Age | Commit message (Collapse) | Author |
|
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I592c69e0f52687924fe41189b082c86913999136
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I2cb8676efc1aba1b154fd04c49e53b2530239b4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Change-Id: I1a39f355733d10ecd43a1da541ab2e66ba13db15
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Ioapic information in the devicetree was only used to set up mptables
but this generic driver was removed (ca5a793 drivers/generic/ioapic:
Drop poor implementation).
This removes the unused remainders from mainboard devicetrees.
Remove ioapic setup from sconfig.
Change-Id: Ib3fef0bf923ab3f02f3aeed2e55cf662a3dc3a1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is needed to generate MADT and SRAT where lapicid for threads need
to be added last. When CPUID leaf '0xB' is not present assume some
defaults that would result in identical ACPI code generation.
Change-Id: I2210eb9b663dd90941a64132aa7154440dc7e5a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69222
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't pass the stub params to the mp_init code.
Change-Id: I070bc00ae5e5bceb6c5b90ea833cc057dd41f6cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the current design the relocatable parameters are used to know the
offset of the 32bit startpoint. This requires back and forward
interaction between the stub, the loader and the mp init code. This
makes the code hard to read.
This is static information known at buildtime, so a better way to deal
with this is to generate a header that contains this offset.
Change-Id: Ic01badd2af11a6e1dbc27c8e928916fedf104b5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64625
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's quite confusing to keep track of lapic ID inside the device
struct and initial lapic ID inside an array.
Change-Id: I4d9f8d23c0b0e5c142f6907593428d8509e4e7bb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64342
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch adds new member 'core_type' to the 'struct apic_path' and
updates core type information.
TEST=Build the code for MTL
Change-Id: I1d34068fd5ef43f8408301bf3effa9febf85f683
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
From Meteor Lake onwards Intel FSP will generate the Trace Hub related
HOB if the Trace Hub is configured to save data in DRAM. This memory
region is used by Trace Hub to store the traces for debugging purpose.
This driver locates the HOB and marks the memory region reserved so
that OS does not use it.
Intel Trace Hub developer manual can be found via document #671536 on
Intel's website.
Change-Id: Ie5a348071b6c6a35e8be3efd1b2b658a991aed0e
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This reverts pieces of commit 08135332dd "soc/intel/xeon_sp: Report platform cpu info"
Reason for revert: Due to duplicated definitions this breaks the tree.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I7bcffe99e4f049e38d9a13c82d38464c64250ee1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74002
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use the pstate_msr union in get_pstate_info to check if the P state
enable bit is set. Also drop the now unused PSTATE_DEF_HI_ENABLE_SHIFT
and PSTATE_DEF_HI_ENABLE_MASK definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79119e09af79a4bb680a18e93b4a61a049f0080e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add platform cpu info for known microcode, print cpuid & processor
branding string. This will print as in the following example:
CPU: Intel(R) Xeon(R) Platinum 8468H
CPU: ID 806f6, Sapphire Rapids E3, ucode: 2b000130
CPU: AES supported, TXT supported, VT supported
Change-Id: I9c08fb924aad81608f554523432ab6a549b1b75f
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Several FSP HOBs processing codes are similar to Intel Cooperlake-SP
codes in soc/intel/xeon_sp/cpx.
Register datasheet please reference Sapphire Rapids EDS Vol2 Doc#612246
and Emmitsburg PCH EDS Doc#606161.
Change-Id: Ia022534e5206dbeec946d3e5f3c66bcb5628748f
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The bit position of the P state enable bit in the 8 P state MSRs is
identical for all AMD chips including the family 16h model 30h APU that
lives outside of soc/amd. The other bits in those 8 MSRs are more or
less family- and model-specific.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The XHCI code does not currently contain a structure that corresponds
to the XHCI capability registers. These registers contain various
useful information about the controller. Create a`xhci_capability_regs`
struct to address this.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: If38bfde726bd4e5dd314456f25a2b08acd3cd20c
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The XHCI device functions currently use functions that require a
access to the device tree. Create variant of these functions that can
operate with a resource* as an argument and refactor the existing
device*-based functions to operate by calling the resource*-based
variants. This is useful for stages like SMM that may not have access to
the device tree.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on skyrim device, verified that XHCI ACPI tables are still
generated correctly.
