summaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2012-07-26ELOG: Fix reporting of developer/recovery modesDuncan Laurie
Recent changes in EC/Vboot/U-boot have completely broken the logging of developer and recovery modes. Recovery mode may not be in VBNV, so if that is zero and yet we are in recovery mode then assume it is there because the button/key was pressed. Since there may not be any actual developer mode switch we look if option rom is loaded and the system is not in recovery mode and consider that as developer mode. Change-Id: I70104877b24de477217e1ff5b3a019aef22343ec Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Log event for abnormal management engine statusDuncan Laurie
This will log if the ME is disabled or has an error. 1) disable ME via EC console: gpioset PCH_HDA_SDO 1 2) boot the device 3) read eventlog with "mosys eventlog list" 71 | 2012-07-13 10:10:55 | Management Engine | Disabled Change-Id: I9f6ee452d2aea76e6a5ea2cd50a50ff36245692a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1345 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26USBDEBUG: buffer up to 8 bytesSven Schnelle
EHCI debug allows to send message with 8 bytes length, but we're only sending one byte in each transaction. Buffer up to 8 bytes to speed up debug output. Change-Id: I9dbb406833c4966c3afbd610e1b13a8fa3d62f39 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1357 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-07-26ELOG: Add support for SMM and kernel GSMI driverDuncan Laurie
The linux kernel contains an SMI driver that was written by me (Duncan) and upstreamed a couple years ago called GSMI. This driver will format a parameter buffer and pass pointers to this parameter buffer to the SMI handler. It uses this to generate events for kernel shutdown reasons: Clean, Panic, Oops, etc. This function expects to be passed pointers into the SMM state save area that correspond to the prameter buffer and the return code, which are typically EAX and EBX. The format of the parameter buffer is defined in the kernel driver so we implement the same interface here in order to be compatible. GSMI_CMD_HANDSHAKE: this is an early call that it does to try and detect what kind of BIOS is running. GSMI_CMD_SET_EVENT_LOG: this contains a parameter buffer that has event type and data. The kernel-specific events are translated here and raw events are passed through as well which allows any run-time event to be added for testing. GSMI_CMD_CLEAR_EVENT_LOG: this command clears the event log. First the gsmi driver must be enabled in the kernel with CONFIG_GOOGLE_GSMI and then events can be added via sysfs and events are automatically generated for various kernel shutdown reasons. These can be seen in the event log as the 'Kernel Event' type: 169 | 2012-06-23 15:03:04 | Kernl Event | Clean Shutdown 181 | 2012-06-23 16:26:32 | Kernl Event | Oops 181 | 2012-06-23 16:26:32 | Kernl Event | Panic Change-Id: Ic0a3916401f0d9811e4aa8b2c560657dccc920c1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1316 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25SMM: rename tseg_fixup to tseg_relocate and exportDuncan Laurie
This function is exported so it can be used in other places that need similar relocation due to TSEG. Change-Id: I68b78ca32d58d1a414965404e38d71977c3da347 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1310 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25Extend smbios api to allow runtime change of mainboard serial and versionChristian Gmeiner
This patch extends the current smbios api to allow changing mainboard serial and version during coreboot runtime. This is helpful if you have an EEPROM etc. to access these informations and want to add some quirks for broken hardware revision for the linux kernel. This could be done via DMI_MATCH marco. Change-Id: I1924a56073084e965a23e47873d9f8542070423c Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1232 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-25ELOG: Add support for a monotonic boot counter in CMOSDuncan Laurie
This maintains a 32bit monotonically increasing boot counter that is stored in CMOS and logged on every non-S3 boot when the event log is initialized. In CMOS the count is prefixed with a 16bit signature and appended with a 16bit checksum. This counter is incremented in sandybridge early_init which is called by romstage. It is incremented early in order notice when reboots happen after memory init. The counter is then logged when ELOG is initialized and will store the boot count as part of a 'System boot; event. Reboot a few times and look for 'System boot' events in the event log and check that they are increasing. Also verify that the counter does NOT increase when resuming from S3. 171 | 2012-06-23 16:02:55 | System boot | 285 176 | 2012-06-23 16:26:00 | System boot | 286 182 | 2012-06-23 16:27:04 | System boot | 287 189 | 2012-06-23 16:31:10 | System boot | 288 Change-Id: I23faeafcf155edfd10aa6882598b3883575f8a33 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1315 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25ELOG: Add support for generating SMBIOS type15 tableDuncan Laurie
