabling the CONFIG_TRACE option (Trace function calls) would break the build due to a cast from a pointer of a different size. This fixes this warning: src/lib/trace.c:29:58: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13962 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-08lib: Implement framework for retrieving WiFi regulatory domainFelix Durairaj
Platforms that need to initialize WRDD package with the regulatory domain information should implement function wifi_regulatory_domain. A weak implementation is provided here. Signed-off-by: fdurairx <felixx.durairaj@intel.com> Reviewed-on: https://chromium-review.googlesource.com/314384 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Commit-Queue: Hannah Williams <hannah.williams@intel.com> Tested-by: Hannah Williams <hannah.williams@intel.com> (cherry picked from commit c25d7221679d1fab830d614eeabfa3436bce6ac1) BUG=chrome-os-partner:50516 BRANCH=glados TEST=build and boot on chell Change-Id: I1cbdf4e940b009c74ee8ed8f4fca85f4f5c943b2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 27bba336e620a2d3d331e350d4f46164e337fabc Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: I84e2acd748856437b40bbf997bf23f158c711712 Original-Reviewed-on: https://chromium-review.googlesource.com/329291 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-26lib/bootblock: provide SoC callback parity with mainboardAaron Durbin
There was no 'early' call into the SoC code prior to console getting initialized. Not having this enforces the mainboard to drive the setup of the console which typically just ends up calling into the SoC code. Provide a SoC early init call to handle this without having to duplicate the same code in mainboards utilizing the same SoC. Change-Id: Ia233dc3ae89a77df284d6d5cf5b2b051ad3be089 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13791 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-26lib/memrange: avoid shadow object declarationsAaron Durbin
Fix an error where a variable named 'free' was shadowing the function 'free'. src/lib/memrange.c:293:73: error: declaration of 'free' shadows a global declaration [-Werror=shadow] Change-Id: Ie57194b392f8f00ed4fd5c76dab27299b00ae293 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13788 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-22cbfs: Add LZ4 in-place decompression support for pre-RAM stagesJulius Werner
This patch ports the LZ4 decompression code that debuted in libpayload last year to coreboot for use in CBFS stages (upgrading the base algorithm to LZ4's dev branch to access the new in-place decompression checks). This is especially useful for pre-RAM stages in constrained SRAM-based systems, which previously could not be compressed due to the size requirements of the LZMA scratchpad and bounce buffer. The LZ4 algorithm offers a very lean decompressor function and in-place decompression support to achieve roughly the same boot speed gains (trading compression ratio for decompression time) with nearly no memory overhead. For now we only activate it for the stages that had previously not been compressed at all on non-XIP (read: non-x86) boards. In the future we may also consider replacing LZMA completely for certain boards, since which algorithm wins out on boot speed depends on board-specific parameters (architecture, processor speed, SPI transfer rate, etc.). BRANCH=None BUG=None TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on Oak to be about ~20ms faster (cutting load times for affected stages almost in half). Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13638 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22fsp_baytrail: Add full support for iosf access in reg_scriptWerner Zeh
Add all needed functions to fsp_baytrail so that reg_script can do full iosf access. To keep it simple, this patch synchronises iosf access between baytrail and fsp_baytrail. Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>