Change-Id: If5a74f9529d5dc6031ec968ef5f40a9cad5ffbc4
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
In certain cases data within protected memmory areas like SMRAM could
be leaked or modified if an attacker remaps PCI BARs to point within
that area. Add support to the existing SMM runtime to allow storing
PCI resources in SMRAM and then later retrieving them.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I23fb1e935dd1b89f1cc5c834cc2025f0fe5fda37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For platforms using X2APIC mode add SRAT x2APIC table
generation. This allows to setup proper SRAT tables.
Change-Id: If78c423884b7ce9330f0f46998ac83da334ee26d
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CXL (Compute Express Link) [1] is a cache-coherent interconnect
standard for processors, memory expansion and accelerators.
CXL memory is provided through CXL device which is connected
through CXL/PCIe link, while regular system memory is provided
through DIMMs plugged into DIMM slots which are connected to
memory controllers of processor.
With CXL memory, the server's memory capacity is increased.
CXL memory is in its own NUMA domain, with longer latency
and added bandwidth, comparing to regular system memory.
Host firmware may present CXL memory as specific purpose memory.
Linux kernel dax driver provides direct access to such differentiated
memory. In particular, hmem dax driver provides direct access to
specific purpose memory.
Specific purpose memory needs to be represented in e820 table as
soft reserved, as described in [2].
Add IORESOURCE_SOFT_RESERVE resource property to indicate (memory)
resource that needs to be soft reserved.
Add soft_reserved_ram_resource macro to allow soc/mb code to add
memory resource as soft reserved.
[1] https://www.computeexpresslink.org/
[2] https://web.archive.org/web/20230130233752/https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.32&id=262b45ae3ab4bf8e2caf1fcfd0d8307897519630
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ie70795bcb8c97e9dd5fb772adc060e1606f9bab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52585
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Fix typo in the comment for Common Clock Configuration.
Change-Id: Idd01e787458a9090d53b9a57547b8158480dcc16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Add a Kconfig RUNTIME_CONFIGURABLE_SMM_LOGLEVEL that enables
mainboard to override mainboard_set_smm_log_level for SMM log level.
This can let SMM have different log level than other stages for
more flexibility.
Another reason is that getting certain data that requires searching
from flash VPD or CMOS is not very ideal to be done in SMM, so in this
change the value can be passed via the member variable in struct
smm_runtime and be referenced directly in SMM.
One example is that mainboard can get the desired SMM log level from
VPD/CMOS, and pass SMM console log level via the variable and in SMM
it can be referenced in get_console_loglevel() override function
directly.
Tested=On OCP Delta Lake, verified SMM log level can be overridden.
Change-Id: I81722a4f1bf75ec942cc06e403ad702dfe938e71
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49460
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Some platforms have an onboard speaker which could be used as an
indicator of successful boot or critical error, e.g. in die_notify
function. The function assumes that SPKR GPIO is properly configured
by the platform code.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8189b3462bb5140af352fa786db3a6a2a45076f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Allow other drivers to use the SMMSTORE region device.
Change-Id: I6316b703829590bd6f41c3d4013b4a4660b9cbab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
acpigen_write_rom open-codes this functionality, so add a function for
this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief25dd854d1639a295c021e9d02c05b4cc61109c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The patch adds support for new Meteor Lake MCH (ID:0x7d16).
TEST=Build and boot the system having MCH ID:0x7d16.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib0c9ce5c58e4bdec5e7245840f0892d651922cd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
The desktop 9 series PCHs should be the same as the 8 series PCHs.
Change-Id: Iee93fee4f28b88a72c537944159fb7cbb2796235
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
1. add functions to generate if greater than conditions:
acpigen_write_if_lgreater_op_op:
if (op1 > op2)
acpigen_write_if_lgreater_op_int:
if (op > val)
acpigen_write_if_lgreater_namestr_int:
if (namestr > val)
2. add function to assignal value to a namestr
acpigen_write_store_namestr_to_op:
namestr = val
TEST=Use above functions and check the generated SSDT table after OS
boot.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iffe1b23362a7ab58bdc2aa8daf45cd6f086ee818
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72825
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The AMD SimNow tool supports fast logging through an IO port. Add a new
console to support SimNow logging through port 80.