This standared SMBIOS 0able describes the location and format of the event log to the OS and applications. In this case the pointer is a 32bit physical address pointer to the log in memory mapped flash. Look for SMBIOS type15 entry with 'dmidecode -t 15' Handle 0x0004, DMI type 15, 23 bytes System Event Log Area Length: 4095 bytes Header Start Offset: 0x0000 Header Length: 8 bytes Data Start Offset: 0x0008 Access Method: Memory-mapped physical 32-bit address Access Address: 0xFFB6F000 Status: Valid, Not Full Change Token: 0x00000000 Header Format: OEM-specific Supported Log Type Descriptors: 0 Change-Id: I1e7729e604000f197e26e69991a2867e869197a6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1314 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SMM: Fix state save map for sandybridge and TSEGDuncan Laurie
There are enough differences that it is worth defining the proper map for the sandybridge/ivybridge CPUs. The state save map was not being addressed properly for TSEG and needs to use the right offset instead of pointing in ASEG. To do this properly add a required southbridge export to return the TSEG base and use that where appropriate. Change-Id: Idad153ed6c07d2633cb3d53eddd433a3df490834 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1309 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24ELOG: Add support for flash based event logDuncan Laurie
This is based around the SMBIOS event log specification but expanded with OEM event types to support more specific and relevant system events. It requires flash storage and a minimum 4K block (or flash block size) that should be allocated in the FMAP. A copy of the event log is maintained in memory for convenience and speed and the in-memory copy is written to flash at specific points. The log is automatically shunk when it reaches a configurable full threshold in order to not get stuck with a full log that needs OS help to clear. ELOG implements the specification published here: http://code.google.com/p/firmware-event-log/wiki/FirmwareEventLogDesign And is similar to what we use in other firmware at Google. This implementation does not support double-buffered flash regions. This is done because speed is valued over the log reliability and it keeps the code simpler for the first version. This is a large commit and by itself it just provides a new driver that is made available to coreboot. Without additional patches it is not very useful, but the end result is an event log that will contain entries like this: 171 | 2012-06-23 16:02:55 | System boot | 285 172 | 2012-06-23 16:02:55 | EC Event | Power Button 173 | 2012-06-23 16:02:55 | SUS Power Fail 174 | 2012-06-23 16:02:55 | System Reset 175 | 2012-06-23 16:02:55 | ACPI Wake | S5 Change-Id: I985524c67f525c8a268eccbd856c1a4c2a426889 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1311 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Implement stack overflow checking for the BSPRonald G. Minnich
Previous patches implemented stack overflow checking for the APs. This patch builds on the BSP stack poisoning patch to implement stack overflow checking for the BSP, and also prints out maximum stack usage. It reveals that our 32K stack is ridiculously oversized, especially now that the lzma decoder doesn't use a giant 16K on-stack array. Break the stack checking out into a separate function, which we will later use for the APs. CPU0: stack from 00180000 to 00188000:Lowest stack address 00187ad8 To test failure, change the DEADBEEF stack poison value in c_start.S to something else. Then we should get an error like this: Stack overrun on BSP.Increase stack from current 32768 bytes CPU0: stack from 00180000 to 00188000:Lowest stack address 00180000 Separate the act of loading from the act of starting the payload. This allows us better error management and reporting of stack use. Now we see: CPU0: stack from 00180000 to 00188000:Lowest stack address 00187ad8 Tested for both success and failure on Link. At the same time, feel free to carefully check my manipulation of _estack. Change-Id: Ibb09738b15ec6a5510ac81e45dd82756bfa5aac2 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add code to read Intel microcode from CBFSVadim Bendebury
When CONFIG_MICROCODE_IN_CBFS is enabled, find the microcode blob in CBFS and pass it to intel_update_microcode() instead of using the compiled in array. CBFS accesses in pre-RAM and 'normal' environments are provided through different API. Change-Id: I35c1480edf87e550a7b88c4aadf079cf3ff86b5d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1296 Tested-by: build bot (Jenkins)
2012-07-24Add support for HM70 and NM70 LPC bridgeStefan Reinauer
This lets the SPI driver and the LPC driver know about HM70 and NM70. Change-Id: Id2f1e0e5586a2f7200b2d24785df3f2be890da98 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1300 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Add uartmem_init prototype.Marc Jones
The oxpcie ramstage code calls uartmem_init after the PCI memory allocation, but hte function was static and didn't have a prototype. Change-Id: Iabc1a3d248aeaed29aaaa22504defac97c572326 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1285 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24RTC: Add defines for standard clock offsetsDuncan Laurie
