summaryrefslogtreecommitdiff
path: root/src/lib/uart8250mem.c
AgeCommit message (Collapse)Author
2012-05-08Don't loop infinitely long on serial comm failuresStefan Reinauer
If serial uart (8250/16x50) takes abnormally long to respond, give up on logging to serial console and instead let the system boot. Also reference bit in LSR register with correct name. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Ported from 9dd3ef165a1bf1bc404056d3e54337de1a15ac90 to uart8250mem.c: Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Iaca4f57389c887110e6406d45053935891c96838 Reviewed-on: http://review.coreboot.org/826 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-03-09Add support for the Startech PEX1XS1PMINIStefan Reinauer
It has a smaller footprint than the already supported MPEX2S952 Change-Id: Ie36b67f9628882d516ca34ff164f0e8918955a5b Signed-off-by: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/690 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-12Do full flush on uart8250 only at end of printk.Kevin O'Connor
The previous code does a full flush of the uart after every character. Unfortunately, this can cause transmission delays on some serial ports. This patch changes the code so that it does a flush at the end of every printk instead of at the end of every character. This reduces the time it takes to transmit serial messages (up to 9% on my Asrock e350m1 board). It also makes the transmission time more consistent which is important when performing timing tests via serial transmissions. Change-Id: I6b28488b905da68c6d68d7c517cc743cde567d70 Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-on: http://review.coreboot.org/90 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Sven Schnelle <svens@stackframe.org>
2011-04-26Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as anStefan Reinauer
example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1