TEST=observe significant speed improvements on SimNow console log
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42a431f48ea14ba4adacbd4a32e15abe7c5e4951
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix EVENT_OP value according to ACPI specs:
https://uefi.org/specs/ACPI/6.5/20_AML_Specification.html?highlight=aml%20byte%20stream%20byte%20values#aml-byte-stream-byte-values
Change-Id: I8c531e95f4fc741926bc883d869816f534ff3b7f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific
postcodes into the common postcode list, and uses it for the
cache-as-RAM init as needed.
Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in
most of the others, the values were consolidated into 0x21. This will
change the value on some platforms.
Any conflicts should get sorted out later in the conversion process.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8527334e679a23006b77a5645f919aea76dd4926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add extended capability ID for Address Translation Services. This
definition can be found in PCI Express Base Specification rev6.0
9.3.7.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I777070ea223fc7e83c510c8eadbe4e028825eef6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71929
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
By default this limits PCI buses to CONFIG_MMCONF_BUS_NUMBER.
Some platforms have multiple PCI root busses (e.g. xeon_sp), where bus
numbers are limited. This provides a basic check. On some platforms it
looks like programming 0xff to the subordinate bus number confuses and
hangs the hardware.
Change-Id: I0582b156df1a5f76119a3687886c4d58f2d3ad6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
No BS_ON_EXIT hooks are run on BS_PAYLOAD_BOOT or BS_OS_RESUME, so don't
allow these hooks.
Change-Id: I318165f0bd510aed3138d3612dd3e264901aba96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Neither TOP_MEM_MASK nor TOP_MEM_MASK_KB is used, so drop the two
definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b2dfb7be27884dffb948876aabb73f99834c281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The ACPI PROCESSOR_OP has been deprecated in ACPI 6.0 and dropped in
ACPI 6.4 and is now permanently reserved. As a replacement, DEVICE_OP
with the special HID ACPI0007 should be used instead. This special HID
was introduced in version 3 of the ACPI spec. To have a function to
generate this, acpigen_write_processor_device is introduced. The CPU
index is used as UID which can be assumed to be unique.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb0da903a972be134bb3b9071f81b441f60917d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72469
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Useful to see which architecture x86_32 or x86_64 coreboot was built for.
Change-Id: I34eec64ac32254c270dcbb97e20a7e6be0f478fc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
This functionality is used in multiple places, so factor it out into a
function. Compared to acpigen_write_processor_cnot, the buffer size is
decreased from 40 to 16 bytes, but the format string specified by
CONFIG_ACPI_CPU_STRING results in 9 chars and a NULL byte which will fit
into the buffer without any issue. I've seen the CPU devices being put
into another scope within \_SB, but even in that case that would be 14
chars and a NULL byte whist still fits into the 16 byte buffer. For
acpigen_write_processor and acpigen_write_processor_package this doesn't
change any edge case behavior. In the unrealistic case of the format
string resulting in a longer CPU device string, this would have been a
problem before this patch too.
Also drop the curly braces of the for loop in
acpigen_write_processor_package. This makes the code a bit harder to
read and isn't a very good idea, but with the curly braces in place, the
linter breaks the build :(
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5d8291a2aaae2011cb185d72c7f7864b6e2220ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72452
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
add functions for concatenate OP
add debug message containing concatenated string with string, value, or
OPs
Ex1: to print string with another string provided from C side:
acpigen_write_debug_concatenate_string_string("Wait loop Timeout! var=",
name, LOCAL6_OP);
will generate:
Concatenate ("Wait loop Timeout! var=", "L23E", Local6)
Debug = Local6
Ex2: to print string with a value:
acpigen_write_debug_concatenate_string_int("ModPHY enabling for RP:",
pcie_rp, LOCAL0_OP);
will generate:
Concatenate ("ModPHY enabling for RP:", 0x05, Local0)
Debug = Local0
Ex3: to print string with an ACPI OP:
acpigen_write_debug_concatenate_string_op("while Loop count: ",
LOCAL7_OP, LOCAL6_OP)
will generate:
Concatenate ("while Loop count: ", Local7, Local6)
Debug = Local6
TEST=Add above functions in the acpigen code and check the generated
SSDT table after OS boot
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I370745efe3d6b513ec2c5376248362a3eb4b3d21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72126
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This function reads out the current value set to output for a GPIO pin.