ELOG reads from RTC to build timestamp structure, the resulting timestamp is decoded when printing events. Change-Id: If26552074f18de5095b967b875a0ac1d815a5b31 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1302 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Remove unused free() functionStefan Reinauer
Since coreboot is running very short, we don't free memory. Hence, drop (dummy) free() Change-Id: I6e2737f07c6b9f73ebfad7d124b97a57cb7454a3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1274 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SPI flash layer: remove unused function spi_flash_free()Stefan Reinauer
We don't ever free memory in coreboot, hence drop spi_flash_free() and spi_free_slave() Change-Id: I0ca3f78574ceb4516e7d33c06ab1a58abfb3b0ec Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1273 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-20Allow shutting down internal graphics if plugin graphics are preferredPatrick Georgi
VGA is this part-legacy thing that can cause trouble... For this, introduce device_t->disable(dev) method, in which a driver can take care to deregister the device if necessary. Change-Id: I3fecec07f402e530458b79eda30b2c274101fefa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1251 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-16Change uma_resource() to use new type IORESOURCE_UMA_FB.Kyösti Mälkki
MTRR setup code can detect this and mark it as UC/WT/WC as suitable for the specific hardware. Change-Id: Ib7a3d450fc7c19e3ca72767dfb350412dd35c971 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1214 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Add global uma_resource()Kyösti Mälkki
Like ram_resource(), but reserved and not cacheable. Switch all AMD northbridges to use this one. Change-Id: I88515c6a0f59f80fd8607c390d0d4a2a35d805f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-13MPTAPLE: generate from devicetree.cbSven Schnelle
This patch adds support for autogenerating the MPTABLE from devicetree.cb. This is done by a write_smp_table() declared weak in mpspec.c. If the mainboard doesn't provide it's own function, this generic implementation is called. Syntax in devicetree.cb: ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN> The ioapic_irq directive can be used in pci and pci_domain devices. If there's no directive, the autogen code traverses the tree back to the pci_domain and stops at the first device which such a directive, and use that information to generate the entry according to PCI IRQ routing rules. Change-Id: I4df5b198e8430f939d477c14c798414e398a2027 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1138 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12Lenovo X60: correct SDHCI write protect polarityJonathan A. Kollasch
Change-Id: I916deffe2c692042f7e54c936902e77770ee69df Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/1205 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-09SMBIOS: Add Type 38 (IPMI) data structureSven Schnelle
Change-Id: I9b9a1c7b1cc4aaba7a4791f898653b6fe41d4fcb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1192 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-07-05PCI Type2 config must dieRonald G. Minnich
PCI Type 2 config was a strange and never-used config mechanism. It is unlikely that in the 13 years of coreboot's existence that type 2 was ever used; it just made life complicated for everyone. It lived long enough in coreboot to be replaced by mmioconf. Prior to making the device tree visible in romstage we want to get rid of type2. Delete two files we don't need any more (yay!). Replace two functions with one: pci_config_default, which returns a pointer to the default config method. At some future time this may change to mmio but for now it is old type1 style. Change-Id: Icc4ccf379a89bfca8be43f305b68ab45d88bf0ab Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1159 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-04Intel cpus: Extend cache to cover complete Flash DeviceKyösti Mälkki
CACHE_ROM_SIZE default is ROM_SIZE, the Flash device size set in menuconfig. This fixes a case where 8 MB SPI flash MTRR setup would not cover the bottom 4 MB when ramstage is decompressed. Verify CACHE_ROM_SIZE is power of two. One may set CACHE_ROM_SIZE==0 to disable this cache. Change-Id: Ib2b4ea528a092b96ff954894e60406d64f250783 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1146 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-03AGESA F15 wrapper for Trinityzbao
The wrapper for Trinity. Support S3. Parme is a example board. Change-Id: Ib4f653b7562694177683e1e1ffdb27ea176aeaab Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1156 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02Intel CPUs: execute microcode update only once per coreKyösti Mälkki
Early HT-enabled CPUs do not serialize microcode updates within a core. Solve this by running microcode updates on the thread with the smallest lapic ID of a core only. Also set MTRRs once per core only. Change-Id: I6a3cc9ecec2d8e0caed29605a9b19ec35a817620 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1142 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-30Add support for Panther Point to SPI driverStefan Reinauer
Change-Id: I98b05d9e639eda880b6e8dc6398413d1f4f5e9c3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1048 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-24cbtypes.h: Unify cbtypes.h used in AMD board's codeVikram Narayanan
Remove all the repeated sections of code in cbtypes.h and place it in a common location. Add include dir in vendor code's Makefile. Change-Id: Ida92c2a7a88e9520b84b0dcbbf37cd5c9f63f798 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/912 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-11Hook up MRC cache updateStefan Reinauer
Requirements: - must be in ramstage (locking flash while executing code from there might not work) - must be after cbmem is reinitialized (so the mrc cache copy of the current run can be found) Change-Id: I8028fb073349ce2b027ef5f8397dc1a1b8b31c02 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1002 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-10Add SPI flash driverStefan Reinauer
This driver is taken from u-boot and adapted to match coreboot. It still contains some hacks and is ICH specific at places. Change-Id: I97dd8096f7db3b62f8f4f4e4d08bdee10d88f689 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/997 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Add config_enabled() from LinuxPatrick Georgi
This change is taken from Linux. It allows to check for Kconfig definitions in the preprocessor and source code using the same idiom. Long term plan is to remove our Kconfig hack to #define values to 0, and this helps. This includes a tiny modification to the macros to fix romcc support. Change-Id: I0fddbea8c8ca215cf226acf39cb329b0ba0445a5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1005 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-01Allow device ID arrays in the PCI driver structureVadim Bendebury
Many PCI devices share the very same driver despite having different PCI device IDs, which causes a lot of copy and paste of driver definitions. This change introduces a way to specify the array of acceptable device IDs in a single driver entry. As an example the Intel {Sandy|Ivy} Bridge SATA driver is being modified to use a single driver structure for all different SATA controller flavors, a few more Ivy Bridge IDs are being added as well. BUG=none TEST=manual . modified coreboot brought up an Ivy Bridge platform all the way to Linux login screen. Change-Id: I761c5611b93ef946053783f7a755e6c456dd6991 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/982 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-27SMM: unify mainboard APM command handlersStefan Reinauer
rename from mainboard_apm_cnt to mainboard_smi_apmc to match the function naming scheme of the other handlers. Add prototype for mainboard_smi_sleep (mainboard specific S3 sleep handlers in SMM) that is required by Sandybridge. Change-Id: Ib479397e460e33772d90d9d41dba267e4e7e3008 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/933 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-27cpu/cpu.h: add ROMCC guardsStefan Reinauer
In order to use the generic microcode update code in the bootblock, cpu/cpu.h needs ROMCC guards. Also, delete the unused struct device declaration and move the struct bus declaration to where it's used. Change-Id: I0cc731c555593946e931a680ec93994932530599 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/932 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-26Revamp Intel microcode update codeStefan Reinauer
- add GPLv2 + copyright header after talking to Ron - "bits" in struct microcode served no real purpose but getting its address taken. Hence drop it - use asm volatile instead of __asm__ volatile - drop superfluous wrmsr (that seems to be harmless but is still wrong) in read_microcode_rev - use u32 instead of unsigned int where appropriate - make code usable both in bootblock and in ramstage - drop ROMCC style print_debug statements - drop microcode update copy in Sandybridge bootblock Change-Id: Iec4d5c7bfac210194caf577e8d72446e6dfb4b86 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-25Replace cache control magic numbers with symbolsPatrick Georgi
Instead of opaque numbers like (1<<29), use symbols like CR0_NoWriteThrough. Change-Id: Id845e087fb472cfaf5f71beaf37fbf0d407880b5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-16S3 code in coreboot public folder.zbao
1. Move the Stack to high memory. 2. Restore the MTRR before Coreboot jump to the wakeup vector. Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/623 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-12Add support for aligned allocationRon Minnich
Add a memalign function and have malloc use it. Also, change the default alignment for malloc to u64-aligned. Change-Id: I0788637008f5cb5ac801d8bbdc430ca992c98e81 Signed-off-by: Ron Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/887 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-04-06Fixes and Sandybridge support for lapic cpu initStefan Reinauer