Ex: GPP_E0 is set to output
int e0_val;
e0_val = gpio_tx_get(GPP_E0);
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ib02b9ab50d378eb163d91aed1576428b49cec2cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72127
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023. The chipset includes Emmitsburg PCH.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I05ed8f753bf63b6cb3035e973eb6a7974edfd673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch supports projects to use _DSM to control USB3 U1/U2
transition per port.
More details can be found in
https://web.archive.org/web/20230116084819/https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-
The ACPI and USB driver of linux kernel need corresponding functions
to support this feature. Please see
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=port_check_acpi_dsm
BUG=b:253402457
TEST=tested on felwinter and found _DSM method is created.
Change-Id: Iffb2498e26352a3f120c097c50587324e311e8ba
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71924
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Intel Ice Lake is unmaintained and the only user of this platform ever
was the Intel CRB (Customer Reference Board). As it looks like, it was
never ready for production as only engineering sample CPUIDs are
supported.
As announced in the 4.19 release notes, remove support for Intel
Icelake code and move any maintenance on the 4.19 branch.
This affects the following components and their related code:
* Intel Ice Lake SoC
* Intel Ice Lake CRB mainboard
* Documentation
Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP
firmware can disable TXT if TXT fails or TPM is already enabled.
On platforms with TXT disabled, the memory can be unlocked using
MSR 0x2e6.
TEST=Able to perform disable_txt on SoC SKUs with TXT enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Sometimes, server platforms may have more than one socket on server
board. However, there's no field to store information about which
socket the DIMM comes from in dimm_info structure.
This patch adds soc_num field in dimm_info structure to store socket
ID of the DIMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I1b9e2b87fda2d7c32ecb8ce9d989795c8b869cea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
values by macros
Macro definitions are from DMTF System Management BIOS (SMBIOS)
Reference Specification (DSP0134) Chapter 7.5.5.
Change-Id: Ifed1d773b0b349f878648b8172fd770a397e9686
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Move specific enum ddr3_module_type to <device/dram/ddr3.h>.
Change-Id: I8fd7892dda26158a5bdd6cd4972c7859a252153e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71547
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move specific enum ddr2_module_type to <device/dram/ddr2.h>.
Change-Id: I748658f9b349bff9b1ebe2c0a6acf71bf2a221ce
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71546
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch provides an API to allow users to output multi-line
messages using VGA framebuffer.
The current limitation with multiline message is that,
vga_line_write() function is unable to understand newline character
hence, eventually output multiple lines separated with a newline
character with a single line statement.
This patch ensures to parse the entire string and split it into
multiple lines based on the newline character and print each line
separately to the VFG framebuffer.
User can choose to align the output video message as per given choice
between left/center/right of the screen
(i.e. enum VGA_TEXT_ALIGNMENT ).
Additionally, added macros to define the horizontal screen alignment
as well. Ideally if user would like to print the video message at the
middle of the screen then the vertical alignment would be
`VGA_TEXT_CENTER` and horizontal alignment would be
`VGA_TEXT_HORIZONTAL_MIDDLE`.
TEST=Able to build and boot Google/Taeko.
While output a video message such as :
"Your device is finishing an update. This may take 1-2 minutes.\nPlease
do not turn off your device."
Without this patch:
Your device is finishing an update. This may take 1-2 minutes. nPlease
do not turn off your device.
With this patch:
(in Left Alignment):
Your device is finishing an update. This may take 1-2 minutes.
Please do not turn off your device.
(in Right Alignment):
Your device is finishing an update. This may take 1-2 minutes.
Please do not turn off your device.
(in Center Alignment):
Your device is finishing an update. This may take 1-2 minutes.