- preprocessor macros should not use defined(CONFIG_*) but just CONFIG_* - drop AMD CPU model 14XXX config variable use. Those do not exist. - skip some delays on Sandybridge systems - Count how long we're waiting for each AP to stop - Skip speedstep specific CPU entries Change-Id: I13db384ba4e28acbe7f0f8c9cd169954b39f167d Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/871 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-06Add constants for fast path resume copyingStefan Reinauer
cache as ram does not usually cache the ram before it is up. Hence, if romstage.c backs up resume memory, the involved memcpy is always uncached. This makes resume very slow. On Sandybridge we copy the memory later, after enabling caching, and that allows us to resume in as little as 250ms. Change-Id: I31a71ad4468679d39880cf9a8c4e497bb7addf8f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/872 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05Fill out ChromeOS specific coreboot table extensionsStefan Reinauer
ChromeOS uses two extensions to the coreboot table: - ChromeOS specific GPIO description for onboard switches - position of verified boot area in nvram Change-Id: I8c389feec54c00faf2770aafbfd2223ac9da1362 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/866 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-04Add support to run SMM handler in TSEG instead of ASEGStefan Reinauer
Traditionally coreboot's SMM handler runs in ASEG (0xa0000), "behind" the graphics memory. This approach has two issues: - It limits the possible size of the SMM handler (and the number of CPUs supported in a system) - It's not considered a supported path anymore in newer CPUs. Change-Id: I9f2877e46873ab2ea8f1157ead4bc644a50be19e Signed-off-by: Duncan Laurie <dlaurie@google.com> Acked-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/842 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-04-03Add support for Intel Turbo Boost featureStefan Reinauer
From wikipedia: Intel Turbo Boost is a technology implemented by Intel in certain versions of their Nehalem- and Sandy Bridge-based CPUs, including Core i5 and Core i7 that enables the processor to run above its base operating frequency via dynamic control of the CPU's "clock rate". It is activated when the operating system requests the highest performance state of the processor. Change-Id: I166ead7c219083006c2b05859eb18749c6fbe832 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/844 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-03smbios: add support for onboard devices extended informationStefan Reinauer
Add support for type 41 smbios tables (to be used by board specific smbios handlers) Change-Id: Id6af5e4b1f5c5c78c63759d24fdc7cf8537ae5e6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/843 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-02Add a helper function to determine the number of enabled CPUsStefan Reinauer
Change-Id: Ia72926002571e0f250849fa5db048bd8b2e92400 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/821 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Align: Make sure 1 is treated as unsigned long instead of intStefan Reinauer
... and drop duplicate definition in via/epia-n code. Change-Id: Id79daaaa35c4d412c8c1f621a3638d129681d331 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/820 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Make MTRR min hole alignment 64MBDuncan Laurie
This affects the algorithm when determining when to transform a range into a larger range with a hole. It is needed when for when I switch on an 8MB TSEG and cause the memory maps to go crazy. Also add header defines for the SMRR. Change-Id: I1a06ccc28ef139cc79f655a8b19fd3533aca0401 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add more timestamps in coreboot.Stefan Reinauer
This adds a number of timestamps in ramstage and romstage so we can figure out where execution time goes. Change-Id: Iea17c08774e623fc1ca3fa4505b70523ba4cbf01 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/749 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add timestamps for selfboot and acpi wakeDuncan Laurie
Change-Id: I28224867610b947739d940d25c98399d219f10f4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/733 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-30Add TPM support to corebootStefan Reinauer
and initialize the TPM on S3 resume This patch integrates the TPM driver and runs TPM resume upon an ACPI S3 resume without including any other parts of vboot. We could link against vboot_fw.a but it is compiled with u-boot's CFLAGS (that are incompatible with coreboot's) and it does a lot more than we want it to do. Change-Id: I000d4322ef313e931e23c56defaa17e3a4d7f8cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/731 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-30Add an option to keep the ROM cached after romstageStefan Reinauer
Change-Id: I05f1cbd33f0cb7d80ec90c636d1607774b4a74ef Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-29Add infrastructure for global data in the CAR phase of bootGabe Black