Please do not turn off your device.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib837e4deeba9b84038a91c93a68f03cee3474f9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch adds a new section to the coding style which codifies
existing practices about how to handle errors and how to use the die()
and assert() macros. Also clean up some references to Linux-specific
facilities that do not exist in coreboot in the adjacent function return
type guidelines, and add a small blurb of documentation to the
definition of the assert() macro itself.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ice37ed9f995a56d69476e95a352209041b337284
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70775
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds ISH ID for ADL-P to ensure dynamic ASL code is
added into SSDT.
With this patch:
Scope (\_SB.PCI0.ISHB)
{
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I48dc6056155824239bb88eda2b0ff5bcd36ced15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71262
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I38e4b8c6adfaaa45377b2fbe0644285d21841cd1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Use fw_config field to return sar filename instead of fw_config probe.
Return filename unconditionly because the sar_id must be valid in
CBI. If invalid sar_id, the file won't exist in CBFS by design.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7b75c5d4fd3c459ad7232bb16c6218a6218f1f77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Return UNDEFINED_FW_CONFIG with disabled fw_config.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0d31ff3ba7706039c622bd1ec825d216a0f21fe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Root Complex Event Collector Endpoint Association Extended
Capability is defined in section 7.9.10 of PCIe 5.0 spec.
Add its Extended Capability ID, association bitmap for RCiEPs
register, and RCEC associated bus numbers register.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I7bede8ed88304a2925e6e1e4128bcdd625ee0e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add system agent ID for RPL QDF#Q2MB/Q2PS
TEST=able to build coreboot successfully
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: I169c8bc51cdf7fbfcdb1996d93afa4a352e2fddf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71121
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
<types.h> provides <commonlib/bsd/cb_err.h>, <stdint.h> and <stddef.h>.
Change-Id: I966303336e604b1b945df77e5d4c3cccbf045c56
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Adapted from WIP (and abandoned) patch CB:25334, this patch:
1. Ensures SSP endpoint InstanceId is 0
2. Adds capability_size parameter at the end of the nhlt
3. Adsd more config_type enum values to accommodate feedback stream
4. Programs virtual_slot values for max98373, max98927,
and rt5514 nhlt files
5. Adds NHLT feedback_config parameters
Default feedback configs are added here to the max98373, max98927, and
rt5514 codecs; in a follow-on patch, these will be overridden at the
board level.
TEST=tested with subsequent patch
Change-Id: I59285e332de09bb448b0d67ad56c72a208588d47
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
|
|
Add missing CNVI IDs for ADL -
ADL-P: 0x51f2, 0x51f3
ADL-S: 0x7af1, 0x7af2, 0x7af3
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I189be9a8c8895a93d98886e6591e771bbce5f564
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
If selected, libgnat is linked into romstage. In addition, a call to
romstage_adainit() is added to support Ada program data
initialization.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Ada code compiles for romstage and loads successfully
Change-Id: I74f0460f6b14fde2b4bd6391e1782b2e5b217707
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70274
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In some cases, fw_config is used for ids like sar_id, sku_id etc.
To avoid calling fw_config_probe over and over, hence provide the
method to return the value then caller can use the switch case
instead of if else statement.
TEST=get fw_config field value on nivviks.
[INFO ] fw_config get field name=DB_USB, mask=0x3, shift=0, value =0x1
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Iae89668e8fe7322d5a4dcbf88a97d7ed36619af5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This was done previously for ADL. moving the code to common so
it can be leveraged for other platforms (e.g. MTL)
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I45eded3868a4987cb5eb0676c50378ac52ec3752
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
When gpio.h gets directly or indirectly included in the DSDT ar an
assembly file, everything but the preprocessor defines for the GPIOs
shouldn't be included to keep IASL or the assembler happy.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I046ed87d3947ba5b1fcd0bdd4cffcda57bc13404
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70509
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=Dump SSDT and see that _PRW and _DSD for CNVi device contains
the value from the devicetree on google/redrix.
Before:
Scope (\_SB.PCI0.WFA3)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
...
}
After:
Scope (\_SB.PCI0.CNVW)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
...
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia4ffedcb53afe350694eb03a144d12f714190cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70447
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no need to pass the CPU index around.