The cbmem console structure and car global data are put in their own section, with the cbmem console coming after the global data. These areas are linked to be where CAR is available and at the very bottom of the stack. There is one shortcoming of this change: The section created by this change needs to be stripped out by the Makefile since leaving it in confuses cbfstool when it installs the stage in the image. I would like to make the tools link those symbols at the right location but leave allocation of that space out of the ELF. Change-Id: Iccfb99b128d59c5b7d6164796d21ba46d2a674e0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-29Detect whether the OXPCIE card is really present while in the ROM stage.Gabe Black
Use an int in CAR global data to store whether or not the OXPCIE serial card is actually there. Also, time out if the card doesn't show up quickly enough, don't continue initialization if it's not there, and don't make the initialization routine default to a card if none is found. Change-Id: I9c72d3abc6ee2867b77ab2f2180e6f01f647af8c Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/728 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29Add support for enabling PCIe Common Clock and ASPMDuncan Laurie
These are guarded by individual Kconfig entries. The deprecated CONFIG_PCIE_TUNING defines have been removed in favor of using specific config options. This is the generic half, there is board-specific pieces still to come that tune before and after ASPM is enabled. Change-Id: I3fe46282eada67629e9eeeed07e487dff54f2729 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/735 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-29Refactor publishing CBMEM addresses through coreboot table.Vadim Bendebury
We need to provide u-boot access to several different CBMEM sections. To do that, a common coreboot table structure is used, just different tags match different coreboot table sections. Also, the code is added to export CBMEM console and MRC cache addresses through the same mechanism. Change-Id: I63adb67093b8b50ee61b0deb0b56ebb2c4856895 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/724 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29Add timestamp table pointer to the coreboot table.Vadim Bendebury
This change exports the timestamp table pointer through coreboot table to make it possible for u-boot to add timestamps to the table. Inclusion of cbmem.h allows to drop external declarations in coreboot_table.c. Change-Id: Ia070198cee7a6ffdaeece03d9d15bd91e033b6d1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/716 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29CBMEM CONSOLE: Add CBMEM type for console buffer.Vadim Bendebury
Add CBMEM type for the console buffer section. Change-Id: I02757c06d71e46af77b02b90b0e6018a37b62406 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29CBMEM CONSOLE: Add CBMEM console driver implementation.Vadim Bendebury
The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29Increase CBMEM to accommodate larger console.Vadim Bendebury
This change adds 128K to the memory amount set aside for CBMEM in case the CBMEM console is enabled (to keep the CBMEM 128K byte aligned). The console buffer size is being set to 64K, which is enough to accommodate the most verbose coreboot console and u-boot console. Change-Id: If583013dfb210de5028d69577675095c6fe2f3ab Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/725 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-28Add cmos helper functions for reading/writing a dwordDuncan Laurie
These get used later for saving/restoring the MRC scrambler seed values on each boot. Change-Id: I6e23f17649bea6d22c4b279ed8d0e5cb6c0885e7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-28Add timestamp collecting to coreboot.Vadim Bendebury
This patch adds code to initialize the time stamp collection facility in coreboot. It adds a table in the CBMEM section, which provides the base timer reading value (all other readings are offsets of this one) and an array of timestamp id/timestamp value pairs. Just two values are being added now, this will have to be used more extensively and also integrated into payloads to provide more comprehensive boot process time measurements. Also, since the CBMEM area could already contain a section (from the previous run, before reset), when processing a section addition request we should check if a section already exists and return its address, if so. Change-Id: I7ed9f5c400bc5432f228348b41fd19a67c36d533 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/713 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-28Initialize CBMEM early.Vadim Bendebury
We want to be able to share data between different phases of firmware (rom stage/ram stage/payload). Coreboot CBMEM seems an appropriate location for this data, but normally it is not initialized until coreboot reaches the ram stage. This change initializes the CBMEM while still in rom stage in case CONFIG_EARLY_CBMEM_INIT is set. Note that there is a discrepancy in how coreboot determines the size of DRAM at rom and ram stages, get_top_of_ram() is used at rom stage and is not defined for all platforms. Those platforms will have to define this function should they enable the CONFIG_EARLY_CBMEM_INIT flag. Change-Id: I81691d45e28de59496fb227f2cca4e8c15ece717 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/711 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-27Add RDC R8610 PCI IDs.Rudolf Marek