Change-Id: Iad8e3cb318e6520ac5877118dbf43597dedb75b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This pragma says to IWYU (Include What You Use) that the current file
is supposed to provide commented headers.
Change-Id: Iedd798eebf3376b7631fc9aa1ca0ba92867382bd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70520
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add Memory Error Section definitions from UEFI Specification rev 2.10
appendix N.2.5. The structure defined here may be used for machine
check handling.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I0a165350a16a4cbe4033a3e7c43fa23a5b27c44b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There are four requirements for the SMI to hit a printk()
this commit now removes.
Build must have DEBUG_SMI=y, otherwise any printk() is a no-op
inside SMM.
ASL must have a TRAP() with argument 0x99 or 0x32 for SMIF value.
Platform needs to have IO Trap #3 enabled at IO 0x800.
The SMI monitor must call io_trap_handler for IO Trap #3.
At the moment, only getac/p470 would meet the above criteria
with TRAP(0x32) in its DSDT _INI method. The ASL ignores any
return value of TRAP() calls made.
A mainboard IO trap handler should have precedence over
a southbridge IO trap handler. At the moment we seem to have
no cases of the latter to support, so remove the latter.
Change-Id: I3a3298c8d9814db8464fbf7444c6e0e6ac6ac008
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reads back the ioapic id from hardware.
Change-Id: I214557bbe963d1086f35f96efb1cb47950099eb3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70267
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=Verified SSDT on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5bb432dd4e8f320d2c0d7f378dc2d7b3a770b541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70063
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create a common method to add DmaProperty.
BUG=b:259716145
TEST=Verified SSDT on google/osiris.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I75b3f22ad29f90f3c3b251bd0d70bae9d75f71fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70022
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch extends the available device paths with a new device 'mdio'.
MDIO is the 'Management Data Input/Output' called interface which is
used to access an Ethernet PHY behind a MAC to change settings. The real
payload data path is not handled by this interface.
To address the PHY correctly on the MDIO bus, there is a 5 bit address
needed, which often can be configured via pins on the mainboard.
Therefore, the new introduced device has an 'addr' field to define its
address. If one wants to use a MDIO device in devicetree, the syntax is
straight forward (example):
device mdio 0x2 on end
As the MDIO interface is driven by the MAC, most likely this MDIO device
will be hooked in as a child device of the (PCI attached) MAC device.
With the new introduced ops_mdio a new interface is added to provide an
API for read and write access over MDIO.
Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie6def0dab9ac37c0938b73d27148a49531c6b17f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69802
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7af61404d11f7e0ff5f30c42958c4dd9318538fa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Add Meteor Lake MCH device ID 0x7d15.
TEST=Build and verify boot on MTL RVP
With patch, coreboot log:
`[DEBUG] MCH: device id 7d15 (rev 00) is Meteorlake P`
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If46b01910239173cd74bf6eebc69a81291b6e15a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6d8efe783e6cc5413c3fd0583574a075a2c3876b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Idca56583c1c8dc41ad11d915ec3e8be781fb4e48
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add new IGD device.
Reference: EDS Vol 1 (640228)
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com>
Change-Id: Iad69f547a981390ef3749256e9fd9bcfc106fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These were dropped with LEGACY_SMP_INIT.
Change-Id: Iecaf9ba3d31d22311557b885b31e98a0edd74d96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add definitions for Link Capability and Slot Capability and these
definitions may be used in smbios type 9.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Id66710d5569a7247d998cab20c2e41f2e67712cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This makes it easier to get the content of an msr into a full 64bit
variable.
Change-Id: I1b026cd3807fd68d805051a74b3d31fcde1c5626
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68572
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Read I/O APIC ID and vector counts from hardware.
Change-Id: Ia173582eaad305000f958c5d207e9efaa06d8750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add definition for smbios type 4 and type 9
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I559995b0204f8e5bdeef2c0f8b394f9011d72240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The deadlock prevention is also needed with CONFIG_X2APIC_RUNTIME when
the cpu is in x2apic mode.
TESTED: Fixes SMI generation on xeon_sp hardware with
CONFIG_X2APIC_RUNTIME.
Change-Id: I6a71204fcff35e11613fc8363ce061b348e73496
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|