Change-Id: I3f3585f15265aa1377f72ba23accf1adb08cb8ac Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/806 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16xchg is atomic with side-effectsPatrick Georgi
clang doesn't know about the side effect, so we have to tell it that it's okay not to care about the result. Change-Id: Ib11890bff6779e36cf09c178d224695ea16a8ae8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/783 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-14Since cbfs_core.h provides a macro that uses ntohl, make sure ntohl is availableGabe Black
Since cbfs_core.h provides a macro that uses ntohl, make sure ntohl is available by including byteorder.h Change-Id: I9ab8cb51bd680e861b28d5130d09547bb9ab3b1f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/709 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-09Increase size of the coreboot table areaStefan Reinauer
Packing a device tree into the coreboot table can easily make the table exceed the current limit of 8KB. However, right now there is no error handling in place to catch that case. Increase the maximum memory usable for all tables from 64KB to 128KB and increase the maximum coreboot table size from 8KB to 32KB. Change-Id: I2025bf070d0adb276c1cd610aa8402b50bdf2525 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/704 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Add helper function to find a Local APIC by ID in the device tree.Duncan Laurie
Change-Id: Ie2d7d8e1f647a0c92d2de09e32454fbea688b1e7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/695 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09move console includes to central console/console.hStefan Reinauer
Because it's included everywhere anyways. Change-Id: I99a9e6edac08df57c50ef3a706fdbd395cad0abc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/691 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Add an implementation for the memchr library functionGabe Black
Change-Id: Icded479d246f7cce8a3d2154c69f75178fa513e1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/708 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-16pci_ids: Add AMD F15h model 00-0f and F10h cpu HT device pci idsKerry Sheh
Change-Id: I13905f5730d08510c8f0f6e652f41a679d618d1b Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/609 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-16AGESA F15: AGESA family15 model 00-0fh cpu wrapperKerry Sheh
Change-Id: I7580bc063c09d99d3fca8b20cd39df2384a6ad44 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/555 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-07Add OPROM mapping support to corebootStefan Reinauer
This allows to add a PCI ID mapping function for option roms so that the same option rom can be used for a series of devices / PCI IDs. Intel and AMD often use the same option rom for a number of PCI devices with differend IDs. A function to implement such a mapping could look like this (or anything else appropriate): /* some vga option roms are used for several chipsets but they only have one * PCI ID in their header. If we encounter such an option rom, we need to do * the mapping ourselfes */ u32 map_oprom_vendev(u32 vendev) { u32 new_vendev=vendev; switch(vendev) { case 0xa0118086: new_vendev=0xa0018086; break; } return new_vendev; } Change-Id: I1be7fe113b895075d43ea48fe706b039cef136d2 Reviewed-on: http://review.coreboot.org/573 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-01-24RD890: pci_ids updateKerry Sheh
RD890 CIMX support AMD RD890TV, RX780, RD780, SR56x0, RD890 and 990FX chipsets, add their pci device id respectively. Change-Id: I30c62c5802279ff2ee8da1cae41395e6899339bb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/558 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-23post code: Replaced hard-coded post code with macroVikram Narayanan
Added a macro in the post code list, which replaces hard coded value in cpu/x86/cache/cache.c Change-Id: I27cb27827272584a8a17a41c111e2dc155196a97 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-12lib: add ram_check_nodieSven Schnelle
The current implementation calls die() if memory checking fails. This isn't always what we want: one might want to print error registers, or do some other error handling. Introduce ram_check_nodie() for that reason. It returns 0 if ram check succeeded, otherwise 1. Change-Id: Ib9a9279120755cf63b5b3ba5e0646492c3c29ac2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/532 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-13Fix CMOS handling for non-USE_OPTION_TABLE configurationPatrick Georgi
The read_option macro still emitted CMOS_VSTART_*/CMOS_VEND_* symbols, which fail without an option table (as no option_table.h defines them). Discard them by using a macro instead of a static inline function. Change-Id: I8d001f971681277a344b6788725746491546b607 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/442 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01Remove XIP_ROM_BASEPatrick Georgi
The base is now calculated automatically, and all mentions of that config option were typical anyway (4GB - XIP_ROM_SIZE). Change-Id: Icdf908dc043719f3810f7b5b85ad9938f362ea40 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/366 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-31Fix usb debug dongle supportSven Schnelle
- move enable_usbdebug() declaration to usbdebug.h - reinitialize debug driver in ramstage, as copying the data structure from romstage doesn't work right now. This way of copying data from romstage to ramstage is really board/cpu specific, and is likely to break often. So don't do it. Change-Id: I394678ded6679c1803e29eb691b926182bdcab68 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Get rid of AUTO_XIP_ROM_BASEPatrick Georgi
That value is now generated from a code address and CONFIG_XIP_ROM_SIZE. This works as MTRRs are fully specified by their size and any address within the range. Change-Id: Id35d34eaf3be37f59cd2a968e3327d333ba71a34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-21Extend coreboot table entry for serial portsStefan Reinauer
Add information about memory mapped/io mapped base addresses. and fix up libpayload to use the same structures Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I5f7b5eda6063261b9acb7a46310172d4a5471dfb Reviewed-on: http://review.coreboot.org/261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-21Add macros for 64bit byte order swappingStefan Reinauer
Change-Id: Ic31ccd41ba3e0af7046eafc29221810d4cd196c8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/275 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-13Enable/fix compilation of i8254 code in ram stage.Stefan Reinauer
Change-Id: I3bbe795d8e6e576be9e94d6cd888e78a116ddbbd Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/254 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
In order to make sure AHCI/RAID ROM works correctly For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should enable bus master and the ahci also should be enabled. Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/248 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03pci_ids: Add sb800 SATA device raid mode device idKerry Sheh
sb800 SATA device have different device id with different configure mode, 4392h for RAID mode, 4393h for RAID5 mode Change-Id: If54f7751f531c94ee725309a2a5c255390935ead Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/226 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15Build warning fix for AMD Family 12efdesign98
This trivial change adds a prototype to an existing header file to fix a build warning for the AMD family 12 cpus. Change-Id: Ic666bfbef867d17607eaa0f59570aea987a31f93 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/218 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-12Miscellaneous AMD F14 warning fixesefdesign98
This commit adds in some more fixes to AMD F14 compile warnings. The change in the mtrr.c file is in prep- aration for changes yet to com, but it is currently innocuous. Change-Id: I6b204fe0af16a97d982f46f0dfeaccc4b8eb883e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-07Add support for the tracing infastructure in coreboot.Rudolf Marek
The compiler is forced to emmit special functions on every entry/exit of the function. Add a compile time option to support it. Function entries will be printed in the console. The CONFIG_TRACE has more documentation. Patch for userspace tools will follow. Change-Id: I2cbeb3f104892b034c8756f86ed05bf71187c3f3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/178 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-26Add automatic SMBIOS table generationSven Schnelle
Change-Id: I0ae16dda8969638a8f70fe1d2e29e992aef3a834 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/152 Tested-by: build bot (Jenkins)
2011-08-18export get_cbfs_header()Sven Schnelle
Change-Id: I4b6afcee3d0d169e03165a7fb48cfaef2e8253e2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/157 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-04split CBFS support into shared core and extended functionsPatrick Georgi
The core is data structures and basic file finding capabilities, while option ROM handling, and loading stages and payloads is "extended". The core is rewritten to be BSD-l (its header already was), so can be copied to libpayload verbatim. It's also more robust in finding files in corrupted images, eg. after partial erase or update. Change-Id: Ic6923debf8bdf3c67c75746d3b31f3addab3dd74 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/114 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04cpu/intel/slot_1: Init L2 cache on SECC(2) CPUs.Keith Hui
Bring from coreboot v1 support for initializing L2 cache on Slot 1 Pentium II/III CPUs, code names Klamath, Deschutes and Katmai. Build tested on ASUS P2B-LS and P3B-F. Boot tested on P2B-LS with Pentium III 600MHz, Katmai core. Also add missing include of model_68x in slot_1, to address a similar problem fixed for model_6bx by r5945. Also change Deschutes CPU init sequence to match Katmai. Change-Id: I502e8481d1a20f0a2504685e7be16b57f59c8257 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 15:26:44 